)]}'
{
  "commit": "ac718bd9b1307ca355c5ad6cfcd520cdd7f6e27d",
  "tree": "da34cabcffc3e2fbd0a7b86f14a2460ecebd22b8",
  "parents": [
    "63ba839d42b2730b42381b0e7bc70e83451eb4d5"
  ],
  "author": {
    "name": "Larysa Zaremba",
    "email": "larysa.zaremba@intel.com",
    "time": "Thu Mar 05 12:12:50 2026 +0100"
  },
  "committer": {
    "name": "Chenglong Tang",
    "email": "chenglongtang@google.com",
    "time": "Sat Apr 11 20:20:19 2026 -0700"
  },
  "message": "xdp: produce a warning when calculated tailroom is negative\n\n[ Upstream commit 8821e857759be9db3cde337ad328b71fe5c8a55f ]\n\nMany ethernet drivers report xdp Rx queue frag size as being the same as\nDMA write size. However, the only user of this field, namely\nbpf_xdp_frags_increase_tail(), clearly expects a truesize.\n\nSuch difference leads to unspecific memory corruption issues under certain\ncircumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when\nrunning xskxceiver\u0027s XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses\nall DMA-writable space in 2 buffers. This would be fine, if only\nrxq-\u003efrag_size was properly set to 4K, but value of 3K results in a\nnegative tailroom, because there is a non-zero page offset.\n\nWe are supposed to return -EINVAL and be done with it in such case, but due\nto tailroom being stored as an unsigned int, it is reported to be somewhere\nnear UINT_MAX, resulting in a tail being grown, even if the requested\noffset is too much (it is around 2K in the abovementioned test). This later\nleads to all kinds of unspecific calltraces.\n\n[ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6\n[ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4\n[ 7340.338179]  in libc.so.6[61c9d,7f4161aaf000+160000]\n[ 7340.339230]  in xskxceiver[42b5,400000+69000]\n[ 7340.340300]  likely on CPU 6 (core 0, socket 6)\n[ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 \u003c4c\u003e 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe\n[ 7340.340888]  likely on CPU 3 (core 0, socket 3)\n[ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff \u003c8b\u003e 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7\n[ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI\n[ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy)\n[ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014\n[ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80\n[ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 \u003c8b\u003e 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89\n[ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202\n[ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010\n[ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff\n[ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0\n[ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0\n[ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500\n[ 7340.418229] FS:  0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000\n[ 7340.419489] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033\n[ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0\n[ 7340.421237] PKRU: 55555554\n[ 7340.421623] Call Trace:\n[ 7340.421987]  \u003cTASK\u003e\n[ 7340.422309]  ? softleaf_from_pte+0x77/0xa0\n[ 7340.422855]  swap_pte_batch+0xa7/0x290\n[ 7340.423363]  zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270\n[ 7340.424102]  zap_pte_range+0x281/0x580\n[ 7340.424607]  zap_pmd_range.isra.0+0xc9/0x240\n[ 7340.425177]  unmap_page_range+0x24d/0x420\n[ 7340.425714]  unmap_vmas+0xa1/0x180\n[ 7340.426185]  exit_mmap+0xe1/0x3b0\n[ 7340.426644]  __mmput+0x41/0x150\n[ 7340.427098]  exit_mm+0xb1/0x110\n[ 7340.427539]  do_exit+0x1b2/0x460\n[ 7340.427992]  do_group_exit+0x2d/0xc0\n[ 7340.428477]  get_signal+0x79d/0x7e0\n[ 7340.428957]  arch_do_signal_or_restart+0x34/0x100\n[ 7340.429571]  exit_to_user_mode_loop+0x8e/0x4c0\n[ 7340.430159]  do_syscall_64+0x188/0x6b0\n[ 7340.430672]  ? __do_sys_clone3+0xd9/0x120\n[ 7340.431212]  ? switch_fpu_return+0x4e/0xd0\n[ 7340.431761]  ? arch_exit_to_user_mode_prepare.isra.0+0xa1/0xc0\n[ 7340.432498]  ? do_syscall_64+0xbb/0x6b0\n[ 7340.433015]  ? __handle_mm_fault+0x445/0x690\n[ 7340.433582]  ? count_memcg_events+0xd6/0x210\n[ 7340.434151]  ? handle_mm_fault+0x212/0x340\n[ 7340.434697]  ? do_user_addr_fault+0x2b4/0x7b0\n[ 7340.435271]  ? clear_bhb_loop+0x30/0x80\n[ 7340.435788]  ? clear_bhb_loop+0x30/0x80\n[ 7340.436299]  ? clear_bhb_loop+0x30/0x80\n[ 7340.436812]  ? clear_bhb_loop+0x30/0x80\n[ 7340.437323]  entry_SYSCALL_64_after_hwframe+0x76/0x7e\n[ 7340.437973] RIP: 0033:0x7f4161b14169\n[ 7340.438468] Code: Unable to access opcode bytes at 0x7f4161b1413f.\n[ 7340.439242] RSP: 002b:00007ffc6ebfa770 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca\n[ 7340.440173] RAX: fffffffffffffe00 RBX: 00000000000005a1 RCX: 00007f4161b14169\n[ 7340.441061] RDX: 00000000000005a1 RSI: 0000000000000109 RDI: 00007f415bfff990\n[ 7340.441943] RBP: 00007ffc6ebfa7a0 R08: 0000000000000000 R09: 00000000ffffffff\n[ 7340.442824] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000\n[ 7340.443707] R13: 0000000000000000 R14: 00007f415bfff990 R15: 00007f415bfff6c0\n[ 7340.444586]  \u003c/TASK\u003e\n[ 7340.444922] Modules linked in: rfkill intel_rapl_msr intel_rapl_common intel_uncore_frequency_common skx_edac_common nfit libnvdimm kvm_intel vfat fat kvm snd_pcm irqbypass rapl iTCO_wdt snd_timer intel_pmc_bxt iTCO_vendor_support snd ixgbevf virtio_net soundcore i2c_i801 pcspkr libeth_xdp net_failover i2c_smbus lpc_ich failover libeth virtio_balloon joydev 9p fuse loop zram lz4hc_compress lz4_compress 9pnet_virtio 9pnet netfs ghash_clmulni_intel serio_raw qemu_fw_cfg\n[ 7340.449650] ---[ end trace 0000000000000000 ]---\n\nThe issue can be fixed in all in-tree drivers, but we cannot just trust OOT\ndrivers to not do this. Therefore, make tailroom a signed int and produce a\nwarning when it is negative to prevent such mistakes in the future.\n\nBUG\u003db/496505334\nTEST\u003dpresubmit\nRELEASE_NOTE\u003dFixed CVE-2026-23343 in the Linux kernel.\n\ncos-patch: security-moderate\nFixes: bf25146a5595 (\"bpf: add frags support to the bpf_xdp_adjust_tail() API\")\nReviewed-by: Aleksandr Loktionov \u003caleksandr.loktionov@intel.com\u003e\nReviewed-by: Toke Høiland-Jørgensen \u003ctoke@redhat.com\u003e\nAcked-by: Martin KaFai Lau \u003cmartin.lau@kernel.org\u003e\nChange-Id: Idbe8afadad45f42a230cad6d4c7a1f524b20d869\nSigned-off-by: Larysa Zaremba \u003clarysa.zaremba@intel.com\u003e\nLink: https://patch.msgid.link/20260305111253.2317394-10-larysa.zaremba@intel.com\nSigned-off-by: Jakub Kicinski \u003ckuba@kernel.org\u003e\nSigned-off-by: Sasha Levin \u003csashal@kernel.org\u003e\nSigned-off-by: chenglongtang \u003cchenglongtang@google.com\u003e\nReviewed-on: https://cos-review.googlesource.com/c/third_party/kernel/+/143712\nTested-by: Cusky Presubmit Bot \u003cpresubmit@cos-infra-prod.iam.gserviceaccount.com\u003e\nReviewed-by: Kevin Berry \u003ckpberry@google.com\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "1951672411d010ced80de6ebcf97dc2ede7a2c01",
      "old_mode": 33188,
      "old_path": "net/core/filter.c",
      "new_id": "eacbee3c5ec8be1cdfbbc6f730279759b3c2a8f8",
      "new_mode": 33188,
      "new_path": "net/core/filter.c"
    }
  ]
}
