| /* |
| |
| Broadcom B43 wireless driver |
| IEEE 802.11n HT-PHY support |
| |
| Copyright (c) 2011 Rafał Miłecki <zajec5@gmail.com> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; see the file COPYING. If not, write to |
| the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, |
| Boston, MA 02110-1301, USA. |
| |
| */ |
| |
| #include <linux/slab.h> |
| |
| #include "b43.h" |
| #include "phy_ht.h" |
| #include "tables_phy_ht.h" |
| #include "radio_2059.h" |
| #include "main.h" |
| |
| /* Force values to keep compatibility with wl */ |
| enum ht_rssi_type { |
| HT_RSSI_W1 = 0, |
| HT_RSSI_W2 = 1, |
| HT_RSSI_NB = 2, |
| HT_RSSI_IQ = 3, |
| HT_RSSI_TSSI_2G = 4, |
| HT_RSSI_TSSI_5G = 5, |
| HT_RSSI_TBD = 6, |
| }; |
| |
| /************************************************** |
| * Radio 2059. |
| **************************************************/ |
| |
| static void b43_radio_2059_channel_setup(struct b43_wldev *dev, |
| const struct b43_phy_ht_channeltab_e_radio2059 *e) |
| { |
| static const u16 routing[] = { R2059_C1, R2059_C2, R2059_C3, }; |
| u16 r; |
| int core; |
| |
| b43_radio_write(dev, 0x16, e->radio_syn16); |
| b43_radio_write(dev, 0x17, e->radio_syn17); |
| b43_radio_write(dev, 0x22, e->radio_syn22); |
| b43_radio_write(dev, 0x25, e->radio_syn25); |
| b43_radio_write(dev, 0x27, e->radio_syn27); |
| b43_radio_write(dev, 0x28, e->radio_syn28); |
| b43_radio_write(dev, 0x29, e->radio_syn29); |
| b43_radio_write(dev, 0x2c, e->radio_syn2c); |
| b43_radio_write(dev, 0x2d, e->radio_syn2d); |
| b43_radio_write(dev, 0x37, e->radio_syn37); |
| b43_radio_write(dev, 0x41, e->radio_syn41); |
| b43_radio_write(dev, 0x43, e->radio_syn43); |
| b43_radio_write(dev, 0x47, e->radio_syn47); |
| |
| for (core = 0; core < 3; core++) { |
| r = routing[core]; |
| b43_radio_write(dev, r | 0x4a, e->radio_rxtx4a); |
| b43_radio_write(dev, r | 0x58, e->radio_rxtx58); |
| b43_radio_write(dev, r | 0x5a, e->radio_rxtx5a); |
| b43_radio_write(dev, r | 0x6a, e->radio_rxtx6a); |
| b43_radio_write(dev, r | 0x6d, e->radio_rxtx6d); |
| b43_radio_write(dev, r | 0x6e, e->radio_rxtx6e); |
| b43_radio_write(dev, r | 0x92, e->radio_rxtx92); |
| b43_radio_write(dev, r | 0x98, e->radio_rxtx98); |
| } |
| |
| udelay(50); |
| |
| /* Calibration */ |
| b43_radio_mask(dev, R2059_RFPLL_MISC_EN, ~0x1); |
| b43_radio_mask(dev, R2059_RFPLL_MISC_CAL_RESETN, ~0x4); |
| b43_radio_set(dev, R2059_RFPLL_MISC_CAL_RESETN, 0x4); |
| b43_radio_set(dev, R2059_RFPLL_MISC_EN, 0x1); |
| |
| udelay(300); |
| } |
| |
| /* Calibrate resistors in LPF of PLL? */ |
| static void b43_radio_2059_rcal(struct b43_wldev *dev) |
| { |
| /* Enable */ |
| b43_radio_set(dev, R2059_C3 | R2059_RCAL_CONFIG, 0x1); |
| usleep_range(10, 20); |
| |
| b43_radio_set(dev, R2059_C3 | 0x0BF, 0x1); |
| b43_radio_maskset(dev, R2059_C3 | 0x19B, 0x3, 0x2); |
| |
| /* Start */ |
| b43_radio_set(dev, R2059_C3 | R2059_RCAL_CONFIG, 0x2); |
| usleep_range(100, 200); |
| |
| /* Stop */ |
| b43_radio_mask(dev, R2059_C3 | R2059_RCAL_CONFIG, ~0x2); |
| |
| if (!b43_radio_wait_value(dev, R2059_C3 | R2059_RCAL_STATUS, 1, 1, 100, |
| 1000000)) |
| b43err(dev->wl, "Radio 0x2059 rcal timeout\n"); |
| |
| /* Disable */ |
| b43_radio_mask(dev, R2059_C3 | R2059_RCAL_CONFIG, ~0x1); |
| |
| b43_radio_set(dev, 0xa, 0x60); |
| } |
| |
| /* Calibrate the internal RC oscillator? */ |
| static void b43_radio_2057_rccal(struct b43_wldev *dev) |
| { |
| static const u16 radio_values[3][2] = { |
| { 0x61, 0xE9 }, { 0x69, 0xD5 }, { 0x73, 0x99 }, |
| }; |
| int i; |
| |
| for (i = 0; i < 3; i++) { |
| b43_radio_write(dev, R2059_RCCAL_MASTER, radio_values[i][0]); |
| b43_radio_write(dev, R2059_RCCAL_X1, 0x6E); |
| b43_radio_write(dev, R2059_RCCAL_TRC0, radio_values[i][1]); |
| |
| /* Start */ |
| b43_radio_write(dev, R2059_RCCAL_START_R1_Q1_P1, 0x55); |
| |
| /* Wait */ |
| if (!b43_radio_wait_value(dev, R2059_RCCAL_DONE_OSCCAP, 2, 2, |
| 500, 5000000)) |
| b43err(dev->wl, "Radio 0x2059 rccal timeout\n"); |
| |
| /* Stop */ |
| b43_radio_write(dev, R2059_RCCAL_START_R1_Q1_P1, 0x15); |
| } |
| |
| b43_radio_mask(dev, R2059_RCCAL_MASTER, ~0x1); |
| } |
| |
| static void b43_radio_2059_init_pre(struct b43_wldev *dev) |
| { |
| b43_phy_mask(dev, B43_PHY_HT_RF_CTL_CMD, ~B43_PHY_HT_RF_CTL_CMD_CHIP0_PU); |
| b43_phy_set(dev, B43_PHY_HT_RF_CTL_CMD, B43_PHY_HT_RF_CTL_CMD_FORCE); |
| b43_phy_mask(dev, B43_PHY_HT_RF_CTL_CMD, ~B43_PHY_HT_RF_CTL_CMD_FORCE); |
| b43_phy_set(dev, B43_PHY_HT_RF_CTL_CMD, B43_PHY_HT_RF_CTL_CMD_CHIP0_PU); |
| } |
| |
| static void b43_radio_2059_init(struct b43_wldev *dev) |
| { |
| static const u16 routing[] = { R2059_C1, R2059_C2, R2059_C3 }; |
| int i; |
| |
| /* Prepare (reset?) radio */ |
| b43_radio_2059_init_pre(dev); |
| |
| r2059_upload_inittabs(dev); |
| |
| for (i = 0; i < ARRAY_SIZE(routing); i++) |
| b43_radio_set(dev, routing[i] | 0x146, 0x3); |
| |
| /* Post init starts below */ |
| |
| b43_radio_set(dev, R2059_RFPLL_MISC_CAL_RESETN, 0x0078); |
| b43_radio_set(dev, R2059_XTAL_CONFIG2, 0x0080); |
| msleep(2); |
| b43_radio_mask(dev, R2059_RFPLL_MISC_CAL_RESETN, ~0x0078); |
| b43_radio_mask(dev, R2059_XTAL_CONFIG2, ~0x0080); |
| |
| if (1) { /* FIXME */ |
| b43_radio_2059_rcal(dev); |
| b43_radio_2057_rccal(dev); |
| } |
| |
| b43_radio_mask(dev, R2059_RFPLL_MASTER, ~0x0008); |
| } |
| |
| /************************************************** |
| * RF |
| **************************************************/ |
| |
| static void b43_phy_ht_force_rf_sequence(struct b43_wldev *dev, u16 rf_seq) |
| { |
| u8 i; |
| |
| u16 save_seq_mode = b43_phy_read(dev, B43_PHY_HT_RF_SEQ_MODE); |
| b43_phy_set(dev, B43_PHY_HT_RF_SEQ_MODE, 0x3); |
| |
| b43_phy_set(dev, B43_PHY_HT_RF_SEQ_TRIG, rf_seq); |
| for (i = 0; i < 200; i++) { |
| if (!(b43_phy_read(dev, B43_PHY_HT_RF_SEQ_STATUS) & rf_seq)) { |
| i = 0; |
| break; |
| } |
| msleep(1); |
| } |
| if (i) |
| b43err(dev->wl, "Forcing RF sequence timeout\n"); |
| |
| b43_phy_write(dev, B43_PHY_HT_RF_SEQ_MODE, save_seq_mode); |
| } |
| |
| static void b43_phy_ht_pa_override(struct b43_wldev *dev, bool enable) |
| { |
| struct b43_phy_ht *htphy = dev->phy.ht; |
| static const u16 regs[3] = { B43_PHY_HT_RF_CTL_INT_C1, |
| B43_PHY_HT_RF_CTL_INT_C2, |
| B43_PHY_HT_RF_CTL_INT_C3 }; |
| int i; |
| |
| if (enable) { |
| for (i = 0; i < 3; i++) |
| b43_phy_write(dev, regs[i], htphy->rf_ctl_int_save[i]); |
| } else { |
| for (i = 0; i < 3; i++) |
| htphy->rf_ctl_int_save[i] = b43_phy_read(dev, regs[i]); |
| /* TODO: Does 5GHz band use different value (not 0x0400)? */ |
| for (i = 0; i < 3; i++) |
| b43_phy_write(dev, regs[i], 0x0400); |
| } |
| } |
| |
| /************************************************** |
| * Various PHY ops |
| **************************************************/ |
| |
| static u16 b43_phy_ht_classifier(struct b43_wldev *dev, u16 mask, u16 val) |
| { |
| u16 tmp; |
| u16 allowed = B43_PHY_HT_CLASS_CTL_CCK_EN | |
| B43_PHY_HT_CLASS_CTL_OFDM_EN | |
| B43_PHY_HT_CLASS_CTL_WAITED_EN; |
| |
| tmp = b43_phy_read(dev, B43_PHY_HT_CLASS_CTL); |
| tmp &= allowed; |
| tmp &= ~mask; |
| tmp |= (val & mask); |
| b43_phy_maskset(dev, B43_PHY_HT_CLASS_CTL, ~allowed, tmp); |
| |
| return tmp; |
| } |
| |
| static void b43_phy_ht_reset_cca(struct b43_wldev *dev) |
| { |
| u16 bbcfg; |
| |
| b43_phy_force_clock(dev, true); |
| bbcfg = b43_phy_read(dev, B43_PHY_HT_BBCFG); |
| b43_phy_write(dev, B43_PHY_HT_BBCFG, bbcfg | B43_PHY_HT_BBCFG_RSTCCA); |
| udelay(1); |
| b43_phy_write(dev, B43_PHY_HT_BBCFG, bbcfg & ~B43_PHY_HT_BBCFG_RSTCCA); |
| b43_phy_force_clock(dev, false); |
| |
| b43_phy_ht_force_rf_sequence(dev, B43_PHY_HT_RF_SEQ_TRIG_RST2RX); |
| } |
| |
| static void b43_phy_ht_zero_extg(struct b43_wldev *dev) |
| { |
| u8 i, j; |
| static const u16 base[] = { 0x40, 0x60, 0x80 }; |
| |
| for (i = 0; i < ARRAY_SIZE(base); i++) { |
| for (j = 0; j < 4; j++) |
| b43_phy_write(dev, B43_PHY_EXTG(base[i] + j), 0); |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(base); i++) |
| b43_phy_write(dev, B43_PHY_EXTG(base[i] + 0xc), 0); |
| } |
| |
| /* Some unknown AFE (Analog Frondned) op */ |
| static void b43_phy_ht_afe_unk1(struct b43_wldev *dev) |
| { |
| u8 i; |
| |
| static const u16 ctl_regs[3][2] = { |
| { B43_PHY_HT_AFE_C1_OVER, B43_PHY_HT_AFE_C1 }, |
| { B43_PHY_HT_AFE_C2_OVER, B43_PHY_HT_AFE_C2 }, |
| { B43_PHY_HT_AFE_C3_OVER, B43_PHY_HT_AFE_C3}, |
| }; |
| |
| for (i = 0; i < 3; i++) { |
| /* TODO: verify masks&sets */ |
| b43_phy_set(dev, ctl_regs[i][1], 0x4); |
| b43_phy_set(dev, ctl_regs[i][0], 0x4); |
| b43_phy_mask(dev, ctl_regs[i][1], ~0x1); |
| b43_phy_set(dev, ctl_regs[i][0], 0x1); |
| b43_httab_write(dev, B43_HTTAB16(8, 5 + (i * 0x10)), 0); |
| b43_phy_mask(dev, ctl_regs[i][0], ~0x4); |
| } |
| } |
| |
| static void b43_phy_ht_read_clip_detection(struct b43_wldev *dev, u16 *clip_st) |
| { |
| clip_st[0] = b43_phy_read(dev, B43_PHY_HT_C1_CLIP1THRES); |
| clip_st[1] = b43_phy_read(dev, B43_PHY_HT_C2_CLIP1THRES); |
| clip_st[2] = b43_phy_read(dev, B43_PHY_HT_C3_CLIP1THRES); |
| } |
| |
| static void b43_phy_ht_bphy_init(struct b43_wldev *dev) |
| { |
| unsigned int i; |
| u16 val; |
| |
| val = 0x1E1F; |
| for (i = 0; i < 16; i++) { |
| b43_phy_write(dev, B43_PHY_N_BMODE(0x88 + i), val); |
| val -= 0x202; |
| } |
| val = 0x3E3F; |
| for (i = 0; i < 16; i++) { |
| b43_phy_write(dev, B43_PHY_N_BMODE(0x98 + i), val); |
| val -= 0x202; |
| } |
| b43_phy_write(dev, B43_PHY_N_BMODE(0x38), 0x668); |
| } |
| |
| static void b43_phy_ht_bphy_reset(struct b43_wldev *dev, bool reset) |
| { |
| u16 tmp; |
| |
| tmp = b43_read16(dev, B43_MMIO_PSM_PHY_HDR); |
| b43_write16(dev, B43_MMIO_PSM_PHY_HDR, |
| tmp | B43_PSM_HDR_MAC_PHY_FORCE_CLK); |
| |
| /* Put BPHY in or take it out of the reset */ |
| if (reset) |
| b43_phy_set(dev, B43_PHY_B_BBCFG, |
| B43_PHY_B_BBCFG_RSTCCA | B43_PHY_B_BBCFG_RSTRX); |
| else |
| b43_phy_mask(dev, B43_PHY_B_BBCFG, |
| (u16)~(B43_PHY_B_BBCFG_RSTCCA | |
| B43_PHY_B_BBCFG_RSTRX)); |
| |
| b43_write16(dev, B43_MMIO_PSM_PHY_HDR, tmp); |
| } |
| |
| /************************************************** |
| * Samples |
| **************************************************/ |
| |
| static void b43_phy_ht_stop_playback(struct b43_wldev *dev) |
| { |
| struct b43_phy_ht *phy_ht = dev->phy.ht; |
| u16 tmp; |
| int i; |
| |
| tmp = b43_phy_read(dev, B43_PHY_HT_SAMP_STAT); |
| if (tmp & 0x1) |
| b43_phy_set(dev, B43_PHY_HT_SAMP_CMD, B43_PHY_HT_SAMP_CMD_STOP); |
| else if (tmp & 0x2) |
| b43_phy_mask(dev, B43_PHY_HT_IQLOCAL_CMDGCTL, 0x7FFF); |
| |
| b43_phy_mask(dev, B43_PHY_HT_SAMP_CMD, ~0x0004); |
| |
| for (i = 0; i < 3; i++) { |
| if (phy_ht->bb_mult_save[i] >= 0) { |
| b43_httab_write(dev, B43_HTTAB16(13, 0x63 + i * 4), |
| phy_ht->bb_mult_save[i]); |
| b43_httab_write(dev, B43_HTTAB16(13, 0x67 + i * 4), |
| phy_ht->bb_mult_save[i]); |
| } |
| } |
| } |
| |
| static u16 b43_phy_ht_load_samples(struct b43_wldev *dev) |
| { |
| int i; |
| u16 len = 20 << 3; |
| |
| b43_phy_write(dev, B43_PHY_HT_TABLE_ADDR, 0x4400); |
| |
| for (i = 0; i < len; i++) { |
| b43_phy_write(dev, B43_PHY_HT_TABLE_DATAHI, 0); |
| b43_phy_write(dev, B43_PHY_HT_TABLE_DATALO, 0); |
| } |
| |
| return len; |
| } |
| |
| static void b43_phy_ht_run_samples(struct b43_wldev *dev, u16 samps, u16 loops, |
| u16 wait) |
| { |
| struct b43_phy_ht *phy_ht = dev->phy.ht; |
| u16 save_seq_mode; |
| int i; |
| |
| for (i = 0; i < 3; i++) { |
| if (phy_ht->bb_mult_save[i] < 0) |
| phy_ht->bb_mult_save[i] = b43_httab_read(dev, B43_HTTAB16(13, 0x63 + i * 4)); |
| } |
| |
| b43_phy_write(dev, B43_PHY_HT_SAMP_DEP_CNT, samps - 1); |
| if (loops != 0xFFFF) |
| loops--; |
| b43_phy_write(dev, B43_PHY_HT_SAMP_LOOP_CNT, loops); |
| b43_phy_write(dev, B43_PHY_HT_SAMP_WAIT_CNT, wait); |
| |
| save_seq_mode = b43_phy_read(dev, B43_PHY_HT_RF_SEQ_MODE); |
| b43_phy_set(dev, B43_PHY_HT_RF_SEQ_MODE, |
| B43_PHY_HT_RF_SEQ_MODE_CA_OVER); |
| |
| /* TODO: find out mask bits! Do we need more function arguments? */ |
| b43_phy_mask(dev, B43_PHY_HT_SAMP_CMD, ~0); |
| b43_phy_mask(dev, B43_PHY_HT_SAMP_CMD, ~0); |
| b43_phy_mask(dev, B43_PHY_HT_IQLOCAL_CMDGCTL, ~0); |
| b43_phy_set(dev, B43_PHY_HT_SAMP_CMD, 0x1); |
| |
| for (i = 0; i < 100; i++) { |
| if (!(b43_phy_read(dev, B43_PHY_HT_RF_SEQ_STATUS) & 1)) { |
| i = 0; |
| break; |
| } |
| udelay(10); |
| } |
| if (i) |
| b43err(dev->wl, "run samples timeout\n"); |
| |
| b43_phy_write(dev, B43_PHY_HT_RF_SEQ_MODE, save_seq_mode); |
| } |
| |
| static void b43_phy_ht_tx_tone(struct b43_wldev *dev) |
| { |
| u16 samp; |
| |
| samp = b43_phy_ht_load_samples(dev); |
| b43_phy_ht_run_samples(dev, samp, 0xFFFF, 0); |
| } |
| |
| /************************************************** |
| * RSSI |
| **************************************************/ |
| |
| static void b43_phy_ht_rssi_select(struct b43_wldev *dev, u8 core_sel, |
| enum ht_rssi_type rssi_type) |
| { |
| static const u16 ctl_regs[3][2] = { |
| { B43_PHY_HT_AFE_C1, B43_PHY_HT_AFE_C1_OVER, }, |
| { B43_PHY_HT_AFE_C2, B43_PHY_HT_AFE_C2_OVER, }, |
| { B43_PHY_HT_AFE_C3, B43_PHY_HT_AFE_C3_OVER, }, |
| }; |
| static const u16 radio_r[] = { R2059_C1, R2059_C2, R2059_C3, }; |
| int core; |
| |
| if (core_sel == 0) { |
| b43err(dev->wl, "RSSI selection for core off not implemented yet\n"); |
| } else { |
| for (core = 0; core < 3; core++) { |
| /* Check if caller requested a one specific core */ |
| if ((core_sel == 1 && core != 0) || |
| (core_sel == 2 && core != 1) || |
| (core_sel == 3 && core != 2)) |
| continue; |
| |
| switch (rssi_type) { |
| case HT_RSSI_TSSI_2G: |
| b43_phy_set(dev, ctl_regs[core][0], 0x3 << 8); |
| b43_phy_set(dev, ctl_regs[core][0], 0x3 << 10); |
| b43_phy_set(dev, ctl_regs[core][1], 0x1 << 9); |
| b43_phy_set(dev, ctl_regs[core][1], 0x1 << 10); |
| |
| b43_radio_set(dev, R2059_C3 | 0xbf, 0x1); |
| b43_radio_write(dev, radio_r[core] | 0x159, |
| 0x11); |
| break; |
| default: |
| b43err(dev->wl, "RSSI selection for type %d not implemented yet\n", |
| rssi_type); |
| } |
| } |
| } |
| } |
| |
| static void b43_phy_ht_poll_rssi(struct b43_wldev *dev, enum ht_rssi_type type, |
| s32 *buf, u8 nsamp) |
| { |
| u16 phy_regs_values[12]; |
| static const u16 phy_regs_to_save[] = { |
| B43_PHY_HT_AFE_C1, B43_PHY_HT_AFE_C1_OVER, |
| 0x848, 0x841, |
| B43_PHY_HT_AFE_C2, B43_PHY_HT_AFE_C2_OVER, |
| 0x868, 0x861, |
| B43_PHY_HT_AFE_C3, B43_PHY_HT_AFE_C3_OVER, |
| 0x888, 0x881, |
| }; |
| u16 tmp[3]; |
| int i; |
| |
| for (i = 0; i < 12; i++) |
| phy_regs_values[i] = b43_phy_read(dev, phy_regs_to_save[i]); |
| |
| b43_phy_ht_rssi_select(dev, 5, type); |
| |
| for (i = 0; i < 6; i++) |
| buf[i] = 0; |
| |
| for (i = 0; i < nsamp; i++) { |
| tmp[0] = b43_phy_read(dev, B43_PHY_HT_RSSI_C1); |
| tmp[1] = b43_phy_read(dev, B43_PHY_HT_RSSI_C2); |
| tmp[2] = b43_phy_read(dev, B43_PHY_HT_RSSI_C3); |
| |
| buf[0] += ((s8)((tmp[0] & 0x3F) << 2)) >> 2; |
| buf[1] += ((s8)(((tmp[0] >> 8) & 0x3F) << 2)) >> 2; |
| buf[2] += ((s8)((tmp[1] & 0x3F) << 2)) >> 2; |
| buf[3] += ((s8)(((tmp[1] >> 8) & 0x3F) << 2)) >> 2; |
| buf[4] += ((s8)((tmp[2] & 0x3F) << 2)) >> 2; |
| buf[5] += ((s8)(((tmp[2] >> 8) & 0x3F) << 2)) >> 2; |
| } |
| |
| for (i = 0; i < 12; i++) |
| b43_phy_write(dev, phy_regs_to_save[i], phy_regs_values[i]); |
| } |
| |
| /************************************************** |
| * Tx/Rx |
| **************************************************/ |
| |
| static void b43_phy_ht_tx_power_fix(struct b43_wldev *dev) |
| { |
| int i; |
| |
| for (i = 0; i < 3; i++) { |
| u16 mask; |
| u32 tmp = b43_httab_read(dev, B43_HTTAB32(26, 0xE8)); |
| |
| if (0) /* FIXME */ |
| mask = 0x2 << (i * 4); |
| else |
| mask = 0; |
| b43_phy_mask(dev, B43_PHY_EXTG(0x108), mask); |
| |
| b43_httab_write(dev, B43_HTTAB16(7, 0x110 + i), tmp >> 16); |
| b43_httab_write(dev, B43_HTTAB8(13, 0x63 + (i * 4)), |
| tmp & 0xFF); |
| b43_httab_write(dev, B43_HTTAB8(13, 0x73 + (i * 4)), |
| tmp & 0xFF); |
| } |
| } |
| |
| static void b43_phy_ht_tx_power_ctl(struct b43_wldev *dev, bool enable) |
| { |
| struct b43_phy_ht *phy_ht = dev->phy.ht; |
| u16 en_bits = B43_PHY_HT_TXPCTL_CMD_C1_COEFF | |
| B43_PHY_HT_TXPCTL_CMD_C1_HWPCTLEN | |
| B43_PHY_HT_TXPCTL_CMD_C1_PCTLEN; |
| static const u16 cmd_regs[3] = { B43_PHY_HT_TXPCTL_CMD_C1, |
| B43_PHY_HT_TXPCTL_CMD_C2, |
| B43_PHY_HT_TXPCTL_CMD_C3 }; |
| static const u16 status_regs[3] = { B43_PHY_HT_TX_PCTL_STATUS_C1, |
| B43_PHY_HT_TX_PCTL_STATUS_C2, |
| B43_PHY_HT_TX_PCTL_STATUS_C3 }; |
| int i; |
| |
| if (!enable) { |
| if (b43_phy_read(dev, B43_PHY_HT_TXPCTL_CMD_C1) & en_bits) { |
| /* We disable enabled TX pwr ctl, save it's state */ |
| for (i = 0; i < 3; i++) |
| phy_ht->tx_pwr_idx[i] = |
| b43_phy_read(dev, status_regs[i]); |
| } |
| b43_phy_mask(dev, B43_PHY_HT_TXPCTL_CMD_C1, ~en_bits); |
| } else { |
| b43_phy_set(dev, B43_PHY_HT_TXPCTL_CMD_C1, en_bits); |
| |
| if (b43_current_band(dev->wl) == NL80211_BAND_5GHZ) { |
| for (i = 0; i < 3; i++) |
| b43_phy_write(dev, cmd_regs[i], 0x32); |
| } |
| |
| for (i = 0; i < 3; i++) |
| if (phy_ht->tx_pwr_idx[i] <= |
| B43_PHY_HT_TXPCTL_CMD_C1_INIT) |
| b43_phy_write(dev, cmd_regs[i], |
| phy_ht->tx_pwr_idx[i]); |
| } |
| |
| phy_ht->tx_pwr_ctl = enable; |
| } |
| |
| static void b43_phy_ht_tx_power_ctl_idle_tssi(struct b43_wldev *dev) |
| { |
| struct b43_phy_ht *phy_ht = dev->phy.ht; |
| static const u16 base[] = { 0x840, 0x860, 0x880 }; |
| u16 save_regs[3][3]; |
| s32 rssi_buf[6]; |
| int core; |
| |
| for (core = 0; core < 3; core++) { |
| save_regs[core][1] = b43_phy_read(dev, base[core] + 6); |
| save_regs[core][2] = b43_phy_read(dev, base[core] + 7); |
| save_regs[core][0] = b43_phy_read(dev, base[core] + 0); |
| |
| b43_phy_write(dev, base[core] + 6, 0); |
| b43_phy_mask(dev, base[core] + 7, ~0xF); /* 0xF? Or just 0x6? */ |
| b43_phy_set(dev, base[core] + 0, 0x0400); |
| b43_phy_set(dev, base[core] + 0, 0x1000); |
| } |
| |
| b43_phy_ht_tx_tone(dev); |
| udelay(20); |
| b43_phy_ht_poll_rssi(dev, HT_RSSI_TSSI_2G, rssi_buf, 1); |
| b43_phy_ht_stop_playback(dev); |
| b43_phy_ht_reset_cca(dev); |
| |
| phy_ht->idle_tssi[0] = rssi_buf[0] & 0xff; |
| phy_ht->idle_tssi[1] = rssi_buf[2] & 0xff; |
| phy_ht->idle_tssi[2] = rssi_buf[4] & 0xff; |
| |
| for (core = 0; core < 3; core++) { |
| b43_phy_write(dev, base[core] + 0, save_regs[core][0]); |
| b43_phy_write(dev, base[core] + 6, save_regs[core][1]); |
| b43_phy_write(dev, base[core] + 7, save_regs[core][2]); |
| } |
| } |
| |
| static void b43_phy_ht_tssi_setup(struct b43_wldev *dev) |
| { |
| static const u16 routing[] = { R2059_C1, R2059_C2, R2059_C3, }; |
| int core; |
| |
| /* 0x159 is probably TX_SSI_MUX or TSSIG (by comparing to N-PHY) */ |
| for (core = 0; core < 3; core++) { |
| b43_radio_set(dev, 0x8bf, 0x1); |
| b43_radio_write(dev, routing[core] | 0x0159, 0x0011); |
| } |
| } |
| |
| static void b43_phy_ht_tx_power_ctl_setup(struct b43_wldev *dev) |
| { |
| struct b43_phy_ht *phy_ht = dev->phy.ht; |
| struct ssb_sprom *sprom = dev->dev->bus_sprom; |
| |
| u8 *idle = phy_ht->idle_tssi; |
| u8 target[3]; |
| s16 a1[3], b0[3], b1[3]; |
| |
| u16 freq = dev->phy.chandef->chan->center_freq; |
| int i, c; |
| |
| if (b43_current_band(dev->wl) == NL80211_BAND_2GHZ) { |
| for (c = 0; c < 3; c++) { |
| target[c] = sprom->core_pwr_info[c].maxpwr_2g; |
| a1[c] = sprom->core_pwr_info[c].pa_2g[0]; |
| b0[c] = sprom->core_pwr_info[c].pa_2g[1]; |
| b1[c] = sprom->core_pwr_info[c].pa_2g[2]; |
| } |
| } else if (freq >= 4900 && freq < 5100) { |
| for (c = 0; c < 3; c++) { |
| target[c] = sprom->core_pwr_info[c].maxpwr_5gl; |
| a1[c] = sprom->core_pwr_info[c].pa_5gl[0]; |
| b0[c] = sprom->core_pwr_info[c].pa_5gl[1]; |
| b1[c] = sprom->core_pwr_info[c].pa_5gl[2]; |
| } |
| } else if (freq >= 5100 && freq < 5500) { |
| for (c = 0; c < 3; c++) { |
| target[c] = sprom->core_pwr_info[c].maxpwr_5g; |
| a1[c] = sprom->core_pwr_info[c].pa_5g[0]; |
| b0[c] = sprom->core_pwr_info[c].pa_5g[1]; |
| b1[c] = sprom->core_pwr_info[c].pa_5g[2]; |
| } |
| } else if (freq >= 5500) { |
| for (c = 0; c < 3; c++) { |
| target[c] = sprom->core_pwr_info[c].maxpwr_5gh; |
| a1[c] = sprom->core_pwr_info[c].pa_5gh[0]; |
| b0[c] = sprom->core_pwr_info[c].pa_5gh[1]; |
| b1[c] = sprom->core_pwr_info[c].pa_5gh[2]; |
| } |
| } else { |
| target[0] = target[1] = target[2] = 52; |
| a1[0] = a1[1] = a1[2] = -424; |
| b0[0] = b0[1] = b0[2] = 5612; |
| b1[0] = b1[1] = b1[2] = -1393; |
| } |
| |
| b43_phy_set(dev, B43_PHY_HT_TSSIMODE, B43_PHY_HT_TSSIMODE_EN); |
| b43_phy_mask(dev, B43_PHY_HT_TXPCTL_CMD_C1, |
| ~B43_PHY_HT_TXPCTL_CMD_C1_PCTLEN & 0xFFFF); |
| |
| /* TODO: Does it depend on sprom->fem.ghz2.tssipos? */ |
| b43_phy_set(dev, B43_PHY_HT_TXPCTL_IDLE_TSSI, 0x4000); |
| |
| b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_CMD_C1, |
| ~B43_PHY_HT_TXPCTL_CMD_C1_INIT, 0x19); |
| b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_CMD_C2, |
| ~B43_PHY_HT_TXPCTL_CMD_C2_INIT, 0x19); |
| b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_CMD_C3, |
| ~B43_PHY_HT_TXPCTL_CMD_C3_INIT, 0x19); |
| |
| b43_phy_set(dev, B43_PHY_HT_TXPCTL_IDLE_TSSI, |
| B43_PHY_HT_TXPCTL_IDLE_TSSI_BINF); |
| |
| b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_IDLE_TSSI, |
| ~B43_PHY_HT_TXPCTL_IDLE_TSSI_C1, |
| idle[0] << B43_PHY_HT_TXPCTL_IDLE_TSSI_C1_SHIFT); |
| b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_IDLE_TSSI, |
| ~B43_PHY_HT_TXPCTL_IDLE_TSSI_C2, |
| idle[1] << B43_PHY_HT_TXPCTL_IDLE_TSSI_C2_SHIFT); |
| b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_IDLE_TSSI2, |
| ~B43_PHY_HT_TXPCTL_IDLE_TSSI2_C3, |
| idle[2] << B43_PHY_HT_TXPCTL_IDLE_TSSI2_C3_SHIFT); |
| |
| b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_N, ~B43_PHY_HT_TXPCTL_N_TSSID, |
| 0xf0); |
| b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_N, ~B43_PHY_HT_TXPCTL_N_NPTIL2, |
| 0x3 << B43_PHY_HT_TXPCTL_N_NPTIL2_SHIFT); |
| #if 0 |
| /* TODO: what to mask/set? */ |
| b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_CMD_C1, 0x800, 0) |
| b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_CMD_C1, 0x400, 0) |
| #endif |
| |
| b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_TARG_PWR, |
| ~B43_PHY_HT_TXPCTL_TARG_PWR_C1, |
| target[0] << B43_PHY_HT_TXPCTL_TARG_PWR_C1_SHIFT); |
| b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_TARG_PWR, |
| ~B43_PHY_HT_TXPCTL_TARG_PWR_C2 & 0xFFFF, |
| target[1] << B43_PHY_HT_TXPCTL_TARG_PWR_C2_SHIFT); |
| b43_phy_maskset(dev, B43_PHY_HT_TXPCTL_TARG_PWR2, |
| ~B43_PHY_HT_TXPCTL_TARG_PWR2_C3, |
| target[2] << B43_PHY_HT_TXPCTL_TARG_PWR2_C3_SHIFT); |
| |
| for (c = 0; c < 3; c++) { |
| s32 num, den, pwr; |
| u32 regval[64]; |
| |
| for (i = 0; i < 64; i++) { |
| num = 8 * (16 * b0[c] + b1[c] * i); |
| den = 32768 + a1[c] * i; |
| pwr = max((4 * num + den / 2) / den, -8); |
| regval[i] = pwr; |
| } |
| b43_httab_write_bulk(dev, B43_HTTAB16(26 + c, 0), 64, regval); |
| } |
| } |
| |
| /************************************************** |
| * Channel switching ops. |
| **************************************************/ |
| |
| static void b43_phy_ht_spur_avoid(struct b43_wldev *dev, |
| struct ieee80211_channel *new_channel) |
| { |
| struct bcma_device *core = dev->dev->bdev; |
| int spuravoid = 0; |
| |
| /* Check for 13 and 14 is just a guess, we don't have enough logs. */ |
| if (new_channel->hw_value == 13 || new_channel->hw_value == 14) |
| spuravoid = 1; |
| bcma_core_pll_ctl(core, B43_BCMA_CLKCTLST_PHY_PLL_REQ, 0, false); |
| bcma_pmu_spuravoid_pllupdate(&core->bus->drv_cc, spuravoid); |
| bcma_core_pll_ctl(core, |
| B43_BCMA_CLKCTLST_80211_PLL_REQ | |
| B43_BCMA_CLKCTLST_PHY_PLL_REQ, |
| B43_BCMA_CLKCTLST_80211_PLL_ST | |
| B43_BCMA_CLKCTLST_PHY_PLL_ST, false); |
| |
| b43_mac_switch_freq(dev, spuravoid); |
| |
| b43_wireless_core_phy_pll_reset(dev); |
| |
| if (spuravoid) |
| b43_phy_set(dev, B43_PHY_HT_BBCFG, B43_PHY_HT_BBCFG_RSTRX); |
| else |
| b43_phy_mask(dev, B43_PHY_HT_BBCFG, |
| ~B43_PHY_HT_BBCFG_RSTRX & 0xFFFF); |
| |
| b43_phy_ht_reset_cca(dev); |
| } |
| |
| static void b43_phy_ht_channel_setup(struct b43_wldev *dev, |
| const struct b43_phy_ht_channeltab_e_phy *e, |
| struct ieee80211_channel *new_channel) |
| { |
| if (new_channel->band == NL80211_BAND_5GHZ) { |
| /* Switch to 2 GHz for a moment to access B-PHY regs */ |
| b43_phy_mask(dev, B43_PHY_HT_BANDCTL, ~B43_PHY_HT_BANDCTL_5GHZ); |
| |
| b43_phy_ht_bphy_reset(dev, true); |
| |
| /* Switch to 5 GHz */ |
| b43_phy_set(dev, B43_PHY_HT_BANDCTL, B43_PHY_HT_BANDCTL_5GHZ); |
| } else { |
| /* Switch to 2 GHz */ |
| b43_phy_mask(dev, B43_PHY_HT_BANDCTL, ~B43_PHY_HT_BANDCTL_5GHZ); |
| |
| b43_phy_ht_bphy_reset(dev, false); |
| } |
| |
| b43_phy_write(dev, B43_PHY_HT_BW1, e->bw1); |
| b43_phy_write(dev, B43_PHY_HT_BW2, e->bw2); |
| b43_phy_write(dev, B43_PHY_HT_BW3, e->bw3); |
| b43_phy_write(dev, B43_PHY_HT_BW4, e->bw4); |
| b43_phy_write(dev, B43_PHY_HT_BW5, e->bw5); |
| b43_phy_write(dev, B43_PHY_HT_BW6, e->bw6); |
| |
| if (new_channel->hw_value == 14) { |
| b43_phy_ht_classifier(dev, B43_PHY_HT_CLASS_CTL_OFDM_EN, 0); |
| b43_phy_set(dev, B43_PHY_HT_TEST, 0x0800); |
| } else { |
| b43_phy_ht_classifier(dev, B43_PHY_HT_CLASS_CTL_OFDM_EN, |
| B43_PHY_HT_CLASS_CTL_OFDM_EN); |
| if (new_channel->band == NL80211_BAND_2GHZ) |
| b43_phy_mask(dev, B43_PHY_HT_TEST, ~0x840); |
| } |
| |
| if (1) /* TODO: On N it's for early devices only, what about HT? */ |
| b43_phy_ht_tx_power_fix(dev); |
| |
| b43_phy_ht_spur_avoid(dev, new_channel); |
| |
| b43_phy_write(dev, 0x017e, 0x3830); |
| } |
| |
| static int b43_phy_ht_set_channel(struct b43_wldev *dev, |
| struct ieee80211_channel *channel, |
| enum nl80211_channel_type channel_type) |
| { |
| struct b43_phy *phy = &dev->phy; |
| |
| const struct b43_phy_ht_channeltab_e_radio2059 *chent_r2059 = NULL; |
| |
| if (phy->radio_ver == 0x2059) { |
| chent_r2059 = b43_phy_ht_get_channeltab_e_r2059(dev, |
| channel->center_freq); |
| if (!chent_r2059) |
| return -ESRCH; |
| } else { |
| return -ESRCH; |
| } |
| |
| /* TODO: In case of N-PHY some bandwidth switching goes here */ |
| |
| if (phy->radio_ver == 0x2059) { |
| b43_radio_2059_channel_setup(dev, chent_r2059); |
| b43_phy_ht_channel_setup(dev, &(chent_r2059->phy_regs), |
| channel); |
| } else { |
| return -ESRCH; |
| } |
| |
| return 0; |
| } |
| |
| /************************************************** |
| * Basic PHY ops. |
| **************************************************/ |
| |
| static int b43_phy_ht_op_allocate(struct b43_wldev *dev) |
| { |
| struct b43_phy_ht *phy_ht; |
| |
| phy_ht = kzalloc(sizeof(*phy_ht), GFP_KERNEL); |
| if (!phy_ht) |
| return -ENOMEM; |
| dev->phy.ht = phy_ht; |
| |
| return 0; |
| } |
| |
| static void b43_phy_ht_op_prepare_structs(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_ht *phy_ht = phy->ht; |
| int i; |
| |
| memset(phy_ht, 0, sizeof(*phy_ht)); |
| |
| phy_ht->tx_pwr_ctl = true; |
| for (i = 0; i < 3; i++) |
| phy_ht->tx_pwr_idx[i] = B43_PHY_HT_TXPCTL_CMD_C1_INIT + 1; |
| |
| for (i = 0; i < 3; i++) |
| phy_ht->bb_mult_save[i] = -1; |
| } |
| |
| static int b43_phy_ht_op_init(struct b43_wldev *dev) |
| { |
| struct b43_phy_ht *phy_ht = dev->phy.ht; |
| u16 tmp; |
| u16 clip_state[3]; |
| bool saved_tx_pwr_ctl; |
| |
| if (dev->dev->bus_type != B43_BUS_BCMA) { |
| b43err(dev->wl, "HT-PHY is supported only on BCMA bus!\n"); |
| return -EOPNOTSUPP; |
| } |
| |
| b43_phy_ht_tables_init(dev); |
| |
| b43_phy_mask(dev, 0x0be, ~0x2); |
| b43_phy_set(dev, 0x23f, 0x7ff); |
| b43_phy_set(dev, 0x240, 0x7ff); |
| b43_phy_set(dev, 0x241, 0x7ff); |
| |
| b43_phy_ht_zero_extg(dev); |
| |
| b43_phy_mask(dev, B43_PHY_EXTG(0), ~0x3); |
| |
| b43_phy_write(dev, B43_PHY_HT_AFE_C1_OVER, 0); |
| b43_phy_write(dev, B43_PHY_HT_AFE_C2_OVER, 0); |
| b43_phy_write(dev, B43_PHY_HT_AFE_C3_OVER, 0); |
| |
| b43_phy_write(dev, B43_PHY_EXTG(0x103), 0x20); |
| b43_phy_write(dev, B43_PHY_EXTG(0x101), 0x20); |
| b43_phy_write(dev, 0x20d, 0xb8); |
| b43_phy_write(dev, B43_PHY_EXTG(0x14f), 0xc8); |
| b43_phy_write(dev, 0x70, 0x50); |
| b43_phy_write(dev, 0x1ff, 0x30); |
| |
| if (0) /* TODO: condition */ |
| ; /* TODO: PHY op on reg 0x217 */ |
| |
| if (b43_current_band(dev->wl) == NL80211_BAND_5GHZ) |
| b43_phy_ht_classifier(dev, B43_PHY_HT_CLASS_CTL_CCK_EN, 0); |
| else |
| b43_phy_ht_classifier(dev, B43_PHY_HT_CLASS_CTL_CCK_EN, |
| B43_PHY_HT_CLASS_CTL_CCK_EN); |
| |
| b43_phy_set(dev, 0xb1, 0x91); |
| b43_phy_write(dev, 0x32f, 0x0003); |
| b43_phy_write(dev, 0x077, 0x0010); |
| b43_phy_write(dev, 0x0b4, 0x0258); |
| b43_phy_mask(dev, 0x17e, ~0x4000); |
| |
| b43_phy_write(dev, 0x0b9, 0x0072); |
| |
| b43_httab_write_few(dev, B43_HTTAB16(7, 0x14e), 2, 0x010f, 0x010f); |
| b43_httab_write_few(dev, B43_HTTAB16(7, 0x15e), 2, 0x010f, 0x010f); |
| b43_httab_write_few(dev, B43_HTTAB16(7, 0x16e), 2, 0x010f, 0x010f); |
| |
| b43_phy_ht_afe_unk1(dev); |
| |
| b43_httab_write_few(dev, B43_HTTAB16(7, 0x130), 9, 0x777, 0x111, 0x111, |
| 0x777, 0x111, 0x111, 0x777, 0x111, 0x111); |
| |
| b43_httab_write(dev, B43_HTTAB16(7, 0x120), 0x0777); |
| b43_httab_write(dev, B43_HTTAB16(7, 0x124), 0x0777); |
| |
| b43_httab_write(dev, B43_HTTAB16(8, 0x00), 0x02); |
| b43_httab_write(dev, B43_HTTAB16(8, 0x10), 0x02); |
| b43_httab_write(dev, B43_HTTAB16(8, 0x20), 0x02); |
| |
| b43_httab_write_few(dev, B43_HTTAB16(8, 0x08), 4, |
| 0x8e, 0x96, 0x96, 0x96); |
| b43_httab_write_few(dev, B43_HTTAB16(8, 0x18), 4, |
| 0x8f, 0x9f, 0x9f, 0x9f); |
| b43_httab_write_few(dev, B43_HTTAB16(8, 0x28), 4, |
| 0x8f, 0x9f, 0x9f, 0x9f); |
| |
| b43_httab_write_few(dev, B43_HTTAB16(8, 0x0c), 4, 0x2, 0x2, 0x2, 0x2); |
| b43_httab_write_few(dev, B43_HTTAB16(8, 0x1c), 4, 0x2, 0x2, 0x2, 0x2); |
| b43_httab_write_few(dev, B43_HTTAB16(8, 0x2c), 4, 0x2, 0x2, 0x2, 0x2); |
| |
| b43_phy_maskset(dev, 0x0280, 0xff00, 0x3e); |
| b43_phy_maskset(dev, 0x0283, 0xff00, 0x3e); |
| b43_phy_maskset(dev, B43_PHY_OFDM(0x0141), 0xff00, 0x46); |
| b43_phy_maskset(dev, 0x0283, 0xff00, 0x40); |
| |
| b43_httab_write_few(dev, B43_HTTAB16(00, 0x8), 4, |
| 0x09, 0x0e, 0x13, 0x18); |
| b43_httab_write_few(dev, B43_HTTAB16(01, 0x8), 4, |
| 0x09, 0x0e, 0x13, 0x18); |
| /* TODO: Did wl mean 2 instead of 40? */ |
| b43_httab_write_few(dev, B43_HTTAB16(40, 0x8), 4, |
| 0x09, 0x0e, 0x13, 0x18); |
| |
| b43_phy_maskset(dev, B43_PHY_OFDM(0x24), 0x3f, 0xd); |
| b43_phy_maskset(dev, B43_PHY_OFDM(0x64), 0x3f, 0xd); |
| b43_phy_maskset(dev, B43_PHY_OFDM(0xa4), 0x3f, 0xd); |
| |
| b43_phy_set(dev, B43_PHY_EXTG(0x060), 0x1); |
| b43_phy_set(dev, B43_PHY_EXTG(0x064), 0x1); |
| b43_phy_set(dev, B43_PHY_EXTG(0x080), 0x1); |
| b43_phy_set(dev, B43_PHY_EXTG(0x084), 0x1); |
| |
| /* Copy some tables entries */ |
| tmp = b43_httab_read(dev, B43_HTTAB16(7, 0x144)); |
| b43_httab_write(dev, B43_HTTAB16(7, 0x14a), tmp); |
| tmp = b43_httab_read(dev, B43_HTTAB16(7, 0x154)); |
| b43_httab_write(dev, B43_HTTAB16(7, 0x15a), tmp); |
| tmp = b43_httab_read(dev, B43_HTTAB16(7, 0x164)); |
| b43_httab_write(dev, B43_HTTAB16(7, 0x16a), tmp); |
| |
| /* Reset CCA */ |
| b43_phy_force_clock(dev, true); |
| tmp = b43_phy_read(dev, B43_PHY_HT_BBCFG); |
| b43_phy_write(dev, B43_PHY_HT_BBCFG, tmp | B43_PHY_HT_BBCFG_RSTCCA); |
| b43_phy_write(dev, B43_PHY_HT_BBCFG, tmp & ~B43_PHY_HT_BBCFG_RSTCCA); |
| b43_phy_force_clock(dev, false); |
| |
| b43_mac_phy_clock_set(dev, true); |
| |
| b43_phy_ht_pa_override(dev, false); |
| b43_phy_ht_force_rf_sequence(dev, B43_PHY_HT_RF_SEQ_TRIG_RX2TX); |
| b43_phy_ht_force_rf_sequence(dev, B43_PHY_HT_RF_SEQ_TRIG_RST2RX); |
| b43_phy_ht_pa_override(dev, true); |
| |
| /* TODO: Should we restore it? Or store it in global PHY info? */ |
| b43_phy_ht_classifier(dev, 0, 0); |
| b43_phy_ht_read_clip_detection(dev, clip_state); |
| |
| if (b43_current_band(dev->wl) == NL80211_BAND_2GHZ) |
| b43_phy_ht_bphy_init(dev); |
| |
| b43_httab_write_bulk(dev, B43_HTTAB32(0x1a, 0xc0), |
| B43_HTTAB_1A_C0_LATE_SIZE, b43_httab_0x1a_0xc0_late); |
| |
| saved_tx_pwr_ctl = phy_ht->tx_pwr_ctl; |
| b43_phy_ht_tx_power_fix(dev); |
| b43_phy_ht_tx_power_ctl(dev, false); |
| b43_phy_ht_tx_power_ctl_idle_tssi(dev); |
| b43_phy_ht_tx_power_ctl_setup(dev); |
| b43_phy_ht_tssi_setup(dev); |
| b43_phy_ht_tx_power_ctl(dev, saved_tx_pwr_ctl); |
| |
| return 0; |
| } |
| |
| static void b43_phy_ht_op_free(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| struct b43_phy_ht *phy_ht = phy->ht; |
| |
| kfree(phy_ht); |
| phy->ht = NULL; |
| } |
| |
| /* http://bcm-v4.sipsolutions.net/802.11/Radio/Switch%20Radio */ |
| static void b43_phy_ht_op_software_rfkill(struct b43_wldev *dev, |
| bool blocked) |
| { |
| if (b43_read32(dev, B43_MMIO_MACCTL) & B43_MACCTL_ENABLED) |
| b43err(dev->wl, "MAC not suspended\n"); |
| |
| if (blocked) { |
| b43_phy_mask(dev, B43_PHY_HT_RF_CTL_CMD, |
| ~B43_PHY_HT_RF_CTL_CMD_CHIP0_PU); |
| } else { |
| if (dev->phy.radio_ver == 0x2059) |
| b43_radio_2059_init(dev); |
| else |
| B43_WARN_ON(1); |
| |
| b43_switch_channel(dev, dev->phy.channel); |
| } |
| } |
| |
| static void b43_phy_ht_op_switch_analog(struct b43_wldev *dev, bool on) |
| { |
| if (on) { |
| b43_phy_write(dev, B43_PHY_HT_AFE_C1, 0x00cd); |
| b43_phy_write(dev, B43_PHY_HT_AFE_C1_OVER, 0x0000); |
| b43_phy_write(dev, B43_PHY_HT_AFE_C2, 0x00cd); |
| b43_phy_write(dev, B43_PHY_HT_AFE_C2_OVER, 0x0000); |
| b43_phy_write(dev, B43_PHY_HT_AFE_C3, 0x00cd); |
| b43_phy_write(dev, B43_PHY_HT_AFE_C3_OVER, 0x0000); |
| } else { |
| b43_phy_write(dev, B43_PHY_HT_AFE_C1_OVER, 0x07ff); |
| b43_phy_write(dev, B43_PHY_HT_AFE_C1, 0x00fd); |
| b43_phy_write(dev, B43_PHY_HT_AFE_C2_OVER, 0x07ff); |
| b43_phy_write(dev, B43_PHY_HT_AFE_C2, 0x00fd); |
| b43_phy_write(dev, B43_PHY_HT_AFE_C3_OVER, 0x07ff); |
| b43_phy_write(dev, B43_PHY_HT_AFE_C3, 0x00fd); |
| } |
| } |
| |
| static int b43_phy_ht_op_switch_channel(struct b43_wldev *dev, |
| unsigned int new_channel) |
| { |
| struct ieee80211_channel *channel = dev->wl->hw->conf.chandef.chan; |
| enum nl80211_channel_type channel_type = |
| cfg80211_get_chandef_type(&dev->wl->hw->conf.chandef); |
| |
| if (b43_current_band(dev->wl) == NL80211_BAND_2GHZ) { |
| if ((new_channel < 1) || (new_channel > 14)) |
| return -EINVAL; |
| } else { |
| return -EINVAL; |
| } |
| |
| return b43_phy_ht_set_channel(dev, channel, channel_type); |
| } |
| |
| static unsigned int b43_phy_ht_op_get_default_chan(struct b43_wldev *dev) |
| { |
| if (b43_current_band(dev->wl) == NL80211_BAND_2GHZ) |
| return 11; |
| return 36; |
| } |
| |
| /************************************************** |
| * R/W ops. |
| **************************************************/ |
| |
| static void b43_phy_ht_op_maskset(struct b43_wldev *dev, u16 reg, u16 mask, |
| u16 set) |
| { |
| b43_write16f(dev, B43_MMIO_PHY_CONTROL, reg); |
| b43_write16(dev, B43_MMIO_PHY_DATA, |
| (b43_read16(dev, B43_MMIO_PHY_DATA) & mask) | set); |
| } |
| |
| static u16 b43_phy_ht_op_radio_read(struct b43_wldev *dev, u16 reg) |
| { |
| /* HT-PHY needs 0x200 for read access */ |
| reg |= 0x200; |
| |
| b43_write16f(dev, B43_MMIO_RADIO24_CONTROL, reg); |
| return b43_read16(dev, B43_MMIO_RADIO24_DATA); |
| } |
| |
| static void b43_phy_ht_op_radio_write(struct b43_wldev *dev, u16 reg, |
| u16 value) |
| { |
| b43_write16f(dev, B43_MMIO_RADIO24_CONTROL, reg); |
| b43_write16(dev, B43_MMIO_RADIO24_DATA, value); |
| } |
| |
| static enum b43_txpwr_result |
| b43_phy_ht_op_recalc_txpower(struct b43_wldev *dev, bool ignore_tssi) |
| { |
| return B43_TXPWR_RES_DONE; |
| } |
| |
| static void b43_phy_ht_op_adjust_txpower(struct b43_wldev *dev) |
| { |
| } |
| |
| /************************************************** |
| * PHY ops struct. |
| **************************************************/ |
| |
| const struct b43_phy_operations b43_phyops_ht = { |
| .allocate = b43_phy_ht_op_allocate, |
| .free = b43_phy_ht_op_free, |
| .prepare_structs = b43_phy_ht_op_prepare_structs, |
| .init = b43_phy_ht_op_init, |
| .phy_maskset = b43_phy_ht_op_maskset, |
| .radio_read = b43_phy_ht_op_radio_read, |
| .radio_write = b43_phy_ht_op_radio_write, |
| .software_rfkill = b43_phy_ht_op_software_rfkill, |
| .switch_analog = b43_phy_ht_op_switch_analog, |
| .switch_channel = b43_phy_ht_op_switch_channel, |
| .get_default_chan = b43_phy_ht_op_get_default_chan, |
| .recalc_txpower = b43_phy_ht_op_recalc_txpower, |
| .adjust_txpower = b43_phy_ht_op_adjust_txpower, |
| }; |