| /* |
| * Copyright (C) 2017 Pengutronix, Juergen Borleis <kernel@pengutronix.de> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/regmap.h> |
| #include <linux/mutex.h> |
| #include <linux/mii.h> |
| #include <linux/phy.h> |
| #include <linux/if_bridge.h> |
| #include <linux/etherdevice.h> |
| |
| #include "lan9303.h" |
| |
| #define LAN9303_NUM_PORTS 3 |
| |
| /* 13.2 System Control and Status Registers |
| * Multiply register number by 4 to get address offset. |
| */ |
| #define LAN9303_CHIP_REV 0x14 |
| # define LAN9303_CHIP_ID 0x9303 |
| #define LAN9303_IRQ_CFG 0x15 |
| # define LAN9303_IRQ_CFG_IRQ_ENABLE BIT(8) |
| # define LAN9303_IRQ_CFG_IRQ_POL BIT(4) |
| # define LAN9303_IRQ_CFG_IRQ_TYPE BIT(0) |
| #define LAN9303_INT_STS 0x16 |
| # define LAN9303_INT_STS_PHY_INT2 BIT(27) |
| # define LAN9303_INT_STS_PHY_INT1 BIT(26) |
| #define LAN9303_INT_EN 0x17 |
| # define LAN9303_INT_EN_PHY_INT2_EN BIT(27) |
| # define LAN9303_INT_EN_PHY_INT1_EN BIT(26) |
| #define LAN9303_HW_CFG 0x1D |
| # define LAN9303_HW_CFG_READY BIT(27) |
| # define LAN9303_HW_CFG_AMDX_EN_PORT2 BIT(26) |
| # define LAN9303_HW_CFG_AMDX_EN_PORT1 BIT(25) |
| #define LAN9303_PMI_DATA 0x29 |
| #define LAN9303_PMI_ACCESS 0x2A |
| # define LAN9303_PMI_ACCESS_PHY_ADDR(x) (((x) & 0x1f) << 11) |
| # define LAN9303_PMI_ACCESS_MIIRINDA(x) (((x) & 0x1f) << 6) |
| # define LAN9303_PMI_ACCESS_MII_BUSY BIT(0) |
| # define LAN9303_PMI_ACCESS_MII_WRITE BIT(1) |
| #define LAN9303_MANUAL_FC_1 0x68 |
| #define LAN9303_MANUAL_FC_2 0x69 |
| #define LAN9303_MANUAL_FC_0 0x6a |
| #define LAN9303_SWITCH_CSR_DATA 0x6b |
| #define LAN9303_SWITCH_CSR_CMD 0x6c |
| #define LAN9303_SWITCH_CSR_CMD_BUSY BIT(31) |
| #define LAN9303_SWITCH_CSR_CMD_RW BIT(30) |
| #define LAN9303_SWITCH_CSR_CMD_LANES (BIT(19) | BIT(18) | BIT(17) | BIT(16)) |
| #define LAN9303_VIRT_PHY_BASE 0x70 |
| #define LAN9303_VIRT_SPECIAL_CTRL 0x77 |
| #define LAN9303_VIRT_SPECIAL_TURBO BIT(10) /*Turbo MII Enable*/ |
| |
| /*13.4 Switch Fabric Control and Status Registers |
| * Accessed indirectly via SWITCH_CSR_CMD, SWITCH_CSR_DATA. |
| */ |
| #define LAN9303_SW_DEV_ID 0x0000 |
| #define LAN9303_SW_RESET 0x0001 |
| #define LAN9303_SW_RESET_RESET BIT(0) |
| #define LAN9303_SW_IMR 0x0004 |
| #define LAN9303_SW_IPR 0x0005 |
| #define LAN9303_MAC_VER_ID_0 0x0400 |
| #define LAN9303_MAC_RX_CFG_0 0x0401 |
| # define LAN9303_MAC_RX_CFG_X_REJECT_MAC_TYPES BIT(1) |
| # define LAN9303_MAC_RX_CFG_X_RX_ENABLE BIT(0) |
| #define LAN9303_MAC_RX_UNDSZE_CNT_0 0x0410 |
| #define LAN9303_MAC_RX_64_CNT_0 0x0411 |
| #define LAN9303_MAC_RX_127_CNT_0 0x0412 |
| #define LAN9303_MAC_RX_255_CNT_0 0x413 |
| #define LAN9303_MAC_RX_511_CNT_0 0x0414 |
| #define LAN9303_MAC_RX_1023_CNT_0 0x0415 |
| #define LAN9303_MAC_RX_MAX_CNT_0 0x0416 |
| #define LAN9303_MAC_RX_OVRSZE_CNT_0 0x0417 |
| #define LAN9303_MAC_RX_PKTOK_CNT_0 0x0418 |
| #define LAN9303_MAC_RX_CRCERR_CNT_0 0x0419 |
| #define LAN9303_MAC_RX_MULCST_CNT_0 0x041a |
| #define LAN9303_MAC_RX_BRDCST_CNT_0 0x041b |
| #define LAN9303_MAC_RX_PAUSE_CNT_0 0x041c |
| #define LAN9303_MAC_RX_FRAG_CNT_0 0x041d |
| #define LAN9303_MAC_RX_JABB_CNT_0 0x041e |
| #define LAN9303_MAC_RX_ALIGN_CNT_0 0x041f |
| #define LAN9303_MAC_RX_PKTLEN_CNT_0 0x0420 |
| #define LAN9303_MAC_RX_GOODPKTLEN_CNT_0 0x0421 |
| #define LAN9303_MAC_RX_SYMBL_CNT_0 0x0422 |
| #define LAN9303_MAC_RX_CTLFRM_CNT_0 0x0423 |
| |
| #define LAN9303_MAC_TX_CFG_0 0x0440 |
| # define LAN9303_MAC_TX_CFG_X_TX_IFG_CONFIG_DEFAULT (21 << 2) |
| # define LAN9303_MAC_TX_CFG_X_TX_PAD_ENABLE BIT(1) |
| # define LAN9303_MAC_TX_CFG_X_TX_ENABLE BIT(0) |
| #define LAN9303_MAC_TX_DEFER_CNT_0 0x0451 |
| #define LAN9303_MAC_TX_PAUSE_CNT_0 0x0452 |
| #define LAN9303_MAC_TX_PKTOK_CNT_0 0x0453 |
| #define LAN9303_MAC_TX_64_CNT_0 0x0454 |
| #define LAN9303_MAC_TX_127_CNT_0 0x0455 |
| #define LAN9303_MAC_TX_255_CNT_0 0x0456 |
| #define LAN9303_MAC_TX_511_CNT_0 0x0457 |
| #define LAN9303_MAC_TX_1023_CNT_0 0x0458 |
| #define LAN9303_MAC_TX_MAX_CNT_0 0x0459 |
| #define LAN9303_MAC_TX_UNDSZE_CNT_0 0x045a |
| #define LAN9303_MAC_TX_PKTLEN_CNT_0 0x045c |
| #define LAN9303_MAC_TX_BRDCST_CNT_0 0x045d |
| #define LAN9303_MAC_TX_MULCST_CNT_0 0x045e |
| #define LAN9303_MAC_TX_LATECOL_0 0x045f |
| #define LAN9303_MAC_TX_EXCOL_CNT_0 0x0460 |
| #define LAN9303_MAC_TX_SNGLECOL_CNT_0 0x0461 |
| #define LAN9303_MAC_TX_MULTICOL_CNT_0 0x0462 |
| #define LAN9303_MAC_TX_TOTALCOL_CNT_0 0x0463 |
| |
| #define LAN9303_MAC_VER_ID_1 0x0800 |
| #define LAN9303_MAC_RX_CFG_1 0x0801 |
| #define LAN9303_MAC_TX_CFG_1 0x0840 |
| #define LAN9303_MAC_VER_ID_2 0x0c00 |
| #define LAN9303_MAC_RX_CFG_2 0x0c01 |
| #define LAN9303_MAC_TX_CFG_2 0x0c40 |
| #define LAN9303_SWE_ALR_CMD 0x1800 |
| # define LAN9303_ALR_CMD_MAKE_ENTRY BIT(2) |
| # define LAN9303_ALR_CMD_GET_FIRST BIT(1) |
| # define LAN9303_ALR_CMD_GET_NEXT BIT(0) |
| #define LAN9303_SWE_ALR_WR_DAT_0 0x1801 |
| #define LAN9303_SWE_ALR_WR_DAT_1 0x1802 |
| # define LAN9303_ALR_DAT1_VALID BIT(26) |
| # define LAN9303_ALR_DAT1_END_OF_TABL BIT(25) |
| # define LAN9303_ALR_DAT1_AGE_OVERRID BIT(25) |
| # define LAN9303_ALR_DAT1_STATIC BIT(24) |
| # define LAN9303_ALR_DAT1_PORT_BITOFFS 16 |
| # define LAN9303_ALR_DAT1_PORT_MASK (7 << LAN9303_ALR_DAT1_PORT_BITOFFS) |
| #define LAN9303_SWE_ALR_RD_DAT_0 0x1805 |
| #define LAN9303_SWE_ALR_RD_DAT_1 0x1806 |
| #define LAN9303_SWE_ALR_CMD_STS 0x1808 |
| # define ALR_STS_MAKE_PEND BIT(0) |
| #define LAN9303_SWE_VLAN_CMD 0x180b |
| # define LAN9303_SWE_VLAN_CMD_RNW BIT(5) |
| # define LAN9303_SWE_VLAN_CMD_PVIDNVLAN BIT(4) |
| #define LAN9303_SWE_VLAN_WR_DATA 0x180c |
| #define LAN9303_SWE_VLAN_RD_DATA 0x180e |
| # define LAN9303_SWE_VLAN_MEMBER_PORT2 BIT(17) |
| # define LAN9303_SWE_VLAN_UNTAG_PORT2 BIT(16) |
| # define LAN9303_SWE_VLAN_MEMBER_PORT1 BIT(15) |
| # define LAN9303_SWE_VLAN_UNTAG_PORT1 BIT(14) |
| # define LAN9303_SWE_VLAN_MEMBER_PORT0 BIT(13) |
| # define LAN9303_SWE_VLAN_UNTAG_PORT0 BIT(12) |
| #define LAN9303_SWE_VLAN_CMD_STS 0x1810 |
| #define LAN9303_SWE_GLB_INGRESS_CFG 0x1840 |
| # define LAN9303_SWE_GLB_INGR_IGMP_TRAP BIT(7) |
| # define LAN9303_SWE_GLB_INGR_IGMP_PORT(p) BIT(10 + p) |
| #define LAN9303_SWE_PORT_STATE 0x1843 |
| # define LAN9303_SWE_PORT_STATE_FORWARDING_PORT2 (0) |
| # define LAN9303_SWE_PORT_STATE_LEARNING_PORT2 BIT(5) |
| # define LAN9303_SWE_PORT_STATE_BLOCKING_PORT2 BIT(4) |
| # define LAN9303_SWE_PORT_STATE_FORWARDING_PORT1 (0) |
| # define LAN9303_SWE_PORT_STATE_LEARNING_PORT1 BIT(3) |
| # define LAN9303_SWE_PORT_STATE_BLOCKING_PORT1 BIT(2) |
| # define LAN9303_SWE_PORT_STATE_FORWARDING_PORT0 (0) |
| # define LAN9303_SWE_PORT_STATE_LEARNING_PORT0 BIT(1) |
| # define LAN9303_SWE_PORT_STATE_BLOCKING_PORT0 BIT(0) |
| # define LAN9303_SWE_PORT_STATE_DISABLED_PORT0 (3) |
| #define LAN9303_SWE_PORT_MIRROR 0x1846 |
| # define LAN9303_SWE_PORT_MIRROR_SNIFF_ALL BIT(8) |
| # define LAN9303_SWE_PORT_MIRROR_SNIFFER_PORT2 BIT(7) |
| # define LAN9303_SWE_PORT_MIRROR_SNIFFER_PORT1 BIT(6) |
| # define LAN9303_SWE_PORT_MIRROR_SNIFFER_PORT0 BIT(5) |
| # define LAN9303_SWE_PORT_MIRROR_MIRRORED_PORT2 BIT(4) |
| # define LAN9303_SWE_PORT_MIRROR_MIRRORED_PORT1 BIT(3) |
| # define LAN9303_SWE_PORT_MIRROR_MIRRORED_PORT0 BIT(2) |
| # define LAN9303_SWE_PORT_MIRROR_ENABLE_RX_MIRRORING BIT(1) |
| # define LAN9303_SWE_PORT_MIRROR_ENABLE_TX_MIRRORING BIT(0) |
| # define LAN9303_SWE_PORT_MIRROR_DISABLED 0 |
| #define LAN9303_SWE_INGRESS_PORT_TYPE 0x1847 |
| #define LAN9303_SWE_INGRESS_PORT_TYPE_VLAN 3 |
| #define LAN9303_BM_CFG 0x1c00 |
| #define LAN9303_BM_EGRSS_PORT_TYPE 0x1c0c |
| # define LAN9303_BM_EGRSS_PORT_TYPE_SPECIAL_TAG_PORT2 (BIT(17) | BIT(16)) |
| # define LAN9303_BM_EGRSS_PORT_TYPE_SPECIAL_TAG_PORT1 (BIT(9) | BIT(8)) |
| # define LAN9303_BM_EGRSS_PORT_TYPE_SPECIAL_TAG_PORT0 (BIT(1) | BIT(0)) |
| |
| #define LAN9303_SWITCH_PORT_REG(port, reg0) (0x400 * (port) + (reg0)) |
| |
| /* the built-in PHYs are of type LAN911X */ |
| #define MII_LAN911X_SPECIAL_MODES 0x12 |
| #define MII_LAN911X_SPECIAL_CONTROL_STATUS 0x1f |
| |
| static const struct regmap_range lan9303_valid_regs[] = { |
| regmap_reg_range(0x14, 0x17), /* misc, interrupt */ |
| regmap_reg_range(0x19, 0x19), /* endian test */ |
| regmap_reg_range(0x1d, 0x1d), /* hardware config */ |
| regmap_reg_range(0x23, 0x24), /* general purpose timer */ |
| regmap_reg_range(0x27, 0x27), /* counter */ |
| regmap_reg_range(0x29, 0x2a), /* PMI index regs */ |
| regmap_reg_range(0x68, 0x6a), /* flow control */ |
| regmap_reg_range(0x6b, 0x6c), /* switch fabric indirect regs */ |
| regmap_reg_range(0x6d, 0x6f), /* misc */ |
| regmap_reg_range(0x70, 0x77), /* virtual phy */ |
| regmap_reg_range(0x78, 0x7a), /* GPIO */ |
| regmap_reg_range(0x7c, 0x7e), /* MAC & reset */ |
| regmap_reg_range(0x80, 0xb7), /* switch fabric direct regs (wr only) */ |
| }; |
| |
| static const struct regmap_range lan9303_reserved_ranges[] = { |
| regmap_reg_range(0x00, 0x13), |
| regmap_reg_range(0x18, 0x18), |
| regmap_reg_range(0x1a, 0x1c), |
| regmap_reg_range(0x1e, 0x22), |
| regmap_reg_range(0x25, 0x26), |
| regmap_reg_range(0x28, 0x28), |
| regmap_reg_range(0x2b, 0x67), |
| regmap_reg_range(0x7b, 0x7b), |
| regmap_reg_range(0x7f, 0x7f), |
| regmap_reg_range(0xb8, 0xff), |
| }; |
| |
| const struct regmap_access_table lan9303_register_set = { |
| .yes_ranges = lan9303_valid_regs, |
| .n_yes_ranges = ARRAY_SIZE(lan9303_valid_regs), |
| .no_ranges = lan9303_reserved_ranges, |
| .n_no_ranges = ARRAY_SIZE(lan9303_reserved_ranges), |
| }; |
| EXPORT_SYMBOL(lan9303_register_set); |
| |
| static int lan9303_read(struct regmap *regmap, unsigned int offset, u32 *reg) |
| { |
| int ret, i; |
| |
| /* we can lose arbitration for the I2C case, because the device |
| * tries to detect and read an external EEPROM after reset and acts as |
| * a master on the shared I2C bus itself. This conflicts with our |
| * attempts to access the device as a slave at the same moment. |
| */ |
| for (i = 0; i < 5; i++) { |
| ret = regmap_read(regmap, offset, reg); |
| if (!ret) |
| return 0; |
| if (ret != -EAGAIN) |
| break; |
| msleep(500); |
| } |
| |
| return -EIO; |
| } |
| |
| static int lan9303_read_wait(struct lan9303 *chip, int offset, u32 mask) |
| { |
| int i; |
| |
| for (i = 0; i < 25; i++) { |
| u32 reg; |
| int ret; |
| |
| ret = lan9303_read(chip->regmap, offset, ®); |
| if (ret) { |
| dev_err(chip->dev, "%s failed to read offset %d: %d\n", |
| __func__, offset, ret); |
| return ret; |
| } |
| if (!(reg & mask)) |
| return 0; |
| usleep_range(1000, 2000); |
| } |
| |
| return -ETIMEDOUT; |
| } |
| |
| static int lan9303_virt_phy_reg_read(struct lan9303 *chip, int regnum) |
| { |
| int ret; |
| u32 val; |
| |
| if (regnum > MII_EXPANSION) |
| return -EINVAL; |
| |
| ret = lan9303_read(chip->regmap, LAN9303_VIRT_PHY_BASE + regnum, &val); |
| if (ret) |
| return ret; |
| |
| return val & 0xffff; |
| } |
| |
| static int lan9303_virt_phy_reg_write(struct lan9303 *chip, int regnum, u16 val) |
| { |
| if (regnum > MII_EXPANSION) |
| return -EINVAL; |
| |
| return regmap_write(chip->regmap, LAN9303_VIRT_PHY_BASE + regnum, val); |
| } |
| |
| static int lan9303_indirect_phy_wait_for_completion(struct lan9303 *chip) |
| { |
| return lan9303_read_wait(chip, LAN9303_PMI_ACCESS, |
| LAN9303_PMI_ACCESS_MII_BUSY); |
| } |
| |
| static int lan9303_indirect_phy_read(struct lan9303 *chip, int addr, int regnum) |
| { |
| int ret; |
| u32 val; |
| |
| val = LAN9303_PMI_ACCESS_PHY_ADDR(addr); |
| val |= LAN9303_PMI_ACCESS_MIIRINDA(regnum); |
| |
| mutex_lock(&chip->indirect_mutex); |
| |
| ret = lan9303_indirect_phy_wait_for_completion(chip); |
| if (ret) |
| goto on_error; |
| |
| /* start the MII read cycle */ |
| ret = regmap_write(chip->regmap, LAN9303_PMI_ACCESS, val); |
| if (ret) |
| goto on_error; |
| |
| ret = lan9303_indirect_phy_wait_for_completion(chip); |
| if (ret) |
| goto on_error; |
| |
| /* read the result of this operation */ |
| ret = lan9303_read(chip->regmap, LAN9303_PMI_DATA, &val); |
| if (ret) |
| goto on_error; |
| |
| mutex_unlock(&chip->indirect_mutex); |
| |
| return val & 0xffff; |
| |
| on_error: |
| mutex_unlock(&chip->indirect_mutex); |
| return ret; |
| } |
| |
| static int lan9303_indirect_phy_write(struct lan9303 *chip, int addr, |
| int regnum, u16 val) |
| { |
| int ret; |
| u32 reg; |
| |
| reg = LAN9303_PMI_ACCESS_PHY_ADDR(addr); |
| reg |= LAN9303_PMI_ACCESS_MIIRINDA(regnum); |
| reg |= LAN9303_PMI_ACCESS_MII_WRITE; |
| |
| mutex_lock(&chip->indirect_mutex); |
| |
| ret = lan9303_indirect_phy_wait_for_completion(chip); |
| if (ret) |
| goto on_error; |
| |
| /* write the data first... */ |
| ret = regmap_write(chip->regmap, LAN9303_PMI_DATA, val); |
| if (ret) |
| goto on_error; |
| |
| /* ...then start the MII write cycle */ |
| ret = regmap_write(chip->regmap, LAN9303_PMI_ACCESS, reg); |
| |
| on_error: |
| mutex_unlock(&chip->indirect_mutex); |
| return ret; |
| } |
| |
| const struct lan9303_phy_ops lan9303_indirect_phy_ops = { |
| .phy_read = lan9303_indirect_phy_read, |
| .phy_write = lan9303_indirect_phy_write, |
| }; |
| EXPORT_SYMBOL_GPL(lan9303_indirect_phy_ops); |
| |
| static int lan9303_switch_wait_for_completion(struct lan9303 *chip) |
| { |
| return lan9303_read_wait(chip, LAN9303_SWITCH_CSR_CMD, |
| LAN9303_SWITCH_CSR_CMD_BUSY); |
| } |
| |
| static int lan9303_write_switch_reg(struct lan9303 *chip, u16 regnum, u32 val) |
| { |
| u32 reg; |
| int ret; |
| |
| reg = regnum; |
| reg |= LAN9303_SWITCH_CSR_CMD_LANES; |
| reg |= LAN9303_SWITCH_CSR_CMD_BUSY; |
| |
| mutex_lock(&chip->indirect_mutex); |
| |
| ret = lan9303_switch_wait_for_completion(chip); |
| if (ret) |
| goto on_error; |
| |
| ret = regmap_write(chip->regmap, LAN9303_SWITCH_CSR_DATA, val); |
| if (ret) { |
| dev_err(chip->dev, "Failed to write csr data reg: %d\n", ret); |
| goto on_error; |
| } |
| |
| /* trigger write */ |
| ret = regmap_write(chip->regmap, LAN9303_SWITCH_CSR_CMD, reg); |
| if (ret) |
| dev_err(chip->dev, "Failed to write csr command reg: %d\n", |
| ret); |
| |
| on_error: |
| mutex_unlock(&chip->indirect_mutex); |
| return ret; |
| } |
| |
| static int lan9303_read_switch_reg(struct lan9303 *chip, u16 regnum, u32 *val) |
| { |
| u32 reg; |
| int ret; |
| |
| reg = regnum; |
| reg |= LAN9303_SWITCH_CSR_CMD_LANES; |
| reg |= LAN9303_SWITCH_CSR_CMD_RW; |
| reg |= LAN9303_SWITCH_CSR_CMD_BUSY; |
| |
| mutex_lock(&chip->indirect_mutex); |
| |
| ret = lan9303_switch_wait_for_completion(chip); |
| if (ret) |
| goto on_error; |
| |
| /* trigger read */ |
| ret = regmap_write(chip->regmap, LAN9303_SWITCH_CSR_CMD, reg); |
| if (ret) { |
| dev_err(chip->dev, "Failed to write csr command reg: %d\n", |
| ret); |
| goto on_error; |
| } |
| |
| ret = lan9303_switch_wait_for_completion(chip); |
| if (ret) |
| goto on_error; |
| |
| ret = lan9303_read(chip->regmap, LAN9303_SWITCH_CSR_DATA, val); |
| if (ret) |
| dev_err(chip->dev, "Failed to read csr data reg: %d\n", ret); |
| on_error: |
| mutex_unlock(&chip->indirect_mutex); |
| return ret; |
| } |
| |
| static int lan9303_write_switch_reg_mask(struct lan9303 *chip, u16 regnum, |
| u32 val, u32 mask) |
| { |
| int ret; |
| u32 reg; |
| |
| ret = lan9303_read_switch_reg(chip, regnum, ®); |
| if (ret) |
| return ret; |
| |
| reg = (reg & ~mask) | val; |
| |
| return lan9303_write_switch_reg(chip, regnum, reg); |
| } |
| |
| static int lan9303_write_switch_port(struct lan9303 *chip, int port, |
| u16 regnum, u32 val) |
| { |
| return lan9303_write_switch_reg( |
| chip, LAN9303_SWITCH_PORT_REG(port, regnum), val); |
| } |
| |
| static int lan9303_read_switch_port(struct lan9303 *chip, int port, |
| u16 regnum, u32 *val) |
| { |
| return lan9303_read_switch_reg( |
| chip, LAN9303_SWITCH_PORT_REG(port, regnum), val); |
| } |
| |
| static int lan9303_detect_phy_setup(struct lan9303 *chip) |
| { |
| int reg; |
| |
| /* Calculate chip->phy_addr_base: |
| * Depending on the 'phy_addr_sel_strap' setting, the three phys are |
| * using IDs 0-1-2 or IDs 1-2-3. We cannot read back the |
| * 'phy_addr_sel_strap' setting directly, so we need a test, which |
| * configuration is active: |
| * Special reg 18 of phy 3 reads as 0x0000, if 'phy_addr_sel_strap' is 0 |
| * and the IDs are 0-1-2, else it contains something different from |
| * 0x0000, which means 'phy_addr_sel_strap' is 1 and the IDs are 1-2-3. |
| * 0xffff is returned on MDIO read with no response. |
| */ |
| reg = chip->ops->phy_read(chip, 3, MII_LAN911X_SPECIAL_MODES); |
| if (reg < 0) { |
| dev_err(chip->dev, "Failed to detect phy config: %d\n", reg); |
| return reg; |
| } |
| |
| chip->phy_addr_base = reg != 0 && reg != 0xffff; |
| |
| dev_dbg(chip->dev, "Phy setup '%s' detected\n", |
| chip->phy_addr_base ? "1-2-3" : "0-1-2"); |
| |
| return 0; |
| } |
| |
| /* Map ALR-port bits to port bitmap, and back */ |
| static const int alrport_2_portmap[] = {1, 2, 4, 0, 3, 5, 6, 7 }; |
| static const int portmap_2_alrport[] = {3, 0, 1, 4, 2, 5, 6, 7 }; |
| |
| /* Return pointer to first free ALR cache entry, return NULL if none */ |
| static struct lan9303_alr_cache_entry * |
| lan9303_alr_cache_find_free(struct lan9303 *chip) |
| { |
| int i; |
| struct lan9303_alr_cache_entry *entr = chip->alr_cache; |
| |
| for (i = 0; i < LAN9303_NUM_ALR_RECORDS; i++, entr++) |
| if (entr->port_map == 0) |
| return entr; |
| |
| return NULL; |
| } |
| |
| /* Return pointer to ALR cache entry matching MAC address */ |
| static struct lan9303_alr_cache_entry * |
| lan9303_alr_cache_find_mac(struct lan9303 *chip, const u8 *mac_addr) |
| { |
| int i; |
| struct lan9303_alr_cache_entry *entr = chip->alr_cache; |
| |
| BUILD_BUG_ON_MSG(sizeof(struct lan9303_alr_cache_entry) & 1, |
| "ether_addr_equal require u16 alignment"); |
| |
| for (i = 0; i < LAN9303_NUM_ALR_RECORDS; i++, entr++) |
| if (ether_addr_equal(entr->mac_addr, mac_addr)) |
| return entr; |
| |
| return NULL; |
| } |
| |
| static int lan9303_csr_reg_wait(struct lan9303 *chip, int regno, u32 mask) |
| { |
| int i; |
| |
| for (i = 0; i < 25; i++) { |
| u32 reg; |
| |
| lan9303_read_switch_reg(chip, regno, ®); |
| if (!(reg & mask)) |
| return 0; |
| usleep_range(1000, 2000); |
| } |
| |
| return -ETIMEDOUT; |
| } |
| |
| static int lan9303_alr_make_entry_raw(struct lan9303 *chip, u32 dat0, u32 dat1) |
| { |
| lan9303_write_switch_reg(chip, LAN9303_SWE_ALR_WR_DAT_0, dat0); |
| lan9303_write_switch_reg(chip, LAN9303_SWE_ALR_WR_DAT_1, dat1); |
| lan9303_write_switch_reg(chip, LAN9303_SWE_ALR_CMD, |
| LAN9303_ALR_CMD_MAKE_ENTRY); |
| lan9303_csr_reg_wait(chip, LAN9303_SWE_ALR_CMD_STS, ALR_STS_MAKE_PEND); |
| lan9303_write_switch_reg(chip, LAN9303_SWE_ALR_CMD, 0); |
| |
| return 0; |
| } |
| |
| typedef int alr_loop_cb_t(struct lan9303 *chip, u32 dat0, u32 dat1, |
| int portmap, void *ctx); |
| |
| static int lan9303_alr_loop(struct lan9303 *chip, alr_loop_cb_t *cb, void *ctx) |
| { |
| int ret = 0, i; |
| |
| mutex_lock(&chip->alr_mutex); |
| lan9303_write_switch_reg(chip, LAN9303_SWE_ALR_CMD, |
| LAN9303_ALR_CMD_GET_FIRST); |
| lan9303_write_switch_reg(chip, LAN9303_SWE_ALR_CMD, 0); |
| |
| for (i = 1; i < LAN9303_NUM_ALR_RECORDS; i++) { |
| u32 dat0, dat1; |
| int alrport, portmap; |
| |
| lan9303_read_switch_reg(chip, LAN9303_SWE_ALR_RD_DAT_0, &dat0); |
| lan9303_read_switch_reg(chip, LAN9303_SWE_ALR_RD_DAT_1, &dat1); |
| if (dat1 & LAN9303_ALR_DAT1_END_OF_TABL) |
| break; |
| |
| alrport = (dat1 & LAN9303_ALR_DAT1_PORT_MASK) >> |
| LAN9303_ALR_DAT1_PORT_BITOFFS; |
| portmap = alrport_2_portmap[alrport]; |
| |
| ret = cb(chip, dat0, dat1, portmap, ctx); |
| if (ret) |
| break; |
| |
| lan9303_write_switch_reg(chip, LAN9303_SWE_ALR_CMD, |
| LAN9303_ALR_CMD_GET_NEXT); |
| lan9303_write_switch_reg(chip, LAN9303_SWE_ALR_CMD, 0); |
| } |
| mutex_unlock(&chip->alr_mutex); |
| |
| return ret; |
| } |
| |
| static void alr_reg_to_mac(u32 dat0, u32 dat1, u8 mac[6]) |
| { |
| mac[0] = (dat0 >> 0) & 0xff; |
| mac[1] = (dat0 >> 8) & 0xff; |
| mac[2] = (dat0 >> 16) & 0xff; |
| mac[3] = (dat0 >> 24) & 0xff; |
| mac[4] = (dat1 >> 0) & 0xff; |
| mac[5] = (dat1 >> 8) & 0xff; |
| } |
| |
| struct del_port_learned_ctx { |
| int port; |
| }; |
| |
| /* Clear learned (non-static) entry on given port */ |
| static int alr_loop_cb_del_port_learned(struct lan9303 *chip, u32 dat0, |
| u32 dat1, int portmap, void *ctx) |
| { |
| struct del_port_learned_ctx *del_ctx = ctx; |
| int port = del_ctx->port; |
| |
| if (((BIT(port) & portmap) == 0) || (dat1 & LAN9303_ALR_DAT1_STATIC)) |
| return 0; |
| |
| /* learned entries has only one port, we can just delete */ |
| dat1 &= ~LAN9303_ALR_DAT1_VALID; /* delete entry */ |
| lan9303_alr_make_entry_raw(chip, dat0, dat1); |
| |
| return 0; |
| } |
| |
| struct port_fdb_dump_ctx { |
| int port; |
| void *data; |
| dsa_fdb_dump_cb_t *cb; |
| }; |
| |
| static int alr_loop_cb_fdb_port_dump(struct lan9303 *chip, u32 dat0, |
| u32 dat1, int portmap, void *ctx) |
| { |
| struct port_fdb_dump_ctx *dump_ctx = ctx; |
| u8 mac[ETH_ALEN]; |
| bool is_static; |
| |
| if ((BIT(dump_ctx->port) & portmap) == 0) |
| return 0; |
| |
| alr_reg_to_mac(dat0, dat1, mac); |
| is_static = !!(dat1 & LAN9303_ALR_DAT1_STATIC); |
| return dump_ctx->cb(mac, 0, is_static, dump_ctx->data); |
| } |
| |
| /* Set a static ALR entry. Delete entry if port_map is zero */ |
| static void lan9303_alr_set_entry(struct lan9303 *chip, const u8 *mac, |
| u8 port_map, bool stp_override) |
| { |
| u32 dat0, dat1, alr_port; |
| |
| dev_dbg(chip->dev, "%s(%pM, %d)\n", __func__, mac, port_map); |
| dat1 = LAN9303_ALR_DAT1_STATIC; |
| if (port_map) |
| dat1 |= LAN9303_ALR_DAT1_VALID; |
| /* otherwise no ports: delete entry */ |
| if (stp_override) |
| dat1 |= LAN9303_ALR_DAT1_AGE_OVERRID; |
| |
| alr_port = portmap_2_alrport[port_map & 7]; |
| dat1 &= ~LAN9303_ALR_DAT1_PORT_MASK; |
| dat1 |= alr_port << LAN9303_ALR_DAT1_PORT_BITOFFS; |
| |
| dat0 = 0; |
| dat0 |= (mac[0] << 0); |
| dat0 |= (mac[1] << 8); |
| dat0 |= (mac[2] << 16); |
| dat0 |= (mac[3] << 24); |
| |
| dat1 |= (mac[4] << 0); |
| dat1 |= (mac[5] << 8); |
| |
| lan9303_alr_make_entry_raw(chip, dat0, dat1); |
| } |
| |
| /* Add port to static ALR entry, create new static entry if needed */ |
| static int lan9303_alr_add_port(struct lan9303 *chip, const u8 *mac, int port, |
| bool stp_override) |
| { |
| struct lan9303_alr_cache_entry *entr; |
| |
| mutex_lock(&chip->alr_mutex); |
| entr = lan9303_alr_cache_find_mac(chip, mac); |
| if (!entr) { /*New entry */ |
| entr = lan9303_alr_cache_find_free(chip); |
| if (!entr) { |
| mutex_unlock(&chip->alr_mutex); |
| return -ENOSPC; |
| } |
| ether_addr_copy(entr->mac_addr, mac); |
| } |
| entr->port_map |= BIT(port); |
| entr->stp_override = stp_override; |
| lan9303_alr_set_entry(chip, mac, entr->port_map, stp_override); |
| mutex_unlock(&chip->alr_mutex); |
| |
| return 0; |
| } |
| |
| /* Delete static port from ALR entry, delete entry if last port */ |
| static int lan9303_alr_del_port(struct lan9303 *chip, const u8 *mac, int port) |
| { |
| struct lan9303_alr_cache_entry *entr; |
| |
| mutex_lock(&chip->alr_mutex); |
| entr = lan9303_alr_cache_find_mac(chip, mac); |
| if (!entr) |
| goto out; /* no static entry found */ |
| |
| entr->port_map &= ~BIT(port); |
| if (entr->port_map == 0) /* zero means its free again */ |
| eth_zero_addr(entr->mac_addr); |
| lan9303_alr_set_entry(chip, mac, entr->port_map, entr->stp_override); |
| |
| out: |
| mutex_unlock(&chip->alr_mutex); |
| return 0; |
| } |
| |
| static int lan9303_disable_processing_port(struct lan9303 *chip, |
| unsigned int port) |
| { |
| int ret; |
| |
| /* disable RX, but keep register reset default values else */ |
| ret = lan9303_write_switch_port(chip, port, LAN9303_MAC_RX_CFG_0, |
| LAN9303_MAC_RX_CFG_X_REJECT_MAC_TYPES); |
| if (ret) |
| return ret; |
| |
| /* disable TX, but keep register reset default values else */ |
| return lan9303_write_switch_port(chip, port, LAN9303_MAC_TX_CFG_0, |
| LAN9303_MAC_TX_CFG_X_TX_IFG_CONFIG_DEFAULT | |
| LAN9303_MAC_TX_CFG_X_TX_PAD_ENABLE); |
| } |
| |
| static int lan9303_enable_processing_port(struct lan9303 *chip, |
| unsigned int port) |
| { |
| int ret; |
| |
| /* enable RX and keep register reset default values else */ |
| ret = lan9303_write_switch_port(chip, port, LAN9303_MAC_RX_CFG_0, |
| LAN9303_MAC_RX_CFG_X_REJECT_MAC_TYPES | |
| LAN9303_MAC_RX_CFG_X_RX_ENABLE); |
| if (ret) |
| return ret; |
| |
| /* enable TX and keep register reset default values else */ |
| return lan9303_write_switch_port(chip, port, LAN9303_MAC_TX_CFG_0, |
| LAN9303_MAC_TX_CFG_X_TX_IFG_CONFIG_DEFAULT | |
| LAN9303_MAC_TX_CFG_X_TX_PAD_ENABLE | |
| LAN9303_MAC_TX_CFG_X_TX_ENABLE); |
| } |
| |
| /* forward special tagged packets from port 0 to port 1 *or* port 2 */ |
| static int lan9303_setup_tagging(struct lan9303 *chip) |
| { |
| int ret; |
| u32 val; |
| /* enable defining the destination port via special VLAN tagging |
| * for port 0 |
| */ |
| ret = lan9303_write_switch_reg(chip, LAN9303_SWE_INGRESS_PORT_TYPE, |
| LAN9303_SWE_INGRESS_PORT_TYPE_VLAN); |
| if (ret) |
| return ret; |
| |
| /* tag incoming packets at port 1 and 2 on their way to port 0 to be |
| * able to discover their source port |
| */ |
| val = LAN9303_BM_EGRSS_PORT_TYPE_SPECIAL_TAG_PORT0; |
| return lan9303_write_switch_reg(chip, LAN9303_BM_EGRSS_PORT_TYPE, val); |
| } |
| |
| /* We want a special working switch: |
| * - do not forward packets between port 1 and 2 |
| * - forward everything from port 1 to port 0 |
| * - forward everything from port 2 to port 0 |
| */ |
| static int lan9303_separate_ports(struct lan9303 *chip) |
| { |
| int ret; |
| |
| lan9303_alr_del_port(chip, eth_stp_addr, 0); |
| ret = lan9303_write_switch_reg(chip, LAN9303_SWE_PORT_MIRROR, |
| LAN9303_SWE_PORT_MIRROR_SNIFFER_PORT0 | |
| LAN9303_SWE_PORT_MIRROR_MIRRORED_PORT1 | |
| LAN9303_SWE_PORT_MIRROR_MIRRORED_PORT2 | |
| LAN9303_SWE_PORT_MIRROR_ENABLE_RX_MIRRORING | |
| LAN9303_SWE_PORT_MIRROR_SNIFF_ALL); |
| if (ret) |
| return ret; |
| |
| /* prevent port 1 and 2 from forwarding packets by their own */ |
| return lan9303_write_switch_reg(chip, LAN9303_SWE_PORT_STATE, |
| LAN9303_SWE_PORT_STATE_FORWARDING_PORT0 | |
| LAN9303_SWE_PORT_STATE_BLOCKING_PORT1 | |
| LAN9303_SWE_PORT_STATE_BLOCKING_PORT2); |
| } |
| |
| static void lan9303_bridge_ports(struct lan9303 *chip) |
| { |
| /* ports bridged: remove mirroring */ |
| lan9303_write_switch_reg(chip, LAN9303_SWE_PORT_MIRROR, |
| LAN9303_SWE_PORT_MIRROR_DISABLED); |
| |
| lan9303_write_switch_reg(chip, LAN9303_SWE_PORT_STATE, |
| chip->swe_port_state); |
| lan9303_alr_add_port(chip, eth_stp_addr, 0, true); |
| } |
| |
| static void lan9303_handle_reset(struct lan9303 *chip) |
| { |
| if (!chip->reset_gpio) |
| return; |
| |
| if (chip->reset_duration != 0) |
| msleep(chip->reset_duration); |
| |
| /* release (deassert) reset and activate the device */ |
| gpiod_set_value_cansleep(chip->reset_gpio, 0); |
| } |
| |
| /* stop processing packets for all ports */ |
| static int lan9303_disable_processing(struct lan9303 *chip) |
| { |
| int p; |
| |
| for (p = 1; p < LAN9303_NUM_PORTS; p++) { |
| int ret = lan9303_disable_processing_port(chip, p); |
| |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int lan9303_check_device(struct lan9303 *chip) |
| { |
| int ret; |
| u32 reg; |
| |
| ret = lan9303_read(chip->regmap, LAN9303_CHIP_REV, ®); |
| if (ret) { |
| dev_err(chip->dev, "failed to read chip revision register: %d\n", |
| ret); |
| if (!chip->reset_gpio) { |
| dev_dbg(chip->dev, |
| "hint: maybe failed due to missing reset GPIO\n"); |
| } |
| return ret; |
| } |
| |
| if ((reg >> 16) != LAN9303_CHIP_ID) { |
| dev_err(chip->dev, "expecting LAN9303 chip, but found: %X\n", |
| reg >> 16); |
| return -ENODEV; |
| } |
| |
| /* The default state of the LAN9303 device is to forward packets between |
| * all ports (if not configured differently by an external EEPROM). |
| * The initial state of a DSA device must be forwarding packets only |
| * between the external and the internal ports and no forwarding |
| * between the external ports. In preparation we stop packet handling |
| * at all for now until the LAN9303 device is re-programmed accordingly. |
| */ |
| ret = lan9303_disable_processing(chip); |
| if (ret) |
| dev_warn(chip->dev, "failed to disable switching %d\n", ret); |
| |
| dev_info(chip->dev, "Found LAN9303 rev. %u\n", reg & 0xffff); |
| |
| ret = lan9303_detect_phy_setup(chip); |
| if (ret) { |
| dev_err(chip->dev, |
| "failed to discover phy bootstrap setup: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /* ---------------------------- DSA -----------------------------------*/ |
| |
| static enum dsa_tag_protocol lan9303_get_tag_protocol(struct dsa_switch *ds, |
| int port) |
| { |
| return DSA_TAG_PROTO_LAN9303; |
| } |
| |
| static int lan9303_setup(struct dsa_switch *ds) |
| { |
| struct lan9303 *chip = ds->priv; |
| int ret; |
| |
| /* Make sure that port 0 is the cpu port */ |
| if (!dsa_is_cpu_port(ds, 0)) { |
| dev_err(chip->dev, "port 0 is not the CPU port\n"); |
| return -EINVAL; |
| } |
| |
| ret = lan9303_setup_tagging(chip); |
| if (ret) |
| dev_err(chip->dev, "failed to setup port tagging %d\n", ret); |
| |
| ret = lan9303_separate_ports(chip); |
| if (ret) |
| dev_err(chip->dev, "failed to separate ports %d\n", ret); |
| |
| ret = lan9303_enable_processing_port(chip, 0); |
| if (ret) |
| dev_err(chip->dev, "failed to re-enable switching %d\n", ret); |
| |
| /* Trap IGMP to port 0 */ |
| ret = lan9303_write_switch_reg_mask(chip, LAN9303_SWE_GLB_INGRESS_CFG, |
| LAN9303_SWE_GLB_INGR_IGMP_TRAP | |
| LAN9303_SWE_GLB_INGR_IGMP_PORT(0), |
| LAN9303_SWE_GLB_INGR_IGMP_PORT(1) | |
| LAN9303_SWE_GLB_INGR_IGMP_PORT(2)); |
| if (ret) |
| dev_err(chip->dev, "failed to setup IGMP trap %d\n", ret); |
| |
| return 0; |
| } |
| |
| struct lan9303_mib_desc { |
| unsigned int offset; /* offset of first MAC */ |
| const char *name; |
| }; |
| |
| static const struct lan9303_mib_desc lan9303_mib[] = { |
| { .offset = LAN9303_MAC_RX_BRDCST_CNT_0, .name = "RxBroad", }, |
| { .offset = LAN9303_MAC_RX_PAUSE_CNT_0, .name = "RxPause", }, |
| { .offset = LAN9303_MAC_RX_MULCST_CNT_0, .name = "RxMulti", }, |
| { .offset = LAN9303_MAC_RX_PKTOK_CNT_0, .name = "RxOk", }, |
| { .offset = LAN9303_MAC_RX_CRCERR_CNT_0, .name = "RxCrcErr", }, |
| { .offset = LAN9303_MAC_RX_ALIGN_CNT_0, .name = "RxAlignErr", }, |
| { .offset = LAN9303_MAC_RX_JABB_CNT_0, .name = "RxJabber", }, |
| { .offset = LAN9303_MAC_RX_FRAG_CNT_0, .name = "RxFragment", }, |
| { .offset = LAN9303_MAC_RX_64_CNT_0, .name = "Rx64Byte", }, |
| { .offset = LAN9303_MAC_RX_127_CNT_0, .name = "Rx128Byte", }, |
| { .offset = LAN9303_MAC_RX_255_CNT_0, .name = "Rx256Byte", }, |
| { .offset = LAN9303_MAC_RX_511_CNT_0, .name = "Rx512Byte", }, |
| { .offset = LAN9303_MAC_RX_1023_CNT_0, .name = "Rx1024Byte", }, |
| { .offset = LAN9303_MAC_RX_MAX_CNT_0, .name = "RxMaxByte", }, |
| { .offset = LAN9303_MAC_RX_PKTLEN_CNT_0, .name = "RxByteCnt", }, |
| { .offset = LAN9303_MAC_RX_SYMBL_CNT_0, .name = "RxSymbolCnt", }, |
| { .offset = LAN9303_MAC_RX_CTLFRM_CNT_0, .name = "RxCfs", }, |
| { .offset = LAN9303_MAC_RX_OVRSZE_CNT_0, .name = "RxOverFlow", }, |
| { .offset = LAN9303_MAC_TX_UNDSZE_CNT_0, .name = "TxShort", }, |
| { .offset = LAN9303_MAC_TX_BRDCST_CNT_0, .name = "TxBroad", }, |
| { .offset = LAN9303_MAC_TX_PAUSE_CNT_0, .name = "TxPause", }, |
| { .offset = LAN9303_MAC_TX_MULCST_CNT_0, .name = "TxMulti", }, |
| { .offset = LAN9303_MAC_RX_UNDSZE_CNT_0, .name = "TxUnderRun", }, |
| { .offset = LAN9303_MAC_TX_64_CNT_0, .name = "Tx64Byte", }, |
| { .offset = LAN9303_MAC_TX_127_CNT_0, .name = "Tx128Byte", }, |
| { .offset = LAN9303_MAC_TX_255_CNT_0, .name = "Tx256Byte", }, |
| { .offset = LAN9303_MAC_TX_511_CNT_0, .name = "Tx512Byte", }, |
| { .offset = LAN9303_MAC_TX_1023_CNT_0, .name = "Tx1024Byte", }, |
| { .offset = LAN9303_MAC_TX_MAX_CNT_0, .name = "TxMaxByte", }, |
| { .offset = LAN9303_MAC_TX_PKTLEN_CNT_0, .name = "TxByteCnt", }, |
| { .offset = LAN9303_MAC_TX_PKTOK_CNT_0, .name = "TxOk", }, |
| { .offset = LAN9303_MAC_TX_TOTALCOL_CNT_0, .name = "TxCollision", }, |
| { .offset = LAN9303_MAC_TX_MULTICOL_CNT_0, .name = "TxMultiCol", }, |
| { .offset = LAN9303_MAC_TX_SNGLECOL_CNT_0, .name = "TxSingleCol", }, |
| { .offset = LAN9303_MAC_TX_EXCOL_CNT_0, .name = "TxExcCol", }, |
| { .offset = LAN9303_MAC_TX_DEFER_CNT_0, .name = "TxDefer", }, |
| { .offset = LAN9303_MAC_TX_LATECOL_0, .name = "TxLateCol", }, |
| }; |
| |
| static void lan9303_get_strings(struct dsa_switch *ds, int port, |
| u32 stringset, uint8_t *data) |
| { |
| unsigned int u; |
| |
| if (stringset != ETH_SS_STATS) |
| return; |
| |
| for (u = 0; u < ARRAY_SIZE(lan9303_mib); u++) { |
| strncpy(data + u * ETH_GSTRING_LEN, lan9303_mib[u].name, |
| ETH_GSTRING_LEN); |
| } |
| } |
| |
| static void lan9303_get_ethtool_stats(struct dsa_switch *ds, int port, |
| uint64_t *data) |
| { |
| struct lan9303 *chip = ds->priv; |
| unsigned int u; |
| |
| for (u = 0; u < ARRAY_SIZE(lan9303_mib); u++) { |
| u32 reg; |
| int ret; |
| |
| ret = lan9303_read_switch_port( |
| chip, port, lan9303_mib[u].offset, ®); |
| |
| if (ret) |
| dev_warn(chip->dev, "Reading status port %d reg %u failed\n", |
| port, lan9303_mib[u].offset); |
| data[u] = reg; |
| } |
| } |
| |
| static int lan9303_get_sset_count(struct dsa_switch *ds, int port, int sset) |
| { |
| if (sset != ETH_SS_STATS) |
| return 0; |
| |
| return ARRAY_SIZE(lan9303_mib); |
| } |
| |
| static int lan9303_phy_read(struct dsa_switch *ds, int phy, int regnum) |
| { |
| struct lan9303 *chip = ds->priv; |
| int phy_base = chip->phy_addr_base; |
| |
| if (phy == phy_base) |
| return lan9303_virt_phy_reg_read(chip, regnum); |
| if (phy > phy_base + 2) |
| return -ENODEV; |
| |
| return chip->ops->phy_read(chip, phy, regnum); |
| } |
| |
| static int lan9303_phy_write(struct dsa_switch *ds, int phy, int regnum, |
| u16 val) |
| { |
| struct lan9303 *chip = ds->priv; |
| int phy_base = chip->phy_addr_base; |
| |
| if (phy == phy_base) |
| return lan9303_virt_phy_reg_write(chip, regnum, val); |
| if (phy > phy_base + 2) |
| return -ENODEV; |
| |
| return chip->ops->phy_write(chip, phy, regnum, val); |
| } |
| |
| static void lan9303_adjust_link(struct dsa_switch *ds, int port, |
| struct phy_device *phydev) |
| { |
| struct lan9303 *chip = ds->priv; |
| int ctl, res; |
| |
| if (!phy_is_pseudo_fixed_link(phydev)) |
| return; |
| |
| ctl = lan9303_phy_read(ds, port, MII_BMCR); |
| |
| ctl &= ~BMCR_ANENABLE; |
| |
| if (phydev->speed == SPEED_100) |
| ctl |= BMCR_SPEED100; |
| else if (phydev->speed == SPEED_10) |
| ctl &= ~BMCR_SPEED100; |
| else |
| dev_err(ds->dev, "unsupported speed: %d\n", phydev->speed); |
| |
| if (phydev->duplex == DUPLEX_FULL) |
| ctl |= BMCR_FULLDPLX; |
| else |
| ctl &= ~BMCR_FULLDPLX; |
| |
| res = lan9303_phy_write(ds, port, MII_BMCR, ctl); |
| |
| if (port == chip->phy_addr_base) { |
| /* Virtual Phy: Remove Turbo 200Mbit mode */ |
| lan9303_read(chip->regmap, LAN9303_VIRT_SPECIAL_CTRL, &ctl); |
| |
| ctl &= ~LAN9303_VIRT_SPECIAL_TURBO; |
| res = regmap_write(chip->regmap, |
| LAN9303_VIRT_SPECIAL_CTRL, ctl); |
| } |
| } |
| |
| static int lan9303_port_enable(struct dsa_switch *ds, int port, |
| struct phy_device *phy) |
| { |
| struct lan9303 *chip = ds->priv; |
| |
| return lan9303_enable_processing_port(chip, port); |
| } |
| |
| static void lan9303_port_disable(struct dsa_switch *ds, int port, |
| struct phy_device *phy) |
| { |
| struct lan9303 *chip = ds->priv; |
| |
| lan9303_disable_processing_port(chip, port); |
| lan9303_phy_write(ds, chip->phy_addr_base + port, MII_BMCR, BMCR_PDOWN); |
| } |
| |
| static int lan9303_port_bridge_join(struct dsa_switch *ds, int port, |
| struct net_device *br) |
| { |
| struct lan9303 *chip = ds->priv; |
| |
| dev_dbg(chip->dev, "%s(port %d)\n", __func__, port); |
| if (dsa_to_port(ds, 1)->bridge_dev == dsa_to_port(ds, 2)->bridge_dev) { |
| lan9303_bridge_ports(chip); |
| chip->is_bridged = true; /* unleash stp_state_set() */ |
| } |
| |
| return 0; |
| } |
| |
| static void lan9303_port_bridge_leave(struct dsa_switch *ds, int port, |
| struct net_device *br) |
| { |
| struct lan9303 *chip = ds->priv; |
| |
| dev_dbg(chip->dev, "%s(port %d)\n", __func__, port); |
| if (chip->is_bridged) { |
| lan9303_separate_ports(chip); |
| chip->is_bridged = false; |
| } |
| } |
| |
| static void lan9303_port_stp_state_set(struct dsa_switch *ds, int port, |
| u8 state) |
| { |
| int portmask, portstate; |
| struct lan9303 *chip = ds->priv; |
| |
| dev_dbg(chip->dev, "%s(port %d, state %d)\n", |
| __func__, port, state); |
| |
| switch (state) { |
| case BR_STATE_DISABLED: |
| portstate = LAN9303_SWE_PORT_STATE_DISABLED_PORT0; |
| break; |
| case BR_STATE_BLOCKING: |
| case BR_STATE_LISTENING: |
| portstate = LAN9303_SWE_PORT_STATE_BLOCKING_PORT0; |
| break; |
| case BR_STATE_LEARNING: |
| portstate = LAN9303_SWE_PORT_STATE_LEARNING_PORT0; |
| break; |
| case BR_STATE_FORWARDING: |
| portstate = LAN9303_SWE_PORT_STATE_FORWARDING_PORT0; |
| break; |
| default: |
| portstate = LAN9303_SWE_PORT_STATE_DISABLED_PORT0; |
| dev_err(chip->dev, "unknown stp state: port %d, state %d\n", |
| port, state); |
| } |
| |
| portmask = 0x3 << (port * 2); |
| portstate <<= (port * 2); |
| |
| chip->swe_port_state = (chip->swe_port_state & ~portmask) | portstate; |
| |
| if (chip->is_bridged) |
| lan9303_write_switch_reg(chip, LAN9303_SWE_PORT_STATE, |
| chip->swe_port_state); |
| /* else: touching SWE_PORT_STATE would break port separation */ |
| } |
| |
| static void lan9303_port_fast_age(struct dsa_switch *ds, int port) |
| { |
| struct lan9303 *chip = ds->priv; |
| struct del_port_learned_ctx del_ctx = { |
| .port = port, |
| }; |
| |
| dev_dbg(chip->dev, "%s(%d)\n", __func__, port); |
| lan9303_alr_loop(chip, alr_loop_cb_del_port_learned, &del_ctx); |
| } |
| |
| static int lan9303_port_fdb_add(struct dsa_switch *ds, int port, |
| const unsigned char *addr, u16 vid) |
| { |
| struct lan9303 *chip = ds->priv; |
| |
| dev_dbg(chip->dev, "%s(%d, %pM, %d)\n", __func__, port, addr, vid); |
| if (vid) |
| return -EOPNOTSUPP; |
| |
| return lan9303_alr_add_port(chip, addr, port, false); |
| } |
| |
| static int lan9303_port_fdb_del(struct dsa_switch *ds, int port, |
| const unsigned char *addr, u16 vid) |
| |
| { |
| struct lan9303 *chip = ds->priv; |
| |
| dev_dbg(chip->dev, "%s(%d, %pM, %d)\n", __func__, port, addr, vid); |
| if (vid) |
| return -EOPNOTSUPP; |
| lan9303_alr_del_port(chip, addr, port); |
| |
| return 0; |
| } |
| |
| static int lan9303_port_fdb_dump(struct dsa_switch *ds, int port, |
| dsa_fdb_dump_cb_t *cb, void *data) |
| { |
| struct lan9303 *chip = ds->priv; |
| struct port_fdb_dump_ctx dump_ctx = { |
| .port = port, |
| .data = data, |
| .cb = cb, |
| }; |
| |
| dev_dbg(chip->dev, "%s(%d)\n", __func__, port); |
| return lan9303_alr_loop(chip, alr_loop_cb_fdb_port_dump, &dump_ctx); |
| } |
| |
| static int lan9303_port_mdb_prepare(struct dsa_switch *ds, int port, |
| const struct switchdev_obj_port_mdb *mdb) |
| { |
| struct lan9303 *chip = ds->priv; |
| |
| dev_dbg(chip->dev, "%s(%d, %pM, %d)\n", __func__, port, mdb->addr, |
| mdb->vid); |
| if (mdb->vid) |
| return -EOPNOTSUPP; |
| if (lan9303_alr_cache_find_mac(chip, mdb->addr)) |
| return 0; |
| if (!lan9303_alr_cache_find_free(chip)) |
| return -ENOSPC; |
| |
| return 0; |
| } |
| |
| static void lan9303_port_mdb_add(struct dsa_switch *ds, int port, |
| const struct switchdev_obj_port_mdb *mdb) |
| { |
| struct lan9303 *chip = ds->priv; |
| |
| dev_dbg(chip->dev, "%s(%d, %pM, %d)\n", __func__, port, mdb->addr, |
| mdb->vid); |
| lan9303_alr_add_port(chip, mdb->addr, port, false); |
| } |
| |
| static int lan9303_port_mdb_del(struct dsa_switch *ds, int port, |
| const struct switchdev_obj_port_mdb *mdb) |
| { |
| struct lan9303 *chip = ds->priv; |
| |
| dev_dbg(chip->dev, "%s(%d, %pM, %d)\n", __func__, port, mdb->addr, |
| mdb->vid); |
| if (mdb->vid) |
| return -EOPNOTSUPP; |
| lan9303_alr_del_port(chip, mdb->addr, port); |
| |
| return 0; |
| } |
| |
| static const struct dsa_switch_ops lan9303_switch_ops = { |
| .get_tag_protocol = lan9303_get_tag_protocol, |
| .setup = lan9303_setup, |
| .get_strings = lan9303_get_strings, |
| .phy_read = lan9303_phy_read, |
| .phy_write = lan9303_phy_write, |
| .adjust_link = lan9303_adjust_link, |
| .get_ethtool_stats = lan9303_get_ethtool_stats, |
| .get_sset_count = lan9303_get_sset_count, |
| .port_enable = lan9303_port_enable, |
| .port_disable = lan9303_port_disable, |
| .port_bridge_join = lan9303_port_bridge_join, |
| .port_bridge_leave = lan9303_port_bridge_leave, |
| .port_stp_state_set = lan9303_port_stp_state_set, |
| .port_fast_age = lan9303_port_fast_age, |
| .port_fdb_add = lan9303_port_fdb_add, |
| .port_fdb_del = lan9303_port_fdb_del, |
| .port_fdb_dump = lan9303_port_fdb_dump, |
| .port_mdb_prepare = lan9303_port_mdb_prepare, |
| .port_mdb_add = lan9303_port_mdb_add, |
| .port_mdb_del = lan9303_port_mdb_del, |
| }; |
| |
| static int lan9303_register_switch(struct lan9303 *chip) |
| { |
| int base; |
| |
| chip->ds = dsa_switch_alloc(chip->dev, LAN9303_NUM_PORTS); |
| if (!chip->ds) |
| return -ENOMEM; |
| |
| chip->ds->priv = chip; |
| chip->ds->ops = &lan9303_switch_ops; |
| base = chip->phy_addr_base; |
| chip->ds->phys_mii_mask = GENMASK(LAN9303_NUM_PORTS - 1 + base, base); |
| |
| return dsa_register_switch(chip->ds); |
| } |
| |
| static int lan9303_probe_reset_gpio(struct lan9303 *chip, |
| struct device_node *np) |
| { |
| chip->reset_gpio = devm_gpiod_get_optional(chip->dev, "reset", |
| GPIOD_OUT_LOW); |
| if (IS_ERR(chip->reset_gpio)) |
| return PTR_ERR(chip->reset_gpio); |
| |
| if (!chip->reset_gpio) { |
| dev_dbg(chip->dev, "No reset GPIO defined\n"); |
| return 0; |
| } |
| |
| chip->reset_duration = 200; |
| |
| if (np) { |
| of_property_read_u32(np, "reset-duration", |
| &chip->reset_duration); |
| } else { |
| dev_dbg(chip->dev, "reset duration defaults to 200 ms\n"); |
| } |
| |
| /* A sane reset duration should not be longer than 1s */ |
| if (chip->reset_duration > 1000) |
| chip->reset_duration = 1000; |
| |
| return 0; |
| } |
| |
| int lan9303_probe(struct lan9303 *chip, struct device_node *np) |
| { |
| int ret; |
| |
| mutex_init(&chip->indirect_mutex); |
| mutex_init(&chip->alr_mutex); |
| |
| ret = lan9303_probe_reset_gpio(chip, np); |
| if (ret) |
| return ret; |
| |
| lan9303_handle_reset(chip); |
| |
| ret = lan9303_check_device(chip); |
| if (ret) |
| return ret; |
| |
| ret = lan9303_register_switch(chip); |
| if (ret) { |
| dev_dbg(chip->dev, "Failed to register switch: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(lan9303_probe); |
| |
| int lan9303_remove(struct lan9303 *chip) |
| { |
| int rc; |
| |
| rc = lan9303_disable_processing(chip); |
| if (rc != 0) |
| dev_warn(chip->dev, "shutting down failed\n"); |
| |
| dsa_unregister_switch(chip->ds); |
| |
| /* assert reset to the whole device to prevent it from doing anything */ |
| gpiod_set_value_cansleep(chip->reset_gpio, 1); |
| gpiod_unexport(chip->reset_gpio); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(lan9303_remove); |
| |
| MODULE_AUTHOR("Juergen Borleis <kernel@pengutronix.de>"); |
| MODULE_DESCRIPTION("Core driver for SMSC/Microchip LAN9303 three port ethernet switch"); |
| MODULE_LICENSE("GPL v2"); |