| /* SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) OR MIT */ |
| /* |
| * Header file for the io_uring interface. |
| * |
| * Copyright (C) 2019 Jens Axboe |
| * Copyright (C) 2019 Christoph Hellwig |
| */ |
| #ifndef LINUX_IO_URING_H |
| #define LINUX_IO_URING_H |
| |
| #include <linux/fs.h> |
| #include <linux/types.h> |
| #include <linux/time_types.h> |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* |
| * IO submission data structure (Submission Queue Entry) |
| */ |
| struct io_uring_sqe { |
| __u8 opcode; /* type of operation for this sqe */ |
| __u8 flags; /* IOSQE_ flags */ |
| __u16 ioprio; /* ioprio for the request */ |
| __s32 fd; /* file descriptor to do IO on */ |
| union { |
| __u64 off; /* offset into file */ |
| __u64 addr2; |
| struct { |
| __u32 cmd_op; |
| __u32 __pad1; |
| }; |
| }; |
| union { |
| __u64 addr; /* pointer to buffer or iovecs */ |
| __u64 splice_off_in; |
| }; |
| __u32 len; /* buffer size or number of iovecs */ |
| union { |
| __kernel_rwf_t rw_flags; |
| __u32 fsync_flags; |
| __u16 poll_events; /* compatibility */ |
| __u32 poll32_events; /* word-reversed for BE */ |
| __u32 sync_range_flags; |
| __u32 msg_flags; |
| __u32 timeout_flags; |
| __u32 accept_flags; |
| __u32 cancel_flags; |
| __u32 open_flags; |
| __u32 statx_flags; |
| __u32 fadvise_advice; |
| __u32 splice_flags; |
| __u32 rename_flags; |
| __u32 unlink_flags; |
| __u32 hardlink_flags; |
| __u32 xattr_flags; |
| __u32 msg_ring_flags; |
| __u32 uring_cmd_flags; |
| }; |
| __u64 user_data; /* data to be passed back at completion time */ |
| /* pack this to avoid bogus arm OABI complaints */ |
| union { |
| /* index into fixed buffers, if used */ |
| __u16 buf_index; |
| /* for grouped buffer selection */ |
| __u16 buf_group; |
| } __attribute__((packed)); |
| /* personality to use, if used */ |
| __u16 personality; |
| union { |
| __s32 splice_fd_in; |
| __u32 file_index; |
| struct { |
| __u16 addr_len; |
| __u16 __pad3[1]; |
| }; |
| }; |
| union { |
| struct { |
| __u64 addr3; |
| __u64 __pad2[1]; |
| }; |
| /* |
| * If the ring is initialized with IORING_SETUP_SQE128, then |
| * this field is used for 80 bytes of arbitrary command data |
| */ |
| __u8 cmd[0]; |
| }; |
| }; |
| |
| /* |
| * If sqe->file_index is set to this for opcodes that instantiate a new |
| * direct descriptor (like openat/openat2/accept), then io_uring will allocate |
| * an available direct descriptor instead of having the application pass one |
| * in. The picked direct descriptor will be returned in cqe->res, or -ENFILE |
| * if the space is full. |
| */ |
| #define IORING_FILE_INDEX_ALLOC (~0U) |
| |
| enum { |
| IOSQE_FIXED_FILE_BIT, |
| IOSQE_IO_DRAIN_BIT, |
| IOSQE_IO_LINK_BIT, |
| IOSQE_IO_HARDLINK_BIT, |
| IOSQE_ASYNC_BIT, |
| IOSQE_BUFFER_SELECT_BIT, |
| IOSQE_CQE_SKIP_SUCCESS_BIT, |
| }; |
| |
| /* |
| * sqe->flags |
| */ |
| /* use fixed fileset */ |
| #define IOSQE_FIXED_FILE (1U << IOSQE_FIXED_FILE_BIT) |
| /* issue after inflight IO */ |
| #define IOSQE_IO_DRAIN (1U << IOSQE_IO_DRAIN_BIT) |
| /* links next sqe */ |
| #define IOSQE_IO_LINK (1U << IOSQE_IO_LINK_BIT) |
| /* like LINK, but stronger */ |
| #define IOSQE_IO_HARDLINK (1U << IOSQE_IO_HARDLINK_BIT) |
| /* always go async */ |
| #define IOSQE_ASYNC (1U << IOSQE_ASYNC_BIT) |
| /* select buffer from sqe->buf_group */ |
| #define IOSQE_BUFFER_SELECT (1U << IOSQE_BUFFER_SELECT_BIT) |
| /* don't post CQE if request succeeded */ |
| #define IOSQE_CQE_SKIP_SUCCESS (1U << IOSQE_CQE_SKIP_SUCCESS_BIT) |
| |
| /* |
| * io_uring_setup() flags |
| */ |
| #define IORING_SETUP_IOPOLL (1U << 0) /* io_context is polled */ |
| #define IORING_SETUP_SQPOLL (1U << 1) /* SQ poll thread */ |
| #define IORING_SETUP_SQ_AFF (1U << 2) /* sq_thread_cpu is valid */ |
| #define IORING_SETUP_CQSIZE (1U << 3) /* app defines CQ size */ |
| #define IORING_SETUP_CLAMP (1U << 4) /* clamp SQ/CQ ring sizes */ |
| #define IORING_SETUP_ATTACH_WQ (1U << 5) /* attach to existing wq */ |
| #define IORING_SETUP_R_DISABLED (1U << 6) /* start with ring disabled */ |
| #define IORING_SETUP_SUBMIT_ALL (1U << 7) /* continue submit on error */ |
| /* |
| * Cooperative task running. When requests complete, they often require |
| * forcing the submitter to transition to the kernel to complete. If this |
| * flag is set, work will be done when the task transitions anyway, rather |
| * than force an inter-processor interrupt reschedule. This avoids interrupting |
| * a task running in userspace, and saves an IPI. |
| */ |
| #define IORING_SETUP_COOP_TASKRUN (1U << 8) |
| /* |
| * If COOP_TASKRUN is set, get notified if task work is available for |
| * running and a kernel transition would be needed to run it. This sets |
| * IORING_SQ_TASKRUN in the sq ring flags. Not valid with COOP_TASKRUN. |
| */ |
| #define IORING_SETUP_TASKRUN_FLAG (1U << 9) |
| #define IORING_SETUP_SQE128 (1U << 10) /* SQEs are 128 byte */ |
| #define IORING_SETUP_CQE32 (1U << 11) /* CQEs are 32 byte */ |
| /* |
| * Only one task is allowed to submit requests |
| */ |
| #define IORING_SETUP_SINGLE_ISSUER (1U << 12) |
| |
| /* |
| * Defer running task work to get events. |
| * Rather than running bits of task work whenever the task transitions |
| * try to do it just before it is needed. |
| */ |
| #define IORING_SETUP_DEFER_TASKRUN (1U << 13) |
| |
| enum io_uring_op { |
| IORING_OP_NOP, |
| IORING_OP_READV, |
| IORING_OP_WRITEV, |
| IORING_OP_FSYNC, |
| IORING_OP_READ_FIXED, |
| IORING_OP_WRITE_FIXED, |
| IORING_OP_POLL_ADD, |
| IORING_OP_POLL_REMOVE, |
| IORING_OP_SYNC_FILE_RANGE, |
| IORING_OP_SENDMSG, |
| IORING_OP_RECVMSG, |
| IORING_OP_TIMEOUT, |
| IORING_OP_TIMEOUT_REMOVE, |
| IORING_OP_ACCEPT, |
| IORING_OP_ASYNC_CANCEL, |
| IORING_OP_LINK_TIMEOUT, |
| IORING_OP_CONNECT, |
| IORING_OP_FALLOCATE, |
| IORING_OP_OPENAT, |
| IORING_OP_CLOSE, |
| IORING_OP_FILES_UPDATE, |
| IORING_OP_STATX, |
| IORING_OP_READ, |
| IORING_OP_WRITE, |
| IORING_OP_FADVISE, |
| IORING_OP_MADVISE, |
| IORING_OP_SEND, |
| IORING_OP_RECV, |
| IORING_OP_OPENAT2, |
| IORING_OP_EPOLL_CTL, |
| IORING_OP_SPLICE, |
| IORING_OP_PROVIDE_BUFFERS, |
| IORING_OP_REMOVE_BUFFERS, |
| IORING_OP_TEE, |
| IORING_OP_SHUTDOWN, |
| IORING_OP_RENAMEAT, |
| IORING_OP_UNLINKAT, |
| IORING_OP_MKDIRAT, |
| IORING_OP_SYMLINKAT, |
| IORING_OP_LINKAT, |
| IORING_OP_MSG_RING, |
| IORING_OP_FSETXATTR, |
| IORING_OP_SETXATTR, |
| IORING_OP_FGETXATTR, |
| IORING_OP_GETXATTR, |
| IORING_OP_SOCKET, |
| IORING_OP_URING_CMD, |
| IORING_OP_SEND_ZC, |
| IORING_OP_SENDMSG_ZC, |
| |
| /* this goes last, obviously */ |
| IORING_OP_LAST, |
| }; |
| |
| /* |
| * sqe->uring_cmd_flags |
| * IORING_URING_CMD_FIXED use registered buffer; pass this flag |
| * along with setting sqe->buf_index. |
| */ |
| #define IORING_URING_CMD_FIXED (1U << 0) |
| |
| |
| /* |
| * sqe->fsync_flags |
| */ |
| #define IORING_FSYNC_DATASYNC (1U << 0) |
| |
| /* |
| * sqe->timeout_flags |
| */ |
| #define IORING_TIMEOUT_ABS (1U << 0) |
| #define IORING_TIMEOUT_UPDATE (1U << 1) |
| #define IORING_TIMEOUT_BOOTTIME (1U << 2) |
| #define IORING_TIMEOUT_REALTIME (1U << 3) |
| #define IORING_LINK_TIMEOUT_UPDATE (1U << 4) |
| #define IORING_TIMEOUT_ETIME_SUCCESS (1U << 5) |
| #define IORING_TIMEOUT_CLOCK_MASK (IORING_TIMEOUT_BOOTTIME | IORING_TIMEOUT_REALTIME) |
| #define IORING_TIMEOUT_UPDATE_MASK (IORING_TIMEOUT_UPDATE | IORING_LINK_TIMEOUT_UPDATE) |
| /* |
| * sqe->splice_flags |
| * extends splice(2) flags |
| */ |
| #define SPLICE_F_FD_IN_FIXED (1U << 31) /* the last bit of __u32 */ |
| |
| /* |
| * POLL_ADD flags. Note that since sqe->poll_events is the flag space, the |
| * command flags for POLL_ADD are stored in sqe->len. |
| * |
| * IORING_POLL_ADD_MULTI Multishot poll. Sets IORING_CQE_F_MORE if |
| * the poll handler will continue to report |
| * CQEs on behalf of the same SQE. |
| * |
| * IORING_POLL_UPDATE Update existing poll request, matching |
| * sqe->addr as the old user_data field. |
| * |
| * IORING_POLL_LEVEL Level triggered poll. |
| */ |
| #define IORING_POLL_ADD_MULTI (1U << 0) |
| #define IORING_POLL_UPDATE_EVENTS (1U << 1) |
| #define IORING_POLL_UPDATE_USER_DATA (1U << 2) |
| #define IORING_POLL_ADD_LEVEL (1U << 3) |
| |
| /* |
| * ASYNC_CANCEL flags. |
| * |
| * IORING_ASYNC_CANCEL_ALL Cancel all requests that match the given key |
| * IORING_ASYNC_CANCEL_FD Key off 'fd' for cancelation rather than the |
| * request 'user_data' |
| * IORING_ASYNC_CANCEL_ANY Match any request |
| * IORING_ASYNC_CANCEL_FD_FIXED 'fd' passed in is a fixed descriptor |
| */ |
| #define IORING_ASYNC_CANCEL_ALL (1U << 0) |
| #define IORING_ASYNC_CANCEL_FD (1U << 1) |
| #define IORING_ASYNC_CANCEL_ANY (1U << 2) |
| #define IORING_ASYNC_CANCEL_FD_FIXED (1U << 3) |
| |
| /* |
| * send/sendmsg and recv/recvmsg flags (sqe->ioprio) |
| * |
| * IORING_RECVSEND_POLL_FIRST If set, instead of first attempting to send |
| * or receive and arm poll if that yields an |
| * -EAGAIN result, arm poll upfront and skip |
| * the initial transfer attempt. |
| * |
| * IORING_RECV_MULTISHOT Multishot recv. Sets IORING_CQE_F_MORE if |
| * the handler will continue to report |
| * CQEs on behalf of the same SQE. |
| * |
| * IORING_RECVSEND_FIXED_BUF Use registered buffers, the index is stored in |
| * the buf_index field. |
| * |
| * IORING_SEND_ZC_REPORT_USAGE |
| * If set, SEND[MSG]_ZC should report |
| * the zerocopy usage in cqe.res |
| * for the IORING_CQE_F_NOTIF cqe. |
| * 0 is reported if zerocopy was actually possible. |
| * IORING_NOTIF_USAGE_ZC_COPIED if data was copied |
| * (at least partially). |
| */ |
| #define IORING_RECVSEND_POLL_FIRST (1U << 0) |
| #define IORING_RECV_MULTISHOT (1U << 1) |
| #define IORING_RECVSEND_FIXED_BUF (1U << 2) |
| #define IORING_SEND_ZC_REPORT_USAGE (1U << 3) |
| |
| /* |
| * cqe.res for IORING_CQE_F_NOTIF if |
| * IORING_SEND_ZC_REPORT_USAGE was requested |
| * |
| * It should be treated as a flag, all other |
| * bits of cqe.res should be treated as reserved! |
| */ |
| #define IORING_NOTIF_USAGE_ZC_COPIED (1U << 31) |
| |
| /* |
| * accept flags stored in sqe->ioprio |
| */ |
| #define IORING_ACCEPT_MULTISHOT (1U << 0) |
| |
| /* |
| * IORING_OP_MSG_RING command types, stored in sqe->addr |
| */ |
| enum { |
| IORING_MSG_DATA, /* pass sqe->len as 'res' and off as user_data */ |
| IORING_MSG_SEND_FD, /* send a registered fd to another ring */ |
| }; |
| |
| /* |
| * IORING_OP_MSG_RING flags (sqe->msg_ring_flags) |
| * |
| * IORING_MSG_RING_CQE_SKIP Don't post a CQE to the target ring. Not |
| * applicable for IORING_MSG_DATA, obviously. |
| */ |
| #define IORING_MSG_RING_CQE_SKIP (1U << 0) |
| |
| /* |
| * IO completion data structure (Completion Queue Entry) |
| */ |
| struct io_uring_cqe { |
| __u64 user_data; /* sqe->data submission passed back */ |
| __s32 res; /* result code for this event */ |
| __u32 flags; |
| |
| /* |
| * If the ring is initialized with IORING_SETUP_CQE32, then this field |
| * contains 16-bytes of padding, doubling the size of the CQE. |
| */ |
| __u64 big_cqe[]; |
| }; |
| |
| /* |
| * cqe->flags |
| * |
| * IORING_CQE_F_BUFFER If set, the upper 16 bits are the buffer ID |
| * IORING_CQE_F_MORE If set, parent SQE will generate more CQE entries |
| * IORING_CQE_F_SOCK_NONEMPTY If set, more data to read after socket recv |
| * IORING_CQE_F_NOTIF Set for notification CQEs. Can be used to distinct |
| * them from sends. |
| */ |
| #define IORING_CQE_F_BUFFER (1U << 0) |
| #define IORING_CQE_F_MORE (1U << 1) |
| #define IORING_CQE_F_SOCK_NONEMPTY (1U << 2) |
| #define IORING_CQE_F_NOTIF (1U << 3) |
| |
| enum { |
| IORING_CQE_BUFFER_SHIFT = 16, |
| }; |
| |
| /* |
| * Magic offsets for the application to mmap the data it needs |
| */ |
| #define IORING_OFF_SQ_RING 0ULL |
| #define IORING_OFF_CQ_RING 0x8000000ULL |
| #define IORING_OFF_SQES 0x10000000ULL |
| |
| /* |
| * Filled with the offset for mmap(2) |
| */ |
| struct io_sqring_offsets { |
| __u32 head; |
| __u32 tail; |
| __u32 ring_mask; |
| __u32 ring_entries; |
| __u32 flags; |
| __u32 dropped; |
| __u32 array; |
| __u32 resv1; |
| __u64 resv2; |
| }; |
| |
| /* |
| * sq_ring->flags |
| */ |
| #define IORING_SQ_NEED_WAKEUP (1U << 0) /* needs io_uring_enter wakeup */ |
| #define IORING_SQ_CQ_OVERFLOW (1U << 1) /* CQ ring is overflown */ |
| #define IORING_SQ_TASKRUN (1U << 2) /* task should enter the kernel */ |
| |
| struct io_cqring_offsets { |
| __u32 head; |
| __u32 tail; |
| __u32 ring_mask; |
| __u32 ring_entries; |
| __u32 overflow; |
| __u32 cqes; |
| __u32 flags; |
| __u32 resv1; |
| __u64 resv2; |
| }; |
| |
| /* |
| * cq_ring->flags |
| */ |
| |
| /* disable eventfd notifications */ |
| #define IORING_CQ_EVENTFD_DISABLED (1U << 0) |
| |
| /* |
| * io_uring_enter(2) flags |
| */ |
| #define IORING_ENTER_GETEVENTS (1U << 0) |
| #define IORING_ENTER_SQ_WAKEUP (1U << 1) |
| #define IORING_ENTER_SQ_WAIT (1U << 2) |
| #define IORING_ENTER_EXT_ARG (1U << 3) |
| #define IORING_ENTER_REGISTERED_RING (1U << 4) |
| |
| /* |
| * Passed in for io_uring_setup(2). Copied back with updated info on success |
| */ |
| struct io_uring_params { |
| __u32 sq_entries; |
| __u32 cq_entries; |
| __u32 flags; |
| __u32 sq_thread_cpu; |
| __u32 sq_thread_idle; |
| __u32 features; |
| __u32 wq_fd; |
| __u32 resv[3]; |
| struct io_sqring_offsets sq_off; |
| struct io_cqring_offsets cq_off; |
| }; |
| |
| /* |
| * io_uring_params->features flags |
| */ |
| #define IORING_FEAT_SINGLE_MMAP (1U << 0) |
| #define IORING_FEAT_NODROP (1U << 1) |
| #define IORING_FEAT_SUBMIT_STABLE (1U << 2) |
| #define IORING_FEAT_RW_CUR_POS (1U << 3) |
| #define IORING_FEAT_CUR_PERSONALITY (1U << 4) |
| #define IORING_FEAT_FAST_POLL (1U << 5) |
| #define IORING_FEAT_POLL_32BITS (1U << 6) |
| #define IORING_FEAT_SQPOLL_NONFIXED (1U << 7) |
| #define IORING_FEAT_EXT_ARG (1U << 8) |
| #define IORING_FEAT_NATIVE_WORKERS (1U << 9) |
| #define IORING_FEAT_RSRC_TAGS (1U << 10) |
| #define IORING_FEAT_CQE_SKIP (1U << 11) |
| #define IORING_FEAT_LINKED_FILE (1U << 12) |
| |
| /* |
| * io_uring_register(2) opcodes and arguments |
| */ |
| enum { |
| IORING_REGISTER_BUFFERS = 0, |
| IORING_UNREGISTER_BUFFERS = 1, |
| IORING_REGISTER_FILES = 2, |
| IORING_UNREGISTER_FILES = 3, |
| IORING_REGISTER_EVENTFD = 4, |
| IORING_UNREGISTER_EVENTFD = 5, |
| IORING_REGISTER_FILES_UPDATE = 6, |
| IORING_REGISTER_EVENTFD_ASYNC = 7, |
| IORING_REGISTER_PROBE = 8, |
| IORING_REGISTER_PERSONALITY = 9, |
| IORING_UNREGISTER_PERSONALITY = 10, |
| IORING_REGISTER_RESTRICTIONS = 11, |
| IORING_REGISTER_ENABLE_RINGS = 12, |
| |
| /* extended with tagging */ |
| IORING_REGISTER_FILES2 = 13, |
| IORING_REGISTER_FILES_UPDATE2 = 14, |
| IORING_REGISTER_BUFFERS2 = 15, |
| IORING_REGISTER_BUFFERS_UPDATE = 16, |
| |
| /* set/clear io-wq thread affinities */ |
| IORING_REGISTER_IOWQ_AFF = 17, |
| IORING_UNREGISTER_IOWQ_AFF = 18, |
| |
| /* set/get max number of io-wq workers */ |
| IORING_REGISTER_IOWQ_MAX_WORKERS = 19, |
| |
| /* register/unregister io_uring fd with the ring */ |
| IORING_REGISTER_RING_FDS = 20, |
| IORING_UNREGISTER_RING_FDS = 21, |
| |
| /* register ring based provide buffer group */ |
| IORING_REGISTER_PBUF_RING = 22, |
| IORING_UNREGISTER_PBUF_RING = 23, |
| |
| /* sync cancelation API */ |
| IORING_REGISTER_SYNC_CANCEL = 24, |
| |
| /* register a range of fixed file slots for automatic slot allocation */ |
| IORING_REGISTER_FILE_ALLOC_RANGE = 25, |
| |
| /* this goes last */ |
| IORING_REGISTER_LAST |
| }; |
| |
| /* io-wq worker categories */ |
| enum { |
| IO_WQ_BOUND, |
| IO_WQ_UNBOUND, |
| }; |
| |
| /* deprecated, see struct io_uring_rsrc_update */ |
| struct io_uring_files_update { |
| __u32 offset; |
| __u32 resv; |
| __aligned_u64 /* __s32 * */ fds; |
| }; |
| |
| /* |
| * Register a fully sparse file space, rather than pass in an array of all |
| * -1 file descriptors. |
| */ |
| #define IORING_RSRC_REGISTER_SPARSE (1U << 0) |
| |
| struct io_uring_rsrc_register { |
| __u32 nr; |
| __u32 flags; |
| __u64 resv2; |
| __aligned_u64 data; |
| __aligned_u64 tags; |
| }; |
| |
| struct io_uring_rsrc_update { |
| __u32 offset; |
| __u32 resv; |
| __aligned_u64 data; |
| }; |
| |
| struct io_uring_rsrc_update2 { |
| __u32 offset; |
| __u32 resv; |
| __aligned_u64 data; |
| __aligned_u64 tags; |
| __u32 nr; |
| __u32 resv2; |
| }; |
| |
| struct io_uring_notification_slot { |
| __u64 tag; |
| __u64 resv[3]; |
| }; |
| |
| struct io_uring_notification_register { |
| __u32 nr_slots; |
| __u32 resv; |
| __u64 resv2; |
| __u64 data; |
| __u64 resv3; |
| }; |
| |
| /* Skip updating fd indexes set to this value in the fd table */ |
| #define IORING_REGISTER_FILES_SKIP (-2) |
| |
| #define IO_URING_OP_SUPPORTED (1U << 0) |
| |
| struct io_uring_probe_op { |
| __u8 op; |
| __u8 resv; |
| __u16 flags; /* IO_URING_OP_* flags */ |
| __u32 resv2; |
| }; |
| |
| struct io_uring_probe { |
| __u8 last_op; /* last opcode supported */ |
| __u8 ops_len; /* length of ops[] array below */ |
| __u16 resv; |
| __u32 resv2[3]; |
| struct io_uring_probe_op ops[]; |
| }; |
| |
| struct io_uring_restriction { |
| __u16 opcode; |
| union { |
| __u8 register_op; /* IORING_RESTRICTION_REGISTER_OP */ |
| __u8 sqe_op; /* IORING_RESTRICTION_SQE_OP */ |
| __u8 sqe_flags; /* IORING_RESTRICTION_SQE_FLAGS_* */ |
| }; |
| __u8 resv; |
| __u32 resv2[3]; |
| }; |
| |
| struct io_uring_buf { |
| __u64 addr; |
| __u32 len; |
| __u16 bid; |
| __u16 resv; |
| }; |
| |
| struct io_uring_buf_ring { |
| union { |
| /* |
| * To avoid spilling into more pages than we need to, the |
| * ring tail is overlaid with the io_uring_buf->resv field. |
| */ |
| struct { |
| __u64 resv1; |
| __u32 resv2; |
| __u16 resv3; |
| __u16 tail; |
| }; |
| __DECLARE_FLEX_ARRAY(struct io_uring_buf, bufs); |
| }; |
| }; |
| |
| /* argument for IORING_(UN)REGISTER_PBUF_RING */ |
| struct io_uring_buf_reg { |
| __u64 ring_addr; |
| __u32 ring_entries; |
| __u16 bgid; |
| __u16 pad; |
| __u64 resv[3]; |
| }; |
| |
| /* |
| * io_uring_restriction->opcode values |
| */ |
| enum { |
| /* Allow an io_uring_register(2) opcode */ |
| IORING_RESTRICTION_REGISTER_OP = 0, |
| |
| /* Allow an sqe opcode */ |
| IORING_RESTRICTION_SQE_OP = 1, |
| |
| /* Allow sqe flags */ |
| IORING_RESTRICTION_SQE_FLAGS_ALLOWED = 2, |
| |
| /* Require sqe flags (these flags must be set on each submission) */ |
| IORING_RESTRICTION_SQE_FLAGS_REQUIRED = 3, |
| |
| IORING_RESTRICTION_LAST |
| }; |
| |
| struct io_uring_getevents_arg { |
| __u64 sigmask; |
| __u32 sigmask_sz; |
| __u32 pad; |
| __u64 ts; |
| }; |
| |
| /* |
| * Argument for IORING_REGISTER_SYNC_CANCEL |
| */ |
| struct io_uring_sync_cancel_reg { |
| __u64 addr; |
| __s32 fd; |
| __u32 flags; |
| struct __kernel_timespec timeout; |
| __u64 pad[4]; |
| }; |
| |
| /* |
| * Argument for IORING_REGISTER_FILE_ALLOC_RANGE |
| * The range is specified as [off, off + len) |
| */ |
| struct io_uring_file_index_range { |
| __u32 off; |
| __u32 len; |
| __u64 resv; |
| }; |
| |
| struct io_uring_recvmsg_out { |
| __u32 namelen; |
| __u32 controllen; |
| __u32 payloadlen; |
| __u32 flags; |
| }; |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif |