| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| /* |
| * Boot code and exception vectors for Book3E processors |
| * |
| * Copyright (C) 2007 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp. |
| */ |
| |
| #include <linux/threads.h> |
| #include <asm/reg.h> |
| #include <asm/page.h> |
| #include <asm/ppc_asm.h> |
| #include <asm/asm-offsets.h> |
| #include <asm/cputable.h> |
| #include <asm/setup.h> |
| #include <asm/thread_info.h> |
| #include <asm/reg_a2.h> |
| #include <asm/exception-64e.h> |
| #include <asm/bug.h> |
| #include <asm/irqflags.h> |
| #include <asm/ptrace.h> |
| #include <asm/ppc-opcode.h> |
| #include <asm/mmu.h> |
| #include <asm/hw_irq.h> |
| #include <asm/kvm_asm.h> |
| #include <asm/kvm_booke_hv_asm.h> |
| #include <asm/feature-fixups.h> |
| #include <asm/context_tracking.h> |
| |
| /* 64e interrupt returns always use SRR registers */ |
| #define fast_interrupt_return fast_interrupt_return_srr |
| #define interrupt_return interrupt_return_srr |
| |
| /* XXX This will ultimately add space for a special exception save |
| * structure used to save things like SRR0/SRR1, SPRGs, MAS, etc... |
| * when taking special interrupts. For now we don't support that, |
| * special interrupts from within a non-standard level will probably |
| * blow you up |
| */ |
| #define SPECIAL_EXC_SRR0 0 |
| #define SPECIAL_EXC_SRR1 1 |
| #define SPECIAL_EXC_SPRG_GEN 2 |
| #define SPECIAL_EXC_SPRG_TLB 3 |
| #define SPECIAL_EXC_MAS0 4 |
| #define SPECIAL_EXC_MAS1 5 |
| #define SPECIAL_EXC_MAS2 6 |
| #define SPECIAL_EXC_MAS3 7 |
| #define SPECIAL_EXC_MAS6 8 |
| #define SPECIAL_EXC_MAS7 9 |
| #define SPECIAL_EXC_MAS5 10 /* E.HV only */ |
| #define SPECIAL_EXC_MAS8 11 /* E.HV only */ |
| #define SPECIAL_EXC_IRQHAPPENED 12 |
| #define SPECIAL_EXC_DEAR 13 |
| #define SPECIAL_EXC_ESR 14 |
| #define SPECIAL_EXC_SOFTE 15 |
| #define SPECIAL_EXC_CSRR0 16 |
| #define SPECIAL_EXC_CSRR1 17 |
| /* must be even to keep 16-byte stack alignment */ |
| #define SPECIAL_EXC_END 18 |
| |
| #define SPECIAL_EXC_FRAME_SIZE (INT_FRAME_SIZE + SPECIAL_EXC_END * 8) |
| #define SPECIAL_EXC_FRAME_OFFS (INT_FRAME_SIZE - 288) |
| |
| #define SPECIAL_EXC_STORE(reg, name) \ |
| std reg, (SPECIAL_EXC_##name * 8 + SPECIAL_EXC_FRAME_OFFS)(r1) |
| |
| #define SPECIAL_EXC_LOAD(reg, name) \ |
| ld reg, (SPECIAL_EXC_##name * 8 + SPECIAL_EXC_FRAME_OFFS)(r1) |
| |
| special_reg_save: |
| /* |
| * We only need (or have stack space) to save this stuff if |
| * we interrupted the kernel. |
| */ |
| ld r3,_MSR(r1) |
| andi. r3,r3,MSR_PR |
| bnelr |
| |
| /* |
| * Advance to the next TLB exception frame for handler |
| * types that don't do it automatically. |
| */ |
| LOAD_REG_ADDR(r11,extlb_level_exc) |
| lwz r12,0(r11) |
| mfspr r10,SPRN_SPRG_TLB_EXFRAME |
| add r10,r10,r12 |
| mtspr SPRN_SPRG_TLB_EXFRAME,r10 |
| |
| /* |
| * Save registers needed to allow nesting of certain exceptions |
| * (such as TLB misses) inside special exception levels |
| */ |
| mfspr r10,SPRN_SRR0 |
| SPECIAL_EXC_STORE(r10,SRR0) |
| mfspr r10,SPRN_SRR1 |
| SPECIAL_EXC_STORE(r10,SRR1) |
| mfspr r10,SPRN_SPRG_GEN_SCRATCH |
| SPECIAL_EXC_STORE(r10,SPRG_GEN) |
| mfspr r10,SPRN_SPRG_TLB_SCRATCH |
| SPECIAL_EXC_STORE(r10,SPRG_TLB) |
| mfspr r10,SPRN_MAS0 |
| SPECIAL_EXC_STORE(r10,MAS0) |
| mfspr r10,SPRN_MAS1 |
| SPECIAL_EXC_STORE(r10,MAS1) |
| mfspr r10,SPRN_MAS2 |
| SPECIAL_EXC_STORE(r10,MAS2) |
| mfspr r10,SPRN_MAS3 |
| SPECIAL_EXC_STORE(r10,MAS3) |
| mfspr r10,SPRN_MAS6 |
| SPECIAL_EXC_STORE(r10,MAS6) |
| mfspr r10,SPRN_MAS7 |
| SPECIAL_EXC_STORE(r10,MAS7) |
| BEGIN_FTR_SECTION |
| mfspr r10,SPRN_MAS5 |
| SPECIAL_EXC_STORE(r10,MAS5) |
| mfspr r10,SPRN_MAS8 |
| SPECIAL_EXC_STORE(r10,MAS8) |
| |
| /* MAS5/8 could have inappropriate values if we interrupted KVM code */ |
| li r10,0 |
| mtspr SPRN_MAS5,r10 |
| mtspr SPRN_MAS8,r10 |
| END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV) |
| mfspr r10,SPRN_DEAR |
| SPECIAL_EXC_STORE(r10,DEAR) |
| mfspr r10,SPRN_ESR |
| SPECIAL_EXC_STORE(r10,ESR) |
| |
| ld r10,_NIP(r1) |
| SPECIAL_EXC_STORE(r10,CSRR0) |
| ld r10,_MSR(r1) |
| SPECIAL_EXC_STORE(r10,CSRR1) |
| |
| blr |
| |
| ret_from_level_except: |
| ld r3,_MSR(r1) |
| andi. r3,r3,MSR_PR |
| beq 1f |
| REST_NVGPRS(r1) |
| b interrupt_return |
| 1: |
| |
| LOAD_REG_ADDR(r11,extlb_level_exc) |
| lwz r12,0(r11) |
| mfspr r10,SPRN_SPRG_TLB_EXFRAME |
| sub r10,r10,r12 |
| mtspr SPRN_SPRG_TLB_EXFRAME,r10 |
| |
| /* |
| * It's possible that the special level exception interrupted a |
| * TLB miss handler, and inserted the same entry that the |
| * interrupted handler was about to insert. On CPUs without TLB |
| * write conditional, this can result in a duplicate TLB entry. |
| * Wipe all non-bolted entries to be safe. |
| * |
| * Note that this doesn't protect against any TLB misses |
| * we may take accessing the stack from here to the end of |
| * the special level exception. It's not clear how we can |
| * reasonably protect against that, but only CPUs with |
| * neither TLB write conditional nor bolted kernel memory |
| * are affected. Do any such CPUs even exist? |
| */ |
| PPC_TLBILX_ALL(0,R0) |
| |
| REST_NVGPRS(r1) |
| |
| SPECIAL_EXC_LOAD(r10,SRR0) |
| mtspr SPRN_SRR0,r10 |
| SPECIAL_EXC_LOAD(r10,SRR1) |
| mtspr SPRN_SRR1,r10 |
| SPECIAL_EXC_LOAD(r10,SPRG_GEN) |
| mtspr SPRN_SPRG_GEN_SCRATCH,r10 |
| SPECIAL_EXC_LOAD(r10,SPRG_TLB) |
| mtspr SPRN_SPRG_TLB_SCRATCH,r10 |
| SPECIAL_EXC_LOAD(r10,MAS0) |
| mtspr SPRN_MAS0,r10 |
| SPECIAL_EXC_LOAD(r10,MAS1) |
| mtspr SPRN_MAS1,r10 |
| SPECIAL_EXC_LOAD(r10,MAS2) |
| mtspr SPRN_MAS2,r10 |
| SPECIAL_EXC_LOAD(r10,MAS3) |
| mtspr SPRN_MAS3,r10 |
| SPECIAL_EXC_LOAD(r10,MAS6) |
| mtspr SPRN_MAS6,r10 |
| SPECIAL_EXC_LOAD(r10,MAS7) |
| mtspr SPRN_MAS7,r10 |
| BEGIN_FTR_SECTION |
| SPECIAL_EXC_LOAD(r10,MAS5) |
| mtspr SPRN_MAS5,r10 |
| SPECIAL_EXC_LOAD(r10,MAS8) |
| mtspr SPRN_MAS8,r10 |
| END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV) |
| |
| SPECIAL_EXC_LOAD(r10,DEAR) |
| mtspr SPRN_DEAR,r10 |
| SPECIAL_EXC_LOAD(r10,ESR) |
| mtspr SPRN_ESR,r10 |
| |
| stdcx. r0,0,r1 /* to clear the reservation */ |
| |
| REST_GPRS(2, 9, r1) |
| |
| ld r10,_CTR(r1) |
| ld r11,_XER(r1) |
| mtctr r10 |
| mtxer r11 |
| |
| blr |
| |
| .macro ret_from_level srr0 srr1 paca_ex scratch |
| bl ret_from_level_except |
| |
| ld r10,_LINK(r1) |
| ld r11,_CCR(r1) |
| ld r0,GPR13(r1) |
| mtlr r10 |
| mtcr r11 |
| |
| REST_GPRS(10, 12, r1) |
| mtspr \scratch,r0 |
| |
| std r10,\paca_ex+EX_R10(r13); |
| std r11,\paca_ex+EX_R11(r13); |
| ld r10,_NIP(r1) |
| ld r11,_MSR(r1) |
| REST_GPR(0, r1) |
| REST_GPR(1, r1) |
| mtspr \srr0,r10 |
| mtspr \srr1,r11 |
| ld r10,\paca_ex+EX_R10(r13) |
| ld r11,\paca_ex+EX_R11(r13) |
| mfspr r13,\scratch |
| .endm |
| |
| ret_from_crit_except: |
| ret_from_level SPRN_CSRR0 SPRN_CSRR1 PACA_EXCRIT SPRN_SPRG_CRIT_SCRATCH |
| rfci |
| |
| ret_from_mc_except: |
| ret_from_level SPRN_MCSRR0 SPRN_MCSRR1 PACA_EXMC SPRN_SPRG_MC_SCRATCH |
| rfmci |
| |
| /* Exception prolog code for all exceptions */ |
| #define EXCEPTION_PROLOG(n, intnum, type, addition) \ |
| mtspr SPRN_SPRG_##type##_SCRATCH,r13; /* get spare registers */ \ |
| mfspr r13,SPRN_SPRG_PACA; /* get PACA */ \ |
| std r10,PACA_EX##type+EX_R10(r13); \ |
| std r11,PACA_EX##type+EX_R11(r13); \ |
| mfcr r10; /* save CR */ \ |
| mfspr r11,SPRN_##type##_SRR1;/* what are we coming from */ \ |
| DO_KVM intnum,SPRN_##type##_SRR1; /* KVM hook */ \ |
| stw r10,PACA_EX##type+EX_CR(r13); /* save old CR in the PACA */ \ |
| addition; /* additional code for that exc. */ \ |
| std r1,PACA_EX##type+EX_R1(r13); /* save old r1 in the PACA */ \ |
| type##_SET_KSTACK; /* get special stack if necessary */\ |
| andi. r10,r11,MSR_PR; /* save stack pointer */ \ |
| beq 1f; /* branch around if supervisor */ \ |
| ld r1,PACAKSAVE(r13); /* get kernel stack coming from usr */\ |
| 1: type##_BTB_FLUSH \ |
| cmpdi cr1,r1,0; /* check if SP makes sense */ \ |
| bge- cr1,exc_##n##_bad_stack;/* bad stack (TODO: out of line) */ \ |
| mfspr r10,SPRN_##type##_SRR0; /* read SRR0 before touching stack */ |
| |
| /* Exception type-specific macros */ |
| #define GEN_SET_KSTACK \ |
| subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ |
| #define SPRN_GEN_SRR0 SPRN_SRR0 |
| #define SPRN_GEN_SRR1 SPRN_SRR1 |
| |
| #define GDBELL_SET_KSTACK GEN_SET_KSTACK |
| #define SPRN_GDBELL_SRR0 SPRN_GSRR0 |
| #define SPRN_GDBELL_SRR1 SPRN_GSRR1 |
| |
| #define CRIT_SET_KSTACK \ |
| ld r1,PACA_CRIT_STACK(r13); \ |
| subi r1,r1,SPECIAL_EXC_FRAME_SIZE |
| #define SPRN_CRIT_SRR0 SPRN_CSRR0 |
| #define SPRN_CRIT_SRR1 SPRN_CSRR1 |
| |
| #define DBG_SET_KSTACK \ |
| ld r1,PACA_DBG_STACK(r13); \ |
| subi r1,r1,SPECIAL_EXC_FRAME_SIZE |
| #define SPRN_DBG_SRR0 SPRN_DSRR0 |
| #define SPRN_DBG_SRR1 SPRN_DSRR1 |
| |
| #define MC_SET_KSTACK \ |
| ld r1,PACA_MC_STACK(r13); \ |
| subi r1,r1,SPECIAL_EXC_FRAME_SIZE |
| #define SPRN_MC_SRR0 SPRN_MCSRR0 |
| #define SPRN_MC_SRR1 SPRN_MCSRR1 |
| |
| #define GEN_BTB_FLUSH \ |
| START_BTB_FLUSH_SECTION \ |
| beq 1f; \ |
| BTB_FLUSH(r10) \ |
| 1: \ |
| END_BTB_FLUSH_SECTION |
| |
| #define CRIT_BTB_FLUSH \ |
| START_BTB_FLUSH_SECTION \ |
| BTB_FLUSH(r10) \ |
| END_BTB_FLUSH_SECTION |
| |
| #define DBG_BTB_FLUSH CRIT_BTB_FLUSH |
| #define MC_BTB_FLUSH CRIT_BTB_FLUSH |
| #define GDBELL_BTB_FLUSH GEN_BTB_FLUSH |
| |
| #define NORMAL_EXCEPTION_PROLOG(n, intnum, addition) \ |
| EXCEPTION_PROLOG(n, intnum, GEN, addition##_GEN(n)) |
| |
| #define CRIT_EXCEPTION_PROLOG(n, intnum, addition) \ |
| EXCEPTION_PROLOG(n, intnum, CRIT, addition##_CRIT(n)) |
| |
| #define DBG_EXCEPTION_PROLOG(n, intnum, addition) \ |
| EXCEPTION_PROLOG(n, intnum, DBG, addition##_DBG(n)) |
| |
| #define MC_EXCEPTION_PROLOG(n, intnum, addition) \ |
| EXCEPTION_PROLOG(n, intnum, MC, addition##_MC(n)) |
| |
| #define GDBELL_EXCEPTION_PROLOG(n, intnum, addition) \ |
| EXCEPTION_PROLOG(n, intnum, GDBELL, addition##_GDBELL(n)) |
| |
| /* Variants of the "addition" argument for the prolog |
| */ |
| #define PROLOG_ADDITION_NONE_GEN(n) |
| #define PROLOG_ADDITION_NONE_GDBELL(n) |
| #define PROLOG_ADDITION_NONE_CRIT(n) |
| #define PROLOG_ADDITION_NONE_DBG(n) |
| #define PROLOG_ADDITION_NONE_MC(n) |
| |
| #define PROLOG_ADDITION_MASKABLE_GEN(n) \ |
| lbz r10,PACAIRQSOFTMASK(r13); /* are irqs soft-masked? */ \ |
| andi. r10,r10,IRQS_DISABLED; /* yes -> go out of line */ \ |
| bne masked_interrupt_book3e_##n |
| |
| /* |
| * Additional regs must be re-loaded from paca before EXCEPTION_COMMON* is |
| * called, because that does SAVE_NVGPRS which must see the original register |
| * values, otherwise the scratch values might be restored when exiting the |
| * interrupt. |
| */ |
| #define PROLOG_ADDITION_2REGS_GEN(n) \ |
| std r14,PACA_EXGEN+EX_R14(r13); \ |
| std r15,PACA_EXGEN+EX_R15(r13) |
| |
| #define PROLOG_ADDITION_1REG_GEN(n) \ |
| std r14,PACA_EXGEN+EX_R14(r13); |
| |
| #define PROLOG_ADDITION_2REGS_CRIT(n) \ |
| std r14,PACA_EXCRIT+EX_R14(r13); \ |
| std r15,PACA_EXCRIT+EX_R15(r13) |
| |
| #define PROLOG_ADDITION_2REGS_DBG(n) \ |
| std r14,PACA_EXDBG+EX_R14(r13); \ |
| std r15,PACA_EXDBG+EX_R15(r13) |
| |
| #define PROLOG_ADDITION_2REGS_MC(n) \ |
| std r14,PACA_EXMC+EX_R14(r13); \ |
| std r15,PACA_EXMC+EX_R15(r13) |
| |
| |
| /* Core exception code for all exceptions except TLB misses. */ |
| #define EXCEPTION_COMMON_LVL(n, scratch, excf) \ |
| exc_##n##_common: \ |
| SAVE_GPR(0, r1); /* save r0 in stackframe */ \ |
| SAVE_GPRS(2, 9, r1); /* save r2 - r9 in stackframe */ \ |
| std r10,_NIP(r1); /* save SRR0 to stackframe */ \ |
| std r11,_MSR(r1); /* save SRR1 to stackframe */ \ |
| beq 2f; /* if from kernel mode */ \ |
| 2: ld r3,excf+EX_R10(r13); /* get back r10 */ \ |
| ld r4,excf+EX_R11(r13); /* get back r11 */ \ |
| mfspr r5,scratch; /* get back r13 */ \ |
| SAVE_GPR(12, r1); /* save r12 in stackframe */ \ |
| LOAD_PACA_TOC(); /* get kernel TOC into r2 */ \ |
| mflr r6; /* save LR in stackframe */ \ |
| mfctr r7; /* save CTR in stackframe */ \ |
| mfspr r8,SPRN_XER; /* save XER in stackframe */ \ |
| ld r9,excf+EX_R1(r13); /* load orig r1 back from PACA */ \ |
| lwz r10,excf+EX_CR(r13); /* load orig CR back from PACA */ \ |
| lbz r11,PACAIRQSOFTMASK(r13); /* get current IRQ softe */ \ |
| LOAD_REG_IMMEDIATE(r12, STACK_FRAME_REGS_MARKER); \ |
| ZEROIZE_GPR(0); \ |
| std r3,GPR10(r1); /* save r10 to stackframe */ \ |
| std r4,GPR11(r1); /* save r11 to stackframe */ \ |
| std r5,GPR13(r1); /* save it to stackframe */ \ |
| std r6,_LINK(r1); \ |
| std r7,_CTR(r1); \ |
| std r8,_XER(r1); \ |
| li r3,(n); /* regs.trap vector */ \ |
| std r9,0(r1); /* store stack frame back link */ \ |
| std r10,_CCR(r1); /* store orig CR in stackframe */ \ |
| std r9,GPR1(r1); /* store stack frame back link */ \ |
| std r11,SOFTE(r1); /* and save it to stackframe */ \ |
| std r12,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ \ |
| std r3,_TRAP(r1); /* set trap number */ \ |
| std r0,RESULT(r1); /* clear regs->result */ \ |
| SAVE_NVGPRS(r1); |
| |
| #define EXCEPTION_COMMON(n) \ |
| EXCEPTION_COMMON_LVL(n, SPRN_SPRG_GEN_SCRATCH, PACA_EXGEN) |
| #define EXCEPTION_COMMON_CRIT(n) \ |
| EXCEPTION_COMMON_LVL(n, SPRN_SPRG_CRIT_SCRATCH, PACA_EXCRIT) |
| #define EXCEPTION_COMMON_MC(n) \ |
| EXCEPTION_COMMON_LVL(n, SPRN_SPRG_MC_SCRATCH, PACA_EXMC) |
| #define EXCEPTION_COMMON_DBG(n) \ |
| EXCEPTION_COMMON_LVL(n, SPRN_SPRG_DBG_SCRATCH, PACA_EXDBG) |
| |
| /* XXX FIXME: Restore r14/r15 when necessary */ |
| #define BAD_STACK_TRAMPOLINE(n) \ |
| exc_##n##_bad_stack: \ |
| li r1,(n); /* get exception number */ \ |
| sth r1,PACA_TRAP_SAVE(r13); /* store trap */ \ |
| b bad_stack_book3e; /* bad stack error */ |
| |
| /* WARNING: If you change the layout of this stub, make sure you check |
| * the debug exception handler which handles single stepping |
| * into exceptions from userspace, and the MM code in |
| * arch/powerpc/mm/tlb_nohash.c which patches the branch here |
| * and would need to be updated if that branch is moved |
| */ |
| #define EXCEPTION_STUB(loc, label) \ |
| . = interrupt_base_book3e + loc; \ |
| nop; /* To make debug interrupts happy */ \ |
| b exc_##label##_book3e; |
| |
| #define ACK_NONE(r) |
| #define ACK_DEC(r) \ |
| lis r,TSR_DIS@h; \ |
| mtspr SPRN_TSR,r |
| #define ACK_FIT(r) \ |
| lis r,TSR_FIS@h; \ |
| mtspr SPRN_TSR,r |
| |
| /* Used by asynchronous interrupt that may happen in the idle loop. |
| * |
| * This check if the thread was in the idle loop, and if yes, returns |
| * to the caller rather than the PC. This is to avoid a race if |
| * interrupts happen before the wait instruction. |
| */ |
| #define CHECK_NAPPING() \ |
| ld r11, PACA_THREAD_INFO(r13); \ |
| ld r10,TI_LOCAL_FLAGS(r11); \ |
| andi. r9,r10,_TLF_NAPPING; \ |
| beq+ 1f; \ |
| ld r8,_LINK(r1); \ |
| rlwinm r7,r10,0,~_TLF_NAPPING; \ |
| std r8,_NIP(r1); \ |
| std r7,TI_LOCAL_FLAGS(r11); \ |
| 1: |
| |
| |
| #define MASKABLE_EXCEPTION(trapnum, intnum, label, hdlr, ack) \ |
| START_EXCEPTION(label); \ |
| NORMAL_EXCEPTION_PROLOG(trapnum, intnum, PROLOG_ADDITION_MASKABLE)\ |
| EXCEPTION_COMMON(trapnum) \ |
| ack(r8); \ |
| CHECK_NAPPING(); \ |
| addi r3,r1,STACK_FRAME_OVERHEAD; \ |
| bl hdlr; \ |
| b interrupt_return |
| |
| /* |
| * And here we have the exception vectors ! |
| */ |
| |
| .text |
| .balign 0x1000 |
| .globl interrupt_base_book3e |
| interrupt_base_book3e: /* fake trap */ |
| EXCEPTION_STUB(0x000, machine_check) |
| EXCEPTION_STUB(0x020, critical_input) /* 0x0100 */ |
| EXCEPTION_STUB(0x040, debug_crit) /* 0x0d00 */ |
| EXCEPTION_STUB(0x060, data_storage) /* 0x0300 */ |
| EXCEPTION_STUB(0x080, instruction_storage) /* 0x0400 */ |
| EXCEPTION_STUB(0x0a0, external_input) /* 0x0500 */ |
| EXCEPTION_STUB(0x0c0, alignment) /* 0x0600 */ |
| EXCEPTION_STUB(0x0e0, program) /* 0x0700 */ |
| EXCEPTION_STUB(0x100, fp_unavailable) /* 0x0800 */ |
| EXCEPTION_STUB(0x120, system_call) /* 0x0c00 */ |
| EXCEPTION_STUB(0x140, ap_unavailable) /* 0x0f20 */ |
| EXCEPTION_STUB(0x160, decrementer) /* 0x0900 */ |
| EXCEPTION_STUB(0x180, fixed_interval) /* 0x0980 */ |
| EXCEPTION_STUB(0x1a0, watchdog) /* 0x09f0 */ |
| EXCEPTION_STUB(0x1c0, data_tlb_miss) |
| EXCEPTION_STUB(0x1e0, instruction_tlb_miss) |
| EXCEPTION_STUB(0x200, altivec_unavailable) |
| EXCEPTION_STUB(0x220, altivec_assist) |
| EXCEPTION_STUB(0x260, perfmon) |
| EXCEPTION_STUB(0x280, doorbell) |
| EXCEPTION_STUB(0x2a0, doorbell_crit) |
| EXCEPTION_STUB(0x2c0, guest_doorbell) |
| EXCEPTION_STUB(0x2e0, guest_doorbell_crit) |
| EXCEPTION_STUB(0x300, hypercall) |
| EXCEPTION_STUB(0x320, ehpriv) |
| EXCEPTION_STUB(0x340, lrat_error) |
| |
| .globl __end_interrupts |
| __end_interrupts: |
| |
| /* Critical Input Interrupt */ |
| START_EXCEPTION(critical_input); |
| CRIT_EXCEPTION_PROLOG(0x100, BOOKE_INTERRUPT_CRITICAL, |
| PROLOG_ADDITION_NONE) |
| EXCEPTION_COMMON_CRIT(0x100) |
| bl special_reg_save |
| CHECK_NAPPING(); |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl unknown_nmi_exception |
| b ret_from_crit_except |
| |
| /* Machine Check Interrupt */ |
| START_EXCEPTION(machine_check); |
| MC_EXCEPTION_PROLOG(0x000, BOOKE_INTERRUPT_MACHINE_CHECK, |
| PROLOG_ADDITION_NONE) |
| EXCEPTION_COMMON_MC(0x000) |
| bl special_reg_save |
| CHECK_NAPPING(); |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl machine_check_exception |
| b ret_from_mc_except |
| |
| /* Data Storage Interrupt */ |
| START_EXCEPTION(data_storage) |
| NORMAL_EXCEPTION_PROLOG(0x300, BOOKE_INTERRUPT_DATA_STORAGE, |
| PROLOG_ADDITION_2REGS) |
| mfspr r14,SPRN_DEAR |
| mfspr r15,SPRN_ESR |
| std r14,_DEAR(r1) |
| std r15,_ESR(r1) |
| ld r14,PACA_EXGEN+EX_R14(r13) |
| ld r15,PACA_EXGEN+EX_R15(r13) |
| EXCEPTION_COMMON(0x300) |
| b storage_fault_common |
| |
| /* Instruction Storage Interrupt */ |
| START_EXCEPTION(instruction_storage); |
| NORMAL_EXCEPTION_PROLOG(0x400, BOOKE_INTERRUPT_INST_STORAGE, |
| PROLOG_ADDITION_2REGS) |
| li r15,0 |
| mr r14,r10 |
| std r14,_DEAR(r1) |
| std r15,_ESR(r1) |
| ld r14,PACA_EXGEN+EX_R14(r13) |
| ld r15,PACA_EXGEN+EX_R15(r13) |
| EXCEPTION_COMMON(0x400) |
| b storage_fault_common |
| |
| /* External Input Interrupt */ |
| MASKABLE_EXCEPTION(0x500, BOOKE_INTERRUPT_EXTERNAL, |
| external_input, do_IRQ, ACK_NONE) |
| |
| /* Alignment */ |
| START_EXCEPTION(alignment); |
| NORMAL_EXCEPTION_PROLOG(0x600, BOOKE_INTERRUPT_ALIGNMENT, |
| PROLOG_ADDITION_2REGS) |
| mfspr r14,SPRN_DEAR |
| mfspr r15,SPRN_ESR |
| std r14,_DEAR(r1) |
| std r15,_ESR(r1) |
| ld r14,PACA_EXGEN+EX_R14(r13) |
| ld r15,PACA_EXGEN+EX_R15(r13) |
| EXCEPTION_COMMON(0x600) |
| b alignment_more /* no room, go out of line */ |
| |
| /* Program Interrupt */ |
| START_EXCEPTION(program); |
| NORMAL_EXCEPTION_PROLOG(0x700, BOOKE_INTERRUPT_PROGRAM, |
| PROLOG_ADDITION_1REG) |
| mfspr r14,SPRN_ESR |
| std r14,_ESR(r1) |
| ld r14,PACA_EXGEN+EX_R14(r13) |
| EXCEPTION_COMMON(0x700) |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl program_check_exception |
| REST_NVGPRS(r1) |
| b interrupt_return |
| |
| /* Floating Point Unavailable Interrupt */ |
| START_EXCEPTION(fp_unavailable); |
| NORMAL_EXCEPTION_PROLOG(0x800, BOOKE_INTERRUPT_FP_UNAVAIL, |
| PROLOG_ADDITION_NONE) |
| /* we can probably do a shorter exception entry for that one... */ |
| EXCEPTION_COMMON(0x800) |
| ld r12,_MSR(r1) |
| andi. r0,r12,MSR_PR; |
| beq- 1f |
| bl load_up_fpu |
| b fast_interrupt_return |
| 1: addi r3,r1,STACK_FRAME_OVERHEAD |
| bl kernel_fp_unavailable_exception |
| b interrupt_return |
| |
| /* Altivec Unavailable Interrupt */ |
| START_EXCEPTION(altivec_unavailable); |
| NORMAL_EXCEPTION_PROLOG(0x200, BOOKE_INTERRUPT_ALTIVEC_UNAVAIL, |
| PROLOG_ADDITION_NONE) |
| /* we can probably do a shorter exception entry for that one... */ |
| EXCEPTION_COMMON(0x200) |
| #ifdef CONFIG_ALTIVEC |
| BEGIN_FTR_SECTION |
| ld r12,_MSR(r1) |
| andi. r0,r12,MSR_PR; |
| beq- 1f |
| bl load_up_altivec |
| b fast_interrupt_return |
| 1: |
| END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) |
| #endif |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl altivec_unavailable_exception |
| b interrupt_return |
| |
| /* AltiVec Assist */ |
| START_EXCEPTION(altivec_assist); |
| NORMAL_EXCEPTION_PROLOG(0x220, |
| BOOKE_INTERRUPT_ALTIVEC_ASSIST, |
| PROLOG_ADDITION_NONE) |
| EXCEPTION_COMMON(0x220) |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| #ifdef CONFIG_ALTIVEC |
| BEGIN_FTR_SECTION |
| bl altivec_assist_exception |
| END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) |
| REST_NVGPRS(r1) |
| #else |
| bl unknown_exception |
| #endif |
| b interrupt_return |
| |
| |
| /* Decrementer Interrupt */ |
| MASKABLE_EXCEPTION(0x900, BOOKE_INTERRUPT_DECREMENTER, |
| decrementer, timer_interrupt, ACK_DEC) |
| |
| /* Fixed Interval Timer Interrupt */ |
| MASKABLE_EXCEPTION(0x980, BOOKE_INTERRUPT_FIT, |
| fixed_interval, unknown_exception, ACK_FIT) |
| |
| /* Watchdog Timer Interrupt */ |
| START_EXCEPTION(watchdog); |
| CRIT_EXCEPTION_PROLOG(0x9f0, BOOKE_INTERRUPT_WATCHDOG, |
| PROLOG_ADDITION_NONE) |
| EXCEPTION_COMMON_CRIT(0x9f0) |
| bl special_reg_save |
| CHECK_NAPPING(); |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| #ifdef CONFIG_BOOKE_WDT |
| bl WatchdogException |
| #else |
| bl unknown_nmi_exception |
| #endif |
| b ret_from_crit_except |
| |
| /* System Call Interrupt */ |
| START_EXCEPTION(system_call) |
| mr r9,r13 /* keep a copy of userland r13 */ |
| mfspr r11,SPRN_SRR0 /* get return address */ |
| mfspr r12,SPRN_SRR1 /* get previous MSR */ |
| mfspr r13,SPRN_SPRG_PACA /* get our PACA */ |
| b system_call_common |
| |
| /* Auxiliary Processor Unavailable Interrupt */ |
| START_EXCEPTION(ap_unavailable); |
| NORMAL_EXCEPTION_PROLOG(0xf20, BOOKE_INTERRUPT_AP_UNAVAIL, |
| PROLOG_ADDITION_NONE) |
| EXCEPTION_COMMON(0xf20) |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl unknown_exception |
| b interrupt_return |
| |
| /* Debug exception as a critical interrupt*/ |
| START_EXCEPTION(debug_crit); |
| CRIT_EXCEPTION_PROLOG(0xd00, BOOKE_INTERRUPT_DEBUG, |
| PROLOG_ADDITION_2REGS) |
| |
| /* |
| * If there is a single step or branch-taken exception in an |
| * exception entry sequence, it was probably meant to apply to |
| * the code where the exception occurred (since exception entry |
| * doesn't turn off DE automatically). We simulate the effect |
| * of turning off DE on entry to an exception handler by turning |
| * off DE in the CSRR1 value and clearing the debug status. |
| */ |
| |
| mfspr r14,SPRN_DBSR /* check single-step/branch taken */ |
| andis. r15,r14,(DBSR_IC|DBSR_BT)@h |
| beq+ 1f |
| |
| #ifdef CONFIG_RELOCATABLE |
| __LOAD_PACA_TOC(r15) |
| LOAD_REG_ADDR_ALTTOC(r14, r15, interrupt_base_book3e) |
| LOAD_REG_ADDR_ALTTOC(r15, r15, __end_interrupts) |
| cmpld cr0,r10,r14 |
| cmpld cr1,r10,r15 |
| #else |
| LOAD_REG_IMMEDIATE_SYM(r14, r15, interrupt_base_book3e) |
| cmpld cr0, r10, r14 |
| LOAD_REG_IMMEDIATE_SYM(r14, r15, __end_interrupts) |
| cmpld cr1, r10, r14 |
| #endif |
| blt+ cr0,1f |
| bge+ cr1,1f |
| |
| /* here it looks like we got an inappropriate debug exception. */ |
| lis r14,(DBSR_IC|DBSR_BT)@h /* clear the event */ |
| rlwinm r11,r11,0,~MSR_DE /* clear DE in the CSRR1 value */ |
| mtspr SPRN_DBSR,r14 |
| mtspr SPRN_CSRR1,r11 |
| lwz r10,PACA_EXCRIT+EX_CR(r13) /* restore registers */ |
| ld r1,PACA_EXCRIT+EX_R1(r13) |
| ld r14,PACA_EXCRIT+EX_R14(r13) |
| ld r15,PACA_EXCRIT+EX_R15(r13) |
| mtcr r10 |
| ld r10,PACA_EXCRIT+EX_R10(r13) /* restore registers */ |
| ld r11,PACA_EXCRIT+EX_R11(r13) |
| mfspr r13,SPRN_SPRG_CRIT_SCRATCH |
| rfci |
| |
| /* Normal debug exception */ |
| /* XXX We only handle coming from userspace for now since we can't |
| * quite save properly an interrupted kernel state yet |
| */ |
| 1: andi. r14,r11,MSR_PR; /* check for userspace again */ |
| beq kernel_dbg_exc; /* if from kernel mode */ |
| |
| /* Now we mash up things to make it look like we are coming on a |
| * normal exception |
| */ |
| mfspr r14,SPRN_DBSR |
| std r14,_DSISR(r1) |
| ld r14,PACA_EXCRIT+EX_R14(r13) |
| ld r15,PACA_EXCRIT+EX_R15(r13) |
| EXCEPTION_COMMON_CRIT(0xd00) |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl DebugException |
| REST_NVGPRS(r1) |
| b interrupt_return |
| |
| kernel_dbg_exc: |
| b . /* NYI */ |
| |
| /* Debug exception as a debug interrupt*/ |
| START_EXCEPTION(debug_debug); |
| DBG_EXCEPTION_PROLOG(0xd00, BOOKE_INTERRUPT_DEBUG, |
| PROLOG_ADDITION_2REGS) |
| |
| /* |
| * If there is a single step or branch-taken exception in an |
| * exception entry sequence, it was probably meant to apply to |
| * the code where the exception occurred (since exception entry |
| * doesn't turn off DE automatically). We simulate the effect |
| * of turning off DE on entry to an exception handler by turning |
| * off DE in the DSRR1 value and clearing the debug status. |
| */ |
| |
| mfspr r14,SPRN_DBSR /* check single-step/branch taken */ |
| andis. r15,r14,(DBSR_IC|DBSR_BT)@h |
| beq+ 1f |
| |
| #ifdef CONFIG_RELOCATABLE |
| __LOAD_PACA_TOC(r15) |
| LOAD_REG_ADDR_ALTTOC(r14, r15, interrupt_base_book3e) |
| LOAD_REG_ADDR_ALTTOC(r15, r15, __end_interrupts) |
| cmpld cr0,r10,r14 |
| cmpld cr1,r10,r15 |
| #else |
| LOAD_REG_IMMEDIATE_SYM(r14, r15, interrupt_base_book3e) |
| cmpld cr0, r10, r14 |
| LOAD_REG_IMMEDIATE_SYM(r14, r15,__end_interrupts) |
| cmpld cr1, r10, r14 |
| #endif |
| blt+ cr0,1f |
| bge+ cr1,1f |
| |
| /* here it looks like we got an inappropriate debug exception. */ |
| lis r14,(DBSR_IC|DBSR_BT)@h /* clear the event */ |
| rlwinm r11,r11,0,~MSR_DE /* clear DE in the DSRR1 value */ |
| mtspr SPRN_DBSR,r14 |
| mtspr SPRN_DSRR1,r11 |
| lwz r10,PACA_EXDBG+EX_CR(r13) /* restore registers */ |
| ld r1,PACA_EXDBG+EX_R1(r13) |
| ld r14,PACA_EXDBG+EX_R14(r13) |
| ld r15,PACA_EXDBG+EX_R15(r13) |
| mtcr r10 |
| ld r10,PACA_EXDBG+EX_R10(r13) /* restore registers */ |
| ld r11,PACA_EXDBG+EX_R11(r13) |
| mfspr r13,SPRN_SPRG_DBG_SCRATCH |
| rfdi |
| |
| /* Normal debug exception */ |
| /* XXX We only handle coming from userspace for now since we can't |
| * quite save properly an interrupted kernel state yet |
| */ |
| 1: andi. r14,r11,MSR_PR; /* check for userspace again */ |
| beq kernel_dbg_exc; /* if from kernel mode */ |
| |
| /* Now we mash up things to make it look like we are coming on a |
| * normal exception |
| */ |
| mfspr r14,SPRN_DBSR |
| std r14,_DSISR(r1) |
| ld r14,PACA_EXDBG+EX_R14(r13) |
| ld r15,PACA_EXDBG+EX_R15(r13) |
| EXCEPTION_COMMON_DBG(0xd08) |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl DebugException |
| REST_NVGPRS(r1) |
| b interrupt_return |
| |
| START_EXCEPTION(perfmon); |
| NORMAL_EXCEPTION_PROLOG(0x260, BOOKE_INTERRUPT_PERFORMANCE_MONITOR, |
| PROLOG_ADDITION_NONE) |
| EXCEPTION_COMMON(0x260) |
| CHECK_NAPPING() |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| /* |
| * XXX: Returning from performance_monitor_exception taken as a |
| * soft-NMI (Linux irqs disabled) may be risky to use interrupt_return |
| * and could cause bugs in return or elsewhere. That case should just |
| * restore registers and return. There is a workaround for one known |
| * problem in interrupt_exit_kernel_prepare(). |
| */ |
| bl performance_monitor_exception |
| b interrupt_return |
| |
| /* Doorbell interrupt */ |
| MASKABLE_EXCEPTION(0x280, BOOKE_INTERRUPT_DOORBELL, |
| doorbell, doorbell_exception, ACK_NONE) |
| |
| /* Doorbell critical Interrupt */ |
| START_EXCEPTION(doorbell_crit); |
| CRIT_EXCEPTION_PROLOG(0x2a0, BOOKE_INTERRUPT_DOORBELL_CRITICAL, |
| PROLOG_ADDITION_NONE) |
| EXCEPTION_COMMON_CRIT(0x2a0) |
| bl special_reg_save |
| CHECK_NAPPING(); |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl unknown_nmi_exception |
| b ret_from_crit_except |
| |
| /* |
| * Guest doorbell interrupt |
| * This general exception use GSRRx save/restore registers |
| */ |
| START_EXCEPTION(guest_doorbell); |
| GDBELL_EXCEPTION_PROLOG(0x2c0, BOOKE_INTERRUPT_GUEST_DBELL, |
| PROLOG_ADDITION_NONE) |
| EXCEPTION_COMMON(0x2c0) |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl unknown_exception |
| b interrupt_return |
| |
| /* Guest Doorbell critical Interrupt */ |
| START_EXCEPTION(guest_doorbell_crit); |
| CRIT_EXCEPTION_PROLOG(0x2e0, BOOKE_INTERRUPT_GUEST_DBELL_CRIT, |
| PROLOG_ADDITION_NONE) |
| EXCEPTION_COMMON_CRIT(0x2e0) |
| bl special_reg_save |
| CHECK_NAPPING(); |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl unknown_nmi_exception |
| b ret_from_crit_except |
| |
| /* Hypervisor call */ |
| START_EXCEPTION(hypercall); |
| NORMAL_EXCEPTION_PROLOG(0x310, BOOKE_INTERRUPT_HV_SYSCALL, |
| PROLOG_ADDITION_NONE) |
| EXCEPTION_COMMON(0x310) |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl unknown_exception |
| b interrupt_return |
| |
| /* Embedded Hypervisor priviledged */ |
| START_EXCEPTION(ehpriv); |
| NORMAL_EXCEPTION_PROLOG(0x320, BOOKE_INTERRUPT_HV_PRIV, |
| PROLOG_ADDITION_NONE) |
| EXCEPTION_COMMON(0x320) |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl unknown_exception |
| b interrupt_return |
| |
| /* LRAT Error interrupt */ |
| START_EXCEPTION(lrat_error); |
| NORMAL_EXCEPTION_PROLOG(0x340, BOOKE_INTERRUPT_LRAT_ERROR, |
| PROLOG_ADDITION_NONE) |
| EXCEPTION_COMMON(0x340) |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl unknown_exception |
| b interrupt_return |
| |
| .macro SEARCH_RESTART_TABLE |
| #ifdef CONFIG_RELOCATABLE |
| __LOAD_PACA_TOC(r11) |
| LOAD_REG_ADDR_ALTTOC(r14, r11, __start___restart_table) |
| LOAD_REG_ADDR_ALTTOC(r15, r11, __stop___restart_table) |
| #else |
| LOAD_REG_IMMEDIATE_SYM(r14, r11, __start___restart_table) |
| LOAD_REG_IMMEDIATE_SYM(r15, r11, __stop___restart_table) |
| #endif |
| 300: |
| cmpd r14,r15 |
| beq 302f |
| ld r11,0(r14) |
| cmpld r10,r11 |
| blt 301f |
| ld r11,8(r14) |
| cmpld r10,r11 |
| bge 301f |
| ld r11,16(r14) |
| b 303f |
| 301: |
| addi r14,r14,24 |
| b 300b |
| 302: |
| li r11,0 |
| 303: |
| .endm |
| |
| /* |
| * An interrupt came in while soft-disabled; We mark paca->irq_happened |
| * accordingly and if the interrupt is level sensitive, we hard disable |
| * hard disable (full_mask) corresponds to PACA_IRQ_MUST_HARD_MASK, so |
| * keep these in synch. |
| */ |
| |
| .macro masked_interrupt_book3e paca_irq full_mask |
| std r14,PACA_EXGEN+EX_R14(r13) |
| std r15,PACA_EXGEN+EX_R15(r13) |
| |
| lbz r10,PACAIRQHAPPENED(r13) |
| .if \full_mask == 1 |
| ori r10,r10,\paca_irq | PACA_IRQ_HARD_DIS |
| .else |
| ori r10,r10,\paca_irq |
| .endif |
| stb r10,PACAIRQHAPPENED(r13) |
| |
| .if \full_mask == 1 |
| xori r11,r11,MSR_EE /* clear MSR_EE */ |
| mtspr SPRN_SRR1,r11 |
| .endif |
| |
| mfspr r10,SPRN_SRR0 |
| SEARCH_RESTART_TABLE |
| cmpdi r11,0 |
| beq 1f |
| mtspr SPRN_SRR0,r11 /* return to restart address */ |
| 1: |
| |
| lwz r11,PACA_EXGEN+EX_CR(r13) |
| mtcr r11 |
| ld r10,PACA_EXGEN+EX_R10(r13) |
| ld r11,PACA_EXGEN+EX_R11(r13) |
| ld r14,PACA_EXGEN+EX_R14(r13) |
| ld r15,PACA_EXGEN+EX_R15(r13) |
| mfspr r13,SPRN_SPRG_GEN_SCRATCH |
| rfi |
| b . |
| .endm |
| |
| masked_interrupt_book3e_0x500: |
| masked_interrupt_book3e PACA_IRQ_EE 1 |
| |
| masked_interrupt_book3e_0x900: |
| ACK_DEC(r10); |
| masked_interrupt_book3e PACA_IRQ_DEC 0 |
| |
| masked_interrupt_book3e_0x980: |
| ACK_FIT(r10); |
| masked_interrupt_book3e PACA_IRQ_DEC 0 |
| |
| masked_interrupt_book3e_0x280: |
| masked_interrupt_book3e_0x2c0: |
| masked_interrupt_book3e PACA_IRQ_DBELL 0 |
| |
| /* |
| * This is called from 0x300 and 0x400 handlers after the prologs with |
| * r14 and r15 containing the fault address and error code, with the |
| * original values stashed away in the PACA |
| */ |
| storage_fault_common: |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl do_page_fault |
| b interrupt_return |
| |
| /* |
| * Alignment exception doesn't fit entirely in the 0x100 bytes so it |
| * continues here. |
| */ |
| alignment_more: |
| addi r3,r1,STACK_FRAME_OVERHEAD |
| bl alignment_exception |
| REST_NVGPRS(r1) |
| b interrupt_return |
| |
| /* |
| * Trampolines used when spotting a bad kernel stack pointer in |
| * the exception entry code. |
| * |
| * TODO: move some bits like SRR0 read to trampoline, pass PACA |
| * index around, etc... to handle crit & mcheck |
| */ |
| BAD_STACK_TRAMPOLINE(0x000) |
| BAD_STACK_TRAMPOLINE(0x100) |
| BAD_STACK_TRAMPOLINE(0x200) |
| BAD_STACK_TRAMPOLINE(0x220) |
| BAD_STACK_TRAMPOLINE(0x260) |
| BAD_STACK_TRAMPOLINE(0x280) |
| BAD_STACK_TRAMPOLINE(0x2a0) |
| BAD_STACK_TRAMPOLINE(0x2c0) |
| BAD_STACK_TRAMPOLINE(0x2e0) |
| BAD_STACK_TRAMPOLINE(0x300) |
| BAD_STACK_TRAMPOLINE(0x310) |
| BAD_STACK_TRAMPOLINE(0x320) |
| BAD_STACK_TRAMPOLINE(0x340) |
| BAD_STACK_TRAMPOLINE(0x400) |
| BAD_STACK_TRAMPOLINE(0x500) |
| BAD_STACK_TRAMPOLINE(0x600) |
| BAD_STACK_TRAMPOLINE(0x700) |
| BAD_STACK_TRAMPOLINE(0x800) |
| BAD_STACK_TRAMPOLINE(0x900) |
| BAD_STACK_TRAMPOLINE(0x980) |
| BAD_STACK_TRAMPOLINE(0x9f0) |
| BAD_STACK_TRAMPOLINE(0xa00) |
| BAD_STACK_TRAMPOLINE(0xb00) |
| BAD_STACK_TRAMPOLINE(0xc00) |
| BAD_STACK_TRAMPOLINE(0xd00) |
| BAD_STACK_TRAMPOLINE(0xd08) |
| BAD_STACK_TRAMPOLINE(0xe00) |
| BAD_STACK_TRAMPOLINE(0xf00) |
| BAD_STACK_TRAMPOLINE(0xf20) |
| |
| .globl bad_stack_book3e |
| bad_stack_book3e: |
| /* XXX: Needs to make SPRN_SPRG_GEN depend on exception type */ |
| mfspr r10,SPRN_SRR0; /* read SRR0 before touching stack */ |
| ld r1,PACAEMERGSP(r13) |
| subi r1,r1,64+INT_FRAME_SIZE |
| std r10,_NIP(r1) |
| std r11,_MSR(r1) |
| ld r10,PACA_EXGEN+EX_R1(r13) /* FIXME for crit & mcheck */ |
| lwz r11,PACA_EXGEN+EX_CR(r13) /* FIXME for crit & mcheck */ |
| std r10,GPR1(r1) |
| std r11,_CCR(r1) |
| mfspr r10,SPRN_DEAR |
| mfspr r11,SPRN_ESR |
| std r10,_DEAR(r1) |
| std r11,_ESR(r1) |
| SAVE_GPR(0, r1); /* save r0 in stackframe */ \ |
| SAVE_GPRS(2, 9, r1); /* save r2 - r9 in stackframe */ \ |
| ld r3,PACA_EXGEN+EX_R10(r13);/* get back r10 */ \ |
| ld r4,PACA_EXGEN+EX_R11(r13);/* get back r11 */ \ |
| mfspr r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 XXX can be wrong */ \ |
| std r3,GPR10(r1); /* save r10 to stackframe */ \ |
| std r4,GPR11(r1); /* save r11 to stackframe */ \ |
| SAVE_GPR(12, r1); /* save r12 in stackframe */ \ |
| std r5,GPR13(r1); /* save it to stackframe */ \ |
| mflr r10 |
| mfctr r11 |
| mfxer r12 |
| std r10,_LINK(r1) |
| std r11,_CTR(r1) |
| std r12,_XER(r1) |
| SAVE_NVGPRS(r1) |
| lhz r12,PACA_TRAP_SAVE(r13) |
| std r12,_TRAP(r1) |
| addi r11,r1,INT_FRAME_SIZE |
| std r11,0(r1) |
| ZEROIZE_GPR(12) |
| std r12,0(r11) |
| LOAD_PACA_TOC() |
| 1: addi r3,r1,STACK_FRAME_OVERHEAD |
| bl kernel_bad_stack |
| b 1b |
| |
| /* |
| * Setup the initial TLB for a core. This current implementation |
| * assume that whatever we are running off will not conflict with |
| * the new mapping at PAGE_OFFSET. |
| */ |
| _GLOBAL(initial_tlb_book3e) |
| |
| /* Look for the first TLB with IPROT set */ |
| mfspr r4,SPRN_TLB0CFG |
| andi. r3,r4,TLBnCFG_IPROT |
| lis r3,MAS0_TLBSEL(0)@h |
| bne found_iprot |
| |
| mfspr r4,SPRN_TLB1CFG |
| andi. r3,r4,TLBnCFG_IPROT |
| lis r3,MAS0_TLBSEL(1)@h |
| bne found_iprot |
| |
| mfspr r4,SPRN_TLB2CFG |
| andi. r3,r4,TLBnCFG_IPROT |
| lis r3,MAS0_TLBSEL(2)@h |
| bne found_iprot |
| |
| lis r3,MAS0_TLBSEL(3)@h |
| mfspr r4,SPRN_TLB3CFG |
| /* fall through */ |
| |
| found_iprot: |
| andi. r5,r4,TLBnCFG_HES |
| bne have_hes |
| |
| mflr r8 /* save LR */ |
| /* 1. Find the index of the entry we're executing in |
| * |
| * r3 = MAS0_TLBSEL (for the iprot array) |
| * r4 = SPRN_TLBnCFG |
| */ |
| bcl 20,31,$+4 /* Find our address */ |
| invstr: mflr r6 /* Make it accessible */ |
| mfmsr r7 |
| rlwinm r5,r7,27,31,31 /* extract MSR[IS] */ |
| mfspr r7,SPRN_PID |
| slwi r7,r7,16 |
| or r7,r7,r5 |
| mtspr SPRN_MAS6,r7 |
| tlbsx 0,r6 /* search MSR[IS], SPID=PID */ |
| |
| mfspr r3,SPRN_MAS0 |
| rlwinm r5,r3,16,20,31 /* Extract MAS0(Entry) */ |
| |
| mfspr r7,SPRN_MAS1 /* Insure IPROT set */ |
| oris r7,r7,MAS1_IPROT@h |
| mtspr SPRN_MAS1,r7 |
| tlbwe |
| |
| /* 2. Invalidate all entries except the entry we're executing in |
| * |
| * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in |
| * r4 = SPRN_TLBnCFG |
| * r5 = ESEL of entry we are running in |
| */ |
| andi. r4,r4,TLBnCFG_N_ENTRY /* Extract # entries */ |
| li r6,0 /* Set Entry counter to 0 */ |
| 1: mr r7,r3 /* Set MAS0(TLBSEL) */ |
| rlwimi r7,r6,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */ |
| mtspr SPRN_MAS0,r7 |
| tlbre |
| mfspr r7,SPRN_MAS1 |
| rlwinm r7,r7,0,2,31 /* Clear MAS1 Valid and IPROT */ |
| cmpw r5,r6 |
| beq skpinv /* Dont update the current execution TLB */ |
| mtspr SPRN_MAS1,r7 |
| tlbwe |
| isync |
| skpinv: addi r6,r6,1 /* Increment */ |
| cmpw r6,r4 /* Are we done? */ |
| bne 1b /* If not, repeat */ |
| |
| /* Invalidate all TLBs */ |
| PPC_TLBILX_ALL(0,R0) |
| sync |
| isync |
| |
| /* 3. Setup a temp mapping and jump to it |
| * |
| * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in |
| * r5 = ESEL of entry we are running in |
| */ |
| andi. r7,r5,0x1 /* Find an entry not used and is non-zero */ |
| addi r7,r7,0x1 |
| mr r4,r3 /* Set MAS0(TLBSEL) = 1 */ |
| mtspr SPRN_MAS0,r4 |
| tlbre |
| |
| rlwimi r4,r7,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r7) */ |
| mtspr SPRN_MAS0,r4 |
| |
| mfspr r7,SPRN_MAS1 |
| xori r6,r7,MAS1_TS /* Setup TMP mapping in the other Address space */ |
| mtspr SPRN_MAS1,r6 |
| |
| tlbwe |
| |
| mfmsr r6 |
| xori r6,r6,MSR_IS |
| mtspr SPRN_SRR1,r6 |
| bcl 20,31,$+4 /* Find our address */ |
| 1: mflr r6 |
| addi r6,r6,(2f - 1b) |
| mtspr SPRN_SRR0,r6 |
| rfi |
| 2: |
| |
| /* 4. Clear out PIDs & Search info |
| * |
| * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in |
| * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping |
| * r5 = MAS3 |
| */ |
| li r6,0 |
| mtspr SPRN_MAS6,r6 |
| mtspr SPRN_PID,r6 |
| |
| /* 5. Invalidate mapping we started in |
| * |
| * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in |
| * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping |
| * r5 = MAS3 |
| */ |
| mtspr SPRN_MAS0,r3 |
| tlbre |
| mfspr r6,SPRN_MAS1 |
| rlwinm r6,r6,0,2,31 /* clear IPROT and VALID */ |
| mtspr SPRN_MAS1,r6 |
| tlbwe |
| sync |
| isync |
| |
| /* 6. Setup KERNELBASE mapping in TLB[0] |
| * |
| * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in |
| * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping |
| * r5 = MAS3 |
| */ |
| rlwinm r3,r3,0,16,3 /* clear ESEL */ |
| mtspr SPRN_MAS0,r3 |
| lis r6,(MAS1_VALID|MAS1_IPROT)@h |
| ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l |
| mtspr SPRN_MAS1,r6 |
| |
| LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET | MAS2_M_IF_NEEDED) |
| mtspr SPRN_MAS2,r6 |
| |
| rlwinm r5,r5,0,0,25 |
| ori r5,r5,MAS3_SR | MAS3_SW | MAS3_SX |
| mtspr SPRN_MAS3,r5 |
| li r5,-1 |
| rlwinm r5,r5,0,0,25 |
| |
| tlbwe |
| |
| /* 7. Jump to KERNELBASE mapping |
| * |
| * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping |
| */ |
| /* Now we branch the new virtual address mapped by this entry */ |
| bcl 20,31,$+4 /* Find our address */ |
| 1: mflr r6 |
| addi r6,r6,(2f - 1b) |
| tovirt(r6,r6) |
| lis r7,MSR_KERNEL@h |
| ori r7,r7,MSR_KERNEL@l |
| mtspr SPRN_SRR0,r6 |
| mtspr SPRN_SRR1,r7 |
| rfi /* start execution out of TLB1[0] entry */ |
| 2: |
| |
| /* 8. Clear out the temp mapping |
| * |
| * r4 = MAS0 w/TLBSEL & ESEL for the entry we are running in |
| */ |
| mtspr SPRN_MAS0,r4 |
| tlbre |
| mfspr r5,SPRN_MAS1 |
| rlwinm r5,r5,0,2,31 /* clear IPROT and VALID */ |
| mtspr SPRN_MAS1,r5 |
| tlbwe |
| sync |
| isync |
| |
| /* We translate LR and return */ |
| tovirt(r8,r8) |
| mtlr r8 |
| blr |
| |
| have_hes: |
| /* Setup MAS 0,1,2,3 and 7 for tlbwe of a 1G entry that maps the |
| * kernel linear mapping. We also set MAS8 once for all here though |
| * that will have to be made dependent on whether we are running under |
| * a hypervisor I suppose. |
| */ |
| |
| /* BEWARE, MAGIC |
| * This code is called as an ordinary function on the boot CPU. But to |
| * avoid duplication, this code is also used in SCOM bringup of |
| * secondary CPUs. We read the code between the initial_tlb_code_start |
| * and initial_tlb_code_end labels one instruction at a time and RAM it |
| * into the new core via SCOM. That doesn't process branches, so there |
| * must be none between those two labels. It also means if this code |
| * ever takes any parameters, the SCOM code must also be updated to |
| * provide them. |
| */ |
| .globl a2_tlbinit_code_start |
| a2_tlbinit_code_start: |
| |
| ori r11,r3,MAS0_WQ_ALLWAYS |
| oris r11,r11,MAS0_ESEL(3)@h /* Use way 3: workaround A2 erratum 376 */ |
| mtspr SPRN_MAS0,r11 |
| lis r3,(MAS1_VALID | MAS1_IPROT)@h |
| ori r3,r3,BOOK3E_PAGESZ_1GB << MAS1_TSIZE_SHIFT |
| mtspr SPRN_MAS1,r3 |
| LOAD_REG_IMMEDIATE(r3, PAGE_OFFSET | MAS2_M) |
| mtspr SPRN_MAS2,r3 |
| li r3,MAS3_SR | MAS3_SW | MAS3_SX |
| mtspr SPRN_MAS7_MAS3,r3 |
| li r3,0 |
| mtspr SPRN_MAS8,r3 |
| |
| /* Write the TLB entry */ |
| tlbwe |
| |
| .globl a2_tlbinit_after_linear_map |
| a2_tlbinit_after_linear_map: |
| |
| /* Now we branch the new virtual address mapped by this entry */ |
| #ifdef CONFIG_RELOCATABLE |
| __LOAD_PACA_TOC(r5) |
| LOAD_REG_ADDR_ALTTOC(r3, r5, 1f) |
| #else |
| LOAD_REG_IMMEDIATE_SYM(r3, r5, 1f) |
| #endif |
| mtctr r3 |
| bctr |
| |
| 1: /* We are now running at PAGE_OFFSET, clean the TLB of everything |
| * else (including IPROTed things left by firmware) |
| * r4 = TLBnCFG |
| * r3 = current address (more or less) |
| */ |
| |
| li r5,0 |
| mtspr SPRN_MAS6,r5 |
| tlbsx 0,r3 |
| |
| rlwinm r9,r4,0,TLBnCFG_N_ENTRY |
| rlwinm r10,r4,8,0xff |
| addi r10,r10,-1 /* Get inner loop mask */ |
| |
| li r3,1 |
| |
| mfspr r5,SPRN_MAS1 |
| rlwinm r5,r5,0,(~(MAS1_VALID|MAS1_IPROT)) |
| |
| mfspr r6,SPRN_MAS2 |
| rldicr r6,r6,0,51 /* Extract EPN */ |
| |
| mfspr r7,SPRN_MAS0 |
| rlwinm r7,r7,0,0xffff0fff /* Clear HES and WQ */ |
| |
| rlwinm r8,r7,16,0xfff /* Extract ESEL */ |
| |
| 2: add r4,r3,r8 |
| and r4,r4,r10 |
| |
| rlwimi r7,r4,16,MAS0_ESEL_MASK |
| |
| mtspr SPRN_MAS0,r7 |
| mtspr SPRN_MAS1,r5 |
| mtspr SPRN_MAS2,r6 |
| tlbwe |
| |
| addi r3,r3,1 |
| and. r4,r3,r10 |
| |
| bne 3f |
| addis r6,r6,(1<<30)@h |
| 3: |
| cmpw r3,r9 |
| blt 2b |
| |
| .globl a2_tlbinit_after_iprot_flush |
| a2_tlbinit_after_iprot_flush: |
| |
| PPC_TLBILX(0,0,R0) |
| sync |
| isync |
| |
| .globl a2_tlbinit_code_end |
| a2_tlbinit_code_end: |
| |
| /* We translate LR and return */ |
| mflr r3 |
| tovirt(r3,r3) |
| mtlr r3 |
| blr |
| |
| /* |
| * Main entry (boot CPU, thread 0) |
| * |
| * We enter here from head_64.S, possibly after the prom_init trampoline |
| * with r3 and r4 already saved to r31 and 30 respectively and in 64 bits |
| * mode. Anything else is as it was left by the bootloader |
| * |
| * Initial requirements of this port: |
| * |
| * - Kernel loaded at 0 physical |
| * - A good lump of memory mapped 0:0 by UTLB entry 0 |
| * - MSR:IS & MSR:DS set to 0 |
| * |
| * Note that some of the above requirements will be relaxed in the future |
| * as the kernel becomes smarter at dealing with different initial conditions |
| * but for now you have to be careful |
| */ |
| _GLOBAL(start_initialization_book3e) |
| mflr r28 |
| |
| /* First, we need to setup some initial TLBs to map the kernel |
| * text, data and bss at PAGE_OFFSET. We don't have a real mode |
| * and always use AS 0, so we just set it up to match our link |
| * address and never use 0 based addresses. |
| */ |
| bl initial_tlb_book3e |
| |
| /* Init global core bits */ |
| bl init_core_book3e |
| |
| /* Init per-thread bits */ |
| bl init_thread_book3e |
| |
| /* Return to common init code */ |
| tovirt(r28,r28) |
| mtlr r28 |
| blr |
| |
| |
| /* |
| * Secondary core/processor entry |
| * |
| * This is entered for thread 0 of a secondary core, all other threads |
| * are expected to be stopped. It's similar to start_initialization_book3e |
| * except that it's generally entered from the holding loop in head_64.S |
| * after CPUs have been gathered by Open Firmware. |
| * |
| * We assume we are in 32 bits mode running with whatever TLB entry was |
| * set for us by the firmware or POR engine. |
| */ |
| _GLOBAL(book3e_secondary_core_init_tlb_set) |
| li r4,1 |
| b generic_secondary_smp_init |
| |
| _GLOBAL(book3e_secondary_core_init) |
| mflr r28 |
| |
| /* Do we need to setup initial TLB entry ? */ |
| cmplwi r4,0 |
| bne 2f |
| |
| /* Setup TLB for this core */ |
| bl initial_tlb_book3e |
| |
| /* We can return from the above running at a different |
| * address, so recalculate r2 (TOC) |
| */ |
| bl relative_toc |
| |
| /* Init global core bits */ |
| 2: bl init_core_book3e |
| |
| /* Init per-thread bits */ |
| 3: bl init_thread_book3e |
| |
| /* Return to common init code at proper virtual address. |
| * |
| * Due to various previous assumptions, we know we entered this |
| * function at either the final PAGE_OFFSET mapping or using a |
| * 1:1 mapping at 0, so we don't bother doing a complicated check |
| * here, we just ensure the return address has the right top bits. |
| * |
| * Note that if we ever want to be smarter about where we can be |
| * started from, we have to be careful that by the time we reach |
| * the code below we may already be running at a different location |
| * than the one we were called from since initial_tlb_book3e can |
| * have moved us already. |
| */ |
| cmpdi cr0,r28,0 |
| blt 1f |
| lis r3,PAGE_OFFSET@highest |
| sldi r3,r3,32 |
| or r28,r28,r3 |
| 1: mtlr r28 |
| blr |
| |
| _GLOBAL(book3e_secondary_thread_init) |
| mflr r28 |
| b 3b |
| |
| .globl init_core_book3e |
| init_core_book3e: |
| /* Establish the interrupt vector base */ |
| tovirt(r2,r2) |
| LOAD_REG_ADDR(r3, interrupt_base_book3e) |
| mtspr SPRN_IVPR,r3 |
| sync |
| blr |
| |
| init_thread_book3e: |
| lis r3,(SPRN_EPCR_ICM | SPRN_EPCR_GICM)@h |
| mtspr SPRN_EPCR,r3 |
| |
| /* Make sure interrupts are off */ |
| wrteei 0 |
| |
| /* disable all timers and clear out status */ |
| li r3,0 |
| mtspr SPRN_TCR,r3 |
| mfspr r3,SPRN_TSR |
| mtspr SPRN_TSR,r3 |
| |
| blr |
| |
| _GLOBAL(__setup_base_ivors) |
| SET_IVOR(0, 0x020) /* Critical Input */ |
| SET_IVOR(1, 0x000) /* Machine Check */ |
| SET_IVOR(2, 0x060) /* Data Storage */ |
| SET_IVOR(3, 0x080) /* Instruction Storage */ |
| SET_IVOR(4, 0x0a0) /* External Input */ |
| SET_IVOR(5, 0x0c0) /* Alignment */ |
| SET_IVOR(6, 0x0e0) /* Program */ |
| SET_IVOR(7, 0x100) /* FP Unavailable */ |
| SET_IVOR(8, 0x120) /* System Call */ |
| SET_IVOR(9, 0x140) /* Auxiliary Processor Unavailable */ |
| SET_IVOR(10, 0x160) /* Decrementer */ |
| SET_IVOR(11, 0x180) /* Fixed Interval Timer */ |
| SET_IVOR(12, 0x1a0) /* Watchdog Timer */ |
| SET_IVOR(13, 0x1c0) /* Data TLB Error */ |
| SET_IVOR(14, 0x1e0) /* Instruction TLB Error */ |
| SET_IVOR(15, 0x040) /* Debug */ |
| |
| sync |
| |
| blr |
| |
| _GLOBAL(setup_altivec_ivors) |
| SET_IVOR(32, 0x200) /* AltiVec Unavailable */ |
| SET_IVOR(33, 0x220) /* AltiVec Assist */ |
| blr |
| |
| _GLOBAL(setup_perfmon_ivor) |
| SET_IVOR(35, 0x260) /* Performance Monitor */ |
| blr |
| |
| _GLOBAL(setup_doorbell_ivors) |
| SET_IVOR(36, 0x280) /* Processor Doorbell */ |
| SET_IVOR(37, 0x2a0) /* Processor Doorbell Crit */ |
| blr |
| |
| _GLOBAL(setup_ehv_ivors) |
| SET_IVOR(40, 0x300) /* Embedded Hypervisor System Call */ |
| SET_IVOR(41, 0x320) /* Embedded Hypervisor Privilege */ |
| SET_IVOR(38, 0x2c0) /* Guest Processor Doorbell */ |
| SET_IVOR(39, 0x2e0) /* Guest Processor Doorbell Crit/MC */ |
| blr |
| |
| _GLOBAL(setup_lrat_ivor) |
| SET_IVOR(42, 0x340) /* LRAT Error */ |
| blr |