| /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note |
| * |
| * Copyright 2016-2022 HabanaLabs, Ltd. |
| * All Rights Reserved. |
| * |
| */ |
| |
| #ifndef HABANALABS_H_ |
| #define HABANALABS_H_ |
| |
| #include <linux/types.h> |
| #include <linux/ioctl.h> |
| |
| /* |
| * Defines that are asic-specific but constitutes as ABI between kernel driver |
| * and userspace |
| */ |
| #define GOYA_KMD_SRAM_RESERVED_SIZE_FROM_START 0x8000 /* 32KB */ |
| #define GAUDI_DRIVER_SRAM_RESERVED_SIZE_FROM_START 0x80 /* 128 bytes */ |
| |
| /* |
| * 128 SOBs reserved for collective wait |
| * 16 SOBs reserved for sync stream |
| */ |
| #define GAUDI_FIRST_AVAILABLE_W_S_SYNC_OBJECT 144 |
| |
| /* |
| * 64 monitors reserved for collective wait |
| * 8 monitors reserved for sync stream |
| */ |
| #define GAUDI_FIRST_AVAILABLE_W_S_MONITOR 72 |
| |
| /* Max number of elements in timestamps registration buffers */ |
| #define TS_MAX_ELEMENTS_NUM (1 << 20) /* 1MB */ |
| |
| /* |
| * Goya queue Numbering |
| * |
| * The external queues (PCI DMA channels) MUST be before the internal queues |
| * and each group (PCI DMA channels and internal) must be contiguous inside |
| * itself but there can be a gap between the two groups (although not |
| * recommended) |
| */ |
| |
| enum goya_queue_id { |
| GOYA_QUEUE_ID_DMA_0 = 0, |
| GOYA_QUEUE_ID_DMA_1 = 1, |
| GOYA_QUEUE_ID_DMA_2 = 2, |
| GOYA_QUEUE_ID_DMA_3 = 3, |
| GOYA_QUEUE_ID_DMA_4 = 4, |
| GOYA_QUEUE_ID_CPU_PQ = 5, |
| GOYA_QUEUE_ID_MME = 6, /* Internal queues start here */ |
| GOYA_QUEUE_ID_TPC0 = 7, |
| GOYA_QUEUE_ID_TPC1 = 8, |
| GOYA_QUEUE_ID_TPC2 = 9, |
| GOYA_QUEUE_ID_TPC3 = 10, |
| GOYA_QUEUE_ID_TPC4 = 11, |
| GOYA_QUEUE_ID_TPC5 = 12, |
| GOYA_QUEUE_ID_TPC6 = 13, |
| GOYA_QUEUE_ID_TPC7 = 14, |
| GOYA_QUEUE_ID_SIZE |
| }; |
| |
| /* |
| * Gaudi queue Numbering |
| * External queues (PCI DMA channels) are DMA_0_*, DMA_1_* and DMA_5_*. |
| * Except one CPU queue, all the rest are internal queues. |
| */ |
| |
| enum gaudi_queue_id { |
| GAUDI_QUEUE_ID_DMA_0_0 = 0, /* external */ |
| GAUDI_QUEUE_ID_DMA_0_1 = 1, /* external */ |
| GAUDI_QUEUE_ID_DMA_0_2 = 2, /* external */ |
| GAUDI_QUEUE_ID_DMA_0_3 = 3, /* external */ |
| GAUDI_QUEUE_ID_DMA_1_0 = 4, /* external */ |
| GAUDI_QUEUE_ID_DMA_1_1 = 5, /* external */ |
| GAUDI_QUEUE_ID_DMA_1_2 = 6, /* external */ |
| GAUDI_QUEUE_ID_DMA_1_3 = 7, /* external */ |
| GAUDI_QUEUE_ID_CPU_PQ = 8, /* CPU */ |
| GAUDI_QUEUE_ID_DMA_2_0 = 9, /* internal */ |
| GAUDI_QUEUE_ID_DMA_2_1 = 10, /* internal */ |
| GAUDI_QUEUE_ID_DMA_2_2 = 11, /* internal */ |
| GAUDI_QUEUE_ID_DMA_2_3 = 12, /* internal */ |
| GAUDI_QUEUE_ID_DMA_3_0 = 13, /* internal */ |
| GAUDI_QUEUE_ID_DMA_3_1 = 14, /* internal */ |
| GAUDI_QUEUE_ID_DMA_3_2 = 15, /* internal */ |
| GAUDI_QUEUE_ID_DMA_3_3 = 16, /* internal */ |
| GAUDI_QUEUE_ID_DMA_4_0 = 17, /* internal */ |
| GAUDI_QUEUE_ID_DMA_4_1 = 18, /* internal */ |
| GAUDI_QUEUE_ID_DMA_4_2 = 19, /* internal */ |
| GAUDI_QUEUE_ID_DMA_4_3 = 20, /* internal */ |
| GAUDI_QUEUE_ID_DMA_5_0 = 21, /* internal */ |
| GAUDI_QUEUE_ID_DMA_5_1 = 22, /* internal */ |
| GAUDI_QUEUE_ID_DMA_5_2 = 23, /* internal */ |
| GAUDI_QUEUE_ID_DMA_5_3 = 24, /* internal */ |
| GAUDI_QUEUE_ID_DMA_6_0 = 25, /* internal */ |
| GAUDI_QUEUE_ID_DMA_6_1 = 26, /* internal */ |
| GAUDI_QUEUE_ID_DMA_6_2 = 27, /* internal */ |
| GAUDI_QUEUE_ID_DMA_6_3 = 28, /* internal */ |
| GAUDI_QUEUE_ID_DMA_7_0 = 29, /* internal */ |
| GAUDI_QUEUE_ID_DMA_7_1 = 30, /* internal */ |
| GAUDI_QUEUE_ID_DMA_7_2 = 31, /* internal */ |
| GAUDI_QUEUE_ID_DMA_7_3 = 32, /* internal */ |
| GAUDI_QUEUE_ID_MME_0_0 = 33, /* internal */ |
| GAUDI_QUEUE_ID_MME_0_1 = 34, /* internal */ |
| GAUDI_QUEUE_ID_MME_0_2 = 35, /* internal */ |
| GAUDI_QUEUE_ID_MME_0_3 = 36, /* internal */ |
| GAUDI_QUEUE_ID_MME_1_0 = 37, /* internal */ |
| GAUDI_QUEUE_ID_MME_1_1 = 38, /* internal */ |
| GAUDI_QUEUE_ID_MME_1_2 = 39, /* internal */ |
| GAUDI_QUEUE_ID_MME_1_3 = 40, /* internal */ |
| GAUDI_QUEUE_ID_TPC_0_0 = 41, /* internal */ |
| GAUDI_QUEUE_ID_TPC_0_1 = 42, /* internal */ |
| GAUDI_QUEUE_ID_TPC_0_2 = 43, /* internal */ |
| GAUDI_QUEUE_ID_TPC_0_3 = 44, /* internal */ |
| GAUDI_QUEUE_ID_TPC_1_0 = 45, /* internal */ |
| GAUDI_QUEUE_ID_TPC_1_1 = 46, /* internal */ |
| GAUDI_QUEUE_ID_TPC_1_2 = 47, /* internal */ |
| GAUDI_QUEUE_ID_TPC_1_3 = 48, /* internal */ |
| GAUDI_QUEUE_ID_TPC_2_0 = 49, /* internal */ |
| GAUDI_QUEUE_ID_TPC_2_1 = 50, /* internal */ |
| GAUDI_QUEUE_ID_TPC_2_2 = 51, /* internal */ |
| GAUDI_QUEUE_ID_TPC_2_3 = 52, /* internal */ |
| GAUDI_QUEUE_ID_TPC_3_0 = 53, /* internal */ |
| GAUDI_QUEUE_ID_TPC_3_1 = 54, /* internal */ |
| GAUDI_QUEUE_ID_TPC_3_2 = 55, /* internal */ |
| GAUDI_QUEUE_ID_TPC_3_3 = 56, /* internal */ |
| GAUDI_QUEUE_ID_TPC_4_0 = 57, /* internal */ |
| GAUDI_QUEUE_ID_TPC_4_1 = 58, /* internal */ |
| GAUDI_QUEUE_ID_TPC_4_2 = 59, /* internal */ |
| GAUDI_QUEUE_ID_TPC_4_3 = 60, /* internal */ |
| GAUDI_QUEUE_ID_TPC_5_0 = 61, /* internal */ |
| GAUDI_QUEUE_ID_TPC_5_1 = 62, /* internal */ |
| GAUDI_QUEUE_ID_TPC_5_2 = 63, /* internal */ |
| GAUDI_QUEUE_ID_TPC_5_3 = 64, /* internal */ |
| GAUDI_QUEUE_ID_TPC_6_0 = 65, /* internal */ |
| GAUDI_QUEUE_ID_TPC_6_1 = 66, /* internal */ |
| GAUDI_QUEUE_ID_TPC_6_2 = 67, /* internal */ |
| GAUDI_QUEUE_ID_TPC_6_3 = 68, /* internal */ |
| GAUDI_QUEUE_ID_TPC_7_0 = 69, /* internal */ |
| GAUDI_QUEUE_ID_TPC_7_1 = 70, /* internal */ |
| GAUDI_QUEUE_ID_TPC_7_2 = 71, /* internal */ |
| GAUDI_QUEUE_ID_TPC_7_3 = 72, /* internal */ |
| GAUDI_QUEUE_ID_NIC_0_0 = 73, /* internal */ |
| GAUDI_QUEUE_ID_NIC_0_1 = 74, /* internal */ |
| GAUDI_QUEUE_ID_NIC_0_2 = 75, /* internal */ |
| GAUDI_QUEUE_ID_NIC_0_3 = 76, /* internal */ |
| GAUDI_QUEUE_ID_NIC_1_0 = 77, /* internal */ |
| GAUDI_QUEUE_ID_NIC_1_1 = 78, /* internal */ |
| GAUDI_QUEUE_ID_NIC_1_2 = 79, /* internal */ |
| GAUDI_QUEUE_ID_NIC_1_3 = 80, /* internal */ |
| GAUDI_QUEUE_ID_NIC_2_0 = 81, /* internal */ |
| GAUDI_QUEUE_ID_NIC_2_1 = 82, /* internal */ |
| GAUDI_QUEUE_ID_NIC_2_2 = 83, /* internal */ |
| GAUDI_QUEUE_ID_NIC_2_3 = 84, /* internal */ |
| GAUDI_QUEUE_ID_NIC_3_0 = 85, /* internal */ |
| GAUDI_QUEUE_ID_NIC_3_1 = 86, /* internal */ |
| GAUDI_QUEUE_ID_NIC_3_2 = 87, /* internal */ |
| GAUDI_QUEUE_ID_NIC_3_3 = 88, /* internal */ |
| GAUDI_QUEUE_ID_NIC_4_0 = 89, /* internal */ |
| GAUDI_QUEUE_ID_NIC_4_1 = 90, /* internal */ |
| GAUDI_QUEUE_ID_NIC_4_2 = 91, /* internal */ |
| GAUDI_QUEUE_ID_NIC_4_3 = 92, /* internal */ |
| GAUDI_QUEUE_ID_NIC_5_0 = 93, /* internal */ |
| GAUDI_QUEUE_ID_NIC_5_1 = 94, /* internal */ |
| GAUDI_QUEUE_ID_NIC_5_2 = 95, /* internal */ |
| GAUDI_QUEUE_ID_NIC_5_3 = 96, /* internal */ |
| GAUDI_QUEUE_ID_NIC_6_0 = 97, /* internal */ |
| GAUDI_QUEUE_ID_NIC_6_1 = 98, /* internal */ |
| GAUDI_QUEUE_ID_NIC_6_2 = 99, /* internal */ |
| GAUDI_QUEUE_ID_NIC_6_3 = 100, /* internal */ |
| GAUDI_QUEUE_ID_NIC_7_0 = 101, /* internal */ |
| GAUDI_QUEUE_ID_NIC_7_1 = 102, /* internal */ |
| GAUDI_QUEUE_ID_NIC_7_2 = 103, /* internal */ |
| GAUDI_QUEUE_ID_NIC_7_3 = 104, /* internal */ |
| GAUDI_QUEUE_ID_NIC_8_0 = 105, /* internal */ |
| GAUDI_QUEUE_ID_NIC_8_1 = 106, /* internal */ |
| GAUDI_QUEUE_ID_NIC_8_2 = 107, /* internal */ |
| GAUDI_QUEUE_ID_NIC_8_3 = 108, /* internal */ |
| GAUDI_QUEUE_ID_NIC_9_0 = 109, /* internal */ |
| GAUDI_QUEUE_ID_NIC_9_1 = 110, /* internal */ |
| GAUDI_QUEUE_ID_NIC_9_2 = 111, /* internal */ |
| GAUDI_QUEUE_ID_NIC_9_3 = 112, /* internal */ |
| GAUDI_QUEUE_ID_SIZE |
| }; |
| |
| /* |
| * In GAUDI2 we have two modes of operation in regard to queues: |
| * 1. Legacy mode, where each QMAN exposes 4 streams to the user |
| * 2. F/W mode, where we use F/W to schedule the JOBS to the different queues. |
| * |
| * When in legacy mode, the user sends the queue id per JOB according to |
| * enum gaudi2_queue_id below. |
| * |
| * When in F/W mode, the user sends a stream id per Command Submission. The |
| * stream id is a running number from 0 up to (N-1), where N is the number |
| * of streams the F/W exposes and is passed to the user in |
| * struct hl_info_hw_ip_info |
| */ |
| |
| enum gaudi2_queue_id { |
| GAUDI2_QUEUE_ID_PDMA_0_0 = 0, |
| GAUDI2_QUEUE_ID_PDMA_0_1 = 1, |
| GAUDI2_QUEUE_ID_PDMA_0_2 = 2, |
| GAUDI2_QUEUE_ID_PDMA_0_3 = 3, |
| GAUDI2_QUEUE_ID_PDMA_1_0 = 4, |
| GAUDI2_QUEUE_ID_PDMA_1_1 = 5, |
| GAUDI2_QUEUE_ID_PDMA_1_2 = 6, |
| GAUDI2_QUEUE_ID_PDMA_1_3 = 7, |
| GAUDI2_QUEUE_ID_DCORE0_EDMA_0_0 = 8, |
| GAUDI2_QUEUE_ID_DCORE0_EDMA_0_1 = 9, |
| GAUDI2_QUEUE_ID_DCORE0_EDMA_0_2 = 10, |
| GAUDI2_QUEUE_ID_DCORE0_EDMA_0_3 = 11, |
| GAUDI2_QUEUE_ID_DCORE0_EDMA_1_0 = 12, |
| GAUDI2_QUEUE_ID_DCORE0_EDMA_1_1 = 13, |
| GAUDI2_QUEUE_ID_DCORE0_EDMA_1_2 = 14, |
| GAUDI2_QUEUE_ID_DCORE0_EDMA_1_3 = 15, |
| GAUDI2_QUEUE_ID_DCORE0_MME_0_0 = 16, |
| GAUDI2_QUEUE_ID_DCORE0_MME_0_1 = 17, |
| GAUDI2_QUEUE_ID_DCORE0_MME_0_2 = 18, |
| GAUDI2_QUEUE_ID_DCORE0_MME_0_3 = 19, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_0_0 = 20, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_0_1 = 21, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_0_2 = 22, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_0_3 = 23, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_1_0 = 24, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_1_1 = 25, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_1_2 = 26, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_1_3 = 27, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_2_0 = 28, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_2_1 = 29, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_2_2 = 30, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_2_3 = 31, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_3_0 = 32, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_3_1 = 33, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_3_2 = 34, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_3_3 = 35, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_4_0 = 36, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_4_1 = 37, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_4_2 = 38, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_4_3 = 39, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_5_0 = 40, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_5_1 = 41, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_5_2 = 42, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_5_3 = 43, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_6_0 = 44, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_6_1 = 45, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_6_2 = 46, |
| GAUDI2_QUEUE_ID_DCORE0_TPC_6_3 = 47, |
| GAUDI2_QUEUE_ID_DCORE1_EDMA_0_0 = 48, |
| GAUDI2_QUEUE_ID_DCORE1_EDMA_0_1 = 49, |
| GAUDI2_QUEUE_ID_DCORE1_EDMA_0_2 = 50, |
| GAUDI2_QUEUE_ID_DCORE1_EDMA_0_3 = 51, |
| GAUDI2_QUEUE_ID_DCORE1_EDMA_1_0 = 52, |
| GAUDI2_QUEUE_ID_DCORE1_EDMA_1_1 = 53, |
| GAUDI2_QUEUE_ID_DCORE1_EDMA_1_2 = 54, |
| GAUDI2_QUEUE_ID_DCORE1_EDMA_1_3 = 55, |
| GAUDI2_QUEUE_ID_DCORE1_MME_0_0 = 56, |
| GAUDI2_QUEUE_ID_DCORE1_MME_0_1 = 57, |
| GAUDI2_QUEUE_ID_DCORE1_MME_0_2 = 58, |
| GAUDI2_QUEUE_ID_DCORE1_MME_0_3 = 59, |
| GAUDI2_QUEUE_ID_DCORE1_TPC_0_0 = 60, |
| GAUDI2_QUEUE_ID_DCORE1_TPC_0_1 = 61, |
| GAUDI2_QUEUE_ID_DCORE1_TPC_0_2 = 62, |
| GAUDI2_QUEUE_ID_DCORE1_TPC_0_3 = 63, |
| GAUDI2_QUEUE_ID_DCORE1_TPC_1_0 = 64, |
| GAUDI2_QUEUE_ID_DCORE1_TPC_1_1 = 65, |
| GAUDI2_QUEUE_ID_DCORE1_TPC_1_2 = 66, |
| GAUDI2_QUEUE_ID_DCORE1_TPC_1_3 = 67, |
| GAUDI2_QUEUE_ID_DCORE1_TPC_2_0 = 68, |
| GAUDI2_QUEUE_ID_DCORE1_TPC_2_1 = 69, |
| GAUDI2_QUEUE_ID_DCORE1_TPC_2_2 = 70, |
| GAUDI2_QUEUE_ID_DCORE1_TPC_2_3 = 71, |
| GAUDI2_QUEUE_ID_DCORE1_TPC_3_0 = 72, |
| GAUDI2_QUEUE_ID_DCORE1_TPC_3_1 = 73, |
| GAUDI2_QUEUE_ID_DCORE1_TPC_3_2 = 74, |
| GAUDI2_QUEUE_ID_DCORE1_TPC_3_3 = 75, |
| GAUDI2_QUEUE_ID_DCORE1_TPC_4_0 = 76, |
| GAUDI2_QUEUE_ID_DCORE1_TPC_4_1 = 77, |
| GAUDI2_QUEUE_ID_DCORE1_TPC_4_2 = 78, |
| GAUDI2_QUEUE_ID_DCORE1_TPC_4_3 = 79, |
| GAUDI2_QUEUE_ID_DCORE1_TPC_5_0 = 80, |
| GAUDI2_QUEUE_ID_DCORE1_TPC_5_1 = 81, |
| GAUDI2_QUEUE_ID_DCORE1_TPC_5_2 = 82, |
| GAUDI2_QUEUE_ID_DCORE1_TPC_5_3 = 83, |
| GAUDI2_QUEUE_ID_DCORE2_EDMA_0_0 = 84, |
| GAUDI2_QUEUE_ID_DCORE2_EDMA_0_1 = 85, |
| GAUDI2_QUEUE_ID_DCORE2_EDMA_0_2 = 86, |
| GAUDI2_QUEUE_ID_DCORE2_EDMA_0_3 = 87, |
| GAUDI2_QUEUE_ID_DCORE2_EDMA_1_0 = 88, |
| GAUDI2_QUEUE_ID_DCORE2_EDMA_1_1 = 89, |
| GAUDI2_QUEUE_ID_DCORE2_EDMA_1_2 = 90, |
| GAUDI2_QUEUE_ID_DCORE2_EDMA_1_3 = 91, |
| GAUDI2_QUEUE_ID_DCORE2_MME_0_0 = 92, |
| GAUDI2_QUEUE_ID_DCORE2_MME_0_1 = 93, |
| GAUDI2_QUEUE_ID_DCORE2_MME_0_2 = 94, |
| GAUDI2_QUEUE_ID_DCORE2_MME_0_3 = 95, |
| GAUDI2_QUEUE_ID_DCORE2_TPC_0_0 = 96, |
| GAUDI2_QUEUE_ID_DCORE2_TPC_0_1 = 97, |
| GAUDI2_QUEUE_ID_DCORE2_TPC_0_2 = 98, |
| GAUDI2_QUEUE_ID_DCORE2_TPC_0_3 = 99, |
| GAUDI2_QUEUE_ID_DCORE2_TPC_1_0 = 100, |
| GAUDI2_QUEUE_ID_DCORE2_TPC_1_1 = 101, |
| GAUDI2_QUEUE_ID_DCORE2_TPC_1_2 = 102, |
| GAUDI2_QUEUE_ID_DCORE2_TPC_1_3 = 103, |
| GAUDI2_QUEUE_ID_DCORE2_TPC_2_0 = 104, |
| GAUDI2_QUEUE_ID_DCORE2_TPC_2_1 = 105, |
| GAUDI2_QUEUE_ID_DCORE2_TPC_2_2 = 106, |
| GAUDI2_QUEUE_ID_DCORE2_TPC_2_3 = 107, |
| GAUDI2_QUEUE_ID_DCORE2_TPC_3_0 = 108, |
| GAUDI2_QUEUE_ID_DCORE2_TPC_3_1 = 109, |
| GAUDI2_QUEUE_ID_DCORE2_TPC_3_2 = 110, |
| GAUDI2_QUEUE_ID_DCORE2_TPC_3_3 = 111, |
| GAUDI2_QUEUE_ID_DCORE2_TPC_4_0 = 112, |
| GAUDI2_QUEUE_ID_DCORE2_TPC_4_1 = 113, |
| GAUDI2_QUEUE_ID_DCORE2_TPC_4_2 = 114, |
| GAUDI2_QUEUE_ID_DCORE2_TPC_4_3 = 115, |
| GAUDI2_QUEUE_ID_DCORE2_TPC_5_0 = 116, |
| GAUDI2_QUEUE_ID_DCORE2_TPC_5_1 = 117, |
| GAUDI2_QUEUE_ID_DCORE2_TPC_5_2 = 118, |
| GAUDI2_QUEUE_ID_DCORE2_TPC_5_3 = 119, |
| GAUDI2_QUEUE_ID_DCORE3_EDMA_0_0 = 120, |
| GAUDI2_QUEUE_ID_DCORE3_EDMA_0_1 = 121, |
| GAUDI2_QUEUE_ID_DCORE3_EDMA_0_2 = 122, |
| GAUDI2_QUEUE_ID_DCORE3_EDMA_0_3 = 123, |
| GAUDI2_QUEUE_ID_DCORE3_EDMA_1_0 = 124, |
| GAUDI2_QUEUE_ID_DCORE3_EDMA_1_1 = 125, |
| GAUDI2_QUEUE_ID_DCORE3_EDMA_1_2 = 126, |
| GAUDI2_QUEUE_ID_DCORE3_EDMA_1_3 = 127, |
| GAUDI2_QUEUE_ID_DCORE3_MME_0_0 = 128, |
| GAUDI2_QUEUE_ID_DCORE3_MME_0_1 = 129, |
| GAUDI2_QUEUE_ID_DCORE3_MME_0_2 = 130, |
| GAUDI2_QUEUE_ID_DCORE3_MME_0_3 = 131, |
| GAUDI2_QUEUE_ID_DCORE3_TPC_0_0 = 132, |
| GAUDI2_QUEUE_ID_DCORE3_TPC_0_1 = 133, |
| GAUDI2_QUEUE_ID_DCORE3_TPC_0_2 = 134, |
| GAUDI2_QUEUE_ID_DCORE3_TPC_0_3 = 135, |
| GAUDI2_QUEUE_ID_DCORE3_TPC_1_0 = 136, |
| GAUDI2_QUEUE_ID_DCORE3_TPC_1_1 = 137, |
| GAUDI2_QUEUE_ID_DCORE3_TPC_1_2 = 138, |
| GAUDI2_QUEUE_ID_DCORE3_TPC_1_3 = 139, |
| GAUDI2_QUEUE_ID_DCORE3_TPC_2_0 = 140, |
| GAUDI2_QUEUE_ID_DCORE3_TPC_2_1 = 141, |
| GAUDI2_QUEUE_ID_DCORE3_TPC_2_2 = 142, |
| GAUDI2_QUEUE_ID_DCORE3_TPC_2_3 = 143, |
| GAUDI2_QUEUE_ID_DCORE3_TPC_3_0 = 144, |
| GAUDI2_QUEUE_ID_DCORE3_TPC_3_1 = 145, |
| GAUDI2_QUEUE_ID_DCORE3_TPC_3_2 = 146, |
| GAUDI2_QUEUE_ID_DCORE3_TPC_3_3 = 147, |
| GAUDI2_QUEUE_ID_DCORE3_TPC_4_0 = 148, |
| GAUDI2_QUEUE_ID_DCORE3_TPC_4_1 = 149, |
| GAUDI2_QUEUE_ID_DCORE3_TPC_4_2 = 150, |
| GAUDI2_QUEUE_ID_DCORE3_TPC_4_3 = 151, |
| GAUDI2_QUEUE_ID_DCORE3_TPC_5_0 = 152, |
| GAUDI2_QUEUE_ID_DCORE3_TPC_5_1 = 153, |
| GAUDI2_QUEUE_ID_DCORE3_TPC_5_2 = 154, |
| GAUDI2_QUEUE_ID_DCORE3_TPC_5_3 = 155, |
| GAUDI2_QUEUE_ID_NIC_0_0 = 156, |
| GAUDI2_QUEUE_ID_NIC_0_1 = 157, |
| GAUDI2_QUEUE_ID_NIC_0_2 = 158, |
| GAUDI2_QUEUE_ID_NIC_0_3 = 159, |
| GAUDI2_QUEUE_ID_NIC_1_0 = 160, |
| GAUDI2_QUEUE_ID_NIC_1_1 = 161, |
| GAUDI2_QUEUE_ID_NIC_1_2 = 162, |
| GAUDI2_QUEUE_ID_NIC_1_3 = 163, |
| GAUDI2_QUEUE_ID_NIC_2_0 = 164, |
| GAUDI2_QUEUE_ID_NIC_2_1 = 165, |
| GAUDI2_QUEUE_ID_NIC_2_2 = 166, |
| GAUDI2_QUEUE_ID_NIC_2_3 = 167, |
| GAUDI2_QUEUE_ID_NIC_3_0 = 168, |
| GAUDI2_QUEUE_ID_NIC_3_1 = 169, |
| GAUDI2_QUEUE_ID_NIC_3_2 = 170, |
| GAUDI2_QUEUE_ID_NIC_3_3 = 171, |
| GAUDI2_QUEUE_ID_NIC_4_0 = 172, |
| GAUDI2_QUEUE_ID_NIC_4_1 = 173, |
| GAUDI2_QUEUE_ID_NIC_4_2 = 174, |
| GAUDI2_QUEUE_ID_NIC_4_3 = 175, |
| GAUDI2_QUEUE_ID_NIC_5_0 = 176, |
| GAUDI2_QUEUE_ID_NIC_5_1 = 177, |
| GAUDI2_QUEUE_ID_NIC_5_2 = 178, |
| GAUDI2_QUEUE_ID_NIC_5_3 = 179, |
| GAUDI2_QUEUE_ID_NIC_6_0 = 180, |
| GAUDI2_QUEUE_ID_NIC_6_1 = 181, |
| GAUDI2_QUEUE_ID_NIC_6_2 = 182, |
| GAUDI2_QUEUE_ID_NIC_6_3 = 183, |
| GAUDI2_QUEUE_ID_NIC_7_0 = 184, |
| GAUDI2_QUEUE_ID_NIC_7_1 = 185, |
| GAUDI2_QUEUE_ID_NIC_7_2 = 186, |
| GAUDI2_QUEUE_ID_NIC_7_3 = 187, |
| GAUDI2_QUEUE_ID_NIC_8_0 = 188, |
| GAUDI2_QUEUE_ID_NIC_8_1 = 189, |
| GAUDI2_QUEUE_ID_NIC_8_2 = 190, |
| GAUDI2_QUEUE_ID_NIC_8_3 = 191, |
| GAUDI2_QUEUE_ID_NIC_9_0 = 192, |
| GAUDI2_QUEUE_ID_NIC_9_1 = 193, |
| GAUDI2_QUEUE_ID_NIC_9_2 = 194, |
| GAUDI2_QUEUE_ID_NIC_9_3 = 195, |
| GAUDI2_QUEUE_ID_NIC_10_0 = 196, |
| GAUDI2_QUEUE_ID_NIC_10_1 = 197, |
| GAUDI2_QUEUE_ID_NIC_10_2 = 198, |
| GAUDI2_QUEUE_ID_NIC_10_3 = 199, |
| GAUDI2_QUEUE_ID_NIC_11_0 = 200, |
| GAUDI2_QUEUE_ID_NIC_11_1 = 201, |
| GAUDI2_QUEUE_ID_NIC_11_2 = 202, |
| GAUDI2_QUEUE_ID_NIC_11_3 = 203, |
| GAUDI2_QUEUE_ID_NIC_12_0 = 204, |
| GAUDI2_QUEUE_ID_NIC_12_1 = 205, |
| GAUDI2_QUEUE_ID_NIC_12_2 = 206, |
| GAUDI2_QUEUE_ID_NIC_12_3 = 207, |
| GAUDI2_QUEUE_ID_NIC_13_0 = 208, |
| GAUDI2_QUEUE_ID_NIC_13_1 = 209, |
| GAUDI2_QUEUE_ID_NIC_13_2 = 210, |
| GAUDI2_QUEUE_ID_NIC_13_3 = 211, |
| GAUDI2_QUEUE_ID_NIC_14_0 = 212, |
| GAUDI2_QUEUE_ID_NIC_14_1 = 213, |
| GAUDI2_QUEUE_ID_NIC_14_2 = 214, |
| GAUDI2_QUEUE_ID_NIC_14_3 = 215, |
| GAUDI2_QUEUE_ID_NIC_15_0 = 216, |
| GAUDI2_QUEUE_ID_NIC_15_1 = 217, |
| GAUDI2_QUEUE_ID_NIC_15_2 = 218, |
| GAUDI2_QUEUE_ID_NIC_15_3 = 219, |
| GAUDI2_QUEUE_ID_NIC_16_0 = 220, |
| GAUDI2_QUEUE_ID_NIC_16_1 = 221, |
| GAUDI2_QUEUE_ID_NIC_16_2 = 222, |
| GAUDI2_QUEUE_ID_NIC_16_3 = 223, |
| GAUDI2_QUEUE_ID_NIC_17_0 = 224, |
| GAUDI2_QUEUE_ID_NIC_17_1 = 225, |
| GAUDI2_QUEUE_ID_NIC_17_2 = 226, |
| GAUDI2_QUEUE_ID_NIC_17_3 = 227, |
| GAUDI2_QUEUE_ID_NIC_18_0 = 228, |
| GAUDI2_QUEUE_ID_NIC_18_1 = 229, |
| GAUDI2_QUEUE_ID_NIC_18_2 = 230, |
| GAUDI2_QUEUE_ID_NIC_18_3 = 231, |
| GAUDI2_QUEUE_ID_NIC_19_0 = 232, |
| GAUDI2_QUEUE_ID_NIC_19_1 = 233, |
| GAUDI2_QUEUE_ID_NIC_19_2 = 234, |
| GAUDI2_QUEUE_ID_NIC_19_3 = 235, |
| GAUDI2_QUEUE_ID_NIC_20_0 = 236, |
| GAUDI2_QUEUE_ID_NIC_20_1 = 237, |
| GAUDI2_QUEUE_ID_NIC_20_2 = 238, |
| GAUDI2_QUEUE_ID_NIC_20_3 = 239, |
| GAUDI2_QUEUE_ID_NIC_21_0 = 240, |
| GAUDI2_QUEUE_ID_NIC_21_1 = 241, |
| GAUDI2_QUEUE_ID_NIC_21_2 = 242, |
| GAUDI2_QUEUE_ID_NIC_21_3 = 243, |
| GAUDI2_QUEUE_ID_NIC_22_0 = 244, |
| GAUDI2_QUEUE_ID_NIC_22_1 = 245, |
| GAUDI2_QUEUE_ID_NIC_22_2 = 246, |
| GAUDI2_QUEUE_ID_NIC_22_3 = 247, |
| GAUDI2_QUEUE_ID_NIC_23_0 = 248, |
| GAUDI2_QUEUE_ID_NIC_23_1 = 249, |
| GAUDI2_QUEUE_ID_NIC_23_2 = 250, |
| GAUDI2_QUEUE_ID_NIC_23_3 = 251, |
| GAUDI2_QUEUE_ID_ROT_0_0 = 252, |
| GAUDI2_QUEUE_ID_ROT_0_1 = 253, |
| GAUDI2_QUEUE_ID_ROT_0_2 = 254, |
| GAUDI2_QUEUE_ID_ROT_0_3 = 255, |
| GAUDI2_QUEUE_ID_ROT_1_0 = 256, |
| GAUDI2_QUEUE_ID_ROT_1_1 = 257, |
| GAUDI2_QUEUE_ID_ROT_1_2 = 258, |
| GAUDI2_QUEUE_ID_ROT_1_3 = 259, |
| GAUDI2_QUEUE_ID_CPU_PQ = 260, |
| GAUDI2_QUEUE_ID_SIZE |
| }; |
| |
| /* |
| * Engine Numbering |
| * |
| * Used in the "busy_engines_mask" field in `struct hl_info_hw_idle' |
| */ |
| |
| enum goya_engine_id { |
| GOYA_ENGINE_ID_DMA_0 = 0, |
| GOYA_ENGINE_ID_DMA_1, |
| GOYA_ENGINE_ID_DMA_2, |
| GOYA_ENGINE_ID_DMA_3, |
| GOYA_ENGINE_ID_DMA_4, |
| GOYA_ENGINE_ID_MME_0, |
| GOYA_ENGINE_ID_TPC_0, |
| GOYA_ENGINE_ID_TPC_1, |
| GOYA_ENGINE_ID_TPC_2, |
| GOYA_ENGINE_ID_TPC_3, |
| GOYA_ENGINE_ID_TPC_4, |
| GOYA_ENGINE_ID_TPC_5, |
| GOYA_ENGINE_ID_TPC_6, |
| GOYA_ENGINE_ID_TPC_7, |
| GOYA_ENGINE_ID_SIZE |
| }; |
| |
| enum gaudi_engine_id { |
| GAUDI_ENGINE_ID_DMA_0 = 0, |
| GAUDI_ENGINE_ID_DMA_1, |
| GAUDI_ENGINE_ID_DMA_2, |
| GAUDI_ENGINE_ID_DMA_3, |
| GAUDI_ENGINE_ID_DMA_4, |
| GAUDI_ENGINE_ID_DMA_5, |
| GAUDI_ENGINE_ID_DMA_6, |
| GAUDI_ENGINE_ID_DMA_7, |
| GAUDI_ENGINE_ID_MME_0, |
| GAUDI_ENGINE_ID_MME_1, |
| GAUDI_ENGINE_ID_MME_2, |
| GAUDI_ENGINE_ID_MME_3, |
| GAUDI_ENGINE_ID_TPC_0, |
| GAUDI_ENGINE_ID_TPC_1, |
| GAUDI_ENGINE_ID_TPC_2, |
| GAUDI_ENGINE_ID_TPC_3, |
| GAUDI_ENGINE_ID_TPC_4, |
| GAUDI_ENGINE_ID_TPC_5, |
| GAUDI_ENGINE_ID_TPC_6, |
| GAUDI_ENGINE_ID_TPC_7, |
| GAUDI_ENGINE_ID_NIC_0, |
| GAUDI_ENGINE_ID_NIC_1, |
| GAUDI_ENGINE_ID_NIC_2, |
| GAUDI_ENGINE_ID_NIC_3, |
| GAUDI_ENGINE_ID_NIC_4, |
| GAUDI_ENGINE_ID_NIC_5, |
| GAUDI_ENGINE_ID_NIC_6, |
| GAUDI_ENGINE_ID_NIC_7, |
| GAUDI_ENGINE_ID_NIC_8, |
| GAUDI_ENGINE_ID_NIC_9, |
| GAUDI_ENGINE_ID_SIZE |
| }; |
| |
| enum gaudi2_engine_id { |
| GAUDI2_DCORE0_ENGINE_ID_EDMA_0 = 0, |
| GAUDI2_DCORE0_ENGINE_ID_EDMA_1, |
| GAUDI2_DCORE0_ENGINE_ID_MME, |
| GAUDI2_DCORE0_ENGINE_ID_TPC_0, |
| GAUDI2_DCORE0_ENGINE_ID_TPC_1, |
| GAUDI2_DCORE0_ENGINE_ID_TPC_2, |
| GAUDI2_DCORE0_ENGINE_ID_TPC_3, |
| GAUDI2_DCORE0_ENGINE_ID_TPC_4, |
| GAUDI2_DCORE0_ENGINE_ID_TPC_5, |
| GAUDI2_DCORE0_ENGINE_ID_DEC_0, |
| GAUDI2_DCORE0_ENGINE_ID_DEC_1, |
| GAUDI2_DCORE1_ENGINE_ID_EDMA_0, |
| GAUDI2_DCORE1_ENGINE_ID_EDMA_1, |
| GAUDI2_DCORE1_ENGINE_ID_MME, |
| GAUDI2_DCORE1_ENGINE_ID_TPC_0, |
| GAUDI2_DCORE1_ENGINE_ID_TPC_1, |
| GAUDI2_DCORE1_ENGINE_ID_TPC_2, |
| GAUDI2_DCORE1_ENGINE_ID_TPC_3, |
| GAUDI2_DCORE1_ENGINE_ID_TPC_4, |
| GAUDI2_DCORE1_ENGINE_ID_TPC_5, |
| GAUDI2_DCORE1_ENGINE_ID_DEC_0, |
| GAUDI2_DCORE1_ENGINE_ID_DEC_1, |
| GAUDI2_DCORE2_ENGINE_ID_EDMA_0, |
| GAUDI2_DCORE2_ENGINE_ID_EDMA_1, |
| GAUDI2_DCORE2_ENGINE_ID_MME, |
| GAUDI2_DCORE2_ENGINE_ID_TPC_0, |
| GAUDI2_DCORE2_ENGINE_ID_TPC_1, |
| GAUDI2_DCORE2_ENGINE_ID_TPC_2, |
| GAUDI2_DCORE2_ENGINE_ID_TPC_3, |
| GAUDI2_DCORE2_ENGINE_ID_TPC_4, |
| GAUDI2_DCORE2_ENGINE_ID_TPC_5, |
| GAUDI2_DCORE2_ENGINE_ID_DEC_0, |
| GAUDI2_DCORE2_ENGINE_ID_DEC_1, |
| GAUDI2_DCORE3_ENGINE_ID_EDMA_0, |
| GAUDI2_DCORE3_ENGINE_ID_EDMA_1, |
| GAUDI2_DCORE3_ENGINE_ID_MME, |
| GAUDI2_DCORE3_ENGINE_ID_TPC_0, |
| GAUDI2_DCORE3_ENGINE_ID_TPC_1, |
| GAUDI2_DCORE3_ENGINE_ID_TPC_2, |
| GAUDI2_DCORE3_ENGINE_ID_TPC_3, |
| GAUDI2_DCORE3_ENGINE_ID_TPC_4, |
| GAUDI2_DCORE3_ENGINE_ID_TPC_5, |
| GAUDI2_DCORE3_ENGINE_ID_DEC_0, |
| GAUDI2_DCORE3_ENGINE_ID_DEC_1, |
| GAUDI2_DCORE0_ENGINE_ID_TPC_6, |
| GAUDI2_ENGINE_ID_PDMA_0, |
| GAUDI2_ENGINE_ID_PDMA_1, |
| GAUDI2_ENGINE_ID_ROT_0, |
| GAUDI2_ENGINE_ID_ROT_1, |
| GAUDI2_PCIE_ENGINE_ID_DEC_0, |
| GAUDI2_PCIE_ENGINE_ID_DEC_1, |
| GAUDI2_ENGINE_ID_NIC0_0, |
| GAUDI2_ENGINE_ID_NIC0_1, |
| GAUDI2_ENGINE_ID_NIC1_0, |
| GAUDI2_ENGINE_ID_NIC1_1, |
| GAUDI2_ENGINE_ID_NIC2_0, |
| GAUDI2_ENGINE_ID_NIC2_1, |
| GAUDI2_ENGINE_ID_NIC3_0, |
| GAUDI2_ENGINE_ID_NIC3_1, |
| GAUDI2_ENGINE_ID_NIC4_0, |
| GAUDI2_ENGINE_ID_NIC4_1, |
| GAUDI2_ENGINE_ID_NIC5_0, |
| GAUDI2_ENGINE_ID_NIC5_1, |
| GAUDI2_ENGINE_ID_NIC6_0, |
| GAUDI2_ENGINE_ID_NIC6_1, |
| GAUDI2_ENGINE_ID_NIC7_0, |
| GAUDI2_ENGINE_ID_NIC7_1, |
| GAUDI2_ENGINE_ID_NIC8_0, |
| GAUDI2_ENGINE_ID_NIC8_1, |
| GAUDI2_ENGINE_ID_NIC9_0, |
| GAUDI2_ENGINE_ID_NIC9_1, |
| GAUDI2_ENGINE_ID_NIC10_0, |
| GAUDI2_ENGINE_ID_NIC10_1, |
| GAUDI2_ENGINE_ID_NIC11_0, |
| GAUDI2_ENGINE_ID_NIC11_1, |
| GAUDI2_ENGINE_ID_SIZE |
| }; |
| |
| /* |
| * ASIC specific PLL index |
| * |
| * Used to retrieve in frequency info of different IPs via |
| * HL_INFO_PLL_FREQUENCY under HL_IOCTL_INFO IOCTL. The enums need to be |
| * used as an index in struct hl_pll_frequency_info |
| */ |
| |
| enum hl_goya_pll_index { |
| HL_GOYA_CPU_PLL = 0, |
| HL_GOYA_IC_PLL, |
| HL_GOYA_MC_PLL, |
| HL_GOYA_MME_PLL, |
| HL_GOYA_PCI_PLL, |
| HL_GOYA_EMMC_PLL, |
| HL_GOYA_TPC_PLL, |
| HL_GOYA_PLL_MAX |
| }; |
| |
| enum hl_gaudi_pll_index { |
| HL_GAUDI_CPU_PLL = 0, |
| HL_GAUDI_PCI_PLL, |
| HL_GAUDI_SRAM_PLL, |
| HL_GAUDI_HBM_PLL, |
| HL_GAUDI_NIC_PLL, |
| HL_GAUDI_DMA_PLL, |
| HL_GAUDI_MESH_PLL, |
| HL_GAUDI_MME_PLL, |
| HL_GAUDI_TPC_PLL, |
| HL_GAUDI_IF_PLL, |
| HL_GAUDI_PLL_MAX |
| }; |
| |
| enum hl_gaudi2_pll_index { |
| HL_GAUDI2_CPU_PLL = 0, |
| HL_GAUDI2_PCI_PLL, |
| HL_GAUDI2_SRAM_PLL, |
| HL_GAUDI2_HBM_PLL, |
| HL_GAUDI2_NIC_PLL, |
| HL_GAUDI2_DMA_PLL, |
| HL_GAUDI2_MESH_PLL, |
| HL_GAUDI2_MME_PLL, |
| HL_GAUDI2_TPC_PLL, |
| HL_GAUDI2_IF_PLL, |
| HL_GAUDI2_VID_PLL, |
| HL_GAUDI2_MSS_PLL, |
| HL_GAUDI2_PLL_MAX |
| }; |
| |
| /** |
| * enum hl_goya_dma_direction - Direction of DMA operation inside a LIN_DMA packet that is |
| * submitted to the GOYA's DMA QMAN. This attribute is not relevant |
| * to the H/W but the kernel driver use it to parse the packet's |
| * addresses and patch/validate them. |
| * @HL_DMA_HOST_TO_DRAM: DMA operation from Host memory to GOYA's DDR. |
| * @HL_DMA_HOST_TO_SRAM: DMA operation from Host memory to GOYA's SRAM. |
| * @HL_DMA_DRAM_TO_SRAM: DMA operation from GOYA's DDR to GOYA's SRAM. |
| * @HL_DMA_SRAM_TO_DRAM: DMA operation from GOYA's SRAM to GOYA's DDR. |
| * @HL_DMA_SRAM_TO_HOST: DMA operation from GOYA's SRAM to Host memory. |
| * @HL_DMA_DRAM_TO_HOST: DMA operation from GOYA's DDR to Host memory. |
| * @HL_DMA_DRAM_TO_DRAM: DMA operation from GOYA's DDR to GOYA's DDR. |
| * @HL_DMA_SRAM_TO_SRAM: DMA operation from GOYA's SRAM to GOYA's SRAM. |
| * @HL_DMA_ENUM_MAX: number of values in enum |
| */ |
| enum hl_goya_dma_direction { |
| HL_DMA_HOST_TO_DRAM, |
| HL_DMA_HOST_TO_SRAM, |
| HL_DMA_DRAM_TO_SRAM, |
| HL_DMA_SRAM_TO_DRAM, |
| HL_DMA_SRAM_TO_HOST, |
| HL_DMA_DRAM_TO_HOST, |
| HL_DMA_DRAM_TO_DRAM, |
| HL_DMA_SRAM_TO_SRAM, |
| HL_DMA_ENUM_MAX |
| }; |
| |
| /** |
| * enum hl_device_status - Device status information. |
| * @HL_DEVICE_STATUS_OPERATIONAL: Device is operational. |
| * @HL_DEVICE_STATUS_IN_RESET: Device is currently during reset. |
| * @HL_DEVICE_STATUS_MALFUNCTION: Device is unusable. |
| * @HL_DEVICE_STATUS_NEEDS_RESET: Device needs reset because auto reset was disabled. |
| * @HL_DEVICE_STATUS_IN_DEVICE_CREATION: Device is operational but its creation is still in |
| * progress. |
| * @HL_DEVICE_STATUS_IN_RESET_AFTER_DEVICE_RELEASE: Device is currently during reset that was |
| * triggered because the user released the device |
| * @HL_DEVICE_STATUS_LAST: Last status. |
| */ |
| enum hl_device_status { |
| HL_DEVICE_STATUS_OPERATIONAL, |
| HL_DEVICE_STATUS_IN_RESET, |
| HL_DEVICE_STATUS_MALFUNCTION, |
| HL_DEVICE_STATUS_NEEDS_RESET, |
| HL_DEVICE_STATUS_IN_DEVICE_CREATION, |
| HL_DEVICE_STATUS_IN_RESET_AFTER_DEVICE_RELEASE, |
| HL_DEVICE_STATUS_LAST = HL_DEVICE_STATUS_IN_RESET_AFTER_DEVICE_RELEASE |
| }; |
| |
| enum hl_server_type { |
| HL_SERVER_TYPE_UNKNOWN = 0, |
| HL_SERVER_GAUDI_HLS1 = 1, |
| HL_SERVER_GAUDI_HLS1H = 2, |
| HL_SERVER_GAUDI_TYPE1 = 3, |
| HL_SERVER_GAUDI_TYPE2 = 4, |
| HL_SERVER_GAUDI2_HLS2 = 5 |
| }; |
| |
| /* |
| * Notifier event values - for the notification mechanism and the HL_INFO_GET_EVENTS command |
| * |
| * HL_NOTIFIER_EVENT_TPC_ASSERT - Indicates TPC assert event |
| * HL_NOTIFIER_EVENT_UNDEFINED_OPCODE - Indicates undefined operation code |
| * HL_NOTIFIER_EVENT_DEVICE_RESET - Indicates device requires a reset |
| * HL_NOTIFIER_EVENT_CS_TIMEOUT - Indicates CS timeout error |
| * HL_NOTIFIER_EVENT_DEVICE_UNAVAILABLE - Indicates device is unavailable |
| * HL_NOTIFIER_EVENT_USER_ENGINE_ERR - Indicates device engine in error state |
| * HL_NOTIFIER_EVENT_GENERAL_HW_ERR - Indicates device HW error |
| */ |
| #define HL_NOTIFIER_EVENT_TPC_ASSERT (1ULL << 0) |
| #define HL_NOTIFIER_EVENT_UNDEFINED_OPCODE (1ULL << 1) |
| #define HL_NOTIFIER_EVENT_DEVICE_RESET (1ULL << 2) |
| #define HL_NOTIFIER_EVENT_CS_TIMEOUT (1ULL << 3) |
| #define HL_NOTIFIER_EVENT_DEVICE_UNAVAILABLE (1ULL << 4) |
| #define HL_NOTIFIER_EVENT_USER_ENGINE_ERR (1ULL << 5) |
| #define HL_NOTIFIER_EVENT_GENERAL_HW_ERR (1ULL << 6) |
| |
| /* Opcode for management ioctl |
| * |
| * HW_IP_INFO - Receive information about different IP blocks in the |
| * device. |
| * HL_INFO_HW_EVENTS - Receive an array describing how many times each event |
| * occurred since the last hard reset. |
| * HL_INFO_DRAM_USAGE - Retrieve the dram usage inside the device and of the |
| * specific context. This is relevant only for devices |
| * where the dram is managed by the kernel driver |
| * HL_INFO_HW_IDLE - Retrieve information about the idle status of each |
| * internal engine. |
| * HL_INFO_DEVICE_STATUS - Retrieve the device's status. This opcode doesn't |
| * require an open context. |
| * HL_INFO_DEVICE_UTILIZATION - Retrieve the total utilization of the device |
| * over the last period specified by the user. |
| * The period can be between 100ms to 1s, in |
| * resolution of 100ms. The return value is a |
| * percentage of the utilization rate. |
| * HL_INFO_HW_EVENTS_AGGREGATE - Receive an array describing how many times each |
| * event occurred since the driver was loaded. |
| * HL_INFO_CLK_RATE - Retrieve the current and maximum clock rate |
| * of the device in MHz. The maximum clock rate is |
| * configurable via sysfs parameter |
| * HL_INFO_RESET_COUNT - Retrieve the counts of the soft and hard reset |
| * operations performed on the device since the last |
| * time the driver was loaded. |
| * HL_INFO_TIME_SYNC - Retrieve the device's time alongside the host's time |
| * for synchronization. |
| * HL_INFO_CS_COUNTERS - Retrieve command submission counters |
| * HL_INFO_PCI_COUNTERS - Retrieve PCI counters |
| * HL_INFO_CLK_THROTTLE_REASON - Retrieve clock throttling reason |
| * HL_INFO_SYNC_MANAGER - Retrieve sync manager info per dcore |
| * HL_INFO_TOTAL_ENERGY - Retrieve total energy consumption |
| * HL_INFO_PLL_FREQUENCY - Retrieve PLL frequency |
| * HL_INFO_POWER - Retrieve power information |
| * HL_INFO_OPEN_STATS - Retrieve info regarding recent device open calls |
| * HL_INFO_DRAM_REPLACED_ROWS - Retrieve DRAM replaced rows info |
| * HL_INFO_DRAM_PENDING_ROWS - Retrieve DRAM pending rows num |
| * HL_INFO_LAST_ERR_OPEN_DEV_TIME - Retrieve timestamp of the last time the device was opened |
| * and CS timeout or razwi error occurred. |
| * HL_INFO_CS_TIMEOUT_EVENT - Retrieve CS timeout timestamp and its related CS sequence number. |
| * HL_INFO_RAZWI_EVENT - Retrieve parameters of razwi: |
| * Timestamp of razwi. |
| * The address which accessing it caused the razwi. |
| * Razwi initiator. |
| * Razwi cause, was it a page fault or MMU access error. |
| * HL_INFO_DEV_MEM_ALLOC_PAGE_SIZES - Retrieve valid page sizes for device memory allocation |
| * HL_INFO_SECURED_ATTESTATION - Retrieve attestation report of the boot. |
| * HL_INFO_REGISTER_EVENTFD - Register eventfd for event notifications. |
| * HL_INFO_UNREGISTER_EVENTFD - Unregister eventfd |
| * HL_INFO_GET_EVENTS - Retrieve the last occurred events |
| * HL_INFO_UNDEFINED_OPCODE_EVENT - Retrieve last undefined opcode error information. |
| */ |
| #define HL_INFO_HW_IP_INFO 0 |
| #define HL_INFO_HW_EVENTS 1 |
| #define HL_INFO_DRAM_USAGE 2 |
| #define HL_INFO_HW_IDLE 3 |
| #define HL_INFO_DEVICE_STATUS 4 |
| #define HL_INFO_DEVICE_UTILIZATION 6 |
| #define HL_INFO_HW_EVENTS_AGGREGATE 7 |
| #define HL_INFO_CLK_RATE 8 |
| #define HL_INFO_RESET_COUNT 9 |
| #define HL_INFO_TIME_SYNC 10 |
| #define HL_INFO_CS_COUNTERS 11 |
| #define HL_INFO_PCI_COUNTERS 12 |
| #define HL_INFO_CLK_THROTTLE_REASON 13 |
| #define HL_INFO_SYNC_MANAGER 14 |
| #define HL_INFO_TOTAL_ENERGY 15 |
| #define HL_INFO_PLL_FREQUENCY 16 |
| #define HL_INFO_POWER 17 |
| #define HL_INFO_OPEN_STATS 18 |
| #define HL_INFO_DRAM_REPLACED_ROWS 21 |
| #define HL_INFO_DRAM_PENDING_ROWS 22 |
| #define HL_INFO_LAST_ERR_OPEN_DEV_TIME 23 |
| #define HL_INFO_CS_TIMEOUT_EVENT 24 |
| #define HL_INFO_RAZWI_EVENT 25 |
| #define HL_INFO_DEV_MEM_ALLOC_PAGE_SIZES 26 |
| #define HL_INFO_SECURED_ATTESTATION 27 |
| #define HL_INFO_REGISTER_EVENTFD 28 |
| #define HL_INFO_UNREGISTER_EVENTFD 29 |
| #define HL_INFO_GET_EVENTS 30 |
| #define HL_INFO_UNDEFINED_OPCODE_EVENT 31 |
| #define HL_INFO_ENGINE_STATUS 32 |
| |
| #define HL_INFO_VERSION_MAX_LEN 128 |
| #define HL_INFO_CARD_NAME_MAX_LEN 16 |
| |
| /* Maximum buffer size for retrieving engines status */ |
| #define HL_ENGINES_DATA_MAX_SIZE SZ_1M |
| |
| /** |
| * struct hl_info_hw_ip_info - hardware information on various IPs in the ASIC |
| * @sram_base_address: The first SRAM physical base address that is free to be |
| * used by the user. |
| * @dram_base_address: The first DRAM virtual or physical base address that is |
| * free to be used by the user. |
| * @dram_size: The DRAM size that is available to the user. |
| * @sram_size: The SRAM size that is available to the user. |
| * @num_of_events: The number of events that can be received from the f/w. This |
| * is needed so the user can what is the size of the h/w events |
| * array he needs to pass to the kernel when he wants to fetch |
| * the event counters. |
| * @device_id: PCI device ID of the ASIC. |
| * @module_id: Module ID of the ASIC for mezzanine cards in servers |
| * (From OCP spec). |
| * @decoder_enabled_mask: Bit-mask that represents which decoders are enabled. |
| * @first_available_interrupt_id: The first available interrupt ID for the user |
| * to be used when it works with user interrupts. |
| * Relevant for Gaudi2 and later. |
| * @server_type: Server type that the Gaudi ASIC is currently installed in. |
| * The value is according to enum hl_server_type |
| * @cpld_version: CPLD version on the board. |
| * @psoc_pci_pll_nr: PCI PLL NR value. Needed by the profiler in some ASICs. |
| * @psoc_pci_pll_nf: PCI PLL NF value. Needed by the profiler in some ASICs. |
| * @psoc_pci_pll_od: PCI PLL OD value. Needed by the profiler in some ASICs. |
| * @psoc_pci_pll_div_factor: PCI PLL DIV factor value. Needed by the profiler |
| * in some ASICs. |
| * @tpc_enabled_mask: Bit-mask that represents which TPCs are enabled. Relevant |
| * for Goya/Gaudi only. |
| * @dram_enabled: Whether the DRAM is enabled. |
| * @security_enabled: Whether security is enabled on device. |
| * @mme_master_slave_mode: Indicate whether the MME is working in master/slave |
| * configuration. Relevant for Greco and later. |
| * @cpucp_version: The CPUCP f/w version. |
| * @card_name: The card name as passed by the f/w. |
| * @tpc_enabled_mask_ext: Bit-mask that represents which TPCs are enabled. |
| * Relevant for Greco and later. |
| * @dram_page_size: The DRAM physical page size. |
| * @edma_enabled_mask: Bit-mask that represents which EDMAs are enabled. |
| * Relevant for Gaudi2 and later. |
| * @number_of_user_interrupts: The number of interrupts that are available to the userspace |
| * application to use. Relevant for Gaudi2 and later. |
| * @device_mem_alloc_default_page_size: default page size used in device memory allocation. |
| */ |
| struct hl_info_hw_ip_info { |
| __u64 sram_base_address; |
| __u64 dram_base_address; |
| __u64 dram_size; |
| __u32 sram_size; |
| __u32 num_of_events; |
| __u32 device_id; |
| __u32 module_id; |
| __u32 decoder_enabled_mask; |
| __u16 first_available_interrupt_id; |
| __u16 server_type; |
| __u32 cpld_version; |
| __u32 psoc_pci_pll_nr; |
| __u32 psoc_pci_pll_nf; |
| __u32 psoc_pci_pll_od; |
| __u32 psoc_pci_pll_div_factor; |
| __u8 tpc_enabled_mask; |
| __u8 dram_enabled; |
| __u8 security_enabled; |
| __u8 mme_master_slave_mode; |
| __u8 cpucp_version[HL_INFO_VERSION_MAX_LEN]; |
| __u8 card_name[HL_INFO_CARD_NAME_MAX_LEN]; |
| __u64 tpc_enabled_mask_ext; |
| __u64 dram_page_size; |
| __u32 edma_enabled_mask; |
| __u16 number_of_user_interrupts; |
| __u16 pad2; |
| __u64 reserved4; |
| __u64 device_mem_alloc_default_page_size; |
| }; |
| |
| struct hl_info_dram_usage { |
| __u64 dram_free_mem; |
| __u64 ctx_dram_mem; |
| }; |
| |
| #define HL_BUSY_ENGINES_MASK_EXT_SIZE 2 |
| |
| struct hl_info_hw_idle { |
| __u32 is_idle; |
| /* |
| * Bitmask of busy engines. |
| * Bits definition is according to `enum <chip>_engine_id'. |
| */ |
| __u32 busy_engines_mask; |
| |
| /* |
| * Extended Bitmask of busy engines. |
| * Bits definition is according to `enum <chip>_engine_id'. |
| */ |
| __u64 busy_engines_mask_ext[HL_BUSY_ENGINES_MASK_EXT_SIZE]; |
| }; |
| |
| struct hl_info_device_status { |
| __u32 status; |
| __u32 pad; |
| }; |
| |
| struct hl_info_device_utilization { |
| __u32 utilization; |
| __u32 pad; |
| }; |
| |
| struct hl_info_clk_rate { |
| __u32 cur_clk_rate_mhz; |
| __u32 max_clk_rate_mhz; |
| }; |
| |
| struct hl_info_reset_count { |
| __u32 hard_reset_cnt; |
| __u32 soft_reset_cnt; |
| }; |
| |
| struct hl_info_time_sync { |
| __u64 device_time; |
| __u64 host_time; |
| }; |
| |
| /** |
| * struct hl_info_pci_counters - pci counters |
| * @rx_throughput: PCI rx throughput KBps |
| * @tx_throughput: PCI tx throughput KBps |
| * @replay_cnt: PCI replay counter |
| */ |
| struct hl_info_pci_counters { |
| __u64 rx_throughput; |
| __u64 tx_throughput; |
| __u64 replay_cnt; |
| }; |
| |
| enum hl_clk_throttling_type { |
| HL_CLK_THROTTLE_TYPE_POWER, |
| HL_CLK_THROTTLE_TYPE_THERMAL, |
| HL_CLK_THROTTLE_TYPE_MAX |
| }; |
| |
| /* clk_throttling_reason masks */ |
| #define HL_CLK_THROTTLE_POWER (1 << HL_CLK_THROTTLE_TYPE_POWER) |
| #define HL_CLK_THROTTLE_THERMAL (1 << HL_CLK_THROTTLE_TYPE_THERMAL) |
| |
| /** |
| * struct hl_info_clk_throttle - clock throttling reason |
| * @clk_throttling_reason: each bit represents a clk throttling reason |
| * @clk_throttling_timestamp_us: represents CPU timestamp in microseconds of the start-event |
| * @clk_throttling_duration_ns: the clock throttle time in nanosec |
| */ |
| struct hl_info_clk_throttle { |
| __u32 clk_throttling_reason; |
| __u32 pad; |
| __u64 clk_throttling_timestamp_us[HL_CLK_THROTTLE_TYPE_MAX]; |
| __u64 clk_throttling_duration_ns[HL_CLK_THROTTLE_TYPE_MAX]; |
| }; |
| |
| /** |
| * struct hl_info_energy - device energy information |
| * @total_energy_consumption: total device energy consumption |
| */ |
| struct hl_info_energy { |
| __u64 total_energy_consumption; |
| }; |
| |
| #define HL_PLL_NUM_OUTPUTS 4 |
| |
| struct hl_pll_frequency_info { |
| __u16 output[HL_PLL_NUM_OUTPUTS]; |
| }; |
| |
| /** |
| * struct hl_open_stats_info - device open statistics information |
| * @open_counter: ever growing counter, increased on each successful dev open |
| * @last_open_period_ms: duration (ms) device was open last time |
| * @is_compute_ctx_active: Whether there is an active compute context executing |
| * @compute_ctx_in_release: true if the current compute context is being released |
| */ |
| struct hl_open_stats_info { |
| __u64 open_counter; |
| __u64 last_open_period_ms; |
| __u8 is_compute_ctx_active; |
| __u8 compute_ctx_in_release; |
| __u8 pad[6]; |
| }; |
| |
| /** |
| * struct hl_power_info - power information |
| * @power: power consumption |
| */ |
| struct hl_power_info { |
| __u64 power; |
| }; |
| |
| /** |
| * struct hl_info_sync_manager - sync manager information |
| * @first_available_sync_object: first available sob |
| * @first_available_monitor: first available monitor |
| * @first_available_cq: first available cq |
| */ |
| struct hl_info_sync_manager { |
| __u32 first_available_sync_object; |
| __u32 first_available_monitor; |
| __u32 first_available_cq; |
| __u32 reserved; |
| }; |
| |
| /** |
| * struct hl_info_cs_counters - command submission counters |
| * @total_out_of_mem_drop_cnt: total dropped due to memory allocation issue |
| * @ctx_out_of_mem_drop_cnt: context dropped due to memory allocation issue |
| * @total_parsing_drop_cnt: total dropped due to error in packet parsing |
| * @ctx_parsing_drop_cnt: context dropped due to error in packet parsing |
| * @total_queue_full_drop_cnt: total dropped due to queue full |
| * @ctx_queue_full_drop_cnt: context dropped due to queue full |
| * @total_device_in_reset_drop_cnt: total dropped due to device in reset |
| * @ctx_device_in_reset_drop_cnt: context dropped due to device in reset |
| * @total_max_cs_in_flight_drop_cnt: total dropped due to maximum CS in-flight |
| * @ctx_max_cs_in_flight_drop_cnt: context dropped due to maximum CS in-flight |
| * @total_validation_drop_cnt: total dropped due to validation error |
| * @ctx_validation_drop_cnt: context dropped due to validation error |
| */ |
| struct hl_info_cs_counters { |
| __u64 total_out_of_mem_drop_cnt; |
| __u64 ctx_out_of_mem_drop_cnt; |
| __u64 total_parsing_drop_cnt; |
| __u64 ctx_parsing_drop_cnt; |
| __u64 total_queue_full_drop_cnt; |
| __u64 ctx_queue_full_drop_cnt; |
| __u64 total_device_in_reset_drop_cnt; |
| __u64 ctx_device_in_reset_drop_cnt; |
| __u64 total_max_cs_in_flight_drop_cnt; |
| __u64 ctx_max_cs_in_flight_drop_cnt; |
| __u64 total_validation_drop_cnt; |
| __u64 ctx_validation_drop_cnt; |
| }; |
| |
| /** |
| * struct hl_info_last_err_open_dev_time - last error boot information. |
| * @timestamp: timestamp of last time the device was opened and error occurred. |
| */ |
| struct hl_info_last_err_open_dev_time { |
| __s64 timestamp; |
| }; |
| |
| /** |
| * struct hl_info_cs_timeout_event - last CS timeout information. |
| * @timestamp: timestamp when last CS timeout event occurred. |
| * @seq: sequence number of last CS timeout event. |
| */ |
| struct hl_info_cs_timeout_event { |
| __s64 timestamp; |
| __u64 seq; |
| }; |
| |
| #define HL_RAZWI_PAGE_FAULT 0 |
| #define HL_RAZWI_MMU_ACCESS_ERROR 1 |
| |
| /** |
| * struct hl_info_razwi_event - razwi information. |
| * @timestamp: timestamp of razwi. |
| * @addr: address which accessing it caused razwi. |
| * @engine_id_1: engine id of the razwi initiator, if it was initiated by engine that does not |
| * have engine id it will be set to U16_MAX. |
| * @engine_id_2: second engine id of razwi initiator. Might happen that razwi have 2 possible |
| * engines which one them caused the razwi. In that case, it will contain the |
| * second possible engine id, otherwise it will be set to U16_MAX. |
| * @no_engine_id: if razwi initiator does not have engine id, this field will be set to 1, |
| * otherwise 0. |
| * @error_type: cause of razwi, page fault or access error, otherwise it will be set to U8_MAX. |
| * @pad: padding to 64 bit. |
| */ |
| struct hl_info_razwi_event { |
| __s64 timestamp; |
| __u64 addr; |
| __u16 engine_id_1; |
| __u16 engine_id_2; |
| __u8 no_engine_id; |
| __u8 error_type; |
| __u8 pad[2]; |
| }; |
| |
| #define MAX_QMAN_STREAMS_INFO 4 |
| #define OPCODE_INFO_MAX_ADDR_SIZE 8 |
| /** |
| * struct hl_info_undefined_opcode_event - info about last undefined opcode error |
| * @timestamp: timestamp of the undefined opcode error |
| * @cb_addr_streams: CB addresses (per stream) that are currently exists in the PQ |
| * entries. In case all streams array entries are |
| * filled with values, it means the execution was in Lower-CP. |
| * @cq_addr: the address of the current handled command buffer |
| * @cq_size: the size of the current handled command buffer |
| * @cb_addr_streams_len: num of streams - actual len of cb_addr_streams array. |
| * should be equal to 1 in case of undefined opcode |
| * in Upper-CP (specific stream) and equal to 4 incase |
| * of undefined opcode in Lower-CP. |
| * @engine_id: engine-id that the error occurred on |
| * @stream_id: the stream id the error occurred on. In case the stream equals to |
| * MAX_QMAN_STREAMS_INFO it means the error occurred on a Lower-CP. |
| */ |
| struct hl_info_undefined_opcode_event { |
| __s64 timestamp; |
| __u64 cb_addr_streams[MAX_QMAN_STREAMS_INFO][OPCODE_INFO_MAX_ADDR_SIZE]; |
| __u64 cq_addr; |
| __u32 cq_size; |
| __u32 cb_addr_streams_len; |
| __u32 engine_id; |
| __u32 stream_id; |
| }; |
| |
| /** |
| * struct hl_info_dev_memalloc_page_sizes - valid page sizes in device mem alloc information. |
| * @page_order_bitmask: bitmap in which a set bit represents the order of the supported page size |
| * (e.g. 0x2100000 means that 1MB and 32MB pages are supported). |
| */ |
| struct hl_info_dev_memalloc_page_sizes { |
| __u64 page_order_bitmask; |
| }; |
| |
| #define SEC_PCR_DATA_BUF_SZ 256 |
| #define SEC_PCR_QUOTE_BUF_SZ 510 /* (512 - 2) 2 bytes used for size */ |
| #define SEC_SIGNATURE_BUF_SZ 255 /* (256 - 1) 1 byte used for size */ |
| #define SEC_PUB_DATA_BUF_SZ 510 /* (512 - 2) 2 bytes used for size */ |
| #define SEC_CERTIFICATE_BUF_SZ 2046 /* (2048 - 2) 2 bytes used for size */ |
| |
| /* |
| * struct hl_info_sec_attest - attestation report of the boot |
| * @nonce: number only used once. random number provided by host. this also passed to the quote |
| * command as a qualifying data. |
| * @pcr_quote_len: length of the attestation quote data (bytes) |
| * @pub_data_len: length of the public data (bytes) |
| * @certificate_len: length of the certificate (bytes) |
| * @pcr_num_reg: number of PCR registers in the pcr_data array |
| * @pcr_reg_len: length of each PCR register in the pcr_data array (bytes) |
| * @quote_sig_len: length of the attestation report signature (bytes) |
| * @pcr_data: raw values of the PCR registers |
| * @pcr_quote: attestation report data structure |
| * @quote_sig: signature structure of the attestation report |
| * @public_data: public key for the signed attestation |
| * (outPublic + name + qualifiedName) |
| * @certificate: certificate for the attestation signing key |
| */ |
| struct hl_info_sec_attest { |
| __u32 nonce; |
| __u16 pcr_quote_len; |
| __u16 pub_data_len; |
| __u16 certificate_len; |
| __u8 pcr_num_reg; |
| __u8 pcr_reg_len; |
| __u8 quote_sig_len; |
| __u8 pcr_data[SEC_PCR_DATA_BUF_SZ]; |
| __u8 pcr_quote[SEC_PCR_QUOTE_BUF_SZ]; |
| __u8 quote_sig[SEC_SIGNATURE_BUF_SZ]; |
| __u8 public_data[SEC_PUB_DATA_BUF_SZ]; |
| __u8 certificate[SEC_CERTIFICATE_BUF_SZ]; |
| __u8 pad0[2]; |
| }; |
| |
| enum gaudi_dcores { |
| HL_GAUDI_WS_DCORE, |
| HL_GAUDI_WN_DCORE, |
| HL_GAUDI_EN_DCORE, |
| HL_GAUDI_ES_DCORE |
| }; |
| |
| /** |
| * struct hl_info_args - Main structure to retrieve device related information. |
| * @return_pointer: User space address of the relevant structure related to HL_INFO_* operation |
| * mentioned in @op. |
| * @return_size: Size of the structure used in @return_pointer, just like "size" in "snprintf", it |
| * limits how many bytes the kernel can write. For hw_events array, the size should be |
| * hl_info_hw_ip_info.num_of_events * sizeof(__u32). |
| * @op: Defines which type of information to be retrieved. Refer HL_INFO_* for details. |
| * @dcore_id: DCORE id for which the information is relevant (for Gaudi refer to enum gaudi_dcores). |
| * @ctx_id: Context ID of the user. Currently not in use. |
| * @period_ms: Period value, in milliseconds, for utilization rate in range 100ms - 1000ms in 100 ms |
| * resolution. Currently not in use. |
| * @pll_index: Index as defined in hl_<asic type>_pll_index enumeration. |
| * @eventfd: event file descriptor for event notifications. |
| * @user_buffer_actual_size: Actual data size which was copied to user allocated buffer by the |
| * driver. It is possible for the user to allocate buffer larger than |
| * needed, hence updating this variable so user will know the exact amount |
| * of bytes copied by the kernel to the buffer. |
| * @sec_attest_nonce: Nonce number used for attestation report. |
| * @pad: Padding to 64 bit. |
| */ |
| struct hl_info_args { |
| __u64 return_pointer; |
| __u32 return_size; |
| __u32 op; |
| |
| union { |
| __u32 dcore_id; |
| __u32 ctx_id; |
| __u32 period_ms; |
| __u32 pll_index; |
| __u32 eventfd; |
| __u32 user_buffer_actual_size; |
| __u32 sec_attest_nonce; |
| }; |
| |
| __u32 pad; |
| }; |
| |
| /* Opcode to create a new command buffer */ |
| #define HL_CB_OP_CREATE 0 |
| /* Opcode to destroy previously created command buffer */ |
| #define HL_CB_OP_DESTROY 1 |
| /* Opcode to retrieve information about a command buffer */ |
| #define HL_CB_OP_INFO 2 |
| |
| /* 2MB minus 32 bytes for 2xMSG_PROT */ |
| #define HL_MAX_CB_SIZE (0x200000 - 32) |
| |
| /* Indicates whether the command buffer should be mapped to the device's MMU */ |
| #define HL_CB_FLAGS_MAP 0x1 |
| |
| /* Used with HL_CB_OP_INFO opcode to get the device va address for kernel mapped CB */ |
| #define HL_CB_FLAGS_GET_DEVICE_VA 0x2 |
| |
| struct hl_cb_in { |
| /* Handle of CB or 0 if we want to create one */ |
| __u64 cb_handle; |
| /* HL_CB_OP_* */ |
| __u32 op; |
| |
| /* Size of CB. Maximum size is HL_MAX_CB_SIZE. The minimum size that |
| * will be allocated, regardless of this parameter's value, is PAGE_SIZE |
| */ |
| __u32 cb_size; |
| |
| /* Context ID - Currently not in use */ |
| __u32 ctx_id; |
| /* HL_CB_FLAGS_* */ |
| __u32 flags; |
| }; |
| |
| struct hl_cb_out { |
| union { |
| /* Handle of CB */ |
| __u64 cb_handle; |
| |
| union { |
| /* Information about CB */ |
| struct { |
| /* Usage count of CB */ |
| __u32 usage_cnt; |
| __u32 pad; |
| }; |
| |
| /* CB mapped address to device MMU */ |
| __u64 device_va; |
| }; |
| }; |
| }; |
| |
| union hl_cb_args { |
| struct hl_cb_in in; |
| struct hl_cb_out out; |
| }; |
| |
| /* HL_CS_CHUNK_FLAGS_ values |
| * |
| * HL_CS_CHUNK_FLAGS_USER_ALLOC_CB: |
| * Indicates if the CB was allocated and mapped by userspace |
| * (relevant to greco and above). User allocated CB is a command buffer, |
| * allocated by the user, via malloc (or similar). After allocating the |
| * CB, the user invokes - “memory ioctl” to map the user memory into a |
| * device virtual address. The user provides this address via the |
| * cb_handle field. The interface provides the ability to create a |
| * large CBs, Which aren’t limited to “HL_MAX_CB_SIZE”. Therefore, it |
| * increases the PCI-DMA queues throughput. This CB allocation method |
| * also reduces the use of Linux DMA-able memory pool. Which are limited |
| * and used by other Linux sub-systems. |
| */ |
| #define HL_CS_CHUNK_FLAGS_USER_ALLOC_CB 0x1 |
| |
| /* |
| * This structure size must always be fixed to 64-bytes for backward |
| * compatibility |
| */ |
| struct hl_cs_chunk { |
| union { |
| /* Goya/Gaudi: |
| * For external queue, this represents a Handle of CB on the |
| * Host. |
| * For internal queue in Goya, this represents an SRAM or |
| * a DRAM address of the internal CB. In Gaudi, this might also |
| * represent a mapped host address of the CB. |
| * |
| * Greco onwards: |
| * For H/W queue, this represents either a Handle of CB on the |
| * Host, or an SRAM, a DRAM, or a mapped host address of the CB. |
| * |
| * A mapped host address is in the device address space, after |
| * a host address was mapped by the device MMU. |
| */ |
| __u64 cb_handle; |
| |
| /* Relevant only when HL_CS_FLAGS_WAIT or |
| * HL_CS_FLAGS_COLLECTIVE_WAIT is set |
| * This holds address of array of u64 values that contain |
| * signal CS sequence numbers. The wait described by |
| * this job will listen on all those signals |
| * (wait event per signal) |
| */ |
| __u64 signal_seq_arr; |
| |
| /* |
| * Relevant only when HL_CS_FLAGS_WAIT or |
| * HL_CS_FLAGS_COLLECTIVE_WAIT is set |
| * along with HL_CS_FLAGS_ENCAP_SIGNALS. |
| * This is the CS sequence which has the encapsulated signals. |
| */ |
| __u64 encaps_signal_seq; |
| }; |
| |
| /* Index of queue to put the CB on */ |
| __u32 queue_index; |
| |
| union { |
| /* |
| * Size of command buffer with valid packets |
| * Can be smaller then actual CB size |
| */ |
| __u32 cb_size; |
| |
| /* Relevant only when HL_CS_FLAGS_WAIT or |
| * HL_CS_FLAGS_COLLECTIVE_WAIT is set. |
| * Number of entries in signal_seq_arr |
| */ |
| __u32 num_signal_seq_arr; |
| |
| /* Relevant only when HL_CS_FLAGS_WAIT or |
| * HL_CS_FLAGS_COLLECTIVE_WAIT is set along |
| * with HL_CS_FLAGS_ENCAP_SIGNALS |
| * This set the signals range that the user want to wait for |
| * out of the whole reserved signals range. |
| * e.g if the signals range is 20, and user don't want |
| * to wait for signal 8, so he set this offset to 7, then |
| * he call the API again with 9 and so on till 20. |
| */ |
| __u32 encaps_signal_offset; |
| }; |
| |
| /* HL_CS_CHUNK_FLAGS_* */ |
| __u32 cs_chunk_flags; |
| |
| /* Relevant only when HL_CS_FLAGS_COLLECTIVE_WAIT is set. |
| * This holds the collective engine ID. The wait described by this job |
| * will sync with this engine and with all NICs before completion. |
| */ |
| __u32 collective_engine_id; |
| |
| /* Align structure to 64 bytes */ |
| __u32 pad[10]; |
| }; |
| |
| /* SIGNAL/WAIT/COLLECTIVE_WAIT flags are mutually exclusive */ |
| #define HL_CS_FLAGS_FORCE_RESTORE 0x1 |
| #define HL_CS_FLAGS_SIGNAL 0x2 |
| #define HL_CS_FLAGS_WAIT 0x4 |
| #define HL_CS_FLAGS_COLLECTIVE_WAIT 0x8 |
| |
| #define HL_CS_FLAGS_TIMESTAMP 0x20 |
| #define HL_CS_FLAGS_STAGED_SUBMISSION 0x40 |
| #define HL_CS_FLAGS_STAGED_SUBMISSION_FIRST 0x80 |
| #define HL_CS_FLAGS_STAGED_SUBMISSION_LAST 0x100 |
| #define HL_CS_FLAGS_CUSTOM_TIMEOUT 0x200 |
| #define HL_CS_FLAGS_SKIP_RESET_ON_TIMEOUT 0x400 |
| |
| /* |
| * The encapsulated signals CS is merged into the existing CS ioctls. |
| * In order to use this feature need to follow the below procedure: |
| * 1. Reserve signals, set the CS type to HL_CS_FLAGS_RESERVE_SIGNALS_ONLY |
| * the output of this API will be the SOB offset from CFG_BASE. |
| * this address will be used to patch CB cmds to do the signaling for this |
| * SOB by incrementing it's value. |
| * for reverting the reservation use HL_CS_FLAGS_UNRESERVE_SIGNALS_ONLY |
| * CS type, note that this might fail if out-of-sync happened to the SOB |
| * value, in case other signaling request to the same SOB occurred between |
| * reserve-unreserve calls. |
| * 2. Use the staged CS to do the encapsulated signaling jobs. |
| * use HL_CS_FLAGS_STAGED_SUBMISSION and HL_CS_FLAGS_STAGED_SUBMISSION_FIRST |
| * along with HL_CS_FLAGS_ENCAP_SIGNALS flag, and set encaps_signal_offset |
| * field. This offset allows app to wait on part of the reserved signals. |
| * 3. Use WAIT/COLLECTIVE WAIT CS along with HL_CS_FLAGS_ENCAP_SIGNALS flag |
| * to wait for the encapsulated signals. |
| */ |
| #define HL_CS_FLAGS_ENCAP_SIGNALS 0x800 |
| #define HL_CS_FLAGS_RESERVE_SIGNALS_ONLY 0x1000 |
| #define HL_CS_FLAGS_UNRESERVE_SIGNALS_ONLY 0x2000 |
| |
| /* |
| * The engine cores CS is merged into the existing CS ioctls. |
| * Use it to control the engine cores mode. |
| */ |
| #define HL_CS_FLAGS_ENGINE_CORE_COMMAND 0x4000 |
| |
| #define HL_CS_STATUS_SUCCESS 0 |
| |
| #define HL_MAX_JOBS_PER_CS 512 |
| |
| /* HL_ENGINE_CORE_ values |
| * |
| * HL_ENGINE_CORE_HALT: engine core halt |
| * HL_ENGINE_CORE_RUN: engine core run |
| */ |
| #define HL_ENGINE_CORE_HALT (1 << 0) |
| #define HL_ENGINE_CORE_RUN (1 << 1) |
| |
| struct hl_cs_in { |
| |
| union { |
| struct { |
| /* this holds address of array of hl_cs_chunk for restore phase */ |
| __u64 chunks_restore; |
| |
| /* holds address of array of hl_cs_chunk for execution phase */ |
| __u64 chunks_execute; |
| }; |
| |
| /* Valid only when HL_CS_FLAGS_ENGINE_CORE_COMMAND is set */ |
| struct { |
| /* this holds address of array of uint32 for engine_cores */ |
| __u64 engine_cores; |
| |
| /* number of engine cores in engine_cores array */ |
| __u32 num_engine_cores; |
| |
| /* the core command to be sent towards engine cores */ |
| __u32 core_command; |
| }; |
| }; |
| |
| union { |
| /* |
| * Sequence number of a staged submission CS |
| * valid only if HL_CS_FLAGS_STAGED_SUBMISSION is set and |
| * HL_CS_FLAGS_STAGED_SUBMISSION_FIRST is unset. |
| */ |
| __u64 seq; |
| |
| /* |
| * Encapsulated signals handle id |
| * Valid for two flows: |
| * 1. CS with encapsulated signals: |
| * when HL_CS_FLAGS_STAGED_SUBMISSION and |
| * HL_CS_FLAGS_STAGED_SUBMISSION_FIRST |
| * and HL_CS_FLAGS_ENCAP_SIGNALS are set. |
| * 2. unreserve signals: |
| * valid when HL_CS_FLAGS_UNRESERVE_SIGNALS_ONLY is set. |
| */ |
| __u32 encaps_sig_handle_id; |
| |
| /* Valid only when HL_CS_FLAGS_RESERVE_SIGNALS_ONLY is set */ |
| struct { |
| /* Encapsulated signals number */ |
| __u32 encaps_signals_count; |
| |
| /* Encapsulated signals queue index (stream) */ |
| __u32 encaps_signals_q_idx; |
| }; |
| }; |
| |
| /* Number of chunks in restore phase array. Maximum number is |
| * HL_MAX_JOBS_PER_CS |
| */ |
| __u32 num_chunks_restore; |
| |
| /* Number of chunks in execution array. Maximum number is |
| * HL_MAX_JOBS_PER_CS |
| */ |
| __u32 num_chunks_execute; |
| |
| /* timeout in seconds - valid only if HL_CS_FLAGS_CUSTOM_TIMEOUT |
| * is set |
| */ |
| __u32 timeout; |
| |
| /* HL_CS_FLAGS_* */ |
| __u32 cs_flags; |
| |
| /* Context ID - Currently not in use */ |
| __u32 ctx_id; |
| __u8 pad[4]; |
| }; |
| |
| struct hl_cs_out { |
| union { |
| /* |
| * seq holds the sequence number of the CS to pass to wait |
| * ioctl. All values are valid except for 0 and ULLONG_MAX |
| */ |
| __u64 seq; |
| |
| /* Valid only when HL_CS_FLAGS_RESERVE_SIGNALS_ONLY is set */ |
| struct { |
| /* This is the reserved signal handle id */ |
| __u32 handle_id; |
| |
| /* This is the signals count */ |
| __u32 count; |
| }; |
| }; |
| |
| /* HL_CS_STATUS */ |
| __u32 status; |
| |
| /* |
| * SOB base address offset |
| * Valid only when HL_CS_FLAGS_RESERVE_SIGNALS_ONLY or HL_CS_FLAGS_SIGNAL is set |
| */ |
| __u32 sob_base_addr_offset; |
| |
| /* |
| * Count of completed signals in SOB before current signal submission. |
| * Valid only when (HL_CS_FLAGS_ENCAP_SIGNALS & HL_CS_FLAGS_STAGED_SUBMISSION) |
| * or HL_CS_FLAGS_SIGNAL is set |
| */ |
| __u16 sob_count_before_submission; |
| __u16 pad[3]; |
| }; |
| |
| union hl_cs_args { |
| struct hl_cs_in in; |
| struct hl_cs_out out; |
| }; |
| |
| #define HL_WAIT_CS_FLAGS_INTERRUPT 0x2 |
| #define HL_WAIT_CS_FLAGS_INTERRUPT_MASK 0xFFF00000 |
| #define HL_WAIT_CS_FLAGS_ANY_CQ_INTERRUPT 0xFFF00000 |
| #define HL_WAIT_CS_FLAGS_ANY_DEC_INTERRUPT 0xFFE00000 |
| #define HL_WAIT_CS_FLAGS_MULTI_CS 0x4 |
| #define HL_WAIT_CS_FLAGS_INTERRUPT_KERNEL_CQ 0x10 |
| #define HL_WAIT_CS_FLAGS_REGISTER_INTERRUPT 0x20 |
| |
| #define HL_WAIT_MULTI_CS_LIST_MAX_LEN 32 |
| |
| struct hl_wait_cs_in { |
| union { |
| struct { |
| /* |
| * In case of wait_cs holds the CS sequence number. |
| * In case of wait for multi CS hold a user pointer to |
| * an array of CS sequence numbers |
| */ |
| __u64 seq; |
| /* Absolute timeout to wait for command submission |
| * in microseconds |
| */ |
| __u64 timeout_us; |
| }; |
| |
| struct { |
| union { |
| /* User address for completion comparison. |
| * upon interrupt, driver will compare the value pointed |
| * by this address with the supplied target value. |
| * in order not to perform any comparison, set address |
| * to all 1s. |
| * Relevant only when HL_WAIT_CS_FLAGS_INTERRUPT is set |
| */ |
| __u64 addr; |
| |
| /* cq_counters_handle to a kernel mapped cb which contains |
| * cq counters. |
| * Relevant only when HL_WAIT_CS_FLAGS_INTERRUPT_KERNEL_CQ is set |
| */ |
| __u64 cq_counters_handle; |
| }; |
| |
| /* Target value for completion comparison */ |
| __u64 target; |
| }; |
| }; |
| |
| /* Context ID - Currently not in use */ |
| __u32 ctx_id; |
| |
| /* HL_WAIT_CS_FLAGS_* |
| * If HL_WAIT_CS_FLAGS_INTERRUPT is set, this field should include |
| * interrupt id according to HL_WAIT_CS_FLAGS_INTERRUPT_MASK |
| * |
| * in order to wait for any CQ interrupt, set interrupt value to |
| * HL_WAIT_CS_FLAGS_ANY_CQ_INTERRUPT. |
| * |
| * in order to wait for any decoder interrupt, set interrupt value to |
| * HL_WAIT_CS_FLAGS_ANY_DEC_INTERRUPT. |
| */ |
| __u32 flags; |
| |
| union { |
| struct { |
| /* Multi CS API info- valid entries in multi-CS array */ |
| __u8 seq_arr_len; |
| __u8 pad[7]; |
| }; |
| |
| /* Absolute timeout to wait for an interrupt in microseconds. |
| * Relevant only when HL_WAIT_CS_FLAGS_INTERRUPT is set |
| */ |
| __u64 interrupt_timeout_us; |
| }; |
| |
| /* |
| * cq counter offset inside the counters cb pointed by cq_counters_handle above. |
| * upon interrupt, driver will compare the value pointed |
| * by this address (cq_counters_handle + cq_counters_offset) |
| * with the supplied target value. |
| * relevant only when HL_WAIT_CS_FLAGS_INTERRUPT_KERNEL_CQ is set |
| */ |
| __u64 cq_counters_offset; |
| |
| /* |
| * Timestamp_handle timestamps buffer handle. |
| * relevant only when HL_WAIT_CS_FLAGS_REGISTER_INTERRUPT is set |
| */ |
| __u64 timestamp_handle; |
| |
| /* |
| * Timestamp_offset is offset inside the timestamp buffer pointed by timestamp_handle above. |
| * upon interrupt, if the cq reached the target value then driver will write |
| * timestamp to this offset. |
| * relevant only when HL_WAIT_CS_FLAGS_REGISTER_INTERRUPT is set |
| */ |
| __u64 timestamp_offset; |
| }; |
| |
| #define HL_WAIT_CS_STATUS_COMPLETED 0 |
| #define HL_WAIT_CS_STATUS_BUSY 1 |
| #define HL_WAIT_CS_STATUS_TIMEDOUT 2 |
| #define HL_WAIT_CS_STATUS_ABORTED 3 |
| |
| #define HL_WAIT_CS_STATUS_FLAG_GONE 0x1 |
| #define HL_WAIT_CS_STATUS_FLAG_TIMESTAMP_VLD 0x2 |
| |
| struct hl_wait_cs_out { |
| /* HL_WAIT_CS_STATUS_* */ |
| __u32 status; |
| /* HL_WAIT_CS_STATUS_FLAG* */ |
| __u32 flags; |
| /* |
| * valid only if HL_WAIT_CS_STATUS_FLAG_TIMESTAMP_VLD is set |
| * for wait_cs: timestamp of CS completion |
| * for wait_multi_cs: timestamp of FIRST CS completion |
| */ |
| __s64 timestamp_nsec; |
| /* multi CS completion bitmap */ |
| __u32 cs_completion_map; |
| __u32 pad; |
| }; |
| |
| union hl_wait_cs_args { |
| struct hl_wait_cs_in in; |
| struct hl_wait_cs_out out; |
| }; |
| |
| /* Opcode to allocate device memory */ |
| #define HL_MEM_OP_ALLOC 0 |
| |
| /* Opcode to free previously allocated device memory */ |
| #define HL_MEM_OP_FREE 1 |
| |
| /* Opcode to map host and device memory */ |
| #define HL_MEM_OP_MAP 2 |
| |
| /* Opcode to unmap previously mapped host and device memory */ |
| #define HL_MEM_OP_UNMAP 3 |
| |
| /* Opcode to map a hw block */ |
| #define HL_MEM_OP_MAP_BLOCK 4 |
| |
| /* Opcode to create DMA-BUF object for an existing device memory allocation |
| * and to export an FD of that DMA-BUF back to the caller |
| */ |
| #define HL_MEM_OP_EXPORT_DMABUF_FD 5 |
| |
| /* Opcode to create timestamps pool for user interrupts registration support |
| * The memory will be allocated by the kernel driver, A timestamp buffer which the user |
| * will get handle to it for mmap, and another internal buffer used by the |
| * driver for registration management |
| * The memory will be freed when the user closes the file descriptor(ctx close) |
| */ |
| #define HL_MEM_OP_TS_ALLOC 6 |
| |
| /* Memory flags */ |
| #define HL_MEM_CONTIGUOUS 0x1 |
| #define HL_MEM_SHARED 0x2 |
| #define HL_MEM_USERPTR 0x4 |
| #define HL_MEM_FORCE_HINT 0x8 |
| #define HL_MEM_PREFETCH 0x40 |
| |
| /** |
| * structure hl_mem_in - structure that handle input args for memory IOCTL |
| * @union arg: union of structures to be used based on the input operation |
| * @op: specify the requested memory operation (one of the HL_MEM_OP_* definitions). |
| * @flags: flags for the memory operation (one of the HL_MEM_* definitions). |
| * For the HL_MEM_OP_EXPORT_DMABUF_FD opcode, this field holds the DMA-BUF file/FD flags. |
| * @ctx_id: context ID - currently not in use. |
| * @num_of_elements: number of timestamp elements used only with HL_MEM_OP_TS_ALLOC opcode. |
| */ |
| struct hl_mem_in { |
| union { |
| /** |
| * structure for device memory allocation (used with the HL_MEM_OP_ALLOC op) |
| * @mem_size: memory size to allocate |
| * @page_size: page size to use on allocation. when the value is 0 the default page |
| * size will be taken. |
| */ |
| struct { |
| __u64 mem_size; |
| __u64 page_size; |
| } alloc; |
| |
| /** |
| * structure for free-ing device memory (used with the HL_MEM_OP_FREE op) |
| * @handle: handle returned from HL_MEM_OP_ALLOC |
| */ |
| struct { |
| __u64 handle; |
| } free; |
| |
| /** |
| * structure for mapping device memory (used with the HL_MEM_OP_MAP op) |
| * @hint_addr: requested virtual address of mapped memory. |
| * the driver will try to map the requested region to this hint |
| * address, as long as the address is valid and not already mapped. |
| * the user should check the returned address of the IOCTL to make |
| * sure he got the hint address. |
| * passing 0 here means that the driver will choose the address itself. |
| * @handle: handle returned from HL_MEM_OP_ALLOC. |
| */ |
| struct { |
| __u64 hint_addr; |
| __u64 handle; |
| } map_device; |
| |
| /** |
| * structure for mapping host memory (used with the HL_MEM_OP_MAP op) |
| * @host_virt_addr: address of allocated host memory. |
| * @hint_addr: requested virtual address of mapped memory. |
| * the driver will try to map the requested region to this hint |
| * address, as long as the address is valid and not already mapped. |
| * the user should check the returned address of the IOCTL to make |
| * sure he got the hint address. |
| * passing 0 here means that the driver will choose the address itself. |
| * @size: size of allocated host memory. |
| */ |
| struct { |
| __u64 host_virt_addr; |
| __u64 hint_addr; |
| __u64 mem_size; |
| } map_host; |
| |
| /** |
| * structure for mapping hw block (used with the HL_MEM_OP_MAP_BLOCK op) |
| * @block_addr:HW block address to map, a handle and size will be returned |
| * to the user and will be used to mmap the relevant block. |
| * only addresses from configuration space are allowed. |
| */ |
| struct { |
| __u64 block_addr; |
| } map_block; |
| |
| /** |
| * structure for unmapping host memory (used with the HL_MEM_OP_UNMAP op) |
| * @device_virt_addr: virtual address returned from HL_MEM_OP_MAP |
| */ |
| struct { |
| __u64 device_virt_addr; |
| } unmap; |
| |
| /** |
| * structure for exporting DMABUF object (used with |
| * the HL_MEM_OP_EXPORT_DMABUF_FD op) |
| * @handle: handle returned from HL_MEM_OP_ALLOC. |
| * in Gaudi, where we don't have MMU for the device memory, the |
| * driver expects a physical address (instead of a handle) in the |
| * device memory space. |
| * @mem_size: size of memory allocation. Relevant only for GAUDI |
| */ |
| struct { |
| __u64 handle; |
| __u64 mem_size; |
| } export_dmabuf_fd; |
| }; |
| |
| __u32 op; |
| __u32 flags; |
| __u32 ctx_id; |
| __u32 num_of_elements; |
| }; |
| |
| struct hl_mem_out { |
| union { |
| /* |
| * Used for HL_MEM_OP_MAP as the virtual address that was |
| * assigned in the device VA space. |
| * A value of 0 means the requested operation failed. |
| */ |
| __u64 device_virt_addr; |
| |
| /* |
| * Used in HL_MEM_OP_ALLOC |
| * This is the assigned handle for the allocated memory |
| */ |
| __u64 handle; |
| |
| struct { |
| /* |
| * Used in HL_MEM_OP_MAP_BLOCK. |
| * This is the assigned handle for the mapped block |
| */ |
| __u64 block_handle; |
| |
| /* |
| * Used in HL_MEM_OP_MAP_BLOCK |
| * This is the size of the mapped block |
| */ |
| __u32 block_size; |
| |
| __u32 pad; |
| }; |
| |
| /* Returned in HL_MEM_OP_EXPORT_DMABUF_FD. Represents the |
| * DMA-BUF object that was created to describe a memory |
| * allocation on the device's memory space. The FD should be |
| * passed to the importer driver |
| */ |
| __s32 fd; |
| }; |
| }; |
| |
| union hl_mem_args { |
| struct hl_mem_in in; |
| struct hl_mem_out out; |
| }; |
| |
| #define HL_DEBUG_MAX_AUX_VALUES 10 |
| |
| struct hl_debug_params_etr { |
| /* Address in memory to allocate buffer */ |
| __u64 buffer_address; |
| |
| /* Size of buffer to allocate */ |
| __u64 buffer_size; |
| |
| /* Sink operation mode: SW fifo, HW fifo, Circular buffer */ |
| __u32 sink_mode; |
| __u32 pad; |
| }; |
| |
| struct hl_debug_params_etf { |
| /* Address in memory to allocate buffer */ |
| __u64 buffer_address; |
| |
| /* Size of buffer to allocate */ |
| __u64 buffer_size; |
| |
| /* Sink operation mode: SW fifo, HW fifo, Circular buffer */ |
| __u32 sink_mode; |
| __u32 pad; |
| }; |
| |
| struct hl_debug_params_stm { |
| /* Two bit masks for HW event and Stimulus Port */ |
| __u64 he_mask; |
| __u64 sp_mask; |
| |
| /* Trace source ID */ |
| __u32 id; |
| |
| /* Frequency for the timestamp register */ |
| __u32 frequency; |
| }; |
| |
| struct hl_debug_params_bmon { |
| /* Two address ranges that the user can request to filter */ |
| __u64 start_addr0; |
| __u64 addr_mask0; |
| |
| __u64 start_addr1; |
| __u64 addr_mask1; |
| |
| /* Capture window configuration */ |
| __u32 bw_win; |
| __u32 win_capture; |
| |
| /* Trace source ID */ |
| __u32 id; |
| |
| /* Control register */ |
| __u32 control; |
| |
| /* Two more address ranges that the user can request to filter */ |
| __u64 start_addr2; |
| __u64 end_addr2; |
| |
| __u64 start_addr3; |
| __u64 end_addr3; |
| }; |
| |
| struct hl_debug_params_spmu { |
| /* Event types selection */ |
| __u64 event_types[HL_DEBUG_MAX_AUX_VALUES]; |
| |
| /* Number of event types selection */ |
| __u32 event_types_num; |
| |
| /* TRC configuration register values */ |
| __u32 pmtrc_val; |
| __u32 trc_ctrl_host_val; |
| __u32 trc_en_host_val; |
| }; |
| |
| /* Opcode for ETR component */ |
| #define HL_DEBUG_OP_ETR 0 |
| /* Opcode for ETF component */ |
| #define HL_DEBUG_OP_ETF 1 |
| /* Opcode for STM component */ |
| #define HL_DEBUG_OP_STM 2 |
| /* Opcode for FUNNEL component */ |
| #define HL_DEBUG_OP_FUNNEL 3 |
| /* Opcode for BMON component */ |
| #define HL_DEBUG_OP_BMON 4 |
| /* Opcode for SPMU component */ |
| #define HL_DEBUG_OP_SPMU 5 |
| /* Opcode for timestamp (deprecated) */ |
| #define HL_DEBUG_OP_TIMESTAMP 6 |
| /* Opcode for setting the device into or out of debug mode. The enable |
| * variable should be 1 for enabling debug mode and 0 for disabling it |
| */ |
| #define HL_DEBUG_OP_SET_MODE 7 |
| |
| struct hl_debug_args { |
| /* |
| * Pointer to user input structure. |
| * This field is relevant to specific opcodes. |
| */ |
| __u64 input_ptr; |
| /* Pointer to user output structure */ |
| __u64 output_ptr; |
| /* Size of user input structure */ |
| __u32 input_size; |
| /* Size of user output structure */ |
| __u32 output_size; |
| /* HL_DEBUG_OP_* */ |
| __u32 op; |
| /* |
| * Register index in the component, taken from the debug_regs_index enum |
| * in the various ASIC header files |
| */ |
| __u32 reg_idx; |
| /* Enable/disable */ |
| __u32 enable; |
| /* Context ID - Currently not in use */ |
| __u32 ctx_id; |
| }; |
| |
| /* |
| * Various information operations such as: |
| * - H/W IP information |
| * - Current dram usage |
| * |
| * The user calls this IOCTL with an opcode that describes the required |
| * information. The user should supply a pointer to a user-allocated memory |
| * chunk, which will be filled by the driver with the requested information. |
| * |
| * The user supplies the maximum amount of size to copy into the user's memory, |
| * in order to prevent data corruption in case of differences between the |
| * definitions of structures in kernel and userspace, e.g. in case of old |
| * userspace and new kernel driver |
| */ |
| #define HL_IOCTL_INFO \ |
| _IOWR('H', 0x01, struct hl_info_args) |
| |
| /* |
| * Command Buffer |
| * - Request a Command Buffer |
| * - Destroy a Command Buffer |
| * |
| * The command buffers are memory blocks that reside in DMA-able address |
| * space and are physically contiguous so they can be accessed by the device |
| * directly. They are allocated using the coherent DMA API. |
| * |
| * When creating a new CB, the IOCTL returns a handle of it, and the user-space |
| * process needs to use that handle to mmap the buffer so it can access them. |
| * |
| * In some instances, the device must access the command buffer through the |
| * device's MMU, and thus its memory should be mapped. In these cases, user can |
| * indicate the driver that such a mapping is required. |
| * The resulting device virtual address will be used internally by the driver, |
| * and won't be returned to user. |
| * |
| */ |
| #define HL_IOCTL_CB \ |
| _IOWR('H', 0x02, union hl_cb_args) |
| |
| /* |
| * Command Submission |
| * |
| * To submit work to the device, the user need to call this IOCTL with a set |
| * of JOBS. That set of JOBS constitutes a CS object. |
| * Each JOB will be enqueued on a specific queue, according to the user's input. |
| * There can be more then one JOB per queue. |
| * |
| * The CS IOCTL will receive two sets of JOBS. One set is for "restore" phase |
| * and a second set is for "execution" phase. |
| * The JOBS on the "restore" phase are enqueued only after context-switch |
| * (or if its the first CS for this context). The user can also order the |
| * driver to run the "restore" phase explicitly |
| * |
| * Goya/Gaudi: |
| * There are two types of queues - external and internal. External queues |
| * are DMA queues which transfer data from/to the Host. All other queues are |
| * internal. The driver will get completion notifications from the device only |
| * on JOBS which are enqueued in the external queues. |
| * |
| * Greco onwards: |
| * There is a single type of queue for all types of engines, either DMA engines |
| * for transfers from/to the host or inside the device, or compute engines. |
| * The driver will get completion notifications from the device for all queues. |
| * |
| * For jobs on external queues, the user needs to create command buffers |
| * through the CB ioctl and give the CB's handle to the CS ioctl. For jobs on |
| * internal queues, the user needs to prepare a "command buffer" with packets |
| * on either the device SRAM/DRAM or the host, and give the device address of |
| * that buffer to the CS ioctl. |
| * For jobs on H/W queues both options of command buffers are valid. |
| * |
| * This IOCTL is asynchronous in regard to the actual execution of the CS. This |
| * means it returns immediately after ALL the JOBS were enqueued on their |
| * relevant queues. Therefore, the user mustn't assume the CS has been completed |
| * or has even started to execute. |
| * |
| * Upon successful enqueue, the IOCTL returns a sequence number which the user |
| * can use with the "Wait for CS" IOCTL to check whether the handle's CS |
| * non-internal JOBS have been completed. Note that if the CS has internal JOBS |
| * which can execute AFTER the external JOBS have finished, the driver might |
| * report that the CS has finished executing BEFORE the internal JOBS have |
| * actually finished executing. |
| * |
| * Even though the sequence number increments per CS, the user can NOT |
| * automatically assume that if CS with sequence number N finished, then CS |
| * with sequence number N-1 also finished. The user can make this assumption if |
| * and only if CS N and CS N-1 are exactly the same (same CBs for the same |
| * queues). |
| */ |
| #define HL_IOCTL_CS \ |
| _IOWR('H', 0x03, union hl_cs_args) |
| |
| /* |
| * Wait for Command Submission |
| * |
| * The user can call this IOCTL with a handle it received from the CS IOCTL |
| * to wait until the handle's CS has finished executing. The user will wait |
| * inside the kernel until the CS has finished or until the user-requested |
| * timeout has expired. |
| * |
| * If the timeout value is 0, the driver won't sleep at all. It will check |
| * the status of the CS and return immediately |
| * |
| * The return value of the IOCTL is a standard Linux error code. The possible |
| * values are: |
| * |
| * EINTR - Kernel waiting has been interrupted, e.g. due to OS signal |
| * that the user process received |
| * ETIMEDOUT - The CS has caused a timeout on the device |
| * EIO - The CS was aborted (usually because the device was reset) |
| * ENODEV - The device wants to do hard-reset (so user need to close FD) |
| * |
| * The driver also returns a custom define in case the IOCTL call returned 0. |
| * The define can be one of the following: |
| * |
| * HL_WAIT_CS_STATUS_COMPLETED - The CS has been completed successfully (0) |
| * HL_WAIT_CS_STATUS_BUSY - The CS is still executing (0) |
| * HL_WAIT_CS_STATUS_TIMEDOUT - The CS has caused a timeout on the device |
| * (ETIMEDOUT) |
| * HL_WAIT_CS_STATUS_ABORTED - The CS was aborted, usually because the |
| * device was reset (EIO) |
| */ |
| |
| #define HL_IOCTL_WAIT_CS \ |
| _IOWR('H', 0x04, union hl_wait_cs_args) |
| |
| /* |
| * Memory |
| * - Map host memory to device MMU |
| * - Unmap host memory from device MMU |
| * |
| * This IOCTL allows the user to map host memory to the device MMU |
| * |
| * For host memory, the IOCTL doesn't allocate memory. The user is supposed |
| * to allocate the memory in user-space (malloc/new). The driver pins the |
| * physical pages (up to the allowed limit by the OS), assigns a virtual |
| * address in the device VA space and initializes the device MMU. |
| * |
| * There is an option for the user to specify the requested virtual address. |
| * |
| */ |
| #define HL_IOCTL_MEMORY \ |
| _IOWR('H', 0x05, union hl_mem_args) |
| |
| /* |
| * Debug |
| * - Enable/disable the ETR/ETF/FUNNEL/STM/BMON/SPMU debug traces |
| * |
| * This IOCTL allows the user to get debug traces from the chip. |
| * |
| * Before the user can send configuration requests of the various |
| * debug/profile engines, it needs to set the device into debug mode. |
| * This is because the debug/profile infrastructure is shared component in the |
| * device and we can't allow multiple users to access it at the same time. |
| * |
| * Once a user set the device into debug mode, the driver won't allow other |
| * users to "work" with the device, i.e. open a FD. If there are multiple users |
| * opened on the device, the driver won't allow any user to debug the device. |
| * |
| * For each configuration request, the user needs to provide the register index |
| * and essential data such as buffer address and size. |
| * |
| * Once the user has finished using the debug/profile engines, he should |
| * set the device into non-debug mode, i.e. disable debug mode. |
| * |
| * The driver can decide to "kick out" the user if he abuses this interface. |
| * |
| */ |
| #define HL_IOCTL_DEBUG \ |
| _IOWR('H', 0x06, struct hl_debug_args) |
| |
| #define HL_COMMAND_START 0x01 |
| #define HL_COMMAND_END 0x07 |
| |
| #endif /* HABANALABS_H_ */ |