commit 3d657b5c06b970a0ded4a2648ac0ff2d3bb244af
author Vincent Stehlé <vincent.stehle@laposte.net> Sat Apr 18 14:35:22 2020 +0200
committer Greg Kroah-Hartman <gregkh@linuxfoundation.org> Wed Jun 03 08:19:36 2020 +0200
tree 80bd174e7b7e1fae768555bcf5c1e904ed03c529
parent 6811a01ab790310895d5f3f586db34ee5e39f7c5

ARM: dts: bcm2835-rpi-zero-w: Fix led polarity

[ Upstream commit 58bb90ab415562eededb932455046924e65df342 ]

The status "ACT" led on the Raspberry Pi Zero W is on when GPIO 47 is low.

This has been verified on a board and somewhat confirmed by both the GPIO
name ("STATUS_LED_N") and the reduced schematics [1].

[1]: https://www.raspberrypi.org/documentation/hardware/raspberrypi/schematics/rpi_SCH_ZeroW_1p1_reduced.pdf

Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arch/arm/boot/dts/bcm2835-rpi-zero-w.dts

diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index 5fcadb9..9f7145b 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -25,7 +25,7 @@
 
 	leds {
 		act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 		};
 	};