drivers/fsi/fsi-master-hub.c - third_party/kernel - Git at Google

 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * FSI hub master driver
  *
  * Copyright (C) IBM Corporation 2016
  */

 #include <linux/delay.h>
 #include <linux/fsi.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/slab.h>

 #include "fsi-master.h"

 /* Control Registers */
 #define FSI_MMODE		0x0		/* R/W: mode */
 #define FSI_MDLYR		0x4		/* R/W: delay */
 #define FSI_MCRSP		0x8		/* R/W: clock rate */
 #define FSI_MENP0		0x10		/* R/W: enable */
 #define FSI_MLEVP0		0x18		/* R: plug detect */
 #define FSI_MSENP0		0x18		/* S: Set enable */
 #define FSI_MCENP0		0x20		/* C: Clear enable */
 #define FSI_MAEB		0x70		/* R: Error address */
 #define FSI_MVER		0x74		/* R: master version/type */
 #define FSI_MRESP0		0xd0		/* W: Port reset */
 #define FSI_MESRB0		0x1d0		/* R: Master error status */
 #define FSI_MRESB0		0x1d0		/* W: Reset bridge */
 #define FSI_MECTRL		0x2e0		/* W: Error control */

 /* MMODE: Mode control */
 #define FSI_MMODE_EIP		0x80000000	/* Enable interrupt polling */
 #define FSI_MMODE_ECRC		0x40000000	/* Enable error recovery */
 #define FSI_MMODE_EPC		0x10000000	/* Enable parity checking */
 #define FSI_MMODE_P8_TO_LSB	0x00000010	/* Timeout value LSB */
 						/*   MSB=1, LSB=0 is 0.8 ms */
 						/*   MSB=0, LSB=1 is 0.9 ms */
 #define FSI_MMODE_CRS0SHFT	18		/* Clk rate selection 0 shift */
 #define FSI_MMODE_CRS0MASK	0x3ff		/* Clk rate selection 0 mask */
 #define FSI_MMODE_CRS1SHFT	8		/* Clk rate selection 1 shift */
 #define FSI_MMODE_CRS1MASK	0x3ff		/* Clk rate selection 1 mask */

 /* MRESB: Reset brindge */
 #define FSI_MRESB_RST_GEN	0x80000000	/* General reset */
 #define FSI_MRESB_RST_ERR	0x40000000	/* Error Reset */

 /* MRESB: Reset port */
 #define FSI_MRESP_RST_ALL_MASTER 0x20000000	/* Reset all FSI masters */
 #define FSI_MRESP_RST_ALL_LINK	0x10000000	/* Reset all FSI port contr. */
 #define FSI_MRESP_RST_MCR	0x08000000	/* Reset FSI master reg. */
 #define FSI_MRESP_RST_PYE	0x04000000	/* Reset FSI parity error */
 #define FSI_MRESP_RST_ALL	0xfc000000	/* Reset any error */

 /* MECTRL: Error control */
 #define FSI_MECTRL_EOAE		0x8000		/* Enable machine check when */
 						/* master 0 in error */
 #define FSI_MECTRL_P8_AUTO_TERM	0x4000		/* Auto terminate */

 #define FSI_ENGID_HUB_MASTER		0x1c
 #define FSI_HUB_LINK_OFFSET		0x80000
 #define FSI_HUB_LINK_SIZE		0x80000
 #define FSI_HUB_MASTER_MAX_LINKS	8

 #define FSI_LINK_ENABLE_SETUP_TIME	10	/* in mS */

 /*
  * FSI hub master support
  *
  * A hub master increases the number of potential target devices that the
  * primary FSI master can access. For each link a primary master supports,
  * each of those links can in turn be chained to a hub master with multiple
  * links of its own.
  *
  * The hub is controlled by a set of control registers exposed as a regular fsi
  * device (the hub->upstream device), and provides access to the downstream FSI
  * bus as through an address range on the slave itself (->addr and ->size).
  *
  * [This differs from "cascaded" masters, which expose the entire downstream
  * bus entirely through the fsi device address range, and so have a smaller
  * accessible address space.]
  */
 struct fsi_master_hub {
 	struct fsi_master	master;
 	struct fsi_device	*upstream;
 	uint32_t		addr, size;	/* slave-relative addr of */
 						/* master address space */
 };

 #define to_fsi_master_hub(m) container_of(m, struct fsi_master_hub, master)

 static int hub_master_read(struct fsi_master *master, int link,
 			uint8_t id, uint32_t addr, void *val, size_t size)
 {
 	struct fsi_master_hub *hub = to_fsi_master_hub(master);

 	if (id != 0)
 		return -EINVAL;

 	addr += hub->addr + (link * FSI_HUB_LINK_SIZE);
 	return fsi_slave_read(hub->upstream->slave, addr, val, size);
 }

 static int hub_master_write(struct fsi_master *master, int link,
 			uint8_t id, uint32_t addr, const void *val, size_t size)
 {
 	struct fsi_master_hub *hub = to_fsi_master_hub(master);

 	if (id != 0)
 		return -EINVAL;

 	addr += hub->addr + (link * FSI_HUB_LINK_SIZE);
 	return fsi_slave_write(hub->upstream->slave, addr, val, size);
 }

 static int hub_master_break(struct fsi_master *master, int link)
 {
 	uint32_t addr;
 	__be32 cmd;

 	addr = 0x4;
 	cmd = cpu_to_be32(0xc0de0000);

 	return hub_master_write(master, link, 0, addr, &cmd, sizeof(cmd));
 }

 static int hub_master_link_enable(struct fsi_master *master, int link)
 {
 	struct fsi_master_hub *hub = to_fsi_master_hub(master);
 	int idx, bit;
 	__be32 reg;
 	int rc;

 	idx = link / 32;
 	bit = link % 32;

 	reg = cpu_to_be32(0x80000000 >> bit);

 	rc = fsi_device_write(hub->upstream, FSI_MSENP0 + (4 * idx), &reg, 4);

 	mdelay(FSI_LINK_ENABLE_SETUP_TIME);

 	fsi_device_read(hub->upstream, FSI_MENP0 + (4 * idx), &reg, 4);

 	return rc;
 }

 static void hub_master_release(struct device *dev)
 {
 	struct fsi_master_hub *hub = to_fsi_master_hub(dev_to_fsi_master(dev));

 	kfree(hub);
 }

 /* mmode encoders */
 static inline u32 fsi_mmode_crs0(u32 x)
 {
 	return (x & FSI_MMODE_CRS0MASK) << FSI_MMODE_CRS0SHFT;
 }

 static inline u32 fsi_mmode_crs1(u32 x)
 {
 	return (x & FSI_MMODE_CRS1MASK) << FSI_MMODE_CRS1SHFT;
 }

 static int hub_master_init(struct fsi_master_hub *hub)
 {
 	struct fsi_device *dev = hub->upstream;
 	__be32 reg;
 	int rc;

 	reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK
 			| FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE);
 	rc = fsi_device_write(dev, FSI_MRESP0, &reg, sizeof(reg));
 	if (rc)
 		return rc;

 	/* Initialize the MFSI (hub master) engine */
 	reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK
 			| FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE);
 	rc = fsi_device_write(dev, FSI_MRESP0, &reg, sizeof(reg));
 	if (rc)
 		return rc;

 	reg = cpu_to_be32(FSI_MECTRL_EOAE | FSI_MECTRL_P8_AUTO_TERM);
 	rc = fsi_device_write(dev, FSI_MECTRL, &reg, sizeof(reg));
 	if (rc)
 		return rc;

 	reg = cpu_to_be32(FSI_MMODE_EIP | FSI_MMODE_ECRC | FSI_MMODE_EPC
 			| fsi_mmode_crs0(1) | fsi_mmode_crs1(1)
 			| FSI_MMODE_P8_TO_LSB);
 	rc = fsi_device_write(dev, FSI_MMODE, &reg, sizeof(reg));
 	if (rc)
 		return rc;

 	reg = cpu_to_be32(0xffff0000);
 	rc = fsi_device_write(dev, FSI_MDLYR, &reg, sizeof(reg));
 	if (rc)
 		return rc;

 	reg = cpu_to_be32(~0);
 	rc = fsi_device_write(dev, FSI_MSENP0, &reg, sizeof(reg));
 	if (rc)
 		return rc;

 	/* Leave enabled long enough for master logic to set up */
 	mdelay(FSI_LINK_ENABLE_SETUP_TIME);

 	rc = fsi_device_write(dev, FSI_MCENP0, &reg, sizeof(reg));
 	if (rc)
 		return rc;

 	rc = fsi_device_read(dev, FSI_MAEB, &reg, sizeof(reg));
 	if (rc)
 		return rc;

 	reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK);
 	rc = fsi_device_write(dev, FSI_MRESP0, &reg, sizeof(reg));
 	if (rc)
 		return rc;

 	rc = fsi_device_read(dev, FSI_MLEVP0, &reg, sizeof(reg));
 	if (rc)
 		return rc;

 	/* Reset the master bridge */
 	reg = cpu_to_be32(FSI_MRESB_RST_GEN);
 	rc = fsi_device_write(dev, FSI_MRESB0, &reg, sizeof(reg));
 	if (rc)
 		return rc;

 	reg = cpu_to_be32(FSI_MRESB_RST_ERR);
 	return fsi_device_write(dev, FSI_MRESB0, &reg, sizeof(reg));
 }

 static int hub_master_probe(struct device *dev)
 {
 	struct fsi_device *fsi_dev = to_fsi_dev(dev);
 	struct fsi_master_hub *hub;
 	uint32_t reg, links;
 	__be32 __reg;
 	int rc;

 	rc = fsi_device_read(fsi_dev, FSI_MVER, &__reg, sizeof(__reg));
 	if (rc)
 		return rc;

 	reg = be32_to_cpu(__reg);
 	links = (reg >> 8) & 0xff;
 	dev_dbg(dev, "hub version %08x (%d links)\n", reg, links);

 	rc = fsi_slave_claim_range(fsi_dev->slave, FSI_HUB_LINK_OFFSET,
 			FSI_HUB_LINK_SIZE * links);
 	if (rc) {
 		dev_err(dev, "can't claim slave address range for links");
 		return rc;
 	}

 	hub = kzalloc(sizeof(*hub), GFP_KERNEL);
 	if (!hub) {
 		rc = -ENOMEM;
 		goto err_release;
 	}

 	hub->addr = FSI_HUB_LINK_OFFSET;
 	hub->size = FSI_HUB_LINK_SIZE * links;
 	hub->upstream = fsi_dev;

 	hub->master.dev.parent = dev;
 	hub->master.dev.release = hub_master_release;
 	hub->master.dev.of_node = of_node_get(dev_of_node(dev));

 	hub->master.n_links = links;
 	hub->master.read = hub_master_read;
 	hub->master.write = hub_master_write;
 	hub->master.send_break = hub_master_break;
 	hub->master.link_enable = hub_master_link_enable;

 	dev_set_drvdata(dev, hub);

 	hub_master_init(hub);

 	rc = fsi_master_register(&hub->master);
 	if (rc)
 		goto err_release;

 	/* At this point, fsi_master_register performs the device_initialize(),
 	 * and holds the sole reference on master.dev. This means the device
 	 * will be freed (via ->release) during any subsequent call to
 	 * fsi_master_unregister.  We add our own reference to it here, so we
 	 * can perform cleanup (in _remove()) without it being freed before
 	 * we're ready.
 	 */
 	get_device(&hub->master.dev);
 	return 0;

 err_release:
 	fsi_slave_release_range(fsi_dev->slave, FSI_HUB_LINK_OFFSET,
 			FSI_HUB_LINK_SIZE * links);
 	return rc;
 }

 static int hub_master_remove(struct device *dev)
 {
 	struct fsi_master_hub *hub = dev_get_drvdata(dev);

 	fsi_master_unregister(&hub->master);
 	fsi_slave_release_range(hub->upstream->slave, hub->addr, hub->size);
 	of_node_put(hub->master.dev.of_node);

 	/*
 	 * master.dev will likely be ->release()ed after this, which free()s
 	 * the hub
 	 */
 	put_device(&hub->master.dev);

 	return 0;
 }

 static struct fsi_device_id hub_master_ids[] = {
 	{
 		.engine_type = FSI_ENGID_HUB_MASTER,
 		.version = FSI_VERSION_ANY,
 	},
 	{ 0 }
 };

 static struct fsi_driver hub_master_driver = {
 	.id_table = hub_master_ids,
 	.drv = {
 		.name = "fsi-master-hub",
 		.bus = &fsi_bus_type,
 		.probe = hub_master_probe,
 		.remove = hub_master_remove,
 	}
 };

 module_fsi_driver(hub_master_driver);
 MODULE_LICENSE("GPL");
	// SPDX-License-Identifier: GPL-2.0-only
	/*
	* FSI hub master driver
	*
	* Copyright (C) IBM Corporation 2016
	*/

	#include <linux/delay.h>
	#include <linux/fsi.h>
	#include <linux/module.h>
	#include <linux/of.h>
	#include <linux/slab.h>

	#include "fsi-master.h"

	/* Control Registers */
	#define FSI_MMODE 0x0 /* R/W: mode */
	#define FSI_MDLYR 0x4 /* R/W: delay */
	#define FSI_MCRSP 0x8 /* R/W: clock rate */
	#define FSI_MENP0 0x10 /* R/W: enable */
	#define FSI_MLEVP0 0x18 /* R: plug detect */
	#define FSI_MSENP0 0x18 /* S: Set enable */
	#define FSI_MCENP0 0x20 /* C: Clear enable */
	#define FSI_MAEB 0x70 /* R: Error address */
	#define FSI_MVER 0x74 /* R: master version/type */
	#define FSI_MRESP0 0xd0 /* W: Port reset */
	#define FSI_MESRB0 0x1d0 /* R: Master error status */
	#define FSI_MRESB0 0x1d0 /* W: Reset bridge */
	#define FSI_MECTRL 0x2e0 /* W: Error control */

	/* MMODE: Mode control */
	#define FSI_MMODE_EIP 0x80000000 /* Enable interrupt polling */
	#define FSI_MMODE_ECRC 0x40000000 /* Enable error recovery */
	#define FSI_MMODE_EPC 0x10000000 /* Enable parity checking */
	#define FSI_MMODE_P8_TO_LSB 0x00000010 /* Timeout value LSB */
	/* MSB=1, LSB=0 is 0.8 ms */
	/* MSB=0, LSB=1 is 0.9 ms */
	#define FSI_MMODE_CRS0SHFT 18 /* Clk rate selection 0 shift */
	#define FSI_MMODE_CRS0MASK 0x3ff /* Clk rate selection 0 mask */
	#define FSI_MMODE_CRS1SHFT 8 /* Clk rate selection 1 shift */
	#define FSI_MMODE_CRS1MASK 0x3ff /* Clk rate selection 1 mask */

	/* MRESB: Reset brindge */
	#define FSI_MRESB_RST_GEN 0x80000000 /* General reset */
	#define FSI_MRESB_RST_ERR 0x40000000 /* Error Reset */

	/* MRESB: Reset port */
	#define FSI_MRESP_RST_ALL_MASTER 0x20000000 /* Reset all FSI masters */
	#define FSI_MRESP_RST_ALL_LINK 0x10000000 /* Reset all FSI port contr. */
	#define FSI_MRESP_RST_MCR 0x08000000 /* Reset FSI master reg. */
	#define FSI_MRESP_RST_PYE 0x04000000 /* Reset FSI parity error */
	#define FSI_MRESP_RST_ALL 0xfc000000 /* Reset any error */

	/* MECTRL: Error control */
	#define FSI_MECTRL_EOAE 0x8000 /* Enable machine check when */
	/* master 0 in error */
	#define FSI_MECTRL_P8_AUTO_TERM 0x4000 /* Auto terminate */

	#define FSI_ENGID_HUB_MASTER 0x1c
	#define FSI_HUB_LINK_OFFSET 0x80000
	#define FSI_HUB_LINK_SIZE 0x80000
	#define FSI_HUB_MASTER_MAX_LINKS 8

	#define FSI_LINK_ENABLE_SETUP_TIME 10 /* in mS */

	/*
	* FSI hub master support
	*
	* A hub master increases the number of potential target devices that the
	* primary FSI master can access. For each link a primary master supports,
	* each of those links can in turn be chained to a hub master with multiple
	* links of its own.
	*
	* The hub is controlled by a set of control registers exposed as a regular fsi
	* device (the hub->upstream device), and provides access to the downstream FSI
	* bus as through an address range on the slave itself (->addr and ->size).
	*
	* [This differs from "cascaded" masters, which expose the entire downstream
	* bus entirely through the fsi device address range, and so have a smaller
	* accessible address space.]
	*/
	struct fsi_master_hub {
	struct fsi_master master;
	struct fsi_device *upstream;
	uint32_t addr, size; /* slave-relative addr of */
	/* master address space */
	};

	#define to_fsi_master_hub(m) container_of(m, struct fsi_master_hub, master)

	static int hub_master_read(struct fsi_master *master, int link,
	uint8_t id, uint32_t addr, void *val, size_t size)
	{
	struct fsi_master_hub *hub = to_fsi_master_hub(master);

	if (id != 0)
	return -EINVAL;

	addr += hub->addr + (link * FSI_HUB_LINK_SIZE);
	return fsi_slave_read(hub->upstream->slave, addr, val, size);
	}

	static int hub_master_write(struct fsi_master *master, int link,
	uint8_t id, uint32_t addr, const void *val, size_t size)
	{
	struct fsi_master_hub *hub = to_fsi_master_hub(master);

	if (id != 0)
	return -EINVAL;

	addr += hub->addr + (link * FSI_HUB_LINK_SIZE);
	return fsi_slave_write(hub->upstream->slave, addr, val, size);
	}

	static int hub_master_break(struct fsi_master *master, int link)
	{
	uint32_t addr;
	__be32 cmd;

	addr = 0x4;
	cmd = cpu_to_be32(0xc0de0000);

	return hub_master_write(master, link, 0, addr, &cmd, sizeof(cmd));
	}

	static int hub_master_link_enable(struct fsi_master *master, int link)
	{
	struct fsi_master_hub *hub = to_fsi_master_hub(master);
	int idx, bit;
	__be32 reg;
	int rc;

	idx = link / 32;
	bit = link % 32;

	reg = cpu_to_be32(0x80000000 >> bit);

	rc = fsi_device_write(hub->upstream, FSI_MSENP0 + (4 * idx), &reg, 4);

	mdelay(FSI_LINK_ENABLE_SETUP_TIME);

	fsi_device_read(hub->upstream, FSI_MENP0 + (4 * idx), &reg, 4);

	return rc;
	}

	static void hub_master_release(struct device *dev)
	{
	struct fsi_master_hub *hub = to_fsi_master_hub(dev_to_fsi_master(dev));

	kfree(hub);
	}

	/* mmode encoders */
	static inline u32 fsi_mmode_crs0(u32 x)
	{
	return (x & FSI_MMODE_CRS0MASK) << FSI_MMODE_CRS0SHFT;
	}

	static inline u32 fsi_mmode_crs1(u32 x)
	{
	return (x & FSI_MMODE_CRS1MASK) << FSI_MMODE_CRS1SHFT;
	}

	static int hub_master_init(struct fsi_master_hub *hub)
	{
	struct fsi_device *dev = hub->upstream;
	__be32 reg;
	int rc;

	reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER \| FSI_MRESP_RST_ALL_LINK
	\| FSI_MRESP_RST_MCR \| FSI_MRESP_RST_PYE);
	rc = fsi_device_write(dev, FSI_MRESP0, &reg, sizeof(reg));
	if (rc)
	return rc;

	/* Initialize the MFSI (hub master) engine */
	reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER \| FSI_MRESP_RST_ALL_LINK
	\| FSI_MRESP_RST_MCR \| FSI_MRESP_RST_PYE);
	rc = fsi_device_write(dev, FSI_MRESP0, &reg, sizeof(reg));
	if (rc)
	return rc;

	reg = cpu_to_be32(FSI_MECTRL_EOAE \| FSI_MECTRL_P8_AUTO_TERM);
	rc = fsi_device_write(dev, FSI_MECTRL, &reg, sizeof(reg));
	if (rc)
	return rc;

	reg = cpu_to_be32(FSI_MMODE_EIP \| FSI_MMODE_ECRC \| FSI_MMODE_EPC
	\| fsi_mmode_crs0(1) \| fsi_mmode_crs1(1)
	\| FSI_MMODE_P8_TO_LSB);
	rc = fsi_device_write(dev, FSI_MMODE, &reg, sizeof(reg));
	if (rc)
	return rc;

	reg = cpu_to_be32(0xffff0000);
	rc = fsi_device_write(dev, FSI_MDLYR, &reg, sizeof(reg));
	if (rc)
	return rc;

	reg = cpu_to_be32(~0);
	rc = fsi_device_write(dev, FSI_MSENP0, &reg, sizeof(reg));
	if (rc)
	return rc;

	/* Leave enabled long enough for master logic to set up */
	mdelay(FSI_LINK_ENABLE_SETUP_TIME);

	rc = fsi_device_write(dev, FSI_MCENP0, &reg, sizeof(reg));
	if (rc)
	return rc;

	rc = fsi_device_read(dev, FSI_MAEB, &reg, sizeof(reg));
	if (rc)
	return rc;

	reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER \| FSI_MRESP_RST_ALL_LINK);
	rc = fsi_device_write(dev, FSI_MRESP0, &reg, sizeof(reg));
	if (rc)
	return rc;

	rc = fsi_device_read(dev, FSI_MLEVP0, &reg, sizeof(reg));
	if (rc)
	return rc;

	/* Reset the master bridge */
	reg = cpu_to_be32(FSI_MRESB_RST_GEN);
	rc = fsi_device_write(dev, FSI_MRESB0, &reg, sizeof(reg));
	if (rc)
	return rc;

	reg = cpu_to_be32(FSI_MRESB_RST_ERR);
	return fsi_device_write(dev, FSI_MRESB0, &reg, sizeof(reg));
	}

	static int hub_master_probe(struct device *dev)
	{
	struct fsi_device *fsi_dev = to_fsi_dev(dev);
	struct fsi_master_hub *hub;
	uint32_t reg, links;
	__be32 __reg;
	int rc;

	rc = fsi_device_read(fsi_dev, FSI_MVER, &__reg, sizeof(__reg));
	if (rc)
	return rc;

	reg = be32_to_cpu(__reg);
	links = (reg >> 8) & 0xff;
	dev_dbg(dev, "hub version %08x (%d links)\n", reg, links);

	rc = fsi_slave_claim_range(fsi_dev->slave, FSI_HUB_LINK_OFFSET,
	FSI_HUB_LINK_SIZE * links);
	if (rc) {
	dev_err(dev, "can't claim slave address range for links");
	return rc;
	}

	hub = kzalloc(sizeof(*hub), GFP_KERNEL);
	if (!hub) {
	rc = -ENOMEM;
	goto err_release;
	}

	hub->addr = FSI_HUB_LINK_OFFSET;
	hub->size = FSI_HUB_LINK_SIZE * links;
	hub->upstream = fsi_dev;

	hub->master.dev.parent = dev;
	hub->master.dev.release = hub_master_release;
	hub->master.dev.of_node = of_node_get(dev_of_node(dev));

	hub->master.n_links = links;
	hub->master.read = hub_master_read;
	hub->master.write = hub_master_write;
	hub->master.send_break = hub_master_break;
	hub->master.link_enable = hub_master_link_enable;

	dev_set_drvdata(dev, hub);

	hub_master_init(hub);

	rc = fsi_master_register(&hub->master);
	if (rc)
	goto err_release;

	/* At this point, fsi_master_register performs the device_initialize(),
	* and holds the sole reference on master.dev. This means the device
	* will be freed (via ->release) during any subsequent call to
	* fsi_master_unregister. We add our own reference to it here, so we
	* can perform cleanup (in _remove()) without it being freed before
	* we're ready.
	*/
	get_device(&hub->master.dev);
	return 0;

	err_release:
	fsi_slave_release_range(fsi_dev->slave, FSI_HUB_LINK_OFFSET,
	FSI_HUB_LINK_SIZE * links);
	return rc;
	}

	static int hub_master_remove(struct device *dev)
	{
	struct fsi_master_hub *hub = dev_get_drvdata(dev);

	fsi_master_unregister(&hub->master);
	fsi_slave_release_range(hub->upstream->slave, hub->addr, hub->size);
	of_node_put(hub->master.dev.of_node);

	/*
	* master.dev will likely be ->release()ed after this, which free()s
	* the hub
	*/
	put_device(&hub->master.dev);

	return 0;
	}

	static struct fsi_device_id hub_master_ids[] = {
	{
	.engine_type = FSI_ENGID_HUB_MASTER,
	.version = FSI_VERSION_ANY,
	},
	{ 0 }
	};

	static struct fsi_driver hub_master_driver = {
	.id_table = hub_master_ids,
	.drv = {
	.name = "fsi-master-hub",
	.bus = &fsi_bus_type,
	.probe = hub_master_probe,
	.remove = hub_master_remove,
	}
	};

	module_fsi_driver(hub_master_driver);
	MODULE_LICENSE("GPL");