arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts - third_party/kernel - Git at Google

 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for CZ.NIC Turris Mox Board
  * 2019 by Marek Behun <marek.behun@nic.cz>
  */

 /dts-v1/;

 #include <dt-bindings/bus/moxtet.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include "armada-372x.dtsi"

 / {
 	model = "CZ.NIC Turris Mox Board";
 	compatible = "cznic,turris-mox", "marvell,armada3720",
 		     "marvell,armada3710";

 	aliases {
 		spi0 = &spi0;
 		ethernet1 = &eth1;
 	};

 	chosen {
 		stdout-path = "serial0:115200n8";
 	};

 	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
 	};

 	leds {
 		compatible = "gpio-leds";
 		red {
 			label = "mox:red:activity";
 			gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 	};

 	gpio-keys {
 		compatible = "gpio-keys";

 		reset {
 			label = "reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpiosb 20 GPIO_ACTIVE_LOW>;
 			debounce-interval = <60>;
 		};
 	};

 	exp_usb3_vbus: usb3-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb3-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		enable-active-high;
 		regulator-always-on;
 		gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>;
 	};

 	vsdc_reg: vsdc-reg {
 		compatible = "regulator-gpio";
 		regulator-name = "vsdc";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-boot-on;

 		gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
 		gpios-states = <0>;
 		states = <1800000 0x1
 			  3300000 0x0>;
 		enable-active-high;
 	};

 	vsdio_reg: vsdio-reg {
 		compatible = "regulator-gpio";
 		regulator-name = "vsdio";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-boot-on;

 		gpios = <&gpiosb 22 GPIO_ACTIVE_HIGH>;
 		gpios-states = <0>;
 		states = <1800000 0x1
 			  3300000 0x0>;
 		enable-active-high;
 	};

 	sdhci1_pwrseq: sdhci1-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpionb 19 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};

 	sfp: sfp {
 		compatible = "sff,sfp";
 		i2c-bus = <&i2c0>;
 		los-gpio = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>;
 		tx-fault-gpio = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>;
 		mod-def0-gpio = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>;
 		tx-disable-gpio = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>;
 		rate-select0-gpio = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>;

 		/* enabled by U-Boot if SFP module is present */
 		status = "disabled";
 	};
 };

 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <100000>;
 	status = "okay";

 	rtc@6f {
 		compatible = "microchip,mcp7940x";
 		reg = <0x6f>;
 	};
 };

 &pcie_reset_pins {
 	function = "gpio";
 };

 &pcie0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
 	status = "okay";
 	max-link-speed = <2>;
 	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
 	phys = <&comphy1 0>;

 	/* enabled by U-Boot if PCIe module is present */
 	status = "disabled";
 };

 &uart0 {
 	status = "okay";
 };

 &eth0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
 	phy-mode = "rgmii-id";
 	phy-handle = <&phy1>;
 	status = "okay";
 };

 &eth1 {
 	phy-mode = "2500base-x";
 	managed = "in-band-status";
 	phys = <&comphy0 1>;
 };

 &sdhci0 {
 	wp-inverted;
 	bus-width = <4>;
 	cd-gpios = <&gpionb 10 GPIO_ACTIVE_HIGH>;
 	vqmmc-supply = <&vsdc_reg>;
 	marvell,pad-type = "sd";
 	status = "okay";
 };

 &sdhci1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio_pins>;
 	non-removable;
 	bus-width = <4>;
 	marvell,pad-type = "sd";
 	vqmmc-supply = <&vsdio_reg>;
 	mmc-pwrseq = <&sdhci1_pwrseq>;
 	/* forbid SDR104 for FCC purposes */
 	sdhci-caps-mask = <0x2 0x0>;
 	status = "okay";
 };

 &spi0 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi_quad_pins &spi_cs1_pins>;
 	assigned-clocks = <&nb_periph_clk 7>;
 	assigned-clock-parents = <&tbg 1>;
 	assigned-clock-rates = <20000000>;

 	spi-flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <20000000>;

 		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;

 			partition@0 {
 				label = "secure-firmware";
 				reg = <0x0 0x20000>;
 			};

 			partition@20000 {
 				label = "u-boot";
 				reg = <0x20000 0x160000>;
 			};

 			partition@180000 {
 				label = "u-boot-env";
 				reg = <0x180000 0x10000>;
 			};

 			partition@190000 {
 				label = "Rescue system";
 				reg = <0x190000 0x660000>;
 			};

 			partition@7f0000 {
 				label = "dtb";
 				reg = <0x7f0000 0x10000>;
 			};
 		};
 	};

 	moxtet: moxtet@1 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "cznic,moxtet";
 		reg = <1>;
 		reset-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
 		spi-max-frequency = <10000000>;
 		spi-cpol;
 		spi-cpha;
 		interrupt-controller;
 		#interrupt-cells = <1>;
 		interrupt-parent = <&gpiosb>;
 		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 		status = "okay";

 		moxtet_sfp: gpio@0 {
 			compatible = "cznic,moxtet-gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
 			reg = <0>;
 			status = "disabled";
 		};
 	};
 };

 &usb2 {
 	status = "okay";
 };

 &comphy2 {
 	connector {
 		compatible = "usb-a-connector";
 		phy-supply = <&exp_usb3_vbus>;
 	};
 };

 &usb3 {
 	status = "okay";
 	phys = <&comphy2 0>;
 };

 &mdio {
 	pinctrl-names = "default";
 	pinctrl-0 = <&smi_pins>;
 	status = "okay";

 	phy1: ethernet-phy@1 {
 		reg = <1>;
 	};

 	/* switch nodes are enabled by U-Boot if modules are present */
 	switch0@10 {
 		compatible = "marvell,mv88e6190";
 		reg = <0x10 0>;
 		dsa,member = <0 0>;
 		interrupt-parent = <&moxtet>;
 		interrupts = <MOXTET_IRQ_PERIDOT(0)>;
 		status = "disabled";

 		mdio {
 			#address-cells = <1>;
 			#size-cells = <0>;

 			switch0phy1: switch0phy1@1 {
 				reg = <0x1>;
 			};

 			switch0phy2: switch0phy2@2 {
 				reg = <0x2>;
 			};

 			switch0phy3: switch0phy3@3 {
 				reg = <0x3>;
 			};

 			switch0phy4: switch0phy4@4 {
 				reg = <0x4>;
 			};

 			switch0phy5: switch0phy5@5 {
 				reg = <0x5>;
 			};

 			switch0phy6: switch0phy6@6 {
 				reg = <0x6>;
 			};

 			switch0phy7: switch0phy7@7 {
 				reg = <0x7>;
 			};

 			switch0phy8: switch0phy8@8 {
 				reg = <0x8>;
 			};
 		};

 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;

 			port@1 {
 				reg = <0x1>;
 				label = "lan1";
 				phy-handle = <&switch0phy1>;
 			};

 			port@2 {
 				reg = <0x2>;
 				label = "lan2";
 				phy-handle = <&switch0phy2>;
 			};

 			port@3 {
 				reg = <0x3>;
 				label = "lan3";
 				phy-handle = <&switch0phy3>;
 			};

 			port@4 {
 				reg = <0x4>;
 				label = "lan4";
 				phy-handle = <&switch0phy4>;
 			};

 			port@5 {
 				reg = <0x5>;
 				label = "lan5";
 				phy-handle = <&switch0phy5>;
 			};

 			port@6 {
 				reg = <0x6>;
 				label = "lan6";
 				phy-handle = <&switch0phy6>;
 			};

 			port@7 {
 				reg = <0x7>;
 				label = "lan7";
 				phy-handle = <&switch0phy7>;
 			};

 			port@8 {
 				reg = <0x8>;
 				label = "lan8";
 				phy-handle = <&switch0phy8>;
 			};

 			port@9 {
 				reg = <0x9>;
 				label = "cpu";
 				ethernet = <&eth1>;
 				phy-mode = "2500base-x";
 				managed = "in-band-status";
 			};

 			switch0port10: port@a {
 				reg = <0xa>;
 				label = "dsa";
 				phy-mode = "2500base-x";
 				managed = "in-band-status";
 				link = <&switch1port9 &switch2port9>;
 				status = "disabled";
 			};

 			port-sfp@a {
 				reg = <0xa>;
 				label = "sfp";
 				sfp = <&sfp>;
 				phy-mode = "sgmii";
 				managed = "in-band-status";
 				status = "disabled";
 			};
 		};
 	};

 	switch0@2 {
 		compatible = "marvell,mv88e6085";
 		reg = <0x2 0>;
 		dsa,member = <0 0>;
 		interrupt-parent = <&moxtet>;
 		interrupts = <MOXTET_IRQ_TOPAZ>;
 		status = "disabled";

 		mdio {
 			#address-cells = <1>;
 			#size-cells = <0>;

 			switch0phy1_topaz: switch0phy1@11 {
 				reg = <0x11>;
 			};

 			switch0phy2_topaz: switch0phy2@12 {
 				reg = <0x12>;
 			};

 			switch0phy3_topaz: switch0phy3@13 {
 				reg = <0x13>;
 			};

 			switch0phy4_topaz: switch0phy4@14 {
 				reg = <0x14>;
 			};
 		};

 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;

 			port@1 {
 				reg = <0x1>;
 				label = "lan1";
 				phy-handle = <&switch0phy1_topaz>;
 			};

 			port@2 {
 				reg = <0x2>;
 				label = "lan2";
 				phy-handle = <&switch0phy2_topaz>;
 			};

 			port@3 {
 				reg = <0x3>;
 				label = "lan3";
 				phy-handle = <&switch0phy3_topaz>;
 			};

 			port@4 {
 				reg = <0x4>;
 				label = "lan4";
 				phy-handle = <&switch0phy4_topaz>;
 			};

 			port@5 {
 				reg = <0x5>;
 				label = "cpu";
 				phy-mode = "2500base-x";
 				managed = "in-band-status";
 				ethernet = <&eth1>;
 			};
 		};
 	};

 	switch1@11 {
 		compatible = "marvell,mv88e6190";
 		reg = <0x11 0>;
 		dsa,member = <0 1>;
 		interrupt-parent = <&moxtet>;
 		interrupts = <MOXTET_IRQ_PERIDOT(1)>;
 		status = "disabled";

 		mdio {
 			#address-cells = <1>;
 			#size-cells = <0>;

 			switch1phy1: switch1phy1@1 {
 				reg = <0x1>;
 			};

 			switch1phy2: switch1phy2@2 {
 				reg = <0x2>;
 			};

 			switch1phy3: switch1phy3@3 {
 				reg = <0x3>;
 			};

 			switch1phy4: switch1phy4@4 {
 				reg = <0x4>;
 			};

 			switch1phy5: switch1phy5@5 {
 				reg = <0x5>;
 			};

 			switch1phy6: switch1phy6@6 {
 				reg = <0x6>;
 			};

 			switch1phy7: switch1phy7@7 {
 				reg = <0x7>;
 			};

 			switch1phy8: switch1phy8@8 {
 				reg = <0x8>;
 			};
 		};

 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;

 			port@1 {
 				reg = <0x1>;
 				label = "lan9";
 				phy-handle = <&switch1phy1>;
 			};

 			port@2 {
 				reg = <0x2>;
 				label = "lan10";
 				phy-handle = <&switch1phy2>;
 			};

 			port@3 {
 				reg = <0x3>;
 				label = "lan11";
 				phy-handle = <&switch1phy3>;
 			};

 			port@4 {
 				reg = <0x4>;
 				label = "lan12";
 				phy-handle = <&switch1phy4>;
 			};

 			port@5 {
 				reg = <0x5>;
 				label = "lan13";
 				phy-handle = <&switch1phy5>;
 			};

 			port@6 {
 				reg = <0x6>;
 				label = "lan14";
 				phy-handle = <&switch1phy6>;
 			};

 			port@7 {
 				reg = <0x7>;
 				label = "lan15";
 				phy-handle = <&switch1phy7>;
 			};

 			port@8 {
 				reg = <0x8>;
 				label = "lan16";
 				phy-handle = <&switch1phy8>;
 			};

 			switch1port9: port@9 {
 				reg = <0x9>;
 				label = "dsa";
 				phy-mode = "2500base-x";
 				managed = "in-band-status";
 				link = <&switch0port10>;
 			};

 			switch1port10: port@a {
 				reg = <0xa>;
 				label = "dsa";
 				phy-mode = "2500base-x";
 				managed = "in-band-status";
 				link = <&switch2port9>;
 				status = "disabled";
 			};

 			port-sfp@a {
 				reg = <0xa>;
 				label = "sfp";
 				sfp = <&sfp>;
 				phy-mode = "sgmii";
 				managed = "in-band-status";
 				status = "disabled";
 			};
 		};
 	};

 	switch1@2 {
 		compatible = "marvell,mv88e6085";
 		reg = <0x2 0>;
 		dsa,member = <0 1>;
 		interrupt-parent = <&moxtet>;
 		interrupts = <MOXTET_IRQ_TOPAZ>;
 		status = "disabled";

 		mdio {
 			#address-cells = <1>;
 			#size-cells = <0>;

 			switch1phy1_topaz: switch1phy1@11 {
 				reg = <0x11>;
 			};

 			switch1phy2_topaz: switch1phy2@12 {
 				reg = <0x12>;
 			};

 			switch1phy3_topaz: switch1phy3@13 {
 				reg = <0x13>;
 			};

 			switch1phy4_topaz: switch1phy4@14 {
 				reg = <0x14>;
 			};
 		};

 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;

 			port@1 {
 				reg = <0x1>;
 				label = "lan9";
 				phy-handle = <&switch1phy1_topaz>;
 			};

 			port@2 {
 				reg = <0x2>;
 				label = "lan10";
 				phy-handle = <&switch1phy2_topaz>;
 			};

 			port@3 {
 				reg = <0x3>;
 				label = "lan11";
 				phy-handle = <&switch1phy3_topaz>;
 			};

 			port@4 {
 				reg = <0x4>;
 				label = "lan12";
 				phy-handle = <&switch1phy4_topaz>;
 			};

 			port@5 {
 				reg = <0x5>;
 				label = "dsa";
 				phy-mode = "2500base-x";
 				managed = "in-band-status";
 				link = <&switch0port10>;
 			};
 		};
 	};

 	switch2@12 {
 		compatible = "marvell,mv88e6190";
 		reg = <0x12 0>;
 		dsa,member = <0 2>;
 		interrupt-parent = <&moxtet>;
 		interrupts = <MOXTET_IRQ_PERIDOT(2)>;
 		status = "disabled";

 		mdio {
 			#address-cells = <1>;
 			#size-cells = <0>;

 			switch2phy1: switch2phy1@1 {
 				reg = <0x1>;
 			};

 			switch2phy2: switch2phy2@2 {
 				reg = <0x2>;
 			};

 			switch2phy3: switch2phy3@3 {
 				reg = <0x3>;
 			};

 			switch2phy4: switch2phy4@4 {
 				reg = <0x4>;
 			};

 			switch2phy5: switch2phy5@5 {
 				reg = <0x5>;
 			};

 			switch2phy6: switch2phy6@6 {
 				reg = <0x6>;
 			};

 			switch2phy7: switch2phy7@7 {
 				reg = <0x7>;
 			};

 			switch2phy8: switch2phy8@8 {
 				reg = <0x8>;
 			};
 		};

 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;

 			port@1 {
 				reg = <0x1>;
 				label = "lan17";
 				phy-handle = <&switch2phy1>;
 			};

 			port@2 {
 				reg = <0x2>;
 				label = "lan18";
 				phy-handle = <&switch2phy2>;
 			};

 			port@3 {
 				reg = <0x3>;
 				label = "lan19";
 				phy-handle = <&switch2phy3>;
 			};

 			port@4 {
 				reg = <0x4>;
 				label = "lan20";
 				phy-handle = <&switch2phy4>;
 			};

 			port@5 {
 				reg = <0x5>;
 				label = "lan21";
 				phy-handle = <&switch2phy5>;
 			};

 			port@6 {
 				reg = <0x6>;
 				label = "lan22";
 				phy-handle = <&switch2phy6>;
 			};

 			port@7 {
 				reg = <0x7>;
 				label = "lan23";
 				phy-handle = <&switch2phy7>;
 			};

 			port@8 {
 				reg = <0x8>;
 				label = "lan24";
 				phy-handle = <&switch2phy8>;
 			};

 			switch2port9: port@9 {
 				reg = <0x9>;
 				label = "dsa";
 				phy-mode = "2500base-x";
 				managed = "in-band-status";
 				link = <&switch1port10 &switch0port10>;
 			};

 			port-sfp@a {
 				reg = <0xa>;
 				label = "sfp";
 				sfp = <&sfp>;
 				phy-mode = "sgmii";
 				managed = "in-band-status";
 				status = "disabled";
 			};
 		};
 	};

 	switch2@2 {
 		compatible = "marvell,mv88e6085";
 		reg = <0x2 0>;
 		dsa,member = <0 2>;
 		interrupt-parent = <&moxtet>;
 		interrupts = <MOXTET_IRQ_TOPAZ>;
 		status = "disabled";

 		mdio {
 			#address-cells = <1>;
 			#size-cells = <0>;

 			switch2phy1_topaz: switch2phy1@11 {
 				reg = <0x11>;
 			};

 			switch2phy2_topaz: switch2phy2@12 {
 				reg = <0x12>;
 			};

 			switch2phy3_topaz: switch2phy3@13 {
 				reg = <0x13>;
 			};

 			switch2phy4_topaz: switch2phy4@14 {
 				reg = <0x14>;
 			};
 		};

 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;

 			port@1 {
 				reg = <0x1>;
 				label = "lan17";
 				phy-handle = <&switch2phy1_topaz>;
 			};

 			port@2 {
 				reg = <0x2>;
 				label = "lan18";
 				phy-handle = <&switch2phy2_topaz>;
 			};

 			port@3 {
 				reg = <0x3>;
 				label = "lan19";
 				phy-handle = <&switch2phy3_topaz>;
 			};

 			port@4 {
 				reg = <0x4>;
 				label = "lan20";
 				phy-handle = <&switch2phy4_topaz>;
 			};

 			port@5 {
 				reg = <0x5>;
 				label = "dsa";
 				phy-mode = "2500base-x";
 				managed = "in-band-status";
 				link = <&switch1port10 &switch0port10>;
 			};
 		};
 	};
 };
	// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
	/*
	* Device Tree file for CZ.NIC Turris Mox Board
	* 2019 by Marek Behun <marek.behun@nic.cz>
	*/

	/dts-v1/;

	#include <dt-bindings/bus/moxtet.h>
	#include <dt-bindings/gpio/gpio.h>
	#include <dt-bindings/input/input.h>
	#include "armada-372x.dtsi"

	/ {
	model = "CZ.NIC Turris Mox Board";
	compatible = "cznic,turris-mox", "marvell,armada3720",
	"marvell,armada3710";

	aliases {
	spi0 = &spi0;
	ethernet1 = &eth1;
	};

	chosen {
	stdout-path = "serial0:115200n8";
	};

	memory@0 {
	device_type = "memory";
	reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
	};

	leds {
	compatible = "gpio-leds";
	red {
	label = "mox:red:activity";
	gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>;
	linux,default-trigger = "default-on";
	};
	};

	gpio-keys {
	compatible = "gpio-keys";

	reset {
	label = "reset";
	linux,code = <KEY_RESTART>;
	gpios = <&gpiosb 20 GPIO_ACTIVE_LOW>;
	debounce-interval = <60>;
	};
	};

	exp_usb3_vbus: usb3-vbus {
	compatible = "regulator-fixed";
	regulator-name = "usb3-vbus";
	regulator-min-microvolt = <5000000>;
	regulator-max-microvolt = <5000000>;
	enable-active-high;
	regulator-always-on;
	gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>;
	};

	vsdc_reg: vsdc-reg {
	compatible = "regulator-gpio";
	regulator-name = "vsdc";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <3300000>;
	regulator-boot-on;

	gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
	gpios-states = <0>;
	states = <1800000 0x1
	3300000 0x0>;
	enable-active-high;
	};

	vsdio_reg: vsdio-reg {
	compatible = "regulator-gpio";
	regulator-name = "vsdio";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <3300000>;
	regulator-boot-on;

	gpios = <&gpiosb 22 GPIO_ACTIVE_HIGH>;
	gpios-states = <0>;
	states = <1800000 0x1
	3300000 0x0>;
	enable-active-high;
	};

	sdhci1_pwrseq: sdhci1-pwrseq {
	compatible = "mmc-pwrseq-simple";
	reset-gpios = <&gpionb 19 GPIO_ACTIVE_HIGH>;
	status = "okay";
	};

	sfp: sfp {
	compatible = "sff,sfp";
	i2c-bus = <&i2c0>;
	los-gpio = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>;
	tx-fault-gpio = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>;
	mod-def0-gpio = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>;
	tx-disable-gpio = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>;
	rate-select0-gpio = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>;

	/* enabled by U-Boot if SFP module is present */
	status = "disabled";
	};
	};

	&i2c0 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_pins>;
	clock-frequency = <100000>;
	status = "okay";

	rtc@6f {
	compatible = "microchip,mcp7940x";
	reg = <0x6f>;
	};
	};

	&pcie_reset_pins {
	function = "gpio";
	};

	&pcie0 {
	pinctrl-names = "default";
	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
	status = "okay";
	max-link-speed = <2>;
	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
	phys = <&comphy1 0>;

	/* enabled by U-Boot if PCIe module is present */
	status = "disabled";
	};

	&uart0 {
	status = "okay";
	};

	&eth0 {
	pinctrl-names = "default";
	pinctrl-0 = <&rgmii_pins>;
	phy-mode = "rgmii-id";
	phy-handle = <&phy1>;
	status = "okay";
	};

	&eth1 {
	phy-mode = "2500base-x";
	managed = "in-band-status";
	phys = <&comphy0 1>;
	};

	&sdhci0 {
	wp-inverted;
	bus-width = <4>;
	cd-gpios = <&gpionb 10 GPIO_ACTIVE_HIGH>;
	vqmmc-supply = <&vsdc_reg>;
	marvell,pad-type = "sd";
	status = "okay";
	};

	&sdhci1 {
	pinctrl-names = "default";
	pinctrl-0 = <&sdio_pins>;
	non-removable;
	bus-width = <4>;
	marvell,pad-type = "sd";
	vqmmc-supply = <&vsdio_reg>;
	mmc-pwrseq = <&sdhci1_pwrseq>;
	/* forbid SDR104 for FCC purposes */
	sdhci-caps-mask = <0x2 0x0>;
	status = "okay";
	};

	&spi0 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&spi_quad_pins &spi_cs1_pins>;
	assigned-clocks = <&nb_periph_clk 7>;
	assigned-clock-parents = <&tbg 1>;
	assigned-clock-rates = <20000000>;

	spi-flash@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "jedec,spi-nor";
	reg = <0>;
	spi-max-frequency = <20000000>;

	partitions {
	compatible = "fixed-partitions";
	#address-cells = <1>;
	#size-cells = <1>;

	partition@0 {
	label = "secure-firmware";
	reg = <0x0 0x20000>;
	};

	partition@20000 {
	label = "u-boot";
	reg = <0x20000 0x160000>;
	};

	partition@180000 {
	label = "u-boot-env";
	reg = <0x180000 0x10000>;
	};

	partition@190000 {
	label = "Rescue system";
	reg = <0x190000 0x660000>;
	};

	partition@7f0000 {
	label = "dtb";
	reg = <0x7f0000 0x10000>;
	};
	};
	};

	moxtet: moxtet@1 {
	#address-cells = <1>;
	#size-cells = <0>;
	compatible = "cznic,moxtet";
	reg = <1>;
	reset-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
	spi-max-frequency = <10000000>;
	spi-cpol;
	spi-cpha;
	interrupt-controller;
	#interrupt-cells = <1>;
	interrupt-parent = <&gpiosb>;
	interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
	status = "okay";

	moxtet_sfp: gpio@0 {
	compatible = "cznic,moxtet-gpio";
	gpio-controller;
	#gpio-cells = <2>;
	reg = <0>;
	status = "disabled";
	};
	};
	};

	&usb2 {
	status = "okay";
	};

	&comphy2 {
	connector {
	compatible = "usb-a-connector";
	phy-supply = <&exp_usb3_vbus>;
	};
	};

	&usb3 {
	status = "okay";
	phys = <&comphy2 0>;
	};

	&mdio {
	pinctrl-names = "default";
	pinctrl-0 = <&smi_pins>;
	status = "okay";

	phy1: ethernet-phy@1 {
	reg = <1>;
	};

	/* switch nodes are enabled by U-Boot if modules are present */
	switch0@10 {
	compatible = "marvell,mv88e6190";
	reg = <0x10 0>;
	dsa,member = <0 0>;
	interrupt-parent = <&moxtet>;
	interrupts = <MOXTET_IRQ_PERIDOT(0)>;
	status = "disabled";

	mdio {
	#address-cells = <1>;
	#size-cells = <0>;

	switch0phy1: switch0phy1@1 {
	reg = <0x1>;
	};

	switch0phy2: switch0phy2@2 {
	reg = <0x2>;
	};

	switch0phy3: switch0phy3@3 {
	reg = <0x3>;
	};

	switch0phy4: switch0phy4@4 {
	reg = <0x4>;
	};

	switch0phy5: switch0phy5@5 {
	reg = <0x5>;
	};

	switch0phy6: switch0phy6@6 {
	reg = <0x6>;
	};

	switch0phy7: switch0phy7@7 {
	reg = <0x7>;
	};

	switch0phy8: switch0phy8@8 {
	reg = <0x8>;
	};
	};

	ports {
	#address-cells = <1>;
	#size-cells = <0>;

	port@1 {
	reg = <0x1>;
	label = "lan1";
	phy-handle = <&switch0phy1>;
	};

	port@2 {
	reg = <0x2>;
	label = "lan2";
	phy-handle = <&switch0phy2>;
	};

	port@3 {
	reg = <0x3>;
	label = "lan3";
	phy-handle = <&switch0phy3>;
	};

	port@4 {
	reg = <0x4>;
	label = "lan4";
	phy-handle = <&switch0phy4>;
	};

	port@5 {
	reg = <0x5>;
	label = "lan5";
	phy-handle = <&switch0phy5>;
	};

	port@6 {
	reg = <0x6>;
	label = "lan6";
	phy-handle = <&switch0phy6>;
	};

	port@7 {
	reg = <0x7>;
	label = "lan7";
	phy-handle = <&switch0phy7>;
	};

	port@8 {
	reg = <0x8>;
	label = "lan8";
	phy-handle = <&switch0phy8>;
	};

	port@9 {
	reg = <0x9>;
	label = "cpu";
	ethernet = <&eth1>;
	phy-mode = "2500base-x";
	managed = "in-band-status";
	};

	switch0port10: port@a {
	reg = <0xa>;
	label = "dsa";
	phy-mode = "2500base-x";
	managed = "in-band-status";
	link = <&switch1port9 &switch2port9>;
	status = "disabled";
	};

	port-sfp@a {
	reg = <0xa>;
	label = "sfp";
	sfp = <&sfp>;
	phy-mode = "sgmii";
	managed = "in-band-status";
	status = "disabled";
	};
	};
	};

	switch0@2 {
	compatible = "marvell,mv88e6085";
	reg = <0x2 0>;
	dsa,member = <0 0>;
	interrupt-parent = <&moxtet>;
	interrupts = <MOXTET_IRQ_TOPAZ>;
	status = "disabled";

	mdio {
	#address-cells = <1>;
	#size-cells = <0>;

	switch0phy1_topaz: switch0phy1@11 {
	reg = <0x11>;
	};

	switch0phy2_topaz: switch0phy2@12 {
	reg = <0x12>;
	};

	switch0phy3_topaz: switch0phy3@13 {
	reg = <0x13>;
	};

	switch0phy4_topaz: switch0phy4@14 {
	reg = <0x14>;
	};
	};

	ports {
	#address-cells = <1>;
	#size-cells = <0>;

	port@1 {
	reg = <0x1>;
	label = "lan1";
	phy-handle = <&switch0phy1_topaz>;
	};

	port@2 {
	reg = <0x2>;
	label = "lan2";
	phy-handle = <&switch0phy2_topaz>;
	};

	port@3 {
	reg = <0x3>;
	label = "lan3";
	phy-handle = <&switch0phy3_topaz>;
	};

	port@4 {
	reg = <0x4>;
	label = "lan4";
	phy-handle = <&switch0phy4_topaz>;
	};

	port@5 {
	reg = <0x5>;
	label = "cpu";
	phy-mode = "2500base-x";
	managed = "in-band-status";
	ethernet = <&eth1>;
	};
	};
	};

	switch1@11 {
	compatible = "marvell,mv88e6190";
	reg = <0x11 0>;
	dsa,member = <0 1>;
	interrupt-parent = <&moxtet>;
	interrupts = <MOXTET_IRQ_PERIDOT(1)>;
	status = "disabled";

	mdio {
	#address-cells = <1>;
	#size-cells = <0>;

	switch1phy1: switch1phy1@1 {
	reg = <0x1>;
	};

	switch1phy2: switch1phy2@2 {
	reg = <0x2>;
	};

	switch1phy3: switch1phy3@3 {
	reg = <0x3>;
	};

	switch1phy4: switch1phy4@4 {
	reg = <0x4>;
	};

	switch1phy5: switch1phy5@5 {
	reg = <0x5>;
	};

	switch1phy6: switch1phy6@6 {
	reg = <0x6>;
	};

	switch1phy7: switch1phy7@7 {
	reg = <0x7>;
	};

	switch1phy8: switch1phy8@8 {
	reg = <0x8>;
	};
	};

	ports {
	#address-cells = <1>;
	#size-cells = <0>;

	port@1 {
	reg = <0x1>;
	label = "lan9";
	phy-handle = <&switch1phy1>;
	};

	port@2 {
	reg = <0x2>;
	label = "lan10";
	phy-handle = <&switch1phy2>;
	};

	port@3 {
	reg = <0x3>;
	label = "lan11";
	phy-handle = <&switch1phy3>;
	};

	port@4 {
	reg = <0x4>;
	label = "lan12";
	phy-handle = <&switch1phy4>;
	};

	port@5 {
	reg = <0x5>;
	label = "lan13";
	phy-handle = <&switch1phy5>;
	};

	port@6 {
	reg = <0x6>;
	label = "lan14";
	phy-handle = <&switch1phy6>;
	};

	port@7 {
	reg = <0x7>;
	label = "lan15";
	phy-handle = <&switch1phy7>;
	};

	port@8 {
	reg = <0x8>;
	label = "lan16";
	phy-handle = <&switch1phy8>;
	};

	switch1port9: port@9 {
	reg = <0x9>;
	label = "dsa";
	phy-mode = "2500base-x";
	managed = "in-band-status";
	link = <&switch0port10>;
	};

	switch1port10: port@a {
	reg = <0xa>;
	label = "dsa";
	phy-mode = "2500base-x";
	managed = "in-band-status";
	link = <&switch2port9>;
	status = "disabled";
	};

	port-sfp@a {
	reg = <0xa>;
	label = "sfp";
	sfp = <&sfp>;
	phy-mode = "sgmii";
	managed = "in-band-status";
	status = "disabled";
	};
	};
	};

	switch1@2 {
	compatible = "marvell,mv88e6085";
	reg = <0x2 0>;
	dsa,member = <0 1>;
	interrupt-parent = <&moxtet>;
	interrupts = <MOXTET_IRQ_TOPAZ>;
	status = "disabled";

	mdio {
	#address-cells = <1>;
	#size-cells = <0>;

	switch1phy1_topaz: switch1phy1@11 {
	reg = <0x11>;
	};

	switch1phy2_topaz: switch1phy2@12 {
	reg = <0x12>;
	};

	switch1phy3_topaz: switch1phy3@13 {
	reg = <0x13>;
	};

	switch1phy4_topaz: switch1phy4@14 {
	reg = <0x14>;
	};
	};

	ports {
	#address-cells = <1>;
	#size-cells = <0>;

	port@1 {
	reg = <0x1>;
	label = "lan9";
	phy-handle = <&switch1phy1_topaz>;
	};

	port@2 {
	reg = <0x2>;
	label = "lan10";
	phy-handle = <&switch1phy2_topaz>;
	};

	port@3 {
	reg = <0x3>;
	label = "lan11";
	phy-handle = <&switch1phy3_topaz>;
	};

	port@4 {
	reg = <0x4>;
	label = "lan12";
	phy-handle = <&switch1phy4_topaz>;
	};

	port@5 {
	reg = <0x5>;
	label = "dsa";
	phy-mode = "2500base-x";
	managed = "in-band-status";
	link = <&switch0port10>;
	};
	};
	};

	switch2@12 {
	compatible = "marvell,mv88e6190";
	reg = <0x12 0>;
	dsa,member = <0 2>;
	interrupt-parent = <&moxtet>;
	interrupts = <MOXTET_IRQ_PERIDOT(2)>;
	status = "disabled";

	mdio {
	#address-cells = <1>;
	#size-cells = <0>;

	switch2phy1: switch2phy1@1 {
	reg = <0x1>;
	};

	switch2phy2: switch2phy2@2 {
	reg = <0x2>;
	};

	switch2phy3: switch2phy3@3 {
	reg = <0x3>;
	};

	switch2phy4: switch2phy4@4 {
	reg = <0x4>;
	};

	switch2phy5: switch2phy5@5 {
	reg = <0x5>;
	};

	switch2phy6: switch2phy6@6 {
	reg = <0x6>;
	};

	switch2phy7: switch2phy7@7 {
	reg = <0x7>;
	};

	switch2phy8: switch2phy8@8 {
	reg = <0x8>;
	};
	};

	ports {
	#address-cells = <1>;
	#size-cells = <0>;

	port@1 {
	reg = <0x1>;
	label = "lan17";
	phy-handle = <&switch2phy1>;
	};

	port@2 {
	reg = <0x2>;
	label = "lan18";
	phy-handle = <&switch2phy2>;
	};

	port@3 {
	reg = <0x3>;
	label = "lan19";
	phy-handle = <&switch2phy3>;
	};

	port@4 {
	reg = <0x4>;
	label = "lan20";
	phy-handle = <&switch2phy4>;
	};

	port@5 {
	reg = <0x5>;
	label = "lan21";
	phy-handle = <&switch2phy5>;
	};

	port@6 {
	reg = <0x6>;
	label = "lan22";
	phy-handle = <&switch2phy6>;
	};

	port@7 {
	reg = <0x7>;
	label = "lan23";
	phy-handle = <&switch2phy7>;
	};

	port@8 {
	reg = <0x8>;
	label = "lan24";
	phy-handle = <&switch2phy8>;
	};

	switch2port9: port@9 {
	reg = <0x9>;
	label = "dsa";
	phy-mode = "2500base-x";
	managed = "in-band-status";
	link = <&switch1port10 &switch0port10>;
	};

	port-sfp@a {
	reg = <0xa>;
	label = "sfp";
	sfp = <&sfp>;
	phy-mode = "sgmii";
	managed = "in-band-status";
	status = "disabled";
	};
	};
	};

	switch2@2 {
	compatible = "marvell,mv88e6085";
	reg = <0x2 0>;
	dsa,member = <0 2>;
	interrupt-parent = <&moxtet>;
	interrupts = <MOXTET_IRQ_TOPAZ>;
	status = "disabled";

	mdio {
	#address-cells = <1>;
	#size-cells = <0>;

	switch2phy1_topaz: switch2phy1@11 {
	reg = <0x11>;
	};

	switch2phy2_topaz: switch2phy2@12 {
	reg = <0x12>;
	};

	switch2phy3_topaz: switch2phy3@13 {
	reg = <0x13>;
	};

	switch2phy4_topaz: switch2phy4@14 {
	reg = <0x14>;
	};
	};

	ports {
	#address-cells = <1>;
	#size-cells = <0>;

	port@1 {
	reg = <0x1>;
	label = "lan17";
	phy-handle = <&switch2phy1_topaz>;
	};

	port@2 {
	reg = <0x2>;
	label = "lan18";
	phy-handle = <&switch2phy2_topaz>;
	};

	port@3 {
	reg = <0x3>;
	label = "lan19";
	phy-handle = <&switch2phy3_topaz>;
	};

	port@4 {
	reg = <0x4>;
	label = "lan20";
	phy-handle = <&switch2phy4_topaz>;
	};

	port@5 {
	reg = <0x5>;
	label = "dsa";
	phy-mode = "2500base-x";
	managed = "in-band-status";
	link = <&switch1port10 &switch0port10>;
	};
	};
	};
	};