blob: bb3ba7bfe6a575e762e97293d25758e331ed7451 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* "RTT as Real Time Clock" driver for AT91SAM9 SoC family
*
* (C) 2007 Michel Benoit
*
* Based on rtc-at91rm9200.c by Rick Bronson
*/
#include <linux/clk.h>
#include <linux/interrupt.h>
#include <linux/ioctl.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/rtc.h>
#include <linux/slab.h>
#include <linux/suspend.h>
#include <linux/time.h>
/*
* This driver uses two configurable hardware resources that live in the
* AT91SAM9 backup power domain (intended to be powered at all times)
* to implement the Real Time Clock interfaces
*
* - A "Real-time Timer" (RTT) counts up in seconds from a base time.
* We can't assign the counter value (CRTV) ... but we can reset it.
*
* - One of the "General Purpose Backup Registers" (GPBRs) holds the
* base time, normally an offset from the beginning of the POSIX
* epoch (1970-Jan-1 00:00:00 UTC). Some systems also include the
* local timezone's offset.
*
* The RTC's value is the RTT counter plus that offset. The RTC's alarm
* is likewise a base (ALMV) plus that offset.
*
* Not all RTTs will be used as RTCs; some systems have multiple RTTs to
* choose from, or a "real" RTC module. All systems have multiple GPBR
* registers available, likewise usable for more than "RTC" support.
*/
#define AT91_RTT_MR 0x00 /* Real-time Mode Register */
#define AT91_RTT_RTPRES (0xffff << 0) /* Timer Prescaler Value */
#define AT91_RTT_ALMIEN BIT(16) /* Alarm Interrupt Enable */
#define AT91_RTT_RTTINCIEN BIT(17) /* Increment Interrupt Enable */
#define AT91_RTT_RTTRST BIT(18) /* Timer Restart */
#define AT91_RTT_AR 0x04 /* Real-time Alarm Register */
#define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */
#define AT91_RTT_VR 0x08 /* Real-time Value Register */
#define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */
#define AT91_RTT_SR 0x0c /* Real-time Status Register */
#define AT91_RTT_ALMS BIT(0) /* Alarm Status */
#define AT91_RTT_RTTINC BIT(1) /* Timer Increment */
/*
* We store ALARM_DISABLED in ALMV to record that no alarm is set.
* It's also the reset value for that field.
*/
#define ALARM_DISABLED ((u32)~0)
struct sam9_rtc {
void __iomem *rtt;
struct rtc_device *rtcdev;
u32 imr;
struct regmap *gpbr;
unsigned int gpbr_offset;
int irq;
struct clk *sclk;
bool suspended;
unsigned long events;
spinlock_t lock;
};
#define rtt_readl(rtc, field) \
readl((rtc)->rtt + AT91_RTT_ ## field)
#define rtt_writel(rtc, field, val) \
writel((val), (rtc)->rtt + AT91_RTT_ ## field)
static inline unsigned int gpbr_readl(struct sam9_rtc *rtc)
{
unsigned int val;
regmap_read(rtc->gpbr, rtc->gpbr_offset, &val);
return val;
}
static inline void gpbr_writel(struct sam9_rtc *rtc, unsigned int val)
{
regmap_write(rtc->gpbr, rtc->gpbr_offset, val);
}
/*
* Read current time and date in RTC
*/
static int at91_rtc_readtime(struct device *dev, struct rtc_time *tm)
{
struct sam9_rtc *rtc = dev_get_drvdata(dev);
u32 secs, secs2;
u32 offset;
/* read current time offset */
offset = gpbr_readl(rtc);
if (offset == 0)
return -EILSEQ;
/* reread the counter to help sync the two clock domains */
secs = rtt_readl(rtc, VR);
secs2 = rtt_readl(rtc, VR);
if (secs != secs2)
secs = rtt_readl(rtc, VR);
rtc_time64_to_tm(offset + secs, tm);
dev_dbg(dev, "%s: %ptR\n", __func__, tm);
return 0;
}
/*
* Set current time and date in RTC
*/
static int at91_rtc_settime(struct device *dev, struct rtc_time *tm)
{
struct sam9_rtc *rtc = dev_get_drvdata(dev);
u32 offset, alarm, mr;
unsigned long secs;
dev_dbg(dev, "%s: %ptR\n", __func__, tm);
secs = rtc_tm_to_time64(tm);
mr = rtt_readl(rtc, MR);
/* disable interrupts */
rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
/* read current time offset */
offset = gpbr_readl(rtc);
/* store the new base time in a battery backup register */
secs += 1;
gpbr_writel(rtc, secs);
/* adjust the alarm time for the new base */
alarm = rtt_readl(rtc, AR);
if (alarm != ALARM_DISABLED) {
if (offset > secs) {
/* time jumped backwards, increase time until alarm */
alarm += (offset - secs);
} else if ((alarm + offset) > secs) {
/* time jumped forwards, decrease time until alarm */
alarm -= (secs - offset);
} else {
/* time jumped past the alarm, disable alarm */
alarm = ALARM_DISABLED;
mr &= ~AT91_RTT_ALMIEN;
}
rtt_writel(rtc, AR, alarm);
}
/* reset the timer, and re-enable interrupts */
rtt_writel(rtc, MR, mr | AT91_RTT_RTTRST);
return 0;
}
static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct sam9_rtc *rtc = dev_get_drvdata(dev);
struct rtc_time *tm = &alrm->time;
u32 alarm = rtt_readl(rtc, AR);
u32 offset;
offset = gpbr_readl(rtc);
if (offset == 0)
return -EILSEQ;
memset(alrm, 0, sizeof(*alrm));
if (alarm != ALARM_DISABLED && offset != 0) {
rtc_time64_to_tm(offset + alarm, tm);
dev_dbg(dev, "%s: %ptR\n", __func__, tm);
if (rtt_readl(rtc, MR) & AT91_RTT_ALMIEN)
alrm->enabled = 1;
}
return 0;
}
static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
{
struct sam9_rtc *rtc = dev_get_drvdata(dev);
struct rtc_time *tm = &alrm->time;
unsigned long secs;
u32 offset;
u32 mr;
secs = rtc_tm_to_time64(tm);
offset = gpbr_readl(rtc);
if (offset == 0) {
/* time is not set */
return -EILSEQ;
}
mr = rtt_readl(rtc, MR);
rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN);
/* alarm in the past? finish and leave disabled */
if (secs <= offset) {
rtt_writel(rtc, AR, ALARM_DISABLED);
return 0;
}
/* else set alarm and maybe enable it */
rtt_writel(rtc, AR, secs - offset);
if (alrm->enabled)
rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN);
dev_dbg(dev, "%s: %ptR\n", __func__, tm);
return 0;
}
static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
struct sam9_rtc *rtc = dev_get_drvdata(dev);
u32 mr = rtt_readl(rtc, MR);
dev_dbg(dev, "alarm_irq_enable: enabled=%08x, mr %08x\n", enabled, mr);
if (enabled)
rtt_writel(rtc, MR, mr | AT91_RTT_ALMIEN);
else
rtt_writel(rtc, MR, mr & ~AT91_RTT_ALMIEN);
return 0;
}
/*
* Provide additional RTC information in /proc/driver/rtc
*/
static int at91_rtc_proc(struct device *dev, struct seq_file *seq)
{
struct sam9_rtc *rtc = dev_get_drvdata(dev);
u32 mr = rtt_readl(rtc, MR);
seq_printf(seq, "update_IRQ\t: %s\n",
(mr & AT91_RTT_RTTINCIEN) ? "yes" : "no");
return 0;
}
static irqreturn_t at91_rtc_cache_events(struct sam9_rtc *rtc)
{
u32 sr, mr;
/* Shared interrupt may be for another device. Note: reading
* SR clears it, so we must only read it in this irq handler!
*/
mr = rtt_readl(rtc, MR) & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
sr = rtt_readl(rtc, SR) & (mr >> 16);
if (!sr)
return IRQ_NONE;
/* alarm status */
if (sr & AT91_RTT_ALMS)
rtc->events |= (RTC_AF | RTC_IRQF);
/* timer update/increment */
if (sr & AT91_RTT_RTTINC)
rtc->events |= (RTC_UF | RTC_IRQF);
return IRQ_HANDLED;
}
static void at91_rtc_flush_events(struct sam9_rtc *rtc)
{
if (!rtc->events)
return;
rtc_update_irq(rtc->rtcdev, 1, rtc->events);
rtc->events = 0;
pr_debug("%s: num=%ld, events=0x%02lx\n", __func__,
rtc->events >> 8, rtc->events & 0x000000FF);
}
/*
* IRQ handler for the RTC
*/
static irqreturn_t at91_rtc_interrupt(int irq, void *_rtc)
{
struct sam9_rtc *rtc = _rtc;
int ret;
spin_lock(&rtc->lock);
ret = at91_rtc_cache_events(rtc);
/* We're called in suspended state */
if (rtc->suspended) {
/* Mask irqs coming from this peripheral */
rtt_writel(rtc, MR,
rtt_readl(rtc, MR) &
~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
/* Trigger a system wakeup */
pm_system_wakeup();
} else {
at91_rtc_flush_events(rtc);
}
spin_unlock(&rtc->lock);
return ret;
}
static const struct rtc_class_ops at91_rtc_ops = {
.read_time = at91_rtc_readtime,
.set_time = at91_rtc_settime,
.read_alarm = at91_rtc_readalarm,
.set_alarm = at91_rtc_setalarm,
.proc = at91_rtc_proc,
.alarm_irq_enable = at91_rtc_alarm_irq_enable,
};
/*
* Initialize and install RTC driver
*/
static int at91_rtc_probe(struct platform_device *pdev)
{
struct resource *r;
struct sam9_rtc *rtc;
int ret, irq;
u32 mr;
unsigned int sclk_rate;
struct of_phandle_args args;
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
if (!rtc)
return -ENOMEM;
spin_lock_init(&rtc->lock);
rtc->irq = irq;
/* platform setup code should have handled this; sigh */
if (!device_can_wakeup(&pdev->dev))
device_init_wakeup(&pdev->dev, 1);
platform_set_drvdata(pdev, rtc);
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
rtc->rtt = devm_ioremap_resource(&pdev->dev, r);
if (IS_ERR(rtc->rtt))
return PTR_ERR(rtc->rtt);
ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
"atmel,rtt-rtc-time-reg", 1, 0,
&args);
if (ret)
return ret;
rtc->gpbr = syscon_node_to_regmap(args.np);
rtc->gpbr_offset = args.args[0];
if (IS_ERR(rtc->gpbr)) {
dev_err(&pdev->dev, "failed to retrieve gpbr regmap, aborting.\n");
return -ENOMEM;
}
rtc->sclk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(rtc->sclk))
return PTR_ERR(rtc->sclk);
ret = clk_prepare_enable(rtc->sclk);
if (ret) {
dev_err(&pdev->dev, "Could not enable slow clock\n");
return ret;
}
sclk_rate = clk_get_rate(rtc->sclk);
if (!sclk_rate || sclk_rate > AT91_RTT_RTPRES) {
dev_err(&pdev->dev, "Invalid slow clock rate\n");
ret = -EINVAL;
goto err_clk;
}
mr = rtt_readl(rtc, MR);
/* unless RTT is counting at 1 Hz, re-initialize it */
if ((mr & AT91_RTT_RTPRES) != sclk_rate) {
mr = AT91_RTT_RTTRST | (sclk_rate & AT91_RTT_RTPRES);
gpbr_writel(rtc, 0);
}
/* disable all interrupts (same as on shutdown path) */
mr &= ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
rtt_writel(rtc, MR, mr);
rtc->rtcdev = devm_rtc_allocate_device(&pdev->dev);
if (IS_ERR(rtc->rtcdev)) {
ret = PTR_ERR(rtc->rtcdev);
goto err_clk;
}
rtc->rtcdev->ops = &at91_rtc_ops;
rtc->rtcdev->range_max = U32_MAX;
/* register irq handler after we know what name we'll use */
ret = devm_request_irq(&pdev->dev, rtc->irq, at91_rtc_interrupt,
IRQF_SHARED | IRQF_COND_SUSPEND,
dev_name(&rtc->rtcdev->dev), rtc);
if (ret) {
dev_dbg(&pdev->dev, "can't share IRQ %d?\n", rtc->irq);
goto err_clk;
}
/* NOTE: sam9260 rev A silicon has a ROM bug which resets the
* RTT on at least some reboots. If you have that chip, you must
* initialize the time from some external source like a GPS, wall
* clock, discrete RTC, etc
*/
if (gpbr_readl(rtc) == 0)
dev_warn(&pdev->dev, "%s: SET TIME!\n",
dev_name(&rtc->rtcdev->dev));
return rtc_register_device(rtc->rtcdev);
err_clk:
clk_disable_unprepare(rtc->sclk);
return ret;
}
/*
* Disable and remove the RTC driver
*/
static int at91_rtc_remove(struct platform_device *pdev)
{
struct sam9_rtc *rtc = platform_get_drvdata(pdev);
u32 mr = rtt_readl(rtc, MR);
/* disable all interrupts */
rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
clk_disable_unprepare(rtc->sclk);
return 0;
}
static void at91_rtc_shutdown(struct platform_device *pdev)
{
struct sam9_rtc *rtc = platform_get_drvdata(pdev);
u32 mr = rtt_readl(rtc, MR);
rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
rtt_writel(rtc, MR, mr & ~rtc->imr);
}
#ifdef CONFIG_PM_SLEEP
/* AT91SAM9 RTC Power management control */
static int at91_rtc_suspend(struct device *dev)
{
struct sam9_rtc *rtc = dev_get_drvdata(dev);
u32 mr = rtt_readl(rtc, MR);
/*
* This IRQ is shared with DBGU and other hardware which isn't
* necessarily a wakeup event source.
*/
rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
if (rtc->imr) {
if (device_may_wakeup(dev) && (mr & AT91_RTT_ALMIEN)) {
unsigned long flags;
enable_irq_wake(rtc->irq);
spin_lock_irqsave(&rtc->lock, flags);
rtc->suspended = true;
spin_unlock_irqrestore(&rtc->lock, flags);
/* don't let RTTINC cause wakeups */
if (mr & AT91_RTT_RTTINCIEN)
rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN);
} else {
rtt_writel(rtc, MR, mr & ~rtc->imr);
}
}
return 0;
}
static int at91_rtc_resume(struct device *dev)
{
struct sam9_rtc *rtc = dev_get_drvdata(dev);
u32 mr;
if (rtc->imr) {
unsigned long flags;
if (device_may_wakeup(dev))
disable_irq_wake(rtc->irq);
mr = rtt_readl(rtc, MR);
rtt_writel(rtc, MR, mr | rtc->imr);
spin_lock_irqsave(&rtc->lock, flags);
rtc->suspended = false;
at91_rtc_cache_events(rtc);
at91_rtc_flush_events(rtc);
spin_unlock_irqrestore(&rtc->lock, flags);
}
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(at91_rtc_pm_ops, at91_rtc_suspend, at91_rtc_resume);
static const struct of_device_id at91_rtc_dt_ids[] = {
{ .compatible = "atmel,at91sam9260-rtt" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, at91_rtc_dt_ids);
static struct platform_driver at91_rtc_driver = {
.probe = at91_rtc_probe,
.remove = at91_rtc_remove,
.shutdown = at91_rtc_shutdown,
.driver = {
.name = "rtc-at91sam9",
.pm = &at91_rtc_pm_ops,
.of_match_table = of_match_ptr(at91_rtc_dt_ids),
},
};
module_platform_driver(at91_rtc_driver);
MODULE_AUTHOR("Michel Benoit");
MODULE_DESCRIPTION("RTC driver for Atmel AT91SAM9x");
MODULE_LICENSE("GPL");