| // SPDX-License-Identifier: GPL-2.0 |
| #include "radeonfb.h" |
| |
| #include <linux/slab.h> |
| |
| #include "../edid.h" |
| |
| static const struct fb_var_screeninfo radeonfb_default_var = { |
| .xres = 640, |
| .yres = 480, |
| .xres_virtual = 640, |
| .yres_virtual = 480, |
| .bits_per_pixel = 8, |
| .red = { .length = 8 }, |
| .green = { .length = 8 }, |
| .blue = { .length = 8 }, |
| .activate = FB_ACTIVATE_NOW, |
| .height = -1, |
| .width = -1, |
| .pixclock = 39721, |
| .left_margin = 40, |
| .right_margin = 24, |
| .upper_margin = 32, |
| .lower_margin = 11, |
| .hsync_len = 96, |
| .vsync_len = 2, |
| .vmode = FB_VMODE_NONINTERLACED |
| }; |
| |
| static char *radeon_get_mon_name(int type) |
| { |
| char *pret = NULL; |
| |
| switch (type) { |
| case MT_NONE: |
| pret = "no"; |
| break; |
| case MT_CRT: |
| pret = "CRT"; |
| break; |
| case MT_DFP: |
| pret = "DFP"; |
| break; |
| case MT_LCD: |
| pret = "LCD"; |
| break; |
| case MT_CTV: |
| pret = "CTV"; |
| break; |
| case MT_STV: |
| pret = "STV"; |
| break; |
| } |
| |
| return pret; |
| } |
| |
| |
| #if defined(CONFIG_PPC) || defined(CONFIG_SPARC) |
| /* |
| * Try to find monitor informations & EDID data out of the Open Firmware |
| * device-tree. This also contains some "hacks" to work around a few machine |
| * models with broken OF probing by hard-coding known EDIDs for some Mac |
| * laptops internal LVDS panel. (XXX: not done yet) |
| */ |
| static int radeon_parse_montype_prop(struct device_node *dp, u8 **out_EDID, |
| int hdno) |
| { |
| static char *propnames[] = { "DFP,EDID", "LCD,EDID", "EDID", |
| "EDID1", "EDID2", NULL }; |
| const u8 *pedid = NULL; |
| const u8 *pmt = NULL; |
| u8 *tmp; |
| int i, mt = MT_NONE; |
| |
| pr_debug("analyzing OF properties...\n"); |
| pmt = of_get_property(dp, "display-type", NULL); |
| if (!pmt) |
| return MT_NONE; |
| pr_debug("display-type: %s\n", pmt); |
| /* OF says "LCD" for DFP as well, we discriminate from the caller of this |
| * function |
| */ |
| if (!strcmp(pmt, "LCD") || !strcmp(pmt, "DFP")) |
| mt = MT_DFP; |
| else if (!strcmp(pmt, "CRT")) |
| mt = MT_CRT; |
| else { |
| if (strcmp(pmt, "NONE") != 0) |
| printk(KERN_WARNING "radeonfb: Unknown OF display-type: %s\n", |
| pmt); |
| return MT_NONE; |
| } |
| |
| for (i = 0; propnames[i] != NULL; ++i) { |
| pedid = of_get_property(dp, propnames[i], NULL); |
| if (pedid != NULL) |
| break; |
| } |
| /* We didn't find the EDID in the leaf node, some cards will actually |
| * put EDID1/EDID2 in the parent, look for these (typically M6 tipb). |
| * single-head cards have hdno == -1 and skip this step |
| */ |
| if (pedid == NULL && dp->parent && (hdno != -1)) |
| pedid = of_get_property(dp->parent, |
| (hdno == 0) ? "EDID1" : "EDID2", NULL); |
| if (pedid == NULL && dp->parent && (hdno == 0)) |
| pedid = of_get_property(dp->parent, "EDID", NULL); |
| if (pedid == NULL) |
| return mt; |
| |
| tmp = kmemdup(pedid, EDID_LENGTH, GFP_KERNEL); |
| if (!tmp) |
| return mt; |
| *out_EDID = tmp; |
| return mt; |
| } |
| |
| static int radeon_probe_OF_head(struct radeonfb_info *rinfo, int head_no, |
| u8 **out_EDID) |
| { |
| struct device_node *dp; |
| |
| pr_debug("radeon_probe_OF_head\n"); |
| |
| dp = rinfo->of_node; |
| while (dp == NULL) |
| return MT_NONE; |
| |
| if (rinfo->has_CRTC2) { |
| const char *pname; |
| int len, second = 0; |
| |
| dp = dp->child; |
| do { |
| if (!dp) |
| return MT_NONE; |
| pname = of_get_property(dp, "name", NULL); |
| if (!pname) |
| return MT_NONE; |
| len = strlen(pname); |
| pr_debug("head: %s (letter: %c, head_no: %d)\n", |
| pname, pname[len-1], head_no); |
| if (pname[len-1] == 'A' && head_no == 0) { |
| int mt = radeon_parse_montype_prop(dp, out_EDID, 0); |
| /* Maybe check for LVDS_GEN_CNTL here ? I need to check out |
| * what OF does when booting with lid closed |
| */ |
| if (mt == MT_DFP && rinfo->is_mobility) |
| mt = MT_LCD; |
| return mt; |
| } else if (pname[len-1] == 'B' && head_no == 1) |
| return radeon_parse_montype_prop(dp, out_EDID, 1); |
| second = 1; |
| dp = dp->sibling; |
| } while(!second); |
| } else { |
| if (head_no > 0) |
| return MT_NONE; |
| return radeon_parse_montype_prop(dp, out_EDID, -1); |
| } |
| return MT_NONE; |
| } |
| #endif /* CONFIG_PPC || CONFIG_SPARC */ |
| |
| |
| static int radeon_get_panel_info_BIOS(struct radeonfb_info *rinfo) |
| { |
| unsigned long tmp, tmp0; |
| char stmp[30]; |
| int i; |
| |
| if (!rinfo->bios_seg) |
| return 0; |
| |
| if (!(tmp = BIOS_IN16(rinfo->fp_bios_start + 0x40))) { |
| printk(KERN_ERR "radeonfb: Failed to detect DFP panel info using BIOS\n"); |
| rinfo->panel_info.pwr_delay = 200; |
| return 0; |
| } |
| |
| for(i=0; i<24; i++) |
| stmp[i] = BIOS_IN8(tmp+i+1); |
| stmp[24] = 0; |
| printk("radeonfb: panel ID string: %s\n", stmp); |
| rinfo->panel_info.xres = BIOS_IN16(tmp + 25); |
| rinfo->panel_info.yres = BIOS_IN16(tmp + 27); |
| printk("radeonfb: detected LVDS panel size from BIOS: %dx%d\n", |
| rinfo->panel_info.xres, rinfo->panel_info.yres); |
| |
| rinfo->panel_info.pwr_delay = BIOS_IN16(tmp + 44); |
| pr_debug("BIOS provided panel power delay: %d\n", rinfo->panel_info.pwr_delay); |
| if (rinfo->panel_info.pwr_delay > 2000 || rinfo->panel_info.pwr_delay <= 0) |
| rinfo->panel_info.pwr_delay = 2000; |
| |
| /* |
| * Some panels only work properly with some divider combinations |
| */ |
| rinfo->panel_info.ref_divider = BIOS_IN16(tmp + 46); |
| rinfo->panel_info.post_divider = BIOS_IN8(tmp + 48); |
| rinfo->panel_info.fbk_divider = BIOS_IN16(tmp + 49); |
| if (rinfo->panel_info.ref_divider != 0 && |
| rinfo->panel_info.fbk_divider > 3) { |
| rinfo->panel_info.use_bios_dividers = 1; |
| printk(KERN_INFO "radeondb: BIOS provided dividers will be used\n"); |
| pr_debug("ref_divider = %x\n", rinfo->panel_info.ref_divider); |
| pr_debug("post_divider = %x\n", rinfo->panel_info.post_divider); |
| pr_debug("fbk_divider = %x\n", rinfo->panel_info.fbk_divider); |
| } |
| pr_debug("Scanning BIOS table ...\n"); |
| for(i=0; i<32; i++) { |
| tmp0 = BIOS_IN16(tmp+64+i*2); |
| if (tmp0 == 0) |
| break; |
| pr_debug(" %d x %d\n", BIOS_IN16(tmp0), BIOS_IN16(tmp0+2)); |
| if ((BIOS_IN16(tmp0) == rinfo->panel_info.xres) && |
| (BIOS_IN16(tmp0+2) == rinfo->panel_info.yres)) { |
| rinfo->panel_info.hblank = (BIOS_IN16(tmp0+17) - BIOS_IN16(tmp0+19)) * 8; |
| rinfo->panel_info.hOver_plus = ((BIOS_IN16(tmp0+21) - |
| BIOS_IN16(tmp0+19) -1) * 8) & 0x7fff; |
| rinfo->panel_info.hSync_width = BIOS_IN8(tmp0+23) * 8; |
| rinfo->panel_info.vblank = BIOS_IN16(tmp0+24) - BIOS_IN16(tmp0+26); |
| rinfo->panel_info.vOver_plus = (BIOS_IN16(tmp0+28) & 0x7ff) - BIOS_IN16(tmp0+26); |
| rinfo->panel_info.vSync_width = (BIOS_IN16(tmp0+28) & 0xf800) >> 11; |
| rinfo->panel_info.clock = BIOS_IN16(tmp0+9); |
| /* Assume high active syncs for now until ATI tells me more... maybe we |
| * can probe register values here ? |
| */ |
| rinfo->panel_info.hAct_high = 1; |
| rinfo->panel_info.vAct_high = 1; |
| /* Mark panel infos valid */ |
| rinfo->panel_info.valid = 1; |
| |
| pr_debug("Found panel in BIOS table:\n"); |
| pr_debug(" hblank: %d\n", rinfo->panel_info.hblank); |
| pr_debug(" hOver_plus: %d\n", rinfo->panel_info.hOver_plus); |
| pr_debug(" hSync_width: %d\n", rinfo->panel_info.hSync_width); |
| pr_debug(" vblank: %d\n", rinfo->panel_info.vblank); |
| pr_debug(" vOver_plus: %d\n", rinfo->panel_info.vOver_plus); |
| pr_debug(" vSync_width: %d\n", rinfo->panel_info.vSync_width); |
| pr_debug(" clock: %d\n", rinfo->panel_info.clock); |
| |
| return 1; |
| } |
| } |
| pr_debug("Didn't find panel in BIOS table !\n"); |
| |
| return 0; |
| } |
| |
| /* Try to extract the connector informations from the BIOS. This |
| * doesn't quite work yet, but it's output is still useful for |
| * debugging |
| */ |
| static void radeon_parse_connector_info(struct radeonfb_info *rinfo) |
| { |
| int offset, chips, connectors, tmp, i, conn, type; |
| |
| static char* __conn_type_table[16] = { |
| "NONE", "Proprietary", "CRT", "DVI-I", "DVI-D", "Unknown", "Unknown", |
| "Unknown", "Unknown", "Unknown", "Unknown", "Unknown", "Unknown", |
| "Unknown", "Unknown", "Unknown" |
| }; |
| |
| if (!rinfo->bios_seg) |
| return; |
| |
| offset = BIOS_IN16(rinfo->fp_bios_start + 0x50); |
| if (offset == 0) { |
| printk(KERN_WARNING "radeonfb: No connector info table detected\n"); |
| return; |
| } |
| |
| /* Don't do much more at this point but displaying the data if |
| * DEBUG is enabled |
| */ |
| chips = BIOS_IN8(offset++) >> 4; |
| pr_debug("%d chips in connector info\n", chips); |
| for (i = 0; i < chips; i++) { |
| tmp = BIOS_IN8(offset++); |
| connectors = tmp & 0x0f; |
| pr_debug(" - chip %d has %d connectors\n", tmp >> 4, connectors); |
| for (conn = 0; ; conn++) { |
| tmp = BIOS_IN16(offset); |
| if (tmp == 0) |
| break; |
| offset += 2; |
| type = (tmp >> 12) & 0x0f; |
| pr_debug(" * connector %d of type %d (%s) : %04x\n", |
| conn, type, __conn_type_table[type], tmp); |
| } |
| } |
| } |
| |
| |
| /* |
| * Probe physical connection of a CRT. This code comes from XFree |
| * as well and currently is only implemented for the CRT DAC, the |
| * code for the TVDAC is commented out in XFree as "non working" |
| */ |
| static int radeon_crt_is_connected(struct radeonfb_info *rinfo, int is_crt_dac) |
| { |
| int connected = 0; |
| |
| /* the monitor either wasn't connected or it is a non-DDC CRT. |
| * try to probe it |
| */ |
| if (is_crt_dac) { |
| unsigned long ulOrigVCLK_ECP_CNTL; |
| unsigned long ulOrigDAC_CNTL; |
| unsigned long ulOrigDAC_EXT_CNTL; |
| unsigned long ulOrigCRTC_EXT_CNTL; |
| unsigned long ulData; |
| unsigned long ulMask; |
| |
| ulOrigVCLK_ECP_CNTL = INPLL(VCLK_ECP_CNTL); |
| |
| ulData = ulOrigVCLK_ECP_CNTL; |
| ulData &= ~(PIXCLK_ALWAYS_ONb |
| | PIXCLK_DAC_ALWAYS_ONb); |
| ulMask = ~(PIXCLK_ALWAYS_ONb |
| | PIXCLK_DAC_ALWAYS_ONb); |
| OUTPLLP(VCLK_ECP_CNTL, ulData, ulMask); |
| |
| ulOrigCRTC_EXT_CNTL = INREG(CRTC_EXT_CNTL); |
| ulData = ulOrigCRTC_EXT_CNTL; |
| ulData |= CRTC_CRT_ON; |
| OUTREG(CRTC_EXT_CNTL, ulData); |
| |
| ulOrigDAC_EXT_CNTL = INREG(DAC_EXT_CNTL); |
| ulData = ulOrigDAC_EXT_CNTL; |
| ulData &= ~DAC_FORCE_DATA_MASK; |
| ulData |= (DAC_FORCE_BLANK_OFF_EN |
| |DAC_FORCE_DATA_EN |
| |DAC_FORCE_DATA_SEL_MASK); |
| if ((rinfo->family == CHIP_FAMILY_RV250) || |
| (rinfo->family == CHIP_FAMILY_RV280)) |
| ulData |= (0x01b6 << DAC_FORCE_DATA_SHIFT); |
| else |
| ulData |= (0x01ac << DAC_FORCE_DATA_SHIFT); |
| |
| OUTREG(DAC_EXT_CNTL, ulData); |
| |
| ulOrigDAC_CNTL = INREG(DAC_CNTL); |
| ulData = ulOrigDAC_CNTL; |
| ulData |= DAC_CMP_EN; |
| ulData &= ~(DAC_RANGE_CNTL_MASK |
| | DAC_PDWN); |
| ulData |= 0x2; |
| OUTREG(DAC_CNTL, ulData); |
| |
| mdelay(1); |
| |
| ulData = INREG(DAC_CNTL); |
| connected = (DAC_CMP_OUTPUT & ulData) ? 1 : 0; |
| |
| ulData = ulOrigVCLK_ECP_CNTL; |
| ulMask = 0xFFFFFFFFL; |
| OUTPLLP(VCLK_ECP_CNTL, ulData, ulMask); |
| |
| OUTREG(DAC_CNTL, ulOrigDAC_CNTL ); |
| OUTREG(DAC_EXT_CNTL, ulOrigDAC_EXT_CNTL ); |
| OUTREG(CRTC_EXT_CNTL, ulOrigCRTC_EXT_CNTL); |
| } |
| |
| return connected ? MT_CRT : MT_NONE; |
| } |
| |
| /* |
| * Parse the "monitor_layout" string if any. This code is mostly |
| * copied from XFree's radeon driver |
| */ |
| static int radeon_parse_monitor_layout(struct radeonfb_info *rinfo, |
| const char *monitor_layout) |
| { |
| char s1[5], s2[5]; |
| int i = 0, second = 0; |
| const char *s; |
| |
| if (!monitor_layout) |
| return 0; |
| |
| s = monitor_layout; |
| do { |
| switch(*s) { |
| case ',': |
| s1[i] = '\0'; |
| i = 0; |
| second = 1; |
| break; |
| case ' ': |
| case '\0': |
| break; |
| default: |
| if (i > 4) |
| break; |
| if (second) |
| s2[i] = *s; |
| else |
| s1[i] = *s; |
| i++; |
| } |
| |
| if (i > 4) |
| i = 4; |
| |
| } while (*s++); |
| if (second) |
| s2[i] = 0; |
| else { |
| s1[i] = 0; |
| s2[0] = 0; |
| } |
| if (strcmp(s1, "CRT") == 0) |
| rinfo->mon1_type = MT_CRT; |
| else if (strcmp(s1, "TMDS") == 0) |
| rinfo->mon1_type = MT_DFP; |
| else if (strcmp(s1, "LVDS") == 0) |
| rinfo->mon1_type = MT_LCD; |
| |
| if (strcmp(s2, "CRT") == 0) |
| rinfo->mon2_type = MT_CRT; |
| else if (strcmp(s2, "TMDS") == 0) |
| rinfo->mon2_type = MT_DFP; |
| else if (strcmp(s2, "LVDS") == 0) |
| rinfo->mon2_type = MT_LCD; |
| |
| return 1; |
| } |
| |
| /* |
| * Probe display on both primary and secondary card's connector (if any) |
| * by various available techniques (i2c, OF device tree, BIOS, ...) and |
| * try to retrieve EDID. The algorithm here comes from XFree's radeon |
| * driver |
| */ |
| void radeon_probe_screens(struct radeonfb_info *rinfo, |
| const char *monitor_layout, int ignore_edid) |
| { |
| #ifdef CONFIG_FB_RADEON_I2C |
| int ddc_crt2_used = 0; |
| #endif |
| int tmp, i; |
| |
| radeon_parse_connector_info(rinfo); |
| |
| if (radeon_parse_monitor_layout(rinfo, monitor_layout)) { |
| |
| /* |
| * If user specified a monitor_layout option, use it instead |
| * of auto-detecting. Maybe we should only use this argument |
| * on the first radeon card probed or provide a way to specify |
| * a layout for each card ? |
| */ |
| |
| pr_debug("Using specified monitor layout: %s", monitor_layout); |
| #ifdef CONFIG_FB_RADEON_I2C |
| if (!ignore_edid) { |
| if (rinfo->mon1_type != MT_NONE) |
| if (!radeon_probe_i2c_connector(rinfo, ddc_dvi, &rinfo->mon1_EDID)) { |
| radeon_probe_i2c_connector(rinfo, ddc_crt2, &rinfo->mon1_EDID); |
| ddc_crt2_used = 1; |
| } |
| if (rinfo->mon2_type != MT_NONE) |
| if (!radeon_probe_i2c_connector(rinfo, ddc_vga, &rinfo->mon2_EDID) && |
| !ddc_crt2_used) |
| radeon_probe_i2c_connector(rinfo, ddc_crt2, &rinfo->mon2_EDID); |
| } |
| #endif /* CONFIG_FB_RADEON_I2C */ |
| if (rinfo->mon1_type == MT_NONE) { |
| if (rinfo->mon2_type != MT_NONE) { |
| rinfo->mon1_type = rinfo->mon2_type; |
| rinfo->mon1_EDID = rinfo->mon2_EDID; |
| } else { |
| rinfo->mon1_type = MT_CRT; |
| printk(KERN_INFO "radeonfb: No valid monitor, assuming CRT on first port\n"); |
| } |
| rinfo->mon2_type = MT_NONE; |
| rinfo->mon2_EDID = NULL; |
| } |
| } else { |
| /* |
| * Auto-detecting display type (well... trying to ...) |
| */ |
| |
| pr_debug("Starting monitor auto detection...\n"); |
| |
| #if defined(DEBUG) && defined(CONFIG_FB_RADEON_I2C) |
| { |
| u8 *EDIDs[4] = { NULL, NULL, NULL, NULL }; |
| int mon_types[4] = {MT_NONE, MT_NONE, MT_NONE, MT_NONE}; |
| int i; |
| |
| for (i = 0; i < 4; i++) |
| mon_types[i] = radeon_probe_i2c_connector(rinfo, |
| i+1, &EDIDs[i]); |
| } |
| #endif /* DEBUG */ |
| /* |
| * Old single head cards |
| */ |
| if (!rinfo->has_CRTC2) { |
| #if defined(CONFIG_PPC) || defined(CONFIG_SPARC) |
| if (rinfo->mon1_type == MT_NONE) |
| rinfo->mon1_type = radeon_probe_OF_head(rinfo, 0, |
| &rinfo->mon1_EDID); |
| #endif /* CONFIG_PPC || CONFIG_SPARC */ |
| #ifdef CONFIG_FB_RADEON_I2C |
| if (rinfo->mon1_type == MT_NONE) |
| rinfo->mon1_type = |
| radeon_probe_i2c_connector(rinfo, ddc_dvi, |
| &rinfo->mon1_EDID); |
| if (rinfo->mon1_type == MT_NONE) |
| rinfo->mon1_type = |
| radeon_probe_i2c_connector(rinfo, ddc_vga, |
| &rinfo->mon1_EDID); |
| if (rinfo->mon1_type == MT_NONE) |
| rinfo->mon1_type = |
| radeon_probe_i2c_connector(rinfo, ddc_crt2, |
| &rinfo->mon1_EDID); |
| #endif /* CONFIG_FB_RADEON_I2C */ |
| if (rinfo->mon1_type == MT_NONE) |
| rinfo->mon1_type = MT_CRT; |
| goto bail; |
| } |
| |
| /* |
| * Check for cards with reversed DACs or TMDS controllers using BIOS |
| */ |
| if (rinfo->bios_seg && |
| (tmp = BIOS_IN16(rinfo->fp_bios_start + 0x50))) { |
| for (i = 1; i < 4; i++) { |
| unsigned int tmp0; |
| |
| if (!BIOS_IN8(tmp + i*2) && i > 1) |
| break; |
| tmp0 = BIOS_IN16(tmp + i*2); |
| if ((!(tmp0 & 0x01)) && (((tmp0 >> 8) & 0x0f) == ddc_dvi)) { |
| rinfo->reversed_DAC = 1; |
| printk(KERN_INFO "radeonfb: Reversed DACs detected\n"); |
| } |
| if ((((tmp0 >> 8) & 0x0f) == ddc_dvi) && ((tmp0 >> 4) & 0x01)) { |
| rinfo->reversed_TMDS = 1; |
| printk(KERN_INFO "radeonfb: Reversed TMDS detected\n"); |
| } |
| } |
| } |
| |
| /* |
| * Probe primary head (DVI or laptop internal panel) |
| */ |
| #if defined(CONFIG_PPC) || defined(CONFIG_SPARC) |
| if (rinfo->mon1_type == MT_NONE) |
| rinfo->mon1_type = radeon_probe_OF_head(rinfo, 0, |
| &rinfo->mon1_EDID); |
| #endif /* CONFIG_PPC || CONFIG_SPARC */ |
| #ifdef CONFIG_FB_RADEON_I2C |
| if (rinfo->mon1_type == MT_NONE) |
| rinfo->mon1_type = radeon_probe_i2c_connector(rinfo, ddc_dvi, |
| &rinfo->mon1_EDID); |
| if (rinfo->mon1_type == MT_NONE) { |
| rinfo->mon1_type = radeon_probe_i2c_connector(rinfo, ddc_crt2, |
| &rinfo->mon1_EDID); |
| if (rinfo->mon1_type != MT_NONE) |
| ddc_crt2_used = 1; |
| } |
| #endif /* CONFIG_FB_RADEON_I2C */ |
| if (rinfo->mon1_type == MT_NONE && rinfo->is_mobility && |
| ((rinfo->bios_seg && (INREG(BIOS_4_SCRATCH) & 4)) |
| || (INREG(LVDS_GEN_CNTL) & LVDS_ON))) { |
| rinfo->mon1_type = MT_LCD; |
| printk("Non-DDC laptop panel detected\n"); |
| } |
| if (rinfo->mon1_type == MT_NONE) |
| rinfo->mon1_type = radeon_crt_is_connected(rinfo, rinfo->reversed_DAC); |
| |
| /* |
| * Probe secondary head (mostly VGA, can be DVI) |
| */ |
| #if defined(CONFIG_PPC) || defined(CONFIG_SPARC) |
| if (rinfo->mon2_type == MT_NONE) |
| rinfo->mon2_type = radeon_probe_OF_head(rinfo, 1, |
| &rinfo->mon2_EDID); |
| #endif /* CONFIG_PPC || defined(CONFIG_SPARC) */ |
| #ifdef CONFIG_FB_RADEON_I2C |
| if (rinfo->mon2_type == MT_NONE) |
| rinfo->mon2_type = radeon_probe_i2c_connector(rinfo, ddc_vga, |
| &rinfo->mon2_EDID); |
| if (rinfo->mon2_type == MT_NONE && !ddc_crt2_used) |
| rinfo->mon2_type = radeon_probe_i2c_connector(rinfo, ddc_crt2, |
| &rinfo->mon2_EDID); |
| #endif /* CONFIG_FB_RADEON_I2C */ |
| if (rinfo->mon2_type == MT_NONE) |
| rinfo->mon2_type = radeon_crt_is_connected(rinfo, !rinfo->reversed_DAC); |
| |
| /* |
| * If we only detected port 2, we swap them, if none detected, |
| * assume CRT (maybe fallback to old BIOS_SCRATCH stuff ? or look |
| * at FP registers ?) |
| */ |
| if (rinfo->mon1_type == MT_NONE) { |
| if (rinfo->mon2_type != MT_NONE) { |
| rinfo->mon1_type = rinfo->mon2_type; |
| rinfo->mon1_EDID = rinfo->mon2_EDID; |
| } else |
| rinfo->mon1_type = MT_CRT; |
| rinfo->mon2_type = MT_NONE; |
| rinfo->mon2_EDID = NULL; |
| } |
| |
| /* |
| * Deal with reversed TMDS |
| */ |
| if (rinfo->reversed_TMDS) { |
| /* Always keep internal TMDS as primary head */ |
| if (rinfo->mon1_type == MT_DFP || rinfo->mon2_type == MT_DFP) { |
| int tmp_type = rinfo->mon1_type; |
| u8 *tmp_EDID = rinfo->mon1_EDID; |
| rinfo->mon1_type = rinfo->mon2_type; |
| rinfo->mon1_EDID = rinfo->mon2_EDID; |
| rinfo->mon2_type = tmp_type; |
| rinfo->mon2_EDID = tmp_EDID; |
| if (rinfo->mon1_type == MT_CRT || rinfo->mon2_type == MT_CRT) |
| rinfo->reversed_DAC ^= 1; |
| } |
| } |
| } |
| if (ignore_edid) { |
| kfree(rinfo->mon1_EDID); |
| rinfo->mon1_EDID = NULL; |
| kfree(rinfo->mon2_EDID); |
| rinfo->mon2_EDID = NULL; |
| } |
| |
| bail: |
| printk(KERN_INFO "radeonfb: Monitor 1 type %s found\n", |
| radeon_get_mon_name(rinfo->mon1_type)); |
| if (rinfo->mon1_EDID) |
| printk(KERN_INFO "radeonfb: EDID probed\n"); |
| if (!rinfo->has_CRTC2) |
| return; |
| printk(KERN_INFO "radeonfb: Monitor 2 type %s found\n", |
| radeon_get_mon_name(rinfo->mon2_type)); |
| if (rinfo->mon2_EDID) |
| printk(KERN_INFO "radeonfb: EDID probed\n"); |
| } |
| |
| |
| /* |
| * This function applies any arch/model/machine specific fixups |
| * to the panel info. It may eventually alter EDID block as |
| * well or whatever is specific to a given model and not probed |
| * properly by the default code |
| */ |
| static void radeon_fixup_panel_info(struct radeonfb_info *rinfo) |
| { |
| #ifdef CONFIG_PPC |
| /* |
| * LCD Flat panels should use fixed dividers, we enfore that on |
| * PPC only for now... |
| */ |
| if (!rinfo->panel_info.use_bios_dividers && rinfo->mon1_type == MT_LCD |
| && rinfo->is_mobility) { |
| int ppll_div_sel; |
| u32 ppll_divn; |
| ppll_div_sel = INREG8(CLOCK_CNTL_INDEX + 1) & 0x3; |
| radeon_pll_errata_after_index(rinfo); |
| ppll_divn = INPLL(PPLL_DIV_0 + ppll_div_sel); |
| rinfo->panel_info.ref_divider = rinfo->pll.ref_div; |
| rinfo->panel_info.fbk_divider = ppll_divn & 0x7ff; |
| rinfo->panel_info.post_divider = (ppll_divn >> 16) & 0x7; |
| rinfo->panel_info.use_bios_dividers = 1; |
| |
| printk(KERN_DEBUG "radeonfb: Using Firmware dividers 0x%08x " |
| "from PPLL %d\n", |
| rinfo->panel_info.fbk_divider | |
| (rinfo->panel_info.post_divider << 16), |
| ppll_div_sel); |
| } |
| #endif /* CONFIG_PPC */ |
| } |
| |
| |
| /* |
| * Fill up panel infos from a mode definition, either returned by the EDID |
| * or from the default mode when we can't do any better |
| */ |
| static void radeon_var_to_panel_info(struct radeonfb_info *rinfo, struct fb_var_screeninfo *var) |
| { |
| rinfo->panel_info.xres = var->xres; |
| rinfo->panel_info.yres = var->yres; |
| rinfo->panel_info.clock = 100000000 / var->pixclock; |
| rinfo->panel_info.hOver_plus = var->right_margin; |
| rinfo->panel_info.hSync_width = var->hsync_len; |
| rinfo->panel_info.hblank = var->left_margin + |
| (var->right_margin + var->hsync_len); |
| rinfo->panel_info.vOver_plus = var->lower_margin; |
| rinfo->panel_info.vSync_width = var->vsync_len; |
| rinfo->panel_info.vblank = var->upper_margin + |
| (var->lower_margin + var->vsync_len); |
| rinfo->panel_info.hAct_high = |
| (var->sync & FB_SYNC_HOR_HIGH_ACT) != 0; |
| rinfo->panel_info.vAct_high = |
| (var->sync & FB_SYNC_VERT_HIGH_ACT) != 0; |
| rinfo->panel_info.valid = 1; |
| /* We use a default of 200ms for the panel power delay, |
| * I need to have a real schedule() instead of mdelay's in the panel code. |
| * we might be possible to figure out a better power delay either from |
| * MacOS OF tree or from the EDID block (proprietary extensions ?) |
| */ |
| rinfo->panel_info.pwr_delay = 200; |
| } |
| |
| static void radeon_videomode_to_var(struct fb_var_screeninfo *var, |
| const struct fb_videomode *mode) |
| { |
| var->xres = mode->xres; |
| var->yres = mode->yres; |
| var->xres_virtual = mode->xres; |
| var->yres_virtual = mode->yres; |
| var->xoffset = 0; |
| var->yoffset = 0; |
| var->pixclock = mode->pixclock; |
| var->left_margin = mode->left_margin; |
| var->right_margin = mode->right_margin; |
| var->upper_margin = mode->upper_margin; |
| var->lower_margin = mode->lower_margin; |
| var->hsync_len = mode->hsync_len; |
| var->vsync_len = mode->vsync_len; |
| var->sync = mode->sync; |
| var->vmode = mode->vmode; |
| } |
| |
| #ifdef CONFIG_PPC_PSERIES |
| static int is_powerblade(const char *model) |
| { |
| struct device_node *root; |
| const char* cp; |
| int len, l, rc = 0; |
| |
| root = of_find_node_by_path("/"); |
| if (root && model) { |
| l = strlen(model); |
| cp = of_get_property(root, "model", &len); |
| if (cp) |
| rc = memcmp(model, cp, min(len, l)) == 0; |
| of_node_put(root); |
| } |
| return rc; |
| } |
| #endif |
| |
| /* |
| * Build the modedb for head 1 (head 2 will come later), check panel infos |
| * from either BIOS or EDID, and pick up the default mode |
| */ |
| void radeon_check_modes(struct radeonfb_info *rinfo, const char *mode_option) |
| { |
| struct fb_info * info = rinfo->info; |
| int has_default_mode = 0; |
| |
| /* |
| * Fill default var first |
| */ |
| info->var = radeonfb_default_var; |
| INIT_LIST_HEAD(&info->modelist); |
| |
| /* |
| * First check out what BIOS has to say |
| */ |
| if (rinfo->mon1_type == MT_LCD) |
| radeon_get_panel_info_BIOS(rinfo); |
| |
| /* |
| * Parse EDID detailed timings and deduce panel infos if any. Right now |
| * we only deal with first entry returned by parse_EDID, we may do better |
| * some day... |
| */ |
| if (!rinfo->panel_info.use_bios_dividers && rinfo->mon1_type != MT_CRT |
| && rinfo->mon1_EDID) { |
| struct fb_var_screeninfo var; |
| pr_debug("Parsing EDID data for panel info\n"); |
| if (fb_parse_edid(rinfo->mon1_EDID, &var) == 0) { |
| if (var.xres >= rinfo->panel_info.xres && |
| var.yres >= rinfo->panel_info.yres) |
| radeon_var_to_panel_info(rinfo, &var); |
| } |
| } |
| |
| /* |
| * Do any additional platform/arch fixups to the panel infos |
| */ |
| radeon_fixup_panel_info(rinfo); |
| |
| /* |
| * If we have some valid panel infos, we setup the default mode based on |
| * those |
| */ |
| if (rinfo->mon1_type != MT_CRT && rinfo->panel_info.valid) { |
| struct fb_var_screeninfo *var = &info->var; |
| |
| pr_debug("Setting up default mode based on panel info\n"); |
| var->xres = rinfo->panel_info.xres; |
| var->yres = rinfo->panel_info.yres; |
| var->xres_virtual = rinfo->panel_info.xres; |
| var->yres_virtual = rinfo->panel_info.yres; |
| var->xoffset = var->yoffset = 0; |
| var->bits_per_pixel = 8; |
| var->pixclock = 100000000 / rinfo->panel_info.clock; |
| var->left_margin = (rinfo->panel_info.hblank - rinfo->panel_info.hOver_plus |
| - rinfo->panel_info.hSync_width); |
| var->right_margin = rinfo->panel_info.hOver_plus; |
| var->upper_margin = (rinfo->panel_info.vblank - rinfo->panel_info.vOver_plus |
| - rinfo->panel_info.vSync_width); |
| var->lower_margin = rinfo->panel_info.vOver_plus; |
| var->hsync_len = rinfo->panel_info.hSync_width; |
| var->vsync_len = rinfo->panel_info.vSync_width; |
| var->sync = 0; |
| if (rinfo->panel_info.hAct_high) |
| var->sync |= FB_SYNC_HOR_HIGH_ACT; |
| if (rinfo->panel_info.vAct_high) |
| var->sync |= FB_SYNC_VERT_HIGH_ACT; |
| var->vmode = 0; |
| has_default_mode = 1; |
| } |
| |
| /* |
| * Now build modedb from EDID |
| */ |
| if (rinfo->mon1_EDID) { |
| fb_edid_to_monspecs(rinfo->mon1_EDID, &info->monspecs); |
| fb_videomode_to_modelist(info->monspecs.modedb, |
| info->monspecs.modedb_len, |
| &info->modelist); |
| rinfo->mon1_modedb = info->monspecs.modedb; |
| rinfo->mon1_dbsize = info->monspecs.modedb_len; |
| } |
| |
| |
| /* |
| * Finally, if we don't have panel infos we need to figure some (or |
| * we try to read it from card), we try to pick a default mode |
| * and create some panel infos. Whatever... |
| */ |
| if (rinfo->mon1_type != MT_CRT && !rinfo->panel_info.valid) { |
| struct fb_videomode *modedb; |
| int dbsize; |
| char modename[32]; |
| |
| pr_debug("Guessing panel info...\n"); |
| if (rinfo->panel_info.xres == 0 || rinfo->panel_info.yres == 0) { |
| u32 tmp = INREG(FP_HORZ_STRETCH) & HORZ_PANEL_SIZE; |
| rinfo->panel_info.xres = ((tmp >> HORZ_PANEL_SHIFT) + 1) * 8; |
| tmp = INREG(FP_VERT_STRETCH) & VERT_PANEL_SIZE; |
| rinfo->panel_info.yres = (tmp >> VERT_PANEL_SHIFT) + 1; |
| } |
| if (rinfo->panel_info.xres == 0 || rinfo->panel_info.yres == 0) { |
| printk(KERN_WARNING "radeonfb: Can't find panel size, going back to CRT\n"); |
| rinfo->mon1_type = MT_CRT; |
| goto pickup_default; |
| } |
| printk(KERN_WARNING "radeonfb: Assuming panel size %dx%d\n", |
| rinfo->panel_info.xres, rinfo->panel_info.yres); |
| modedb = rinfo->mon1_modedb; |
| dbsize = rinfo->mon1_dbsize; |
| snprintf(modename, 31, "%dx%d", rinfo->panel_info.xres, rinfo->panel_info.yres); |
| if (fb_find_mode(&info->var, info, modename, |
| modedb, dbsize, NULL, 8) == 0) { |
| printk(KERN_WARNING "radeonfb: Can't find mode for panel size, going back to CRT\n"); |
| rinfo->mon1_type = MT_CRT; |
| goto pickup_default; |
| } |
| has_default_mode = 1; |
| radeon_var_to_panel_info(rinfo, &info->var); |
| } |
| |
| pickup_default: |
| /* |
| * Apply passed-in mode option if any |
| */ |
| if (mode_option) { |
| if (fb_find_mode(&info->var, info, mode_option, |
| info->monspecs.modedb, |
| info->monspecs.modedb_len, NULL, 8) != 0) |
| has_default_mode = 1; |
| } |
| |
| #ifdef CONFIG_PPC_PSERIES |
| if (!has_default_mode && ( |
| is_powerblade("IBM,8842") || /* JS20 */ |
| is_powerblade("IBM,8844") || /* JS21 */ |
| is_powerblade("IBM,7998") || /* JS12/JS21/JS22 */ |
| is_powerblade("IBM,0792") || /* QS21 */ |
| is_powerblade("IBM,0793") /* QS22 */ |
| )) { |
| printk("Falling back to 800x600 on JSxx hardware\n"); |
| if (fb_find_mode(&info->var, info, "800x600@60", |
| info->monspecs.modedb, |
| info->monspecs.modedb_len, NULL, 8) != 0) |
| has_default_mode = 1; |
| } |
| #endif |
| |
| /* |
| * Still no mode, let's pick up a default from the db |
| */ |
| if (!has_default_mode && info->monspecs.modedb != NULL) { |
| struct fb_monspecs *specs = &info->monspecs; |
| struct fb_videomode *modedb = NULL; |
| |
| /* get preferred timing */ |
| if (specs->misc & FB_MISC_1ST_DETAIL) { |
| int i; |
| |
| for (i = 0; i < specs->modedb_len; i++) { |
| if (specs->modedb[i].flag & FB_MODE_IS_FIRST) { |
| modedb = &specs->modedb[i]; |
| break; |
| } |
| } |
| } else { |
| /* otherwise, get first mode in database */ |
| modedb = &specs->modedb[0]; |
| } |
| if (modedb != NULL) { |
| info->var.bits_per_pixel = 8; |
| radeon_videomode_to_var(&info->var, modedb); |
| has_default_mode = 1; |
| } |
| } |
| if (1) { |
| struct fb_videomode mode; |
| /* Make sure that whatever mode got selected is actually in the |
| * modelist or the kernel may die |
| */ |
| fb_var_to_videomode(&mode, &info->var); |
| fb_add_videomode(&mode, &info->modelist); |
| } |
| } |
| |
| /* |
| * The code below is used to pick up a mode in check_var and |
| * set_var. It should be made generic |
| */ |
| |
| /* |
| * This is used when looking for modes. We assign a "distance" value |
| * to a mode in the modedb depending how "close" it is from what we |
| * are looking for. |
| * Currently, we don't compare that much, we could do better but |
| * the current fbcon doesn't quite mind ;) |
| */ |
| static int radeon_compare_modes(const struct fb_var_screeninfo *var, |
| const struct fb_videomode *mode) |
| { |
| int distance = 0; |
| |
| distance = mode->yres - var->yres; |
| distance += (mode->xres - var->xres)/2; |
| return distance; |
| } |
| |
| /* |
| * This function is called by check_var, it gets the passed in mode parameter, and |
| * outputs a valid mode matching the passed-in one as closely as possible. |
| * We need something better ultimately. Things like fbcon basically pass us out |
| * current mode with xres/yres hacked, while things like XFree will actually |
| * produce a full timing that we should respect as much as possible. |
| * |
| * This is why I added the FB_ACTIVATE_FIND that is used by fbcon. Without this, |
| * we do a simple spec match, that's all. With it, we actually look for a mode in |
| * either our monitor modedb or the vesa one if none |
| * |
| */ |
| int radeon_match_mode(struct radeonfb_info *rinfo, |
| struct fb_var_screeninfo *dest, |
| const struct fb_var_screeninfo *src) |
| { |
| const struct fb_videomode *db = vesa_modes; |
| int i, dbsize = 34; |
| int has_rmx, native_db = 0; |
| int distance = INT_MAX; |
| const struct fb_videomode *candidate = NULL; |
| |
| /* Start with a copy of the requested mode */ |
| memcpy(dest, src, sizeof(struct fb_var_screeninfo)); |
| |
| /* Check if we have a modedb built from EDID */ |
| if (rinfo->mon1_modedb) { |
| db = rinfo->mon1_modedb; |
| dbsize = rinfo->mon1_dbsize; |
| native_db = 1; |
| } |
| |
| /* Check if we have a scaler allowing any fancy mode */ |
| has_rmx = rinfo->mon1_type == MT_LCD || rinfo->mon1_type == MT_DFP; |
| |
| /* If we have a scaler and are passed FB_ACTIVATE_TEST or |
| * FB_ACTIVATE_NOW, just do basic checking and return if the |
| * mode match |
| */ |
| if ((src->activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_TEST || |
| (src->activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW) { |
| /* We don't have an RMX, validate timings. If we don't have |
| * monspecs, we should be paranoid and not let use go above |
| * 640x480-60, but I assume userland knows what it's doing here |
| * (though I may be proven wrong...) |
| */ |
| if (has_rmx == 0 && rinfo->mon1_modedb) |
| if (fb_validate_mode((struct fb_var_screeninfo *)src, rinfo->info)) |
| return -EINVAL; |
| return 0; |
| } |
| |
| /* Now look for a mode in the database */ |
| while (db) { |
| for (i = 0; i < dbsize; i++) { |
| int d; |
| |
| if (db[i].yres < src->yres) |
| continue; |
| if (db[i].xres < src->xres) |
| continue; |
| d = radeon_compare_modes(src, &db[i]); |
| /* If the new mode is at least as good as the previous one, |
| * then it's our new candidate |
| */ |
| if (d < distance) { |
| candidate = &db[i]; |
| distance = d; |
| } |
| } |
| db = NULL; |
| /* If we have a scaler, we allow any mode from the database */ |
| if (native_db && has_rmx) { |
| db = vesa_modes; |
| dbsize = 34; |
| native_db = 0; |
| } |
| } |
| |
| /* If we have found a match, return it */ |
| if (candidate != NULL) { |
| radeon_videomode_to_var(dest, candidate); |
| return 0; |
| } |
| |
| /* If we haven't and don't have a scaler, fail */ |
| if (!has_rmx) |
| return -EINVAL; |
| |
| return 0; |
| } |
