/***************************************************************************
 *   Copyright (C) 2010-2012 by Bruno Prémont <bonbons@linux-vserver.org>  *
 *                                                                         *
 *   Based on Logitech G13 driver (v0.4)                                   *
 *     Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu>   *
 *                                                                         *
 *   This program is free software: you can redistribute it and/or modify  *
 *   it under the terms of the GNU General Public License as published by  *
 *   the Free Software Foundation, version 2 of the License.               *
 *                                                                         *
 *   This driver is distributed in the hope that it will be useful, but    *
 *   WITHOUT ANY WARRANTY; without even the implied warranty of            *
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU      *
 *   General Public License for more details.                              *
 *                                                                         *
 *   You should have received a copy of the GNU General Public License     *
 *   along with this software. If not see <http://www.gnu.org/licenses/>.  *
 ***************************************************************************/

#include <linux/hid.h>
#include <linux/hid-debug.h>
#include <linux/input.h>
#include "hid-ids.h"

#include <linux/fb.h>
#include <linux/vmalloc.h>
#include <linux/backlight.h>
#include <linux/lcd.h>

#include <linux/leds.h>

#include <linux/seq_file.h>
#include <linux/debugfs.h>

#include <linux/completion.h>
#include <linux/uaccess.h>
#include <linux/module.h>
#include <media/rc-core.h>

#include "hid-picolcd.h"


int picolcd_raw_cir(struct picolcd_data *data,
		struct hid_report *report, u8 *raw_data, int size)
{
	unsigned long flags;
	int i, w, sz;
	DEFINE_IR_RAW_EVENT(rawir);

	/* ignore if rc_dev is NULL or status is shunned */
	spin_lock_irqsave(&data->lock, flags);
	if (!data->rc_dev || (data->status & PICOLCD_CIR_SHUN)) {
		spin_unlock_irqrestore(&data->lock, flags);
		return 1;
	}
	spin_unlock_irqrestore(&data->lock, flags);

	/* PicoLCD USB packets contain 16-bit intervals in network order,
	 * with value negated for pulse. Intervals are in microseconds.
	 *
	 * Note: some userspace LIRC code for PicoLCD says negated values
	 * for space - is it a matter of IR chip? (pulse for my TSOP2236)
	 *
	 * In addition, the first interval seems to be around 15000 + base
	 * interval for non-first report of IR data - thus the quirk below
	 * to get RC_CODE to understand Sony and JVC remotes I have at hand
	 */
	sz = size > 0 ? min((int)raw_data[0], size-1) : 0;
	for (i = 0; i+1 < sz; i += 2) {
		init_ir_raw_event(&rawir);
		w = (raw_data[i] << 8) | (raw_data[i+1]);
		rawir.pulse = !!(w & 0x8000);
		rawir.duration = US_TO_NS(rawir.pulse ? (65536 - w) : w);
		/* Quirk!! - see above */
		if (i == 0 && rawir.duration > 15000000)
			rawir.duration -= 15000000;
		ir_raw_event_store(data->rc_dev, &rawir);
	}
	ir_raw_event_handle(data->rc_dev);

	return 1;
}

static int picolcd_cir_open(struct rc_dev *dev)
{
	struct picolcd_data *data = dev->priv;
	unsigned long flags;

	spin_lock_irqsave(&data->lock, flags);
	data->status &= ~PICOLCD_CIR_SHUN;
	spin_unlock_irqrestore(&data->lock, flags);
	return 0;
}

static void picolcd_cir_close(struct rc_dev *dev)
{
	struct picolcd_data *data = dev->priv;
	unsigned long flags;

	spin_lock_irqsave(&data->lock, flags);
	data->status |= PICOLCD_CIR_SHUN;
	spin_unlock_irqrestore(&data->lock, flags);
}

/* initialize CIR input device */
int picolcd_init_cir(struct picolcd_data *data, struct hid_report *report)
{
	struct rc_dev *rdev;
	int ret = 0;

	rdev = rc_allocate_device(RC_DRIVER_IR_RAW);
	if (!rdev)
		return -ENOMEM;

	rdev->priv             = data;
	rdev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
	rdev->open             = picolcd_cir_open;
	rdev->close            = picolcd_cir_close;
	rdev->device_name      = data->hdev->name;
	rdev->input_phys       = data->hdev->phys;
	rdev->input_id.bustype = data->hdev->bus;
	rdev->input_id.vendor  = data->hdev->vendor;
	rdev->input_id.product = data->hdev->product;
	rdev->input_id.version = data->hdev->version;
	rdev->dev.parent       = &data->hdev->dev;
	rdev->driver_name      = PICOLCD_NAME;
	rdev->map_name         = RC_MAP_RC6_MCE;
	rdev->timeout          = MS_TO_NS(100);
	rdev->rx_resolution    = US_TO_NS(1);

	ret = rc_register_device(rdev);
	if (ret)
		goto err;
	data->rc_dev = rdev;
	return 0;

err:
	rc_free_device(rdev);
	return ret;
}

void picolcd_exit_cir(struct picolcd_data *data)
{
	struct rc_dev *rdev = data->rc_dev;

	data->rc_dev = NULL;
	rc_unregister_device(rdev);
}