blob: 5a5b3535411f6cc9f34d2a6c6fc56c63bd2ede67 [file] [log] [blame]
/* drivers/gpu/drm/exynos5433_drm_decon.c
*
* Copyright (C) 2015 Samsung Electronics Co.Ltd
* Authors:
* Joonyoung Shim <jy0922.shim@samsung.com>
* Hyungwon Hwang <human.hwang@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundationr
*/
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/component.h>
#include <linux/iopoll.h>
#include <linux/irq.h>
#include <linux/mfd/syscon.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <video/exynos5433_decon.h>
#include "exynos_drm_drv.h"
#include "exynos_drm_crtc.h"
#include "exynos_drm_fb.h"
#include "exynos_drm_plane.h"
#include "exynos_drm_iommu.h"
#define DSD_CFG_MUX 0x1004
#define DSD_CFG_MUX_TE_UNMASK_GLOBAL BIT(13)
#define WINDOWS_NR 3
#define MIN_FB_WIDTH_FOR_16WORD_BURST 128
#define I80_HW_TRG (1 << 0)
#define IFTYPE_HDMI (1 << 1)
static const char * const decon_clks_name[] = {
"pclk",
"aclk_decon",
"aclk_smmu_decon0x",
"aclk_xiu_decon0x",
"pclk_smmu_decon0x",
"sclk_decon_vclk",
"sclk_decon_eclk",
};
struct decon_context {
struct device *dev;
struct drm_device *drm_dev;
struct exynos_drm_crtc *crtc;
struct exynos_drm_plane planes[WINDOWS_NR];
struct exynos_drm_plane_config configs[WINDOWS_NR];
void __iomem *addr;
struct regmap *sysreg;
struct clk *clks[ARRAY_SIZE(decon_clks_name)];
unsigned int irq;
unsigned int irq_vsync;
unsigned int irq_lcd_sys;
unsigned int te_irq;
unsigned long out_type;
int first_win;
spinlock_t vblank_lock;
u32 frame_id;
};
static const uint32_t decon_formats[] = {
DRM_FORMAT_XRGB1555,
DRM_FORMAT_RGB565,
DRM_FORMAT_XRGB8888,
DRM_FORMAT_ARGB8888,
};
static const enum drm_plane_type decon_win_types[WINDOWS_NR] = {
DRM_PLANE_TYPE_PRIMARY,
DRM_PLANE_TYPE_OVERLAY,
DRM_PLANE_TYPE_CURSOR,
};
static inline void decon_set_bits(struct decon_context *ctx, u32 reg, u32 mask,
u32 val)
{
val = (val & mask) | (readl(ctx->addr + reg) & ~mask);
writel(val, ctx->addr + reg);
}
static int decon_enable_vblank(struct exynos_drm_crtc *crtc)
{
struct decon_context *ctx = crtc->ctx;
u32 val;
val = VIDINTCON0_INTEN;
if (crtc->i80_mode)
val |= VIDINTCON0_FRAMEDONE;
else
val |= VIDINTCON0_INTFRMEN | VIDINTCON0_FRAMESEL_FP;
writel(val, ctx->addr + DECON_VIDINTCON0);
enable_irq(ctx->irq);
if (!(ctx->out_type & I80_HW_TRG))
enable_irq(ctx->te_irq);
return 0;
}
static void decon_disable_vblank(struct exynos_drm_crtc *crtc)
{
struct decon_context *ctx = crtc->ctx;
if (!(ctx->out_type & I80_HW_TRG))
disable_irq_nosync(ctx->te_irq);
disable_irq_nosync(ctx->irq);
writel(0, ctx->addr + DECON_VIDINTCON0);
}
/* return number of starts/ends of frame transmissions since reset */
static u32 decon_get_frame_count(struct decon_context *ctx, bool end)
{
u32 frm, pfrm, status, cnt = 2;
/* To get consistent result repeat read until frame id is stable.
* Usually the loop will be executed once, in rare cases when the loop
* is executed at frame change time 2nd pass will be needed.
*/
frm = readl(ctx->addr + DECON_CRFMID);
do {
status = readl(ctx->addr + DECON_VIDCON1);
pfrm = frm;
frm = readl(ctx->addr + DECON_CRFMID);
} while (frm != pfrm && --cnt);
/* CRFMID is incremented on BPORCH in case of I80 and on VSYNC in case
* of RGB, it should be taken into account.
*/
if (!frm)
return 0;
switch (status & (VIDCON1_VSTATUS_MASK | VIDCON1_I80_ACTIVE)) {
case VIDCON1_VSTATUS_VS:
if (!(ctx->crtc->i80_mode))
--frm;
break;
case VIDCON1_VSTATUS_BP:
--frm;
break;
case VIDCON1_I80_ACTIVE:
case VIDCON1_VSTATUS_AC:
if (end)
--frm;
break;
default:
break;
}
return frm;
}
static void decon_setup_trigger(struct decon_context *ctx)
{
if (!ctx->crtc->i80_mode && !(ctx->out_type & I80_HW_TRG))
return;
if (!(ctx->out_type & I80_HW_TRG)) {
writel(TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F |
TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN,
ctx->addr + DECON_TRIGCON);
return;
}
writel(TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | TRIGCON_HWTRIGMASK
| TRIGCON_HWTRIGEN, ctx->addr + DECON_TRIGCON);
if (regmap_update_bits(ctx->sysreg, DSD_CFG_MUX,
DSD_CFG_MUX_TE_UNMASK_GLOBAL, ~0))
DRM_ERROR("Cannot update sysreg.\n");
}
static void decon_commit(struct exynos_drm_crtc *crtc)
{
struct decon_context *ctx = crtc->ctx;
struct drm_display_mode *m = &crtc->base.mode;
bool interlaced = false;
u32 val;
if (ctx->out_type & IFTYPE_HDMI) {
m->crtc_hsync_start = m->crtc_hdisplay + 10;
m->crtc_hsync_end = m->crtc_htotal - 92;
m->crtc_vsync_start = m->crtc_vdisplay + 1;
m->crtc_vsync_end = m->crtc_vsync_start + 1;
if (m->flags & DRM_MODE_FLAG_INTERLACE)
interlaced = true;
}
decon_setup_trigger(ctx);
/* lcd on and use command if */
val = VIDOUT_LCD_ON;
if (interlaced)
val |= VIDOUT_INTERLACE_EN_F;
if (crtc->i80_mode) {
val |= VIDOUT_COMMAND_IF;
} else {
val |= VIDOUT_RGB_IF;
}
writel(val, ctx->addr + DECON_VIDOUTCON0);
if (interlaced)
val = VIDTCON2_LINEVAL(m->vdisplay / 2 - 1) |
VIDTCON2_HOZVAL(m->hdisplay - 1);
else
val = VIDTCON2_LINEVAL(m->vdisplay - 1) |
VIDTCON2_HOZVAL(m->hdisplay - 1);
writel(val, ctx->addr + DECON_VIDTCON2);
if (!crtc->i80_mode) {
int vbp = m->crtc_vtotal - m->crtc_vsync_end;
int vfp = m->crtc_vsync_start - m->crtc_vdisplay;
if (interlaced)
vbp = vbp / 2 - 1;
val = VIDTCON00_VBPD_F(vbp - 1) | VIDTCON00_VFPD_F(vfp - 1);
writel(val, ctx->addr + DECON_VIDTCON00);
val = VIDTCON01_VSPW_F(
m->crtc_vsync_end - m->crtc_vsync_start - 1);
writel(val, ctx->addr + DECON_VIDTCON01);
val = VIDTCON10_HBPD_F(
m->crtc_htotal - m->crtc_hsync_end - 1) |
VIDTCON10_HFPD_F(
m->crtc_hsync_start - m->crtc_hdisplay - 1);
writel(val, ctx->addr + DECON_VIDTCON10);
val = VIDTCON11_HSPW_F(
m->crtc_hsync_end - m->crtc_hsync_start - 1);
writel(val, ctx->addr + DECON_VIDTCON11);
}
/* enable output and display signal */
decon_set_bits(ctx, DECON_VIDCON0, VIDCON0_ENVID | VIDCON0_ENVID_F, ~0);
decon_set_bits(ctx, DECON_UPDATE, STANDALONE_UPDATE_F, ~0);
}
static void decon_win_set_pixfmt(struct decon_context *ctx, unsigned int win,
struct drm_framebuffer *fb)
{
unsigned long val;
val = readl(ctx->addr + DECON_WINCONx(win));
val &= WINCONx_ENWIN_F;
switch (fb->format->format) {
case DRM_FORMAT_XRGB1555:
val |= WINCONx_BPPMODE_16BPP_I1555;
val |= WINCONx_HAWSWP_F;
val |= WINCONx_BURSTLEN_16WORD;
break;
case DRM_FORMAT_RGB565:
val |= WINCONx_BPPMODE_16BPP_565;
val |= WINCONx_HAWSWP_F;
val |= WINCONx_BURSTLEN_16WORD;
break;
case DRM_FORMAT_XRGB8888:
val |= WINCONx_BPPMODE_24BPP_888;
val |= WINCONx_WSWP_F;
val |= WINCONx_BURSTLEN_16WORD;
break;
case DRM_FORMAT_ARGB8888:
default:
val |= WINCONx_BPPMODE_32BPP_A8888;
val |= WINCONx_WSWP_F | WINCONx_BLD_PIX_F | WINCONx_ALPHA_SEL_F;
val |= WINCONx_BURSTLEN_16WORD;
break;
}
DRM_DEBUG_KMS("cpp = %u\n", fb->format->cpp[0]);
/*
* In case of exynos, setting dma-burst to 16Word causes permanent
* tearing for very small buffers, e.g. cursor buffer. Burst Mode
* switching which is based on plane size is not recommended as
* plane size varies a lot towards the end of the screen and rapid
* movement causes unstable DMA which results into iommu crash/tear.
*/
if (fb->width < MIN_FB_WIDTH_FOR_16WORD_BURST) {
val &= ~WINCONx_BURSTLEN_MASK;
val |= WINCONx_BURSTLEN_8WORD;
}
writel(val, ctx->addr + DECON_WINCONx(win));
}
static void decon_shadow_protect(struct decon_context *ctx, bool protect)
{
decon_set_bits(ctx, DECON_SHADOWCON, SHADOWCON_PROTECT_MASK,
protect ? ~0 : 0);
}
static void decon_atomic_begin(struct exynos_drm_crtc *crtc)
{
struct decon_context *ctx = crtc->ctx;
decon_shadow_protect(ctx, true);
}
#define BIT_VAL(x, e, s) (((x) & ((1 << ((e) - (s) + 1)) - 1)) << (s))
#define COORDINATE_X(x) BIT_VAL((x), 23, 12)
#define COORDINATE_Y(x) BIT_VAL((x), 11, 0)
static void decon_update_plane(struct exynos_drm_crtc *crtc,
struct exynos_drm_plane *plane)
{
struct exynos_drm_plane_state *state =
to_exynos_plane_state(plane->base.state);
struct decon_context *ctx = crtc->ctx;
struct drm_framebuffer *fb = state->base.fb;
unsigned int win = plane->index;
unsigned int cpp = fb->format->cpp[0];
unsigned int pitch = fb->pitches[0];
dma_addr_t dma_addr = exynos_drm_fb_dma_addr(fb, 0);
u32 val;
if (crtc->base.mode.flags & DRM_MODE_FLAG_INTERLACE) {
val = COORDINATE_X(state->crtc.x) |
COORDINATE_Y(state->crtc.y / 2);
writel(val, ctx->addr + DECON_VIDOSDxA(win));
val = COORDINATE_X(state->crtc.x + state->crtc.w - 1) |
COORDINATE_Y((state->crtc.y + state->crtc.h) / 2 - 1);
writel(val, ctx->addr + DECON_VIDOSDxB(win));
} else {
val = COORDINATE_X(state->crtc.x) | COORDINATE_Y(state->crtc.y);
writel(val, ctx->addr + DECON_VIDOSDxA(win));
val = COORDINATE_X(state->crtc.x + state->crtc.w - 1) |
COORDINATE_Y(state->crtc.y + state->crtc.h - 1);
writel(val, ctx->addr + DECON_VIDOSDxB(win));
}
val = VIDOSD_Wx_ALPHA_R_F(0xff) | VIDOSD_Wx_ALPHA_G_F(0xff) |
VIDOSD_Wx_ALPHA_B_F(0xff);
writel(val, ctx->addr + DECON_VIDOSDxC(win));
val = VIDOSD_Wx_ALPHA_R_F(0x0) | VIDOSD_Wx_ALPHA_G_F(0x0) |
VIDOSD_Wx_ALPHA_B_F(0x0);
writel(val, ctx->addr + DECON_VIDOSDxD(win));
writel(dma_addr, ctx->addr + DECON_VIDW0xADD0B0(win));
val = dma_addr + pitch * state->src.h;
writel(val, ctx->addr + DECON_VIDW0xADD1B0(win));
if (!(ctx->out_type & IFTYPE_HDMI))
val = BIT_VAL(pitch - state->crtc.w * cpp, 27, 14)
| BIT_VAL(state->crtc.w * cpp, 13, 0);
else
val = BIT_VAL(pitch - state->crtc.w * cpp, 29, 15)
| BIT_VAL(state->crtc.w * cpp, 14, 0);
writel(val, ctx->addr + DECON_VIDW0xADD2(win));
decon_win_set_pixfmt(ctx, win, fb);
/* window enable */
decon_set_bits(ctx, DECON_WINCONx(win), WINCONx_ENWIN_F, ~0);
}
static void decon_disable_plane(struct exynos_drm_crtc *crtc,
struct exynos_drm_plane *plane)
{
struct decon_context *ctx = crtc->ctx;
unsigned int win = plane->index;
decon_set_bits(ctx, DECON_WINCONx(win), WINCONx_ENWIN_F, 0);
}
static void decon_atomic_flush(struct exynos_drm_crtc *crtc)
{
struct decon_context *ctx = crtc->ctx;
unsigned long flags;
spin_lock_irqsave(&ctx->vblank_lock, flags);
decon_shadow_protect(ctx, false);
decon_set_bits(ctx, DECON_UPDATE, STANDALONE_UPDATE_F, ~0);
ctx->frame_id = decon_get_frame_count(ctx, true);
exynos_crtc_handle_event(crtc);
spin_unlock_irqrestore(&ctx->vblank_lock, flags);
}
static void decon_swreset(struct decon_context *ctx)
{
unsigned long flags;
u32 val;
int ret;
writel(0, ctx->addr + DECON_VIDCON0);
readl_poll_timeout(ctx->addr + DECON_VIDCON0, val,
~val & VIDCON0_STOP_STATUS, 12, 20000);
writel(VIDCON0_SWRESET, ctx->addr + DECON_VIDCON0);
ret = readl_poll_timeout(ctx->addr + DECON_VIDCON0, val,
~val & VIDCON0_SWRESET, 12, 20000);
WARN(ret < 0, "failed to software reset DECON\n");
spin_lock_irqsave(&ctx->vblank_lock, flags);
ctx->frame_id = 0;
spin_unlock_irqrestore(&ctx->vblank_lock, flags);
if (!(ctx->out_type & IFTYPE_HDMI))
return;
writel(VIDCON0_CLKVALUP | VIDCON0_VLCKFREE, ctx->addr + DECON_VIDCON0);
decon_set_bits(ctx, DECON_CMU,
CMU_CLKGAGE_MODE_SFR_F | CMU_CLKGAGE_MODE_MEM_F, ~0);
writel(VIDCON1_VCLK_RUN_VDEN_DISABLE, ctx->addr + DECON_VIDCON1);
writel(CRCCTRL_CRCEN | CRCCTRL_CRCSTART_F | CRCCTRL_CRCCLKEN,
ctx->addr + DECON_CRCCTRL);
}
static void decon_enable(struct exynos_drm_crtc *crtc)
{
struct decon_context *ctx = crtc->ctx;
pm_runtime_get_sync(ctx->dev);
exynos_drm_pipe_clk_enable(crtc, true);
decon_swreset(ctx);
decon_commit(ctx->crtc);
}
static void decon_disable(struct exynos_drm_crtc *crtc)
{
struct decon_context *ctx = crtc->ctx;
int i;
if (!(ctx->out_type & I80_HW_TRG))
synchronize_irq(ctx->te_irq);
synchronize_irq(ctx->irq);
/*
* We need to make sure that all windows are disabled before we
* suspend that connector. Otherwise we might try to scan from
* a destroyed buffer later.
*/
for (i = ctx->first_win; i < WINDOWS_NR; i++)
decon_disable_plane(crtc, &ctx->planes[i]);
decon_swreset(ctx);
exynos_drm_pipe_clk_enable(crtc, false);
pm_runtime_put_sync(ctx->dev);
}
static irqreturn_t decon_te_irq_handler(int irq, void *dev_id)
{
struct decon_context *ctx = dev_id;
decon_set_bits(ctx, DECON_TRIGCON, TRIGCON_SWTRIGCMD, ~0);
return IRQ_HANDLED;
}
static void decon_clear_channels(struct exynos_drm_crtc *crtc)
{
struct decon_context *ctx = crtc->ctx;
int win, i, ret;
DRM_DEBUG_KMS("%s\n", __FILE__);
for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) {
ret = clk_prepare_enable(ctx->clks[i]);
if (ret < 0)
goto err;
}
decon_shadow_protect(ctx, true);
for (win = 0; win < WINDOWS_NR; win++)
decon_set_bits(ctx, DECON_WINCONx(win), WINCONx_ENWIN_F, 0);
decon_shadow_protect(ctx, false);
decon_set_bits(ctx, DECON_UPDATE, STANDALONE_UPDATE_F, ~0);
/* TODO: wait for possible vsync */
msleep(50);
err:
while (--i >= 0)
clk_disable_unprepare(ctx->clks[i]);
}
static enum drm_mode_status decon_mode_valid(struct exynos_drm_crtc *crtc,
const struct drm_display_mode *mode)
{
struct decon_context *ctx = crtc->ctx;
ctx->irq = crtc->i80_mode ? ctx->irq_lcd_sys : ctx->irq_vsync;
if (ctx->irq)
return MODE_OK;
dev_info(ctx->dev, "Sink requires %s mode, but appropriate interrupt is not provided.\n",
crtc->i80_mode ? "command" : "video");
return MODE_BAD;
}
static const struct exynos_drm_crtc_ops decon_crtc_ops = {
.enable = decon_enable,
.disable = decon_disable,
.enable_vblank = decon_enable_vblank,
.disable_vblank = decon_disable_vblank,
.atomic_begin = decon_atomic_begin,
.update_plane = decon_update_plane,
.disable_plane = decon_disable_plane,
.mode_valid = decon_mode_valid,
.atomic_flush = decon_atomic_flush,
};
static int decon_bind(struct device *dev, struct device *master, void *data)
{
struct decon_context *ctx = dev_get_drvdata(dev);
struct drm_device *drm_dev = data;
struct exynos_drm_plane *exynos_plane;
enum exynos_drm_output_type out_type;
unsigned int win;
int ret;
ctx->drm_dev = drm_dev;
for (win = ctx->first_win; win < WINDOWS_NR; win++) {
int tmp = (win == ctx->first_win) ? 0 : win;
ctx->configs[win].pixel_formats = decon_formats;
ctx->configs[win].num_pixel_formats = ARRAY_SIZE(decon_formats);
ctx->configs[win].zpos = win;
ctx->configs[win].type = decon_win_types[tmp];
ret = exynos_plane_init(drm_dev, &ctx->planes[win], win,
&ctx->configs[win]);
if (ret)
return ret;
}
exynos_plane = &ctx->planes[ctx->first_win];
out_type = (ctx->out_type & IFTYPE_HDMI) ? EXYNOS_DISPLAY_TYPE_HDMI
: EXYNOS_DISPLAY_TYPE_LCD;
ctx->crtc = exynos_drm_crtc_create(drm_dev, &exynos_plane->base,
out_type, &decon_crtc_ops, ctx);
if (IS_ERR(ctx->crtc))
return PTR_ERR(ctx->crtc);
decon_clear_channels(ctx->crtc);
return drm_iommu_attach_device(drm_dev, dev);
}
static void decon_unbind(struct device *dev, struct device *master, void *data)
{
struct decon_context *ctx = dev_get_drvdata(dev);
decon_disable(ctx->crtc);
/* detach this sub driver from iommu mapping if supported. */
drm_iommu_detach_device(ctx->drm_dev, ctx->dev);
}
static const struct component_ops decon_component_ops = {
.bind = decon_bind,
.unbind = decon_unbind,
};
static void decon_handle_vblank(struct decon_context *ctx)
{
u32 frm;
spin_lock(&ctx->vblank_lock);
frm = decon_get_frame_count(ctx, true);
if (frm != ctx->frame_id) {
/* handle only if incremented, take care of wrap-around */
if ((s32)(frm - ctx->frame_id) > 0)
drm_crtc_handle_vblank(&ctx->crtc->base);
ctx->frame_id = frm;
}
spin_unlock(&ctx->vblank_lock);
}
static irqreturn_t decon_irq_handler(int irq, void *dev_id)
{
struct decon_context *ctx = dev_id;
u32 val;
val = readl(ctx->addr + DECON_VIDINTCON1);
val &= VIDINTCON1_INTFRMDONEPEND | VIDINTCON1_INTFRMPEND;
if (val) {
writel(val, ctx->addr + DECON_VIDINTCON1);
if (ctx->out_type & IFTYPE_HDMI) {
val = readl(ctx->addr + DECON_VIDOUTCON0);
val &= VIDOUT_INTERLACE_EN_F | VIDOUT_INTERLACE_FIELD_F;
if (val ==
(VIDOUT_INTERLACE_EN_F | VIDOUT_INTERLACE_FIELD_F))
return IRQ_HANDLED;
}
decon_handle_vblank(ctx);
}
return IRQ_HANDLED;
}
#ifdef CONFIG_PM
static int exynos5433_decon_suspend(struct device *dev)
{
struct decon_context *ctx = dev_get_drvdata(dev);
int i = ARRAY_SIZE(decon_clks_name);
while (--i >= 0)
clk_disable_unprepare(ctx->clks[i]);
return 0;
}
static int exynos5433_decon_resume(struct device *dev)
{
struct decon_context *ctx = dev_get_drvdata(dev);
int i, ret;
for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) {
ret = clk_prepare_enable(ctx->clks[i]);
if (ret < 0)
goto err;
}
return 0;
err:
while (--i >= 0)
clk_disable_unprepare(ctx->clks[i]);
return ret;
}
#endif
static const struct dev_pm_ops exynos5433_decon_pm_ops = {
SET_RUNTIME_PM_OPS(exynos5433_decon_suspend, exynos5433_decon_resume,
NULL)
};
static const struct of_device_id exynos5433_decon_driver_dt_match[] = {
{
.compatible = "samsung,exynos5433-decon",
.data = (void *)I80_HW_TRG
},
{
.compatible = "samsung,exynos5433-decon-tv",
.data = (void *)(I80_HW_TRG | IFTYPE_HDMI)
},
{},
};
MODULE_DEVICE_TABLE(of, exynos5433_decon_driver_dt_match);
static int decon_conf_irq(struct decon_context *ctx, const char *name,
irq_handler_t handler, unsigned long int flags)
{
struct platform_device *pdev = to_platform_device(ctx->dev);
int ret, irq = platform_get_irq_byname(pdev, name);
if (irq < 0) {
switch (irq) {
case -EPROBE_DEFER:
return irq;
case -ENODATA:
case -ENXIO:
return 0;
default:
dev_err(ctx->dev, "IRQ %s get failed, %d\n", name, irq);
return irq;
}
}
irq_set_status_flags(irq, IRQ_NOAUTOEN);
ret = devm_request_irq(ctx->dev, irq, handler, flags, "drm_decon", ctx);
if (ret < 0) {
dev_err(ctx->dev, "IRQ %s request failed\n", name);
return ret;
}
return irq;
}
static int exynos5433_decon_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct decon_context *ctx;
struct resource *res;
int ret;
int i;
ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
ctx->dev = dev;
ctx->out_type = (unsigned long)of_device_get_match_data(dev);
spin_lock_init(&ctx->vblank_lock);
if (ctx->out_type & IFTYPE_HDMI)
ctx->first_win = 1;
for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) {
struct clk *clk;
clk = devm_clk_get(ctx->dev, decon_clks_name[i]);
if (IS_ERR(clk))
return PTR_ERR(clk);
ctx->clks[i] = clk;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "cannot find IO resource\n");
return -ENXIO;
}
ctx->addr = devm_ioremap_resource(dev, res);
if (IS_ERR(ctx->addr)) {
dev_err(dev, "ioremap failed\n");
return PTR_ERR(ctx->addr);
}
ret = decon_conf_irq(ctx, "vsync", decon_irq_handler, 0);
if (ret < 0)
return ret;
ctx->irq_vsync = ret;
ret = decon_conf_irq(ctx, "lcd_sys", decon_irq_handler, 0);
if (ret < 0)
return ret;
ctx->irq_lcd_sys = ret;
ret = decon_conf_irq(ctx, "te", decon_te_irq_handler,
IRQF_TRIGGER_RISING);
if (ret < 0)
return ret;
if (ret) {
ctx->te_irq = ret;
ctx->out_type &= ~I80_HW_TRG;
}
if (ctx->out_type & I80_HW_TRG) {
ctx->sysreg = syscon_regmap_lookup_by_phandle(dev->of_node,
"samsung,disp-sysreg");
if (IS_ERR(ctx->sysreg)) {
dev_err(dev, "failed to get system register\n");
return PTR_ERR(ctx->sysreg);
}
}
platform_set_drvdata(pdev, ctx);
pm_runtime_enable(dev);
ret = component_add(dev, &decon_component_ops);
if (ret)
goto err_disable_pm_runtime;
return 0;
err_disable_pm_runtime:
pm_runtime_disable(dev);
return ret;
}
static int exynos5433_decon_remove(struct platform_device *pdev)
{
pm_runtime_disable(&pdev->dev);
component_del(&pdev->dev, &decon_component_ops);
return 0;
}
struct platform_driver exynos5433_decon_driver = {
.probe = exynos5433_decon_probe,
.remove = exynos5433_decon_remove,
.driver = {
.name = "exynos5433-decon",
.pm = &exynos5433_decon_pm_ops,
.of_match_table = exynos5433_decon_driver_dt_match,
},
};