/*
 *  Copyright (c) 2018 The WebRTC project authors. All Rights Reserved.
 *
 *  Use of this source code is governed by a BSD-style license
 *  that can be found in the LICENSE file in the root of the source
 *  tree. An additional intellectual property rights grant can be found
 *  in the file PATENTS.  All contributing project authors may
 *  be found in the AUTHORS file in the root of the source tree.
 */

#include "modules/audio_processing/aec3/signal_dependent_erle_estimator.h"

#include <algorithm>
#include <functional>
#include <numeric>

#include "modules/audio_processing/aec3/vector_buffer.h"
#include "rtc_base/numerics/safe_minmax.h"

namespace webrtc {

namespace {

constexpr std::array<size_t, SignalDependentErleEstimator::kSubbands + 1>
    kBandBoundaries = {1, 8, 16, 24, 32, 48, kFftLengthBy2Plus1};

std::array<size_t, kFftLengthBy2Plus1> FormSubbandMap() {
  std::array<size_t, kFftLengthBy2Plus1> map_band_to_subband;
  size_t subband = 1;
  for (size_t k = 0; k < map_band_to_subband.size(); ++k) {
    RTC_DCHECK_LT(subband, kBandBoundaries.size());
    if (k >= kBandBoundaries[subband]) {
      subband++;
      RTC_DCHECK_LT(k, kBandBoundaries[subband]);
    }
    map_band_to_subband[k] = subband - 1;
  }
  return map_band_to_subband;
}

// Defines the size in blocks of the sections that are used for dividing the
// linear filter. The sections are split in a non-linear manner so that lower
// sections that typically represent the direct path have a larger resolution
// than the higher sections which typically represent more reverberant acoustic
// paths.
std::vector<size_t> DefineFilterSectionSizes(size_t delay_headroom_blocks,
                                             size_t num_blocks,
                                             size_t num_sections) {
  size_t filter_length_blocks = num_blocks - delay_headroom_blocks;
  std::vector<size_t> section_sizes(num_sections);
  size_t remaining_blocks = filter_length_blocks;
  size_t remaining_sections = num_sections;
  size_t estimator_size = 2;
  size_t idx = 0;
  while (remaining_sections > 1 &&
         remaining_blocks > estimator_size * remaining_sections) {
    RTC_DCHECK_LT(idx, section_sizes.size());
    section_sizes[idx] = estimator_size;
    remaining_blocks -= estimator_size;
    remaining_sections--;
    estimator_size *= 2;
    idx++;
  }

  size_t last_groups_size = remaining_blocks / remaining_sections;
  for (; idx < num_sections; idx++) {
    section_sizes[idx] = last_groups_size;
  }
  section_sizes[num_sections - 1] +=
      remaining_blocks - last_groups_size * remaining_sections;
  return section_sizes;
}

// Forms the limits in blocks for each filter section. Those sections
// are used for analyzing the echo estimates and investigating which
// linear filter sections contribute most to the echo estimate energy.
std::vector<size_t> SetSectionsBoundaries(size_t delay_headroom_blocks,
                                          size_t num_blocks,
                                          size_t num_sections) {
  std::vector<size_t> estimator_boundaries_blocks(num_sections + 1);
  if (estimator_boundaries_blocks.size() == 2) {
    estimator_boundaries_blocks[0] = 0;
    estimator_boundaries_blocks[1] = num_blocks;
    return estimator_boundaries_blocks;
  }
  RTC_DCHECK_GT(estimator_boundaries_blocks.size(), 2);
  const std::vector<size_t> section_sizes =
      DefineFilterSectionSizes(delay_headroom_blocks, num_blocks,
                               estimator_boundaries_blocks.size() - 1);

  size_t idx = 0;
  size_t current_size_block = 0;
  RTC_DCHECK_EQ(section_sizes.size() + 1, estimator_boundaries_blocks.size());
  estimator_boundaries_blocks[0] = delay_headroom_blocks;
  for (size_t k = delay_headroom_blocks; k < num_blocks; ++k) {
    current_size_block++;
    if (current_size_block >= section_sizes[idx]) {
      idx = idx + 1;
      if (idx == section_sizes.size()) {
        break;
      }
      estimator_boundaries_blocks[idx] = k + 1;
      current_size_block = 0;
    }
  }
  estimator_boundaries_blocks[section_sizes.size()] = num_blocks;
  return estimator_boundaries_blocks;
}

std::array<float, SignalDependentErleEstimator::kSubbands>
SetMaxErleSubbands(float max_erle_l, float max_erle_h, size_t limit_subband_l) {
  std::array<float, SignalDependentErleEstimator::kSubbands> max_erle;
  std::fill(max_erle.begin(), max_erle.begin() + limit_subband_l, max_erle_l);
  std::fill(max_erle.begin() + limit_subband_l, max_erle.end(), max_erle_h);
  return max_erle;
}

}  // namespace

SignalDependentErleEstimator::SignalDependentErleEstimator(
    const EchoCanceller3Config& config)
    : min_erle_(config.erle.min),
      num_sections_(config.erle.num_sections),
      num_blocks_(config.filter.main.length_blocks),
      delay_headroom_blocks_(config.delay.delay_headroom_blocks),
      band_to_subband_(FormSubbandMap()),
      max_erle_(SetMaxErleSubbands(config.erle.max_l,
                                   config.erle.max_h,
                                   band_to_subband_[kFftLengthBy2 / 2])),
      section_boundaries_blocks_(SetSectionsBoundaries(delay_headroom_blocks_,
                                                       num_blocks_,
                                                       num_sections_)),
      S2_section_accum_(num_sections_),
      erle_estimators_(num_sections_),
      correction_factors_(num_sections_) {
  RTC_DCHECK_LE(num_sections_, num_blocks_);
  RTC_DCHECK_GE(num_sections_, 1);

  Reset();
}

SignalDependentErleEstimator::~SignalDependentErleEstimator() = default;

void SignalDependentErleEstimator::Reset() {
  erle_.fill(min_erle_);
  for (auto& erle : erle_estimators_) {
    erle.fill(min_erle_);
  }
  erle_ref_.fill(min_erle_);
  for (auto& factor : correction_factors_) {
    factor.fill(1.0f);
  }
  num_updates_.fill(0);
}

// Updates the Erle estimate by analyzing the current input signals. It takes
// the render buffer and the filter frequency response in order to do an
// estimation of the number of sections of the linear filter that are needed
// for getting the majority of the energy in the echo estimate. Based on that
// number of sections, it updates the erle estimation by introducing a
// correction factor to the erle that is given as an input to this method.
void SignalDependentErleEstimator::Update(
    const RenderBuffer& render_buffer,
    const std::vector<std::array<float, kFftLengthBy2Plus1>>&
        filter_frequency_response,
    rtc::ArrayView<const float> X2,
    rtc::ArrayView<const float> Y2,
    rtc::ArrayView<const float> E2,
    rtc::ArrayView<const float> average_erle,
    bool converged_filter) {
  RTC_DCHECK_GT(num_sections_, 1);

  // Gets the number of filter sections that are needed for achieving 90 %
  // of the power spectrum energy of the echo estimate.
  std::array<size_t, kFftLengthBy2Plus1> n_active_sections;
  ComputeNumberOfActiveFilterSections(render_buffer, filter_frequency_response,
                                      n_active_sections);

  if (converged_filter) {
    // Updates the correction factor that is used for correcting the erle and
    // adapt it to the particular characteristics of the input signal.
    UpdateCorrectionFactors(X2, Y2, E2, n_active_sections);
  }

  // Applies the correction factor to the input erle for getting a more refined
  // erle estimation for the current input signal.
  for (size_t k = 0; k < kFftLengthBy2; ++k) {
    float correction_factor =
        correction_factors_[n_active_sections[k]][band_to_subband_[k]];
    erle_[k] = rtc::SafeClamp(average_erle[k] * correction_factor, min_erle_,
                              max_erle_[band_to_subband_[k]]);
  }
}

void SignalDependentErleEstimator::Dump(
    const std::unique_ptr<ApmDataDumper>& data_dumper) const {
  for (auto& erle : erle_estimators_) {
    data_dumper->DumpRaw("aec3_all_erle", erle);
  }
  data_dumper->DumpRaw("aec3_ref_erle", erle_ref_);
  for (auto& factor : correction_factors_) {
    data_dumper->DumpRaw("aec3_erle_correction_factor", factor);
  }
  data_dumper->DumpRaw("aec3_erle", erle_);
}

// Estimates for each band the smallest number of sections in the filter that
// together constitute 90% of the estimated echo energy.
void SignalDependentErleEstimator::ComputeNumberOfActiveFilterSections(
    const RenderBuffer& render_buffer,
    const std::vector<std::array<float, kFftLengthBy2Plus1>>&
        filter_frequency_response,
    rtc::ArrayView<size_t> n_active_filter_sections) {
  RTC_DCHECK_GT(num_sections_, 1);
  // Computes an approximation of the power spectrum if the filter would have
  // been limited to a certain number of filter sections.
  ComputeEchoEstimatePerFilterSection(render_buffer, filter_frequency_response);
  // For each band, computes the number of filter sections that are needed for
  // achieving the 90 % energy in the echo estimate.
  ComputeActiveFilterSections(n_active_filter_sections);
}

void SignalDependentErleEstimator::UpdateCorrectionFactors(
    rtc::ArrayView<const float> X2,
    rtc::ArrayView<const float> Y2,
    rtc::ArrayView<const float> E2,
    rtc::ArrayView<const size_t> n_active_sections) {
  constexpr float kX2BandEnergyThreshold = 44015068.0f;
  constexpr float kSmthConstantDecreases = 0.1f;
  constexpr float kSmthConstantIncreases = kSmthConstantDecreases / 2.f;
  auto subband_powers = [](rtc::ArrayView<const float> power_spectrum,
                           rtc::ArrayView<float> power_spectrum_subbands) {
    for (size_t subband = 0; subband < kSubbands; ++subband) {
      RTC_DCHECK_LE(kBandBoundaries[subband + 1], power_spectrum.size());
      power_spectrum_subbands[subband] = std::accumulate(
          power_spectrum.begin() + kBandBoundaries[subband],
          power_spectrum.begin() + kBandBoundaries[subband + 1], 0.f);
    }
  };

  std::array<float, kSubbands> X2_subbands, E2_subbands, Y2_subbands;
  subband_powers(X2, X2_subbands);
  subband_powers(E2, E2_subbands);
  subband_powers(Y2, Y2_subbands);
  std::array<size_t, kSubbands> idx_subbands;
  for (size_t subband = 0; subband < kSubbands; ++subband) {
    // When aggregating the number of active sections in the filter for
    // different bands we choose to take the minimum of all of them. As an
    // example, if for one of the bands it is the direct path its main
    // contributor to the final echo estimate, we consider the direct path is
    // as well the main contributor for the subband that contains that
    // particular band. That aggregate number of sections will be later used as
    // the identifier of the erle estimator that needs to be updated.
    RTC_DCHECK_LE(kBandBoundaries[subband + 1], n_active_sections.size());
    idx_subbands[subband] = *std::min_element(
        n_active_sections.begin() + kBandBoundaries[subband],
        n_active_sections.begin() + kBandBoundaries[subband + 1]);
  }

  std::array<float, kSubbands> new_erle;
  std::array<bool, kSubbands> is_erle_updated;
  is_erle_updated.fill(false);
  new_erle.fill(0.f);
  for (size_t subband = 0; subband < kSubbands; ++subband) {
    if (X2_subbands[subband] > kX2BandEnergyThreshold &&
        E2_subbands[subband] > 0) {
      new_erle[subband] = Y2_subbands[subband] / E2_subbands[subband];
      RTC_DCHECK_GT(new_erle[subband], 0);
      is_erle_updated[subband] = true;
      ++num_updates_[subband];
    }
  }

  for (size_t subband = 0; subband < kSubbands; ++subband) {
    const size_t idx = idx_subbands[subband];
    RTC_DCHECK_LT(idx, erle_estimators_.size());
    float alpha = new_erle[subband] > erle_estimators_[idx][subband]
                      ? kSmthConstantIncreases
                      : kSmthConstantDecreases;
    alpha = static_cast<float>(is_erle_updated[subband]) * alpha;
    erle_estimators_[idx][subband] +=
        alpha * (new_erle[subband] - erle_estimators_[idx][subband]);
    erle_estimators_[idx][subband] = rtc::SafeClamp(
        erle_estimators_[idx][subband], min_erle_, max_erle_[subband]);
  }

  for (size_t subband = 0; subband < kSubbands; ++subband) {
    float alpha = new_erle[subband] > erle_ref_[subband]
                      ? kSmthConstantIncreases
                      : kSmthConstantDecreases;
    alpha = static_cast<float>(is_erle_updated[subband]) * alpha;
    erle_ref_[subband] += alpha * (new_erle[subband] - erle_ref_[subband]);
    erle_ref_[subband] =
        rtc::SafeClamp(erle_ref_[subband], min_erle_, max_erle_[subband]);
  }

  for (size_t subband = 0; subband < kSubbands; ++subband) {
    constexpr int kNumUpdateThr = 50;
    if (is_erle_updated[subband] && num_updates_[subband] > kNumUpdateThr) {
      const size_t idx = idx_subbands[subband];
      RTC_DCHECK_GT(erle_ref_[subband], 0.f);
      // Computes the ratio between the erle that is updated using all the
      // points and the erle that is updated only on signals that share the
      // same number of active filter sections.
      float new_correction_factor =
          erle_estimators_[idx][subband] / erle_ref_[subband];

      correction_factors_[idx][subband] +=
          0.1f * (new_correction_factor - correction_factors_[idx][subband]);
    }
  }
}

void SignalDependentErleEstimator::ComputeEchoEstimatePerFilterSection(
    const RenderBuffer& render_buffer,
    const std::vector<std::array<float, kFftLengthBy2Plus1>>&
        filter_frequency_response) {
  const VectorBuffer& spectrum_render_buffer =
      render_buffer.GetSpectrumBuffer();

  RTC_DCHECK_EQ(S2_section_accum_.size() + 1,
                section_boundaries_blocks_.size());
  size_t idx_render = render_buffer.Position();
  idx_render = spectrum_render_buffer.OffsetIndex(
      idx_render, section_boundaries_blocks_[0]);

  for (size_t section = 0; section < num_sections_; ++section) {
    std::array<float, kFftLengthBy2Plus1> X2_section;
    std::array<float, kFftLengthBy2Plus1> H2_section;
    X2_section.fill(0.f);
    H2_section.fill(0.f);
    for (size_t block = section_boundaries_blocks_[section];
         block < section_boundaries_blocks_[section + 1]; ++block) {
      std::transform(X2_section.begin(), X2_section.end(),
                     spectrum_render_buffer.buffer[idx_render].begin(),
                     X2_section.begin(), std::plus<float>());
      std::transform(H2_section.begin(), H2_section.end(),
                     filter_frequency_response[block].begin(),
                     H2_section.begin(), std::plus<float>());
      idx_render = spectrum_render_buffer.IncIndex(idx_render);
    }

    std::transform(X2_section.begin(), X2_section.end(), H2_section.begin(),
                   S2_section_accum_[section].begin(),
                   std::multiplies<float>());
  }

  for (size_t section = 1; section < num_sections_; ++section) {
    std::transform(S2_section_accum_[section - 1].begin(),
                   S2_section_accum_[section - 1].end(),
                   S2_section_accum_[section].begin(),
                   S2_section_accum_[section].begin(), std::plus<float>());
  }
}

void SignalDependentErleEstimator::ComputeActiveFilterSections(
    rtc::ArrayView<size_t> number_active_filter_sections) const {
  std::fill(number_active_filter_sections.begin(),
            number_active_filter_sections.end(), 0);
  for (size_t k = 0; k < kFftLengthBy2Plus1; ++k) {
    size_t section = num_sections_;
    float target = 0.9f * S2_section_accum_[num_sections_ - 1][k];
    while (section > 0 && S2_section_accum_[section - 1][k] >= target) {
      number_active_filter_sections[k] = --section;
    }
  }
}
}  // namespace webrtc