tree: d5469f404fc749d23e6c39d15939489474233bb1 [path history] [tgz]
  1. auto_llvm_bisection.py
  2. auto_llvm_bisection_unittest.py
  3. bisect_clang_crashes.py
  4. bisect_clang_crashes_unittest.py
  5. cherrypick_cl.py
  6. chroot.py
  7. chroot_unittest.py
  8. copy_helpers_to_chromiumos_overlay.py
  9. custom_script_example.py
  10. failure_modes.py
  11. fetch_cros_sdk_rolls.py
  12. get_llvm_hash.py
  13. get_llvm_hash_unittest.py
  14. git.py
  15. git_llvm_rev.py
  16. git_llvm_rev_test.py
  17. git_unittest.py
  18. llvm_bisection.py
  19. llvm_bisection_unittest.py
  20. llvm_patch_management.py
  21. llvm_patch_management_unittest.py
  22. llvm_project.py
  23. modify_a_tryjob.py
  24. modify_a_tryjob_unittest.py
  25. nightly_revert_checker.py
  26. nightly_revert_checker_test.py
  27. patch_manager.py
  28. patch_manager_unittest.py
  29. README.md
  30. revert_checker.py
  31. revert_checker_test.py
  32. subprocess_helpers.py
  33. test_helpers.py
  34. update_all_tryjobs_with_auto.py
  35. update_chromeos_llvm_hash.py
  36. update_chromeos_llvm_hash_unittest.py
  37. update_packages_and_run_tests.py
  38. update_packages_and_run_tests_unittest.py
  39. update_tryjob_status.py
  40. update_tryjob_status_unittest.py
  41. upload_lexan_crashes_to_forcey.py
  42. upload_lexan_crashes_to_forcey_test.py
llvm_tools/README.md

LLVM Tools

Overview

These scripts helps automate tasks such as updating the LLVM next hash, determing whether a new patch applies correctly, and patch management.

In addition, there are scripts that automate the process of retrieving the git hash of LLVM from either google3, top of trunk, or for a specific SVN version.

NOTE: All scripts must must be run outside the chroot

NOTE: sudo must be permissive (i.e. cros_sdk should NOT prompt for a password)

update_packages_and_run_tests.py

Usage

This script is used for updating a package's LLVM hash (sys-devel/llvm, sys-libs/compiler-rt, sys-libs/libcxx, sys-libs/libcxxabi, and sys-libs/llvm-libunwind) and then run tests after updating the git hash. There are three ways to test the change, including starting tryjobs, recipe builders or using cq+1.

An example when this script should be run is when certain boards would like to be tested with the updated LLVM_NEXT_HASH.

For example:

$ ./update_packages_and_run_tests.py \
  --is_llvm_next \
  --llvm_version tot \
  tryjobs \
  --options nochromesdk latest-toolchain \
  --builders kevin-release-tryjob nocturne-release-tryjob

The above example would update the packages' LLVM_NEXT_HASH to the top of trunk's git hash and would submit tryjobs for kevin and nocturne boards, passing in ‘nochromesdk’ and ‘latest-toolchain’ for each tryjob.

For help with the command line arguments of the script, run:

$ ./update_packages_and_run_tests.py --help

Similarly as the previous example, but for updating LLVM_HASH to google3 and test with cq+1:

$ ./update_packages_and_run_tests.py \
  --llvm_version google3 \
  cq

Similarly as the previous example, but for updating LLVM_NEXT_HASH to the git hash of revision 367622 and test with recipe builders:

$ ./update_packages_and_run_tests.py \
  --is_llvm_next \
  --llvm_version 367622 \
  recipe \
  --options -nocanary \
  --builders chromeos/toolchain/kevin-llvm chromeos/toolchain/nocturne-llvm

update_chromeos_llvm_hash.py

Usage

This script is used for updating a package‘s/packages’ LLVM hashes and creating a change list of those changes which will uploaded for review. For example, some changes that would be included in the change list are the updated ebuilds, changes made to the patches of the updated packages such as being removed or an updated patch metadata file. These changes are determined by the --failure_mode option.

An example where this script would be used is when multiple packages need to have their LLVM_NEXT_HASH updated.

For example:

$ ./update_chromeos_llvm_hash.py \
  --update_packages sys-devel/llvm sys-libs/compiler-rt \
  --is_llvm_next \
  --llvm_version google3 \
  --failure_mode disable_patches

The example above would update sys-devel/llvm and sys-libs/compiler-rt‘s LLVM_NEXT_HASH to the latest google3’s git hash of LLVM. And the change list may include patches that were disabled for either sys-devel/llvm or sys-libs/compiler-rt.

For help with the command line arguments of the script, run:

$ ./update_chromeos_llvm_hash.py --help

For example, to update LLVM_HASH to top of trunk of LLVM:

$ ./update_chromeos_llvm_hash.py \
  --update_packages sys-devel/llvm sys-libs/compiler-rt \
  --llvm_version tot \
  --failure_mode disable_patches

For example, to create a roll CL to the git hash of revision 367622:

$ ./update_chromeos_llvm_hash.py \
  --update_packages sys-devel/llvm sys-libs/compiler-rt \
  sys-libs/libcxx sys-libs/libcxxabi sys-libs/llvm-libunwind \
  --llvm_version 367622 \
  --failure_mode disable_patches

llvm_patch_management.py

Usage

This script is used to test whether a newly added patch in a package's patch metadata file would apply successfully. The script is also used to make sure the patches of a package applied successfully, failed, etc., depending on the failure mode specified.

An example of using this script is when multiple packages would like to be tested when a new patch was added to their patch metadata file.

For example:

$ ./llvm_patch_management.py \
  --packages sys-devel/llvm sys-libs/compiler-rt \
  --failure_mode continue

The above example tests sys-devel/llvm and sys-libs/compiler-rt patch metadata file with the failure mode continue.

For help with the command line arguments of the script, run:

$ ./llvm_patch_management.py --help

patch_manager.py

Usage

This script is used when when all the command line arguments are known such as testing a specific metadata file or a specific source tree.

For help with the command line arguments of the script, run:

$ ./patch_manager.py --help

For example, to see all the failed (if any) patches:

$ ./patch_manager.py \
  --svn_version 367622 \
  --patch_metadata_file /abs/path/to/patch/file \
  --filesdir_path /abs/path/to/$FILESDIR \
  --src_path /abs/path/to/src/tree \
  --failure_mode continue

For example, to disable all patches that failed to apply:

$ ./patch_manager.py \
  --svn_version 367622 \
  --patch_metadata_file /abs/path/to/patch/file \
  --filesdir_path /abs/path/to/$FILESDIR \
  --src_path /abs/path/to/src/tree \
  --failure_mode disable_patches

For example, to remove all patches that no longer apply:

$ ./patch_manager.py \
  --svn_version 367622 \
  --patch_metadata_file /abs/path/to/patch/file \
  --filesdir_path /abs/path/to/$FILESDIR \
  --src_path /abs/path/to/src/tree \
  --failure_mode remove_patches

For example, to bisect a failing patch and stop at the first bisected patch:

$ ./patch_manager.py \
  --svn_version 367622 \
  --patch_metadata_file /abs/path/to/patch/file \
  --filesdir_path /abs/path/to/$FILESDIR \
  --src_path /abs/path/to/src/tree \
  --failure_mode bisect_patches \
  --good_svn_version 365631

For example, to bisect a failing patch and then continue bisecting the rest of the failed patches:

$ ./patch_manager.py \
  --svn_version 367622 \
  --patch_metadata_file /abs/path/to/patch/file \
  --filesdir_path /abs/path/to/$FILESDIR \
  --src_path /abs/path/to/src/tree \
  --failure_mode bisect_patches \
  --good_svn_version 365631 \
  --continue_bisection True

LLVM Bisection

llvm_bisection.py

Usage

This script is used to bisect a bad revision of LLVM. After the script finishes, the user requires to run the script again to continue the bisection. Intially, the script creates a JSON file that does not exist which then continues bisection (after invoking the script again) based off of the JSON file.

For example, assuming the revision 369420 is the bad revision:

$ ./llvm_bisection.py \
  --parallel 3 \
  --start_rev 369410 \
  --end_rev 369420 \
  --last_tested /abs/path/to/tryjob/file/ \
  --extra_change_lists 513590 \
  --builder eve-release-tryjob \
  --options latest-toolchain

The above example bisects the bad revision (369420), starting from the good revision 369410 and launching 3 tryjobs in between if possible (--parallel). Here, the --last_tested path is a path to a JSON file that does not exist. The tryjobs are tested on the eve board. --extra_change_lists and --options indicate what parameters to pass into launching a tryjob.

For help with the command line arguments of the script, run:

$ ./llvm_bisection.py --help

auto_llvm_bisection.py

Usage

This script automates the LLVM bisection process by using cros buildresult to update the status of each tryjob.

An example when this script would be used to do LLVM bisection overnight because tryjobs take very long to finish.

For example, assuming the good revision is 369410 and the bad revision is 369420, then:

$ ./auto_llvm_bisection.py --start_rev 369410 --end_rev 369420 \
  --last_tested /abs/path/to/last_tested_file.json \
  --extra_change_lists 513590 1394249 \
  --options latest-toolchain nochromesdk \
  --chroot_path /path/to/chromeos/chroot \
  --builder eve-release-tryjob

The example above bisects LLVM between revision 369410 and 369420. If the file exists, the script resumes bisection. Otherwise, the script creates the file provided by --last_tested. --extra_change_lists and --options are used for each tryjob when being submitted. Lastly, the tryjobs are launched for the board provided by --builder (in this example, for the eve board).

For help with the command line arguments of the script, run:

$ ./auto_llvm_bisection.py --help

update_tryjob_status.py

Usage

This script updates a tryjob's ‘status’ value when bisecting LLVM. This script can use the file that was created by llvm_bisection.py.

An example when this script would be used is when the result of tryjob that was launched was ‘fail’ (due to flaky infra) but it should really have been ‘success’.

For example, to update a tryjob's ‘status’ to ‘good’:

$ ./update_tryjob_status.py \
  --set_status good \
  --revision 369412 \
  --status_file /abs/path/to/tryjob/file

The above example uses the file in --status_file to update a tryjob in that file that tested the revision 369412 and sets its ‘status’ value to ‘good’.

For help with the command line arguments of the script, run:

$ ./update_tryjob_status.py --help

For example, to update a tryjob's ‘status’ to ‘bad’:

$ ./update_tryjob_status.py \
  --set_status bad \
  --revision 369412 \
  --status_file /abs/path/to/tryjob/file

For example, to update a tryjob's ‘status’ to ‘pending’:

$ ./update_tryjob_status.py \
  --set_status pending \
  --revision 369412 \
  --status_file /abs/path/to/tryjob/file

For example, to update a tryjob's ‘status’ to ‘skip’:

$ ./update_tryjob_status.py \
  --set_status skip \
  --revision 369412 \
  --status_file /abs/path/to/tryjob/file

For example, to update a tryjob's ‘status’ based off a custom script exit code:

$ ./update_tryjob_status.py \
  --set_status custom_script \
  --revision 369412 \
  --status_file /abs/path/to/tryjob/file \
  --custom_script /abs/path/to/script.py

update_all_tryjobs_with_auto.py

Usage

This script updates all tryjobs that are ‘pending’ to the result provided by cros buildresult.

For example:

$ ./update_all_tryjobs_with_auto.py \
  --last_tested /abs/path/to/last_tested_file.json \
  --chroot_path /abs/path/to/chroot

The above example will update all tryjobs whose ‘status’ is ‘pending’ in the file provided by --last_tested.

For help with the command line arguments of the script, run:

$ ./update_all_tryjobs_with_auto.py --help

modify_a_tryjob.py

Usage

This script modifies a tryjob directly given an already created tryjob file when bisecting LLVM. The file created by llvm_bisection.py can be used in this script.

An example when this script would be used is when a tryjob needs to be manually added.

For example:

$ ./modify_a_tryjob.py \
  --modify_a_tryjob add \
  --revision 369416 \
  --extra_change_lists 513590 \
  --options latest-toolchain \
  --builder eve-release-tryjob \
  --status_file /abs/path/to/tryjob/file

The above example creates a tryjob that tests revision 369416 on the eve board, passing in the extra arguments (--extra_change_lists and --options). The tryjob is then inserted into the file passed in via --status_file.

For help with the command line arguments of the script, run:

$ ./modify_a_tryjob.py --help

For example, to remove a tryjob that tested revision 369412:

$ ./modify_a_tryjob.py \
  --modify_a_tryjob remove \
  --revision 369412 \
  --status_file /abs/path/to/tryjob/file

For example, to relaunch a tryjob that tested revision 369418:

$ ./modify_a_tryjob.py \
  --modify_a_tryjob relaunch \
  --revision 369418 \
  --status_file /abs/path/to/tryjob/file

Other Helpful Scripts

get_llvm_hash.py

Usage

The script has a class that deals with retrieving either the top of trunk git hash of LLVM, the git hash of google3, or a specific git hash of a SVN version. It also has other functions when dealing with a git hash of LLVM.

In addition, it has a function to retrieve the latest google3 LLVM version.

For example, to retrieve the top of trunk git hash of LLVM:

from get_llvm_hash import LLVMHash

LLVMHash().GetTopOfTrunkGitHash()

For example, to retrieve the git hash of google3:

from get_llvm_hash import LLVMHash

LLVMHash().GetGoogle3LLVMHash()

For example, to retrieve the git hash of a specific SVN version:

from get_llvm_hash import LLVMHash

LLVMHash().GetLLVMHash(<svn_version>)

For example, to retrieve the latest google3 LLVM version:

from get_llvm_hash import GetGoogle3LLVMVersion

GetGoogle3LLVMVersion(stable=True)

git_llvm_rev.py

This script is meant to synthesize LLVM revision numbers, and translate between these synthesized numbers and git SHAs. Usage should be straightforward:

~> ./git_llvm_rev.py --llvm_dir llvm-project-copy/ --rev r380000
6f635f90929da9545dd696071a829a1a42f84b30
~> ./git_llvm_rev.py --llvm_dir llvm-project-copy/ --sha 6f635f90929da9545dd696071a829a1a42f84b30
r380000
~> ./git_llvm_rev.py --llvm_dir llvm-project-copy/ --sha origin/some-branch
r387778

Tip: if you put a symlink called git-llvm-rev to this script somewhere on your $PATH, you can also use it as git llvm-rev.

cherrypick_cl.py

Usage

This script updates the proper ChromeOS packages with an LLVM cherrypick of your choosing, and copies the cherrypick into patch folders of the packages.

Usage:

./cherrypick_cl.py --chroot_path /abs/path/to/chroot --start_sha llvm
--sha 174c3eb69f19ff2d6a3eeae31d04afe77e62c021 --sha 174c3eb69f19ff2d6a3eeae31d04afe77e62c021

It tries to autodetect a lot of things (e.g., packages changed by each sha, their ebuild paths, the “start”/“end” revisions to set, etc.) By default the script creates a local patch. Use --create_cl option to create a CL instead. For more information, please see the --help

revert_checker.py

This script reports reverts which happen ‘across’ a certain LLVM commit.

To clarify the meaning of ‘across’ with an example, if we had the following commit history (where a -> b notes that b is a direct child of a):

123abc -> 223abc -> 323abc -> 423abc -> 523abc

And where 423abc is a revert of 223abc, this revert is considered to be ‘across’ 323abc. More generally, a revert A of a parent commit B is considered to be ‘across’ a commit C if C is a parent of A and B is a parent of C.

Usage example:

./revert_checker.py -C llvm-project-copy 123abc 223abc 323abc

In the above example, the tool will scan all commits between 123abc and 223abc, and all commits between 123abc and 323abc for reverts of commits which are parents of 123abc.

nightly_revert_checker.py

This is an automated wrapper around revert_checker.py. It checks to see if any new reverts happened across toolchains that we're trying to ship since it was last run. If so, it sends emails to appropriate groups.

Usage example:

PYTHONPATH=../ ./nightly_revert_checker.py \
  --state_file state.json \
  --llvm_dir llvm-project-copy \
  --chromeos_dir ../../../../

bisect_clang_crashes.py

This script downloads clang crash diagnoses from gs://chromeos-toolchain-artifacts/clang-crash-diagnoses and sends them to 4c for bisection.

Usage example:

$ ./bisect_clang_crashes.py --4c 4c-cli --state_file ./output/state.json

The above command downloads the artifacts of clang crash diagnoses and send them to 4c server for bisection. The summary of submitted jobs will be saved in output/state.json under the current path. The output directory will be created automatically if it does not exist yet. To get more information of the submitted jobs, please refer to go/4c-cli.

upload_lexan_crashes_to_forcey.py

This script downloads clang crash diagnoses from Lexan's bucket and sends them to 4c for bisection.

Usage example:

$ ./upload_lexan_crashes_to_forcey.py --4c 4c-cli \
    --state_file ./output/state.json

The above command downloads the artifacts of clang crash diagnoses and send them to 4c server for bisection. The summary of submitted jobs will be saved in output/state.json under the current path. The output directory will be created automatically if it does not exist yet. To get more information of the submitted jobs, please refer to go/4c-cli.

Note that it‘s recommended to ‘seed’ the state file with a most recent upload date. This can be done by running this tool once with a --last_date flag. This flag has the script override whatever’s in the state file (if anything) and start submitting all crashes uploaded starting at the given day.