#-------------------------------------------------------------------------------
# elftools: dwarf/callframe.py
#
# DWARF call frame information
#
# Eli Bendersky (eliben@gmail.com)
# This code is in the public domain
#-------------------------------------------------------------------------------
import copy
from collections import namedtuple
from ..common.utils import (struct_parse, dwarf_assert, preserve_stream_pos)
from ..common.py3compat import iterbytes, iterkeys
from ..construct import Struct, Switch
from .enums import DW_EH_encoding_flags
from .structs import DWARFStructs
from .constants import *


class CallFrameInfo(object):
    """ DWARF CFI (Call Frame Info)

    Note that this also supports unwinding information as found in .eh_frame
    sections: its format differs slightly from the one in .debug_frame. See
    <http://www.airs.com/blog/archives/460>.

        stream, size:
            A stream holding the .debug_frame section, and the size of the
            section in it.

        address:
            Virtual address for this section. This is used to decode relative
            addresses.

        base_structs:
            The structs to be used as the base for parsing this section.
            Eventually, each entry gets its own structs based on the initial
            length field it starts with. The address_size, however, is taken
            from base_structs. This appears to be a limitation of the DWARFv3
            standard, fixed in v4.
            A discussion I had on dwarf-discuss confirms this.
            So for DWARFv4 we'll take the address size from the CIE header,
            but for earlier versions will use the elfclass of the containing
            file; more sophisticated methods are used by libdwarf and others,
            such as guessing which CU contains which FDEs (based on their
            address ranges) and taking the address_size from those CUs.
    """
    def __init__(self, stream, size, address, base_structs,
                 for_eh_frame=False):
        self.stream = stream
        self.size = size
        self.address = address
        self.base_structs = base_structs
        self.entries = None

        # Map between an offset in the stream and the entry object found at this
        # offset. Useful for assigning CIE to FDEs according to the CIE_pointer
        # header field which contains a stream offset.
        self._entry_cache = {}

        # The .eh_frame and .debug_frame section use almost the same CFI
        # encoding, but there are tiny variations we need to handle during
        # parsing.
        self.for_eh_frame = for_eh_frame

    def get_entries(self):
        """ Get a list of entries that constitute this CFI. The list consists
            of CIE or FDE objects, in the order of their appearance in the
            section.
        """
        if self.entries is None:
            self.entries = self._parse_entries()
        return self.entries

    #-------------------------

    def _parse_entries(self):
        entries = []
        offset = 0
        while offset < self.size:
            entries.append(self._parse_entry_at(offset))
            offset = self.stream.tell()
        return entries

    def _parse_entry_at(self, offset):
        """ Parse an entry from self.stream starting with the given offset.
            Return the entry object. self.stream will point right after the
            entry.
        """
        if offset in self._entry_cache:
            return self._entry_cache[offset]

        entry_length = struct_parse(
            self.base_structs.Dwarf_uint32(''), self.stream, offset)

        if self.for_eh_frame and entry_length == 0:
            return ZERO(offset)

        dwarf_format = 64 if entry_length == 0xFFFFFFFF else 32

        entry_structs = DWARFStructs(
            little_endian=self.base_structs.little_endian,
            dwarf_format=dwarf_format,
            address_size=self.base_structs.address_size)

        # Read the next field to see whether this is a CIE or FDE
        CIE_id = struct_parse(
            entry_structs.Dwarf_offset(''), self.stream)

        if self.for_eh_frame:
            is_CIE = CIE_id == 0
        else:
            is_CIE = (
                (dwarf_format == 32 and CIE_id == 0xFFFFFFFF) or
                CIE_id == 0xFFFFFFFFFFFFFFFF)

        # Parse the header, which goes up to and excluding the sequence of
        # instructions.
        if is_CIE:
            header_struct = (entry_structs.EH_CIE_header
                             if self.for_eh_frame else
                             entry_structs.Dwarf_CIE_header)
            header = struct_parse(
                header_struct, self.stream, offset)
        else:
            header = self._parse_fde_header(entry_structs, offset)


        # If this is DWARF version 4 or later, we can have a more precise
        # address size, read from the CIE header.
        if not self.for_eh_frame and entry_structs.dwarf_version >= 4:
            entry_structs = DWARFStructs(
                little_endian=entry_structs.little_endian,
                dwarf_format=entry_structs.dwarf_format,
                address_size=header.address_size)

        # If the augmentation string is not empty, hope to find a length field
        # in order to skip the data specified augmentation.
        if is_CIE:
            aug_bytes, aug_dict = self._parse_cie_augmentation(
                    header, entry_structs)
        else:
            cie = self._parse_cie_for_fde(offset, header, entry_structs)
            aug_bytes = self._read_augmentation_data(entry_structs)

        # For convenience, compute the end offset for this entry
        end_offset = (
            offset + header.length +
            entry_structs.initial_length_field_size())

        # At this point self.stream is at the start of the instruction list
        # for this entry
        instructions = self._parse_instructions(
            entry_structs, self.stream.tell(), end_offset)

        if is_CIE:
            self._entry_cache[offset] = CIE(
                header=header, instructions=instructions, offset=offset,
                augmentation_dict=aug_dict,
                augmentation_bytes=aug_bytes,
                structs=entry_structs)

        else: # FDE
            cie = self._parse_cie_for_fde(offset, header, entry_structs)
            self._entry_cache[offset] = FDE(
                header=header, instructions=instructions, offset=offset,
                augmentation_bytes=aug_bytes,
                structs=entry_structs, cie=cie)
        return self._entry_cache[offset]

    def _parse_instructions(self, structs, offset, end_offset):
        """ Parse a list of CFI instructions from self.stream, starting with
            the offset and until (not including) end_offset.
            Return a list of CallFrameInstruction objects.
        """
        instructions = []
        while offset < end_offset:
            opcode = struct_parse(structs.Dwarf_uint8(''), self.stream, offset)
            args = []

            primary = opcode & _PRIMARY_MASK
            primary_arg = opcode & _PRIMARY_ARG_MASK
            if primary == DW_CFA_advance_loc:
                args = [primary_arg]
            elif primary == DW_CFA_offset:
                args = [
                    primary_arg,
                    struct_parse(structs.Dwarf_uleb128(''), self.stream)]
            elif primary == DW_CFA_restore:
                args = [primary_arg]
            # primary == 0 and real opcode is extended
            elif opcode in (DW_CFA_nop, DW_CFA_remember_state,
                            DW_CFA_restore_state):
                args = []
            elif opcode == DW_CFA_set_loc:
                args = [
                    struct_parse(structs.Dwarf_target_addr(''), self.stream)]
            elif opcode == DW_CFA_advance_loc1:
                args = [struct_parse(structs.Dwarf_uint8(''), self.stream)]
            elif opcode == DW_CFA_advance_loc2:
                args = [struct_parse(structs.Dwarf_uint16(''), self.stream)]
            elif opcode == DW_CFA_advance_loc4:
                args = [struct_parse(structs.Dwarf_uint32(''), self.stream)]
            elif opcode in (DW_CFA_offset_extended, DW_CFA_register,
                            DW_CFA_def_cfa, DW_CFA_val_offset):
                args = [
                    struct_parse(structs.Dwarf_uleb128(''), self.stream),
                    struct_parse(structs.Dwarf_uleb128(''), self.stream)]
            elif opcode in (DW_CFA_restore_extended, DW_CFA_undefined,
                            DW_CFA_same_value, DW_CFA_def_cfa_register,
                            DW_CFA_def_cfa_offset):
                args = [struct_parse(structs.Dwarf_uleb128(''), self.stream)]
            elif opcode == DW_CFA_def_cfa_offset_sf:
                args = [struct_parse(structs.Dwarf_sleb128(''), self.stream)]
            elif opcode == DW_CFA_def_cfa_expression:
                args = [struct_parse(
                    structs.Dwarf_dw_form['DW_FORM_block'], self.stream)]
            elif opcode in (DW_CFA_expression, DW_CFA_val_expression):
                args = [
                    struct_parse(structs.Dwarf_uleb128(''), self.stream),
                    struct_parse(
                        structs.Dwarf_dw_form['DW_FORM_block'], self.stream)]
            elif opcode in (DW_CFA_offset_extended_sf,
                            DW_CFA_def_cfa_sf, DW_CFA_val_offset_sf):
                args = [
                    struct_parse(structs.Dwarf_uleb128(''), self.stream),
                    struct_parse(structs.Dwarf_sleb128(''), self.stream)]
            else:
                dwarf_assert(False, 'Unknown CFI opcode: 0x%x' % opcode)

            instructions.append(CallFrameInstruction(opcode=opcode, args=args))
            offset = self.stream.tell()
        return instructions

    def _parse_cie_for_fde(self, fde_offset, fde_header, entry_structs):
        """ Parse the CIE that corresponds to an FDE.
        """
        # Determine the offset of the CIE that corresponds to this FDE
        if self.for_eh_frame:
            # CIE_pointer contains the offset for a reverse displacement from
            # the section offset of the CIE_pointer field itself (not from the
            # FDE header offset).
            cie_displacement = fde_header['CIE_pointer']
            cie_offset = (fde_offset + entry_structs.dwarf_format // 8
                          - cie_displacement)
        else:
            cie_offset = fde_header['CIE_pointer']

        # Then read it
        with preserve_stream_pos(self.stream):
            return self._parse_entry_at(cie_offset)

    def _parse_cie_augmentation(self, header, entry_structs):
        """ Parse CIE augmentation data from the annotation string in `header`.

        Return a tuple that contains 1) the augmentation data as a string
        (without the length field) and 2) the augmentation data as a dict.
        """
        augmentation = header.get('augmentation')
        if not augmentation:
            return ('', {})

        # Augmentation parsing works in minimal mode here: we need the length
        # field to be able to skip unhandled augmentation fields.
        assert augmentation.startswith(b'z'), (
            'Unhandled augmentation string: {}'.format(repr(augmentation)))

        available_fields = {
            b'z': entry_structs.Dwarf_uleb128('length'),
            b'L': entry_structs.Dwarf_uint8('LSDA_encoding'),
            b'R': entry_structs.Dwarf_uint8('FDE_encoding'),
            b'S': True,
            b'P': Struct(
                'personality',
                entry_structs.Dwarf_uint8('encoding'),
                Switch('function', lambda ctx: ctx.encoding & 0x0f, {
                    enc: fld_cons('function')
                    for enc, fld_cons
                    in self._eh_encoding_to_field(entry_structs).items()})),
        }

        # Build the Struct we will be using to parse the augmentation data.
        # Stop as soon as we are not able to match the augmentation string.
        fields = []
        aug_dict = {}

        for b in iterbytes(augmentation):
            try:
                fld = available_fields[b]
            except KeyError:
                break

            if fld is True:
                aug_dict[fld] = True
            else:
                fields.append(fld)

        # Read the augmentation twice: once with the Struct, once for the raw
        # bytes. Read the raw bytes last so we are sure we leave the stream
        # pointing right after the augmentation: the Struct may be incomplete
        # (missing trailing fields) due to an unknown char: see the KeyError
        # above.
        offset = self.stream.tell()
        struct = Struct('Augmentation_Data', *fields)
        aug_dict.update(struct_parse(struct, self.stream, offset))
        self.stream.seek(offset)
        aug_bytes = self._read_augmentation_data(entry_structs)
        return (aug_bytes, aug_dict)

    def _read_augmentation_data(self, entry_structs):
        """ Read augmentation data.

        This assumes that the augmentation string starts with 'z', i.e. that
        augmentation data is prefixed by a length field, which is not returned.
        """
        if not self.for_eh_frame:
            return b''

        augmentation_data_length = struct_parse(
            Struct('Dummy_Augmentation_Data',
                   entry_structs.Dwarf_uleb128('length')),
            self.stream)['length']
        return self.stream.read(augmentation_data_length)

    def _parse_fde_header(self, entry_structs, offset):
        """ Compute a struct to parse the header of the current FDE.
        """
        if not self.for_eh_frame:
            return struct_parse(entry_structs.Dwarf_FDE_header, self.stream,
                                offset)

        fields = [entry_structs.Dwarf_initial_length('length'),
                  entry_structs.Dwarf_offset('CIE_pointer')]

        # Parse the couple of header fields that are always here so we can
        # fetch the corresponding CIE.
        minimal_header = struct_parse(Struct('eh_frame_minimal_header',
                                             *fields), self.stream, offset)
        cie = self._parse_cie_for_fde(offset, minimal_header, entry_structs)
        initial_location_offset = self.stream.tell()

        # Try to parse the initial location. We need the initial location in
        # order to create a meaningful FDE, so assume it's there. Omission does
        # not seem to happen in practice.
        encoding = cie.augmentation_dict['FDE_encoding']
        assert encoding != DW_EH_encoding_flags['DW_EH_PE_omit']
        basic_encoding = encoding & 0x0f
        encoding_modifier = encoding & 0xf0

        # Depending on the specified encoding, complete the header Struct
        formats = self._eh_encoding_to_field(entry_structs)
        fields.append(formats[basic_encoding]('initial_location'))
        fields.append(formats[basic_encoding]('address_range'))

        result = struct_parse(Struct('Dwarf_FDE_header', *fields),
                              self.stream, offset)

        if encoding_modifier == 0:
            pass

        elif encoding_modifier == DW_EH_encoding_flags['DW_EH_PE_pcrel']:
            # Start address is relative to the address of the
            # "initial_location" field.
            result['initial_location'] += (
                self.address + initial_location_offset)
        else:
            assert False, 'Unsupported encoding: {:#x}'.format(encoding)

        return result

    def _eh_encoding_to_field(self, entry_structs):
        """
        Return a mapping from basic encodings (DW_EH_encoding_flags) the
        corresponding field constructors (for instance
        entry_structs.Dwarf_uint32).
        """
        return {
            DW_EH_encoding_flags['DW_EH_PE_absptr']:
                entry_structs.Dwarf_uint32
                if entry_structs.dwarf_format == 32 else
                entry_structs.Dwarf_uint64,
            DW_EH_encoding_flags['DW_EH_PE_uleb128']:
                entry_structs.Dwarf_uleb128,
            DW_EH_encoding_flags['DW_EH_PE_udata2']:
                entry_structs.Dwarf_uint16,
            DW_EH_encoding_flags['DW_EH_PE_udata4']:
                entry_structs.Dwarf_uint32,
            DW_EH_encoding_flags['DW_EH_PE_udata8']:
                entry_structs.Dwarf_uint64,

            DW_EH_encoding_flags['DW_EH_PE_sleb128']:
                entry_structs.Dwarf_sleb128,
            DW_EH_encoding_flags['DW_EH_PE_sdata2']:
                entry_structs.Dwarf_int16,
            DW_EH_encoding_flags['DW_EH_PE_sdata4']:
                entry_structs.Dwarf_int32,
            DW_EH_encoding_flags['DW_EH_PE_sdata8']:
                entry_structs.Dwarf_int64,
        }


def instruction_name(opcode):
    """ Given an opcode, return the instruction name.
    """
    primary = opcode & _PRIMARY_MASK
    if primary == 0:
        return _OPCODE_NAME_MAP[opcode]
    else:
        return _OPCODE_NAME_MAP[primary]


class CallFrameInstruction(object):
    """ An instruction in the CFI section. opcode is the instruction
        opcode, numeric - as it appears in the section. args is a list of
        arguments (including arguments embedded in the low bits of some
        instructions, when applicable), decoded from the stream.
    """
    def __init__(self, opcode, args):
        self.opcode = opcode
        self.args = args

    def __repr__(self):
        return '%s (0x%x): %s' % (
            instruction_name(self.opcode), self.opcode, self.args)


class CFIEntry(object):
    """ A common base class for CFI entries.
        Contains a header and a list of instructions (CallFrameInstruction).
        offset: the offset of this entry from the beginning of the section
        cie: for FDEs, a CIE pointer is required
        augmentation_dict: Augmentation data as a parsed struct (dict): see
            CallFrameInfo._parse_cie_augmentation and
            http://www.airs.com/blog/archives/460.
        augmentation_bytes: Augmentation data as a chain of bytes: see
            CallFrameInfo._parse_cie_augmentation and
            http://www.airs.com/blog/archives/460.
    """
    def __init__(self, header, structs, instructions, offset,
            augmentation_dict={}, augmentation_bytes=b'', cie=None):
        self.header = header
        self.structs = structs
        self.instructions = instructions
        self.offset = offset
        self.cie = cie
        self._decoded_table = None
        self.augmentation_dict = augmentation_dict
        self.augmentation_bytes = augmentation_bytes

    def get_decoded(self):
        """ Decode the CFI contained in this entry and return a
            DecodedCallFrameTable object representing it. See the documentation
            of that class to understand how to interpret the decoded table.
        """
        if self._decoded_table is None:
            self._decoded_table = self._decode_CFI_table()
        return self._decoded_table

    def __getitem__(self, name):
        """ Implement dict-like access to header entries
        """
        return self.header[name]

    def _decode_CFI_table(self):
        """ Decode the instructions contained in the given CFI entry and return
            a DecodedCallFrameTable.
        """
        if isinstance(self, CIE):
            # For a CIE, initialize cur_line to an "empty" line
            cie = self
            cur_line = dict(pc=0, cfa=CFARule(reg=None, offset=0))
            reg_order = []
        else: # FDE
            # For a FDE, we need to decode the attached CIE first, because its
            # decoded table is needed. Its "initial instructions" describe a
            # line that serves as the base (first) line in the FDE's table.
            cie = self.cie
            cie_decoded_table = cie.get_decoded()
            if len(cie_decoded_table.table) > 0:
                last_line_in_CIE = copy.copy(cie_decoded_table.table[-1])
                cur_line = copy.copy(last_line_in_CIE)
            else:
                cur_line = dict(cfa=CFARule(reg=None, offset=0))
            cur_line['pc'] = self['initial_location']
            reg_order = copy.copy(cie_decoded_table.reg_order)

        table = []

        # Keeps a stack for the use of DW_CFA_{remember|restore}_state
        # instructions.
        line_stack = []

        def _add_to_order(regnum):
            if regnum not in cur_line:
                reg_order.append(regnum)

        for instr in self.instructions:
            # Throughout this loop, cur_line is the current line. Some
            # instructions add it to the table, but most instructions just
            # update it without adding it to the table.

            name = instruction_name(instr.opcode)

            if name == 'DW_CFA_set_loc':
                table.append(copy.copy(cur_line))
                cur_line['pc'] = instr.args[0]
            elif name in (  'DW_CFA_advance_loc1', 'DW_CFA_advance_loc2',
                            'DW_CFA_advance_loc4', 'DW_CFA_advance_loc'):
                table.append(copy.copy(cur_line))
                cur_line['pc'] += instr.args[0] * cie['code_alignment_factor']
            elif name == 'DW_CFA_def_cfa':
                cur_line['cfa'] = CFARule(
                    reg=instr.args[0],
                    offset=instr.args[1])
            elif name == 'DW_CFA_def_cfa_sf':
                cur_line['cfa'] = CFARule(
                    reg=instr.args[0],
                    offset=instr.args[1] * cie['code_alignment_factor'])
            elif name == 'DW_CFA_def_cfa_register':
                cur_line['cfa'] = CFARule(
                    reg=instr.args[0],
                    offset=cur_line['cfa'].offset)
            elif name == 'DW_CFA_def_cfa_offset':
                cur_line['cfa'] = CFARule(
                    reg=cur_line['cfa'].reg,
                    offset=instr.args[0])
            elif name == 'DW_CFA_def_cfa_expression':
                cur_line['cfa'] = CFARule(expr=instr.args[0])
            elif name == 'DW_CFA_undefined':
                _add_to_order(instr.args[0])
                cur_line[instr.args[0]] = RegisterRule(RegisterRule.UNDEFINED)
            elif name == 'DW_CFA_same_value':
                _add_to_order(instr.args[0])
                cur_line[instr.args[0]] = RegisterRule(RegisterRule.SAME_VALUE)
            elif name in (  'DW_CFA_offset', 'DW_CFA_offset_extended',
                            'DW_CFA_offset_extended_sf'):
                _add_to_order(instr.args[0])
                cur_line[instr.args[0]] = RegisterRule(
                    RegisterRule.OFFSET,
                    instr.args[1] * cie['data_alignment_factor'])
            elif name in ('DW_CFA_val_offset', 'DW_CFA_val_offset_sf'):
                _add_to_order(instr.args[0])
                cur_line[instr.args[0]] = RegisterRule(
                    RegisterRule.VAL_OFFSET,
                    instr.args[1] * cie['data_alignment_factor'])
            elif name == 'DW_CFA_register':
                _add_to_order(instr.args[0])
                cur_line[instr.args[0]] = RegisterRule(
                    RegisterRule.REGISTER,
                    instr.args[1])
            elif name == 'DW_CFA_expression':
                _add_to_order(instr.args[0])
                cur_line[instr.args[0]] = RegisterRule(
                    RegisterRule.EXPRESSION,
                    instr.args[1])
            elif name == 'DW_CFA_val_expression':
                _add_to_order(instr.args[0])
                cur_line[instr.args[0]] = RegisterRule(
                    RegisterRule.VAL_EXPRESSION,
                    instr.args[1])
            elif name in ('DW_CFA_restore', 'DW_CFA_restore_extended'):
                _add_to_order(instr.args[0])
                dwarf_assert(
                    isinstance(self, FDE),
                    '%s instruction must be in a FDE' % name)
                if instr.args[0] in last_line_in_CIE:
                    cur_line[instr.args[0]] = last_line_in_CIE[instr.args[0]]
                else:
                    cur_line.pop(instr.args[0], None)
            elif name == 'DW_CFA_remember_state':
                line_stack.append(copy.deepcopy(cur_line))
            elif name == 'DW_CFA_restore_state':
                pc = cur_line['pc']
                cur_line = line_stack.pop()
                cur_line['pc'] = pc

        # The current line is appended to the table after all instructions
        # have ended, if there were instructions.
        if cur_line['cfa'].reg is not None or len(cur_line) > 2:
            table.append(cur_line)

        return DecodedCallFrameTable(table=table, reg_order=reg_order)


# A CIE and FDE have exactly the same functionality, except that a FDE has
# a pointer to its CIE. The functionality was wholly encapsulated in CFIEntry,
# so the CIE and FDE classes exists separately for identification (instead
# of having an explicit "entry_type" field in CFIEntry).
#
class CIE(CFIEntry):
    pass


class FDE(CFIEntry):
    pass


class ZERO(object):
    """ End marker for the sequence of CIE/FDE.

    This is specific to `.eh_frame` sections: this kind of entry does not exist
    in pure DWARF. `readelf` displays these as "ZERO terminator", hence the
    class name.
    """
    def __init__(self, offset):
        self.offset = offset


class RegisterRule(object):
    """ Register rules are used to find registers in call frames. Each rule
        consists of a type (enumeration following DWARFv3 section 6.4.1)
        and an optional argument to augment the type.
    """
    UNDEFINED = 'UNDEFINED'
    SAME_VALUE = 'SAME_VALUE'
    OFFSET = 'OFFSET'
    VAL_OFFSET = 'VAL_OFFSET'
    REGISTER = 'REGISTER'
    EXPRESSION = 'EXPRESSION'
    VAL_EXPRESSION = 'VAL_EXPRESSION'
    ARCHITECTURAL = 'ARCHITECTURAL'

    def __init__(self, type, arg=None):
        self.type = type
        self.arg = arg

    def __repr__(self):
        return 'RegisterRule(%s, %s)' % (self.type, self.arg)


class CFARule(object):
    """ A CFA rule is used to compute the CFA for each location. It either
        consists of a register+offset, or a DWARF expression.
    """
    def __init__(self, reg=None, offset=None, expr=None):
        self.reg = reg
        self.offset = offset
        self.expr = expr

    def __repr__(self):
        return 'CFARule(reg=%s, offset=%s, expr=%s)' % (
            self.reg, self.offset, self.expr)


# Represents the decoded CFI for an entry, which is just a large table,
# according to DWARFv3 section 6.4.1
#
# DecodedCallFrameTable is a simple named tuple to group together the table
# and the register appearance order.
#
# table:
#
# A list of dicts that represent "lines" in the decoded table. Each line has
# some special dict entries: 'pc' for the location/program counter (LOC),
# and 'cfa' for the CFARule to locate the CFA on that line.
# The other entries are keyed by register numbers with RegisterRule values,
# and describe the rules for these registers.
#
# reg_order:
#
# A list of register numbers that are described in the table by the order of
# their appearance.
#
DecodedCallFrameTable = namedtuple(
    'DecodedCallFrameTable', 'table reg_order')


#---------------- PRIVATE ----------------#

_PRIMARY_MASK = 0b11000000
_PRIMARY_ARG_MASK = 0b00111111

# This dictionary is filled by automatically scanning the constants module
# for DW_CFA_* instructions, and mapping their values to names. Since all
# names were imported from constants with `import *`, we look in globals()
_OPCODE_NAME_MAP = {}
for name in list(iterkeys(globals())):
    if name.startswith('DW_CFA'):
        _OPCODE_NAME_MAP[globals()[name]] = name