blob: 1a99231b7cd968f50382089db465b15d43009afb [file] [log] [blame]
#!/bin/bash
# Copyright 1999-2012 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# Author Brandon Low <lostlogic@gentoo.org>
# Mike Frysinger <vapier@gentoo.org>
#
# Previous version (from which I've borrowed a few bits) by:
# Jochem Kossen <j.kossen@home.nl>
# Leo Lipelis <aeoo@gentoo.org>
# Karl Trygve Kalleberg <karltk@gentoo.org>
cd /
type -P gsed >/dev/null && sed() { gsed "$@"; }
get_config() {
# the sed here does:
# - strip off comments
# - match lines that set item in question
# - delete the "item =" part
# - store the actual value into the hold space
# - on the last line, restore the hold space and print it
# If there's more than one of the same configuration item, then
# the store to the hold space clobbers previous value so the last
# setting takes precedence.
local match=$1
eval $(sed -n -r \
-e 's:[[:space:]]*#.*$::' \
-e "/^[[:space:]]*${match}[[:space:]]*=/{s:^([^=]*)=[[:space:]]*([\"']{0,1})(.*)\2:\1=\2\3\2:;H}" \
-e '${g;p}' \
"${PORTAGE_CONFIGROOT}"etc/etc-update.conf)
}
cmd_var_is_valid() {
# return true if the first whitespace-separated token contained
# in "${1}" is an executable file, false otherwise
[[ -x $(type -P ${1%%[[:space:]]*}) ]]
}
diff_command() {
local cmd=${diff_command//%file1/$1}
${cmd//%file2/$2}
}
# Usage: do_mv_ln [options] <src> <dst>
# Files have to be the last two args, and has to be
# files so we can handle symlinked target sanely.
do_mv_ln() {
local opts=( ${@:1:$(( $# - 2 ))} )
local src=${@:$(( $# - 1 )):1}
local dst=${@:$(( $# - 0 )):1}
if [[ -L ${dst} ]] ; then #330221
local lfile=$(readlink "${dst}")
[[ ${lfile} == /* ]] || lfile="${dst%/*}/${lfile}"
echo " Target is a symlink; replacing ${lfile}"
dst=${lfile}
fi
mv "${opts[@]}" "${src}" "${dst}"
}
scan() {
${QUIET} || echo "Scanning Configuration files..."
rm -rf "${TMP}"/files > /dev/null 2>&1
mkdir "${TMP}"/files || die "Failed mkdir command!"
count=0
input=0
local find_opts
local path
for path in ${SCAN_PATHS} ; do
path="${EROOT%/}${path}"
if [[ ! -d ${path} ]] ; then
[[ ! -f ${path} ]] && continue
local my_basename="${path##*/}"
path="${path%/*}"
find_opts=( -maxdepth 1 -name "._cfg????_${my_basename}" )
else
# Do not traverse hidden directories such as .svn or .git.
find_opts=( -name '.*' -type d -prune -o -name '._cfg????_*' )
fi
find_opts+=( ! -name '.*~' ! -iname '.*.bak' -print )
if [ ! -w "${path}" ] ; then
[ -e "${path}" ] || continue
die "Need write access to ${path}"
fi
local file ofile b=$'\001'
for file in $(find "${path}"/ "${find_opts[@]}" |
sed \
-e 's://*:/:g' \
-e "s:\(^.*/\)\(\._cfg[0-9]*_\)\(.*$\):\1\2\3$b\1$b\2$b\3:" |
sort -t"$b" -k2,2 -k4,4 -k3,3 |
LC_ALL=C cut -f1 -d"$b")
do
local rpath rfile cfg_file live_file
rpath=${file%/*}
rfile=${file##*/}
cfg_file="${rpath}/${rfile}"
live_file="${rpath}/${rfile:10}"
local mpath
for mpath in ${CONFIG_PROTECT_MASK}; do
mpath="${EROOT%/}${mpath}"
if [[ "${rpath}" == "${mpath}"* ]] ; then
${QUIET} || echo "Updating masked file: ${live_file}"
mv "${cfg_file}" "${live_file}"
continue 2
fi
done
if [[ ! -f ${file} ]] ; then
${QUIET} || echo "Skipping non-file ${file} ..."
continue
fi
if [[ "${ofile:10}" != "${rfile:10}" ]] ||
[[ ${opath} != ${rpath} ]]
then
MATCHES=0
if [[ ${eu_automerge} == "yes" ]] ; then
if [[ ! -e ${cfg_file} || ! -e ${live_file} ]] ; then
MATCHES=0
else
diff -Bbua "${cfg_file}" "${live_file}" | \
sed -n -r \
-e '/^[+-]/{/^([+-][\t ]*(#|$)|-{3} |\+{3} )/d;q1}'
: $(( MATCHES = ($? == 0) ))
fi
else
diff -Nbua "${cfg_file}" "${live_file}" |
sed -n \
-e '/# .Header:/d' \
-e '/^[+-][^+-]/q1'
: $(( MATCHES = ($? == 0) ))
fi
if [[ ${MATCHES} == 1 ]] ; then
${QUIET} || echo "Automerging trivial changes in: ${live_file}"
do_mv_ln "${cfg_file}" "${live_file}"
continue
else
: $(( ++count ))
echo "${live_file}" > "${TMP}"/files/${count}
echo "${cfg_file}" >> "${TMP}"/files/${count}
ofile="${rfile}"
opath="${rpath}"
continue
fi
fi
if ! diff -Nbua "${cfg_file}" "${rpath}/${ofile}" |
sed -n \
-e '/# .Header:/d' \
-e '/^[+-][^+-]/q1'
then
echo "${cfg_file}" >> "${TMP}"/files/${count}
ofile="${rfile}"
opath="${rpath}"
else
mv "${cfg_file}" "${rpath}/${ofile}"
continue
fi
done
done
}
parse_automode_flag() {
case $1 in
-9)
local reply
read -p "Are you sure that you want to delete all updates (type YES): " reply
if [[ ${reply} != "YES" ]] ; then
echo "Did not get a 'YES', so ignoring request"
return 1
else
parse_automode_flag -7
export rm_opts=""
fi
;;
-7)
input=0
export DELETE_ALL="yes"
;;
-5)
parse_automode_flag -3
export mv_opts=" ${mv_opts} "
mv_opts="${mv_opts// -i / }"
NONINTERACTIVE_MV=true
;;
-3)
input=0
export OVERWRITE_ALL="yes"
;;
*)
return 1
;;
esac
return 0
}
sel_file() {
local -i isfirst=0
until [[ -f ${TMP}/files/${input} ]] || \
[[ ${input} == -1 ]] || \
[[ ${input} == -3 ]]
do
local allfiles=( $(cd "${TMP}"/files/ && printf '%s\n' * | sort -n) )
local isfirst=${allfiles[0]}
# Optimize: no point in building the whole file list if
# we're not actually going to talk to the user.
if [[ ${OVERWRITE_ALL} == "yes" || ${DELETE_ALL} == "yes" ]] ; then
input=0
else
local numfiles=${#allfiles[@]}
local numwidth=${#numfiles}
local file fullfile line
for file in "${allfiles[@]}" ; do
fullfile="${TMP}/files/${file}"
line=$(head -n1 "${fullfile}")
printf '%*i%s %s' ${numwidth} ${file} "${PAR}" "${line}"
if [[ ${mode} == 0 ]] ; then
local numupdates=$(( $(wc -l <"${fullfile}") - 1 ))
echo " (${numupdates})"
else
echo
fi
done > "${TMP}"/menuitems
clear
if [[ ${mode} == 0 ]] ; then
cat <<-EOF
The following is the list of files which need updating, each
configuration file is followed by a list of possible replacement files.
$(<"${TMP}"/menuitems)
Please select a file to edit by entering the corresponding number.
(don't use -3, -5, -7 or -9 if you're unsure what to do)
(-1 to exit) (${_3_HELP_TEXT})
(${_5_HELP_TEXT})
(${_7_HELP_TEXT})
EOF
printf " (${_9_HELP_TEXT}): "
input=$(read_int)
else
dialog \
--title "${title}" \
--menu "Please select a file to update" \
0 0 0 $(<"${TMP}"/menuitems) \
2> "${TMP}"/input \
|| die "$(<"${TMP}"/input)\n\nUser termination!" 0
input=$(<"${TMP}"/input)
fi
: ${input:=0}
if [[ ${input} != 0 ]] ; then
parse_automode_flag ${input} || continue
fi
fi # -3 automerge
if [[ ${input} == 0 ]] ; then
input=${isfirst}
fi
done
}
user_special() {
local special="${PORTAGE_CONFIGROOT}etc/etc-update.special"
if [[ -r ${special} ]] ; then
if [[ -z $1 ]] ; then
error "user_special() called without arguments"
return 1
fi
local pat
while read -r pat ; do
echo "$1" | grep -q "${pat}" && return 0
done < "${special}"
fi
return 1
}
read_int() {
# Read an integer from stdin. Continously loops until a valid integer is
# read. This is a workaround for odd behavior of bash when an attempt is
# made to store a value such as "1y" into an integer-only variable.
local my_input
while : ; do
read my_input
# failed integer conversions will break a loop unless they're enclosed
# in a subshell.
echo "${my_input}" | (declare -i x; read x) 2>/dev/null && break
printf 'Value "%s" is not valid. Please enter an integer value: ' "${my_input}" >&2
done
echo ${my_input}
}
do_file() {
interactive_echo() { [ "${OVERWRITE_ALL}" != "yes" ] && [ "${DELETE_ALL}" != "yes" ] && echo; }
interactive_echo
local -i my_input
local -i linecnt
local fullfile="${TMP}/files/${input}"
local ofile=$(head -n1 "${fullfile}")
# Walk through all the pending updates for this one file.
linecnt=$(wc -l <"${fullfile}")
while (( linecnt > 1 )) ; do
if (( linecnt == 2 )) ; then
# Only one update ... keeps things simple.
my_input=1
else
my_input=0
fi
# Optimize: no point in scanning the file list when we know
# we're just going to consume all the ones available.
if [[ ${OVERWRITE_ALL} == "yes" || ${DELETE_ALL} == "yes" ]] ; then
my_input=1
fi
# Figure out which file they wish to operate on.
while (( my_input <= 0 || my_input >= linecnt )) ; do
local fcount=0
for line in $(<"${fullfile}"); do
if (( fcount > 0 )); then
printf '%i%s %s\n' ${fcount} "${PAR}" "${line}"
fi
: $(( ++fcount ))
done > "${TMP}"/menuitems
if [[ ${mode} == 0 ]] ; then
echo "Below are the new config files for ${ofile}:"
cat "${TMP}"/menuitems
echo -n "Please select a file to process (-1 to exit this file): "
my_input=$(read_int)
else
dialog \
--title "${title}" \
--menu "Please select a file to process for ${ofile}" \
0 0 0 $(<"${TMP}"/menuitems) \
2> "${TMP}"/input \
|| die "$(<"${TMP}"/input)\n\nUser termination!" 0
my_input=$(<"${TMP}"/input)
fi
if [[ ${my_input} == 0 ]] ; then
# Auto select the first file.
my_input=1
elif [[ ${my_input} == -1 ]] ; then
input=0
return
fi
done
# First line is the old file while the rest are the config files.
: $(( ++my_input ))
local file=$(sed -n -e "${my_input}p" "${fullfile}")
do_cfg "${file}" "${ofile}"
sed -i -e "${my_input}d" "${fullfile}"
: $(( --linecnt ))
done
interactive_echo
rm "${fullfile}"
: $(( --count ))
}
show_diff() {
clear
local file1=$1 file2=$2
if [[ ${using_editor} == 0 ]] ; then
(
echo "Showing differences between ${file1} and ${file2}"
diff_command "${file1}" "${file2}"
) | ${pager}
else
echo "Beginning of differences between ${file1} and ${file2}"
diff_command "${file1}" "${file2}"
echo "End of differences between ${file1} and ${file2}"
fi
}
do_cfg() {
local file=$1
local ofile=$2
local -i my_input=0
until (( my_input == -1 )) || [ ! -f "${file}" ] ; do
if [[ "${OVERWRITE_ALL}" == "yes" ]] && ! user_special "${ofile}"; then
my_input=1
elif [[ "${DELETE_ALL}" == "yes" ]] && ! user_special "${ofile}"; then
my_input=2
else
show_diff "${ofile}" "${file}"
if [[ -L ${file} ]] ; then
cat <<-EOF
-------------------------------------------------------------
NOTE: File is a symlink to another file. REPLACE recommended.
The original file may simply have moved. Please review.
-------------------------------------------------------------
EOF
fi
cat <<-EOF
File: ${file}
1) Replace original with update
2) Delete update, keeping original as is
3) Interactively merge original with update
4) Show differences again
5) Save update as example config
EOF
printf 'Please select from the menu above (-1 to ignore this update): '
my_input=$(read_int)
fi
case ${my_input} in
1) echo "Replacing ${ofile} with ${file}"
do_mv_ln ${mv_opts} "${file}" "${ofile}"
[ -n "${OVERWRITE_ALL}" ] && my_input=-1
continue
;;
2) echo "Deleting ${file}"
rm ${rm_opts} "${file}"
[ -n "${DELETE_ALL}" ] && my_input=-1
continue
;;
3) do_merge "${file}" "${ofile}"
my_input=${?}
# [ ${my_input} == 255 ] && my_input=-1
continue
;;
4) continue
;;
5) do_distconf "${file}" "${ofile}"
;;
*) continue
;;
esac
done
}
do_merge() {
# make sure we keep the merged file in the secure tempdir
# so we dont leak any information contained in said file
# (think of case where the file has 0600 perms; during the
# merging process, the temp file gets umask perms!)
local file="${1}"
local ofile="${2}"
local mfile="${TMP}/${2}.merged"
local -i my_input=0
echo "${file} ${ofile} ${mfile}"
if [[ -e ${mfile} ]] ; then
echo "A previous version of the merged file exists, cleaning..."
rm ${rm_opts} "${mfile}"
fi
# since mfile will be like $TMP/path/to/original-file.merged, we
# need to make sure the full /path/to/ exists ahead of time
mkdir -p "${mfile%/*}"
until (( my_input == -1 )); do
echo "Merging ${file} and ${ofile}"
$(echo "${merge_command}" |
sed -e "s:%merged:${mfile}:g" \
-e "s:%orig:${ofile}:g" \
-e "s:%new:${file}:g")
until (( my_input == -1 )); do
cat <<-EOF
1) Replace ${ofile} with merged file
2) Show differences between merged file and original
3) Remerge original with update
4) Edit merged file
5) Return to the previous menu
EOF
printf 'Please select from the menu above (-1 to exit, losing this merge): '
my_input=$(read_int)
case ${my_input} in
1) echo "Replacing ${ofile} with ${mfile}"
if [[ ${USERLAND} == BSD ]] ; then
chown "$(stat -f %Su:%Sg "${ofile}")" "${mfile}"
chmod $(stat -f %Mp%Lp "${ofile}") "${mfile}"
else
chown --reference="${ofile}" "${mfile}"
chmod --reference="${ofile}" "${mfile}"
fi
do_mv_ln ${mv_opts} "${mfile}" "${ofile}"
rm ${rm_opts} "${file}"
return 255
;;
2) show_diff "${ofile}" "${mfile}"
continue
;;
3) break
;;
4) ${EDITOR:-nano -w} "${mfile}"
continue
;;
5) rm ${rm_opts} "${mfile}"
return 0
;;
*) continue
;;
esac
done
done
rm ${rm_opts} "${mfile}"
return 255
}
do_distconf() {
# search for any previously saved distribution config
# files and number the current one accordingly
local file=$1 ofile=$2
local -i count
local suffix
local efile
for (( count = 0; count <= 9999; ++count )) ; do
suffix=$(printf ".dist_%04i" ${count})
efile="${ofile}${suffix}"
if [[ ! -f ${efile} ]] ; then
mv ${mv_opts} "${file}" "${efile}"
break
elif diff_command "${file}" "${efile}" &> /dev/null; then
# replace identical copy
mv "${file}" "${efile}"
break
fi
done
}
error() { echo "etc-update: ERROR: $*" 1>&2 ; return 1 ; }
die() {
trap SIGTERM
trap SIGINT
local msg=$1 exitcode=${2:-1}
if [ ${exitcode} -eq 0 ] ; then
${QUIET} || printf 'Exiting: %b\n' "${msg}"
scan > /dev/null
! ${QUIET} && [ ${count} -gt 0 ] && echo "NOTE: ${count} updates remaining"
else
error "${msg}"
fi
rm -rf "${TMP}"
exit ${exitcode}
}
_3_HELP_TEXT="-3 to auto merge all files"
_5_HELP_TEXT="-5 to auto-merge AND not use 'mv -i'"
_7_HELP_TEXT="-7 to discard all updates"
_9_HELP_TEXT="-9 to discard all updates AND not use 'rm -i'"
usage() {
cat <<-EOF
etc-update: Handle configuration file updates
Usage: etc-update [options] [paths to scan]
If no paths are specified, then \${CONFIG_PROTECT} will be used.
Options:
-d, --debug Enable shell debugging
-h, --help Show help and run away
-p, --preen Automerge trivial changes only and quit
-q, --quiet Show only essential output
-v, --verbose Show settings and such along the way
-V, --version Show version and trundle away
--automode <mode>
${_3_HELP_TEXT}
${_5_HELP_TEXT}
${_7_HELP_TEXT}
${_9_HELP_TEXT}
EOF
[[ $# -gt 1 ]] && printf "\nError: %s\n" "${*:2}" 1>&2
exit ${1:-0}
}
#
# Run the script
#
declare -i count=0
declare input=0
declare title="Gentoo's etc-update tool!"
PREEN=false
SET_X=false
QUIET=false
VERBOSE=false
NONINTERACTIVE_MV=false
while [[ -n $1 ]] ; do
case $1 in
-d|--debug) SET_X=true;;
-h|--help) usage;;
-p|--preen) PREEN=true;;
-q|--quiet) QUIET=true;;
-v|--verbose) VERBOSE=true;;
-V|--version) emerge --version; exit 0;;
--automode) parse_automode_flag $2 && shift || usage 1 "Invalid mode '$2'";;
-*) usage 1 "Invalid option '$1'";;
*) break;;
esac
shift
done
${SET_X} && set -x
type -P portageq >/dev/null || die "missing portageq"
portage_vars=(
CONFIG_PROTECT{,_MASK}
PORTAGE_CONFIGROOT
PORTAGE_INST_{G,U}ID
PORTAGE_TMPDIR
EROOT
USERLAND
NOCOLOR
)
eval $(${PORTAGE_PYTHON:+"${PORTAGE_PYTHON}"} "$(type -P portageq)" envvar -v ${portage_vars[@]})
export PORTAGE_TMPDIR
SCAN_PATHS=${*:-${CONFIG_PROTECT}}
TMP="${PORTAGE_TMPDIR}/etc-update-$$"
trap "die terminated" SIGTERM
trap "die interrupted" SIGINT
rm -rf "${TMP}" 2>/dev/null
mkdir "${TMP}" || die "failed to create temp dir"
# make sure we have a secure directory to work in
chmod 0700 "${TMP}" || die "failed to set perms on temp dir"
chown ${PORTAGE_INST_UID:-0}:${PORTAGE_INST_GID:-0} "${TMP}" || \
die "failed to set ownership on temp dir"
# Get all the user settings from etc-update.conf
cfg_vars=(
clear_term
eu_automerge
rm_opts
mv_opts
pager
diff_command
using_editor
merge_command
mode
)
# default them all to ""
eval ${cfg_vars[@]/%/=}
# then extract them all from the conf in one shot
# (ugly var at end is due to printf appending a '|' to last item)
get_config "($(printf '%s|' "${cfg_vars[@]}")NOVARFOROLDMEN)"
# finally setup any specific defaults
: ${mode:="0"}
if ! cmd_var_is_valid "${pager}" ; then
pager=${PAGER}
cmd_var_is_valid "${pager}" || pager=cat
fi
[[ ${clear_term} == "yes" ]] || clear() { :; }
if [[ ${using_editor} == "0" ]] ; then
# Sanity check to make sure diff exists and works
echo > "${TMP}"/.diff-test-1
echo > "${TMP}"/.diff-test-2
if ! diff_command "${TMP}"/.diff-test-1 "${TMP}"/.diff-test-2 ; then
die "'${diff_command}' does not seem to work, aborting"
fi
else
# NOTE: cmd_var_is_valid doesn't work with diff_command="eval emacs..."
# because it uses type -P.
if ! type ${diff_command%%[[:space:]]*} >/dev/null; then
die "'${diff_command}' does not seem to work, aborting"
fi
fi
if [[ ${mode} == "0" ]] ; then
PAR=")"
else
PAR=""
if ! type dialog >/dev/null || ! dialog --help >/dev/null ; then
die "mode=1 and 'dialog' not found or not executable, aborting"
fi
fi
if ${NONINTERACTIVE_MV} ; then
export mv_opts=" ${mv_opts} "
mv_opts="${mv_opts// -i / }"
fi
if ${VERBOSE} ; then
for v in ${portage_vars[@]} ${cfg_vars[@]} TMP SCAN_PATHS ; do
echo "${v}=${!v}"
done
fi
scan
${PREEN} && exit 0
until (( input == -1 )); do
if (( count == 0 )); then
die "Nothing left to do; exiting. :)" 0
fi
sel_file
if (( input != -1 )); then
do_file
fi
done
die "User termination!" 0