| commit | e06f314f920c4c7fbe579d43407277067ad44e21 | [log] [tgz] |
|---|---|---|
| author | Craig Hesling <hesling@chromium.org> | Wed Nov 27 11:50:47 2019 -0800 |
| committer | Commit Bot <commit-bot@chromium.org> | Fri Dec 06 01:46:34 2019 +0000 |
| tree | b2b19b384f70ad809fb54f61d9fb81622d3512d3 | |
| parent | c29840a67b8951a11bef4ec6ac98abf5d26761f5 [diff] |
UPSTREAM: hatch: Fix FPMCU pwr/rst gpio handling 1. No gpio control in bootblock 2. Disable power and assert reset in ramstage gpio 3. Power on and then deassert reset at the end of ramstage gpio 4. Disable power and assert reset when entering S5 On "reboot", the amount of time the power is disabled for is equivalent to the amount of time between triggering #4 and wrapping around to #3, which is about 400ms on Kohaku. Since #2 forces power off for FPMCU, S3 resume will still not work properly. Additionally, we must ensure that GPP_A12 is reconfigured as an output before going to any sleep state, since user space could have configured it to use its native3 function. See https://review.coreboot.org/c/coreboot/+/32111 for more detail. The control signals have been validated on a Kohaku in the following scenarios: 1. Cold startup 2. Issuing a "reboot" command 3. Issuing a "halt -p" and powering back on within 10 seconds 4. Issuing a "halt -p" and powering back on after 10 seconds 5. Entering and leaving S3 (does not work properly) 6. Entering and leaving S0iX BRANCH=hatch BUG=b/142751685 TEST=Verify all signals as mentioned above TEST=reboot flash_fp_mcu /opt/google/biod/fw/dartmonkey_v2.0.2417-af88cc91a.bin TEST=halt -p # power back on within 10 seconds flash_fp_mcu /opt/google/biod/fw/dartmonkey_v2.0.2417-af88cc91a.bin TEST=halt -p # power back on after 10 seconds flash_fp_mcu /opt/google/biod/fw/dartmonkey_v2.0.2417-af88cc91a.bin Change-Id: I1f032ce03ae3f59239e4ac760805ded952b7500d Signed-off-by: Shelley Chen <shchen@google.com> Original-Commit-Id: Original-Change-Id: I2e3ff42715611d519677a4256bdd172ec98687f9 Original-Signed-off-by: Craig Hesling <hesling@chromium.org> Original-Reviewed-on: https://review.coreboot.org/c/coreboot/+/37459 Original-Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Original-Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/1954440 Reviewed-by: Shelley Chen <shchen@chromium.org> Reviewed-by: Craig Hesling <hesling@chromium.org> Commit-Queue: Shelley Chen <shchen@chromium.org> Commit-Queue: Craig Hesling <hesling@chromium.org> Tested-by: Shelley Chen <shchen@chromium.org> Tested-by: Craig Hesling <hesling@chromium.org>
coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.
With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.
coreboot was formerly known as LinuxBIOS.
After the basic initialization of the hardware has been performed, any desired “payload” can be started by coreboot.
See https://www.coreboot.org/Payloads for a list of supported payloads.
coreboot supports a wide range of chipsets, devices, and mainboards.
For details please consult:
ANY_TOOLCHAIN Kconfig option if you’re feeling lucky (no support in this case).Optional:
make menuconfig and make nconfig)Please consult https://www.coreboot.org/Build_HOWTO for details.
If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.
Please see https://www.coreboot.org/QEMU for details.
Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:
You can contact us directly on the coreboot mailing list:
https://www.coreboot.org/Mailinglist
The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.
coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the “GPL (version 2, or any later version)”, and some files are licensed under the “GPL, version 2”. For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.
This makes the resulting coreboot images licensed under the GPL, version 2.