# SPDX-License-Identifier: GPL-2.0-only

source "src/security/tpm/tss/vendor/cr50/Kconfig"

menu "Trusted Platform Module"

choice
	prompt "Trusted Platform Module"
	default TPM2 if MAINBOARD_HAS_TPM2
	default TPM1 if MAINBOARD_HAS_TPM1
	default NO_TPM

config NO_TPM
	bool "No TPM"
	help
	  No TPM support. Select this option if your system doesn't have a TPM,
	  or if you don't want coreboot to communicate with your TPM in any way.
	  (If your board doesn't offer a TPM interface, this will be the only
	  possible option.)

config TPM1
	bool "TPM 1.2"
	depends on MAINBOARD_HAS_LPC_TPM || \
		   MAINBOARD_HAS_I2C_TPM_GENERIC || \
		   MAINBOARD_HAS_I2C_TPM_ATMEL
	depends on !MAINBOARD_HAS_TPM2
	help
	  Select this option if your TPM uses the older TPM 1.2 protocol.

config TPM2
	bool "TPM 2.0"
	depends on MAINBOARD_HAS_I2C_TPM_GENERIC || \
		   MAINBOARD_HAS_LPC_TPM || \
		   MAINBOARD_HAS_I2C_TPM_ATMEL || \
		   MAINBOARD_HAS_I2C_TPM_CR50 || \
		   MAINBOARD_HAS_SPI_TPM || \
		   MAINBOARD_HAS_CRB_TPM
	depends on !MAINBOARD_HAS_TPM1
	help
	  Select this option if your TPM uses the newer TPM 2.0 protocol.

endchoice

config TPM
	bool
	default y
	depends on TPM1 || TPM2

config MAINBOARD_HAS_TPM1
	bool
	help
	  This option can be selected by a mainboard to represent that its TPM
	  always uses the 1.2 protocol, and that it should be on by default.

config MAINBOARD_HAS_TPM2
	bool
	help
	  This option can be selected by a mainboard to represent that its TPM
	  always uses the 2.0 protocol, and that it should be on by default.

config TPM_DEACTIVATE
	bool "Deactivate TPM"
	default n
	depends on !VBOOT
	depends on TPM1
	help
	  Deactivate TPM by issuing deactivate command.

config DEBUG_TPM
	bool "Output verbose TPM debug messages"
	default n
	select DRIVER_TPM_DISPLAY_TIS_BYTES if I2C_TPM
	depends on TPM
	help
	  This option enables additional TPM related debug messages.

config TPM_RDRESP_NEED_DELAY
	bool "Enable Delay Workaround for TPM"
	default n
	depends on MAINBOARD_HAS_LPC_TPM
	help
	  Certain TPMs seem to need some delay when reading response
	  to work around a race-condition-related issue, possibly
	  caused by ill-programmed TPM firmware.

config TPM_STARTUP_IGNORE_POSTINIT
	bool
	help
	  Select this to ignore POSTINIT INVALID return codes on TPM
	  startup. This is useful on platforms where a previous stage
	  issued a TPM startup. Examples of use cases are Intel TXT
	  or VBOOT on the Intel Arrandale processor, which issues a
	  CPU-only reset during the romstage.

config TPM_MEASURED_BOOT
	bool "Enable Measured Boot"
	default n
	select VBOOT_LIB
	depends on TPM
	depends on !VBOOT_RETURN_FROM_VERSTAGE
	help
	  Enables measured boot (experimental)

config TPM_MEASURED_BOOT_INIT_BOOTBLOCK
	bool
	depends on TPM_MEASURED_BOOT && !VBOOT
	help
	  Initialize TPM inside the bootblock instead of ramstage. This is
	  useful with some form of hardware assisted root of trust
	  measurement like Intel TXT/CBnT.

config TPM_MEASURED_BOOT_RUNTIME_DATA
	string "Runtime data whitelist"
	default ""
	depends on TPM_MEASURED_BOOT
	help
	  Runtime data whitelist of cbfs filenames. Needs to be a
	  space delimited list

endmenu # Trusted Platform Module (tpm)