/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2013 Google Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
 */

#ifndef BAYTRAIL_XHCI_H
#define BAYTRAIL_XHCI_H

/* XHCI PCI Registers */
#define XHCI_PWR_CTL_STS	0x74
#define XHCI_USB2PR		0xd0
#define XHCI_USB2PRM		0xd4
#define XHCI_USB3PR		0xd8
#define XHCI_USB3PRM		0xdc
#define XHCI_USB2PDO		0xe4
#define XHCI_USB3PDO		0xe8

/* XHCI Memory Registers */
#define XHCI_USB3_PORTSC(port)	(0x4e0 + (port * 0x10))
# define  XHCI_USB3_PORTSC_CHST	  (0x7f << 17)
# define  XHCI_USB3_PORTSC_WCE	  (1 << 25)  /* Wake on Connect */
# define  XHCI_USB3_PORTSC_WDE	  (1 << 26)  /* Wake on Disconnect */
# define  XHCI_USB3_PORTSC_WOE	  (1 << 27)  /* Wake on Overcurrent */
# define  XHCI_USB3_PORTSC_WRC	  (1 << 19)  /* Warm Reset Complete */
# define  XHCI_USB3_PORTSC_LWS	  (1 << 16)  /* Link Write Strobe */
# define  XHCI_USB3_PORTSC_PED 	  (1 << 1)   /* Port Enabled/Disabled */
# define  XHCI_USB3_PORTSC_WPR	  (1 << 31)  /* Warm Port Reset */
# define  XHCI_USB3_PORTSC_PLS	  (0xf << 5) /* Port Link State */
# define   XHCI_PLSR_DISABLED	  (4 << 5)   /* Port is disabled */
# define   XHCI_PLSR_RXDETECT	  (5 << 5)   /* Port is disconnected */
# define   XHCI_PLSR_POLLING	  (7 << 5)   /* Port is polling */
# define   XHCI_PLSW_ENABLE	  (5 << 5)   /* Enable port */

/* The Fuse register is incorrect for Baytrail-M so use hardcoded values */
#define BYTM_USB2_PORT_COUNT	4
#define BYTM_USB2_PORT_MAP	0xf
#define BYTM_USB3_PORT_COUNT	1
#define BYTM_USB3_PORT_MAP	0x1

#define XHCI_RESET_TIMEOUT	100000  /* 100ms */

#endif /* BAYTRAIL_XHCI_H */