/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2012 The Chromium OS Authors. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; version 2 of
 * the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
 * MA 02110-1301 USA
 */

#ifndef __PRE_RAM__

#include <console/console.h>
#include <device/device.h>
#include <device/pnp.h>
#include <stdlib.h>
#include <arch/io.h>
#include <delay.h>
#include "ec.h"
#include "chip.h"

/* helper functions from drivers/pc80/keyboard.c */
static int input_buffer_empty(u16 status_reg)
{
	u32 timeout;
	for(timeout = KBC_TIMEOUT_IN_MS; timeout && (inb(status_reg) & KBD_IBF);
	    timeout--) {
		mdelay(1);
	}

	if (!timeout) {
		printk(BIOS_WARNING, "EC-IT8518 Unexpected input buffer full\n");
	}
	return !!timeout;
}


static int output_buffer_full(u16 status_reg)
{
	u32 timeout;
	for(timeout = KBC_TIMEOUT_IN_MS; timeout && ((inb(status_reg)
	    & KBD_OBF) == 0); timeout--) {
		mdelay(1);
	}

	if (!timeout) {
		printk(BIOS_INFO, "EC-IT8518 output buffer result timeout\n");
	}
	return !!timeout;
}


/* The IT8518 60/64 EC registers are the same command/status IB/OB KBC pair.
 * Check status from 64 port before each command.
 *
 *  Ex. Get panel ID command C43/D77
 *  Check IBF empty. Then Write 0x43(CMD) to 0x64 Port
 *  Check IBF empty. Then Write 0x77(DATA) to 0x60 Port
 *  Check OBF set. Then Get Data(0x03:panel ID) from 0x60
 * Different commands return may or may not respond and may have multiple
 * bytes. Keep it simple for nor
 */

u8 ec_kbc_read_ob(void)
{
	if (!output_buffer_full(KBD_STATUS)) return 0;
	return inb(KBD_DATA);
}

void ec_kbc_write_cmd(u8 cmd)
{
	if (!input_buffer_empty(KBD_STATUS)) return;
	outb(cmd, KBD_COMMAND);
}

void ec_kbc_write_ib(u8 data)
{
	if (!input_buffer_empty(KBD_STATUS)) return;
	outb(data, KBD_DATA);
}


/*
 * These functions are for accessing the IT8518 device RAM space
 */

u8 ec_read_ob(void)
{
	if (!output_buffer_full(EC_SC)) return 0;
	return inb(EC_DATA);
}

void ec_write_cmd(u8 cmd)
{
	if (!input_buffer_empty(EC_SC)) return;
	outb(cmd, EC_SC);
}

void ec_write_ib(u8 data)
{
	if (!input_buffer_empty(EC_SC)) return;
	outb(data, EC_DATA);
}

u8 ec_read(u16 addr)
{
	ec_write_cmd(RD_EC);
	ec_write_ib(addr);
	return ec_read_ob();
}

void ec_write(u16 addr, u8 data)
{
	ec_write_cmd(WR_EC);
	ec_write_ib(addr);
	ec_write_ib(data);
}

u8 ec_it8518_get_event(void)
{
	u8 cmd = 0;
	u8 status = inb(EC_SC);
	if ((status & SMI_EVT) || (status & SCI_EVT))
	{
		ec_write_cmd(QR_EC);
		cmd = ec_read_ob();
	}
	return cmd;
}

#ifndef __SMM__
static void it8518_init(device_t dev)
{
	struct ec_quanta_it8518_config *conf = dev->chip_info;


	if (!dev->enabled)
		return;

	printk(BIOS_DEBUG, "Quanta IT8518: Initializing keyboard.\n");
	pc_keyboard_init(&conf->keyboard);
}


static void it8518_read_resources(device_t dev)
{
	/* This function avoids an error on serial console. */
}


static void it8518_enable_resources(device_t dev)
{
	/* This function avoids an error on serial console. */
}

static struct device_operations ops = {
	.init             = it8518_init,
	.read_resources   = it8518_read_resources,
	.enable_resources = it8518_enable_resources
};

static struct pnp_info pnp_dev_info[] = {
        { &ops, 0, 0, { 0, 0 }, }
};

static void enable_dev(device_t dev)
{
	pnp_enable_devices(dev, &pnp_ops, ARRAY_SIZE(pnp_dev_info),
			   pnp_dev_info);
}

struct chip_operations ec_quanta_it8518_ops = {
	CHIP_NAME("QUANTA IT8518 EC")
	.enable_dev = enable_dev
};
#endif /* ! __SMM__ */
#endif /* ! __PRE_RAM__ */