blob: 22b7fb17df0995baf45204596998b92c932ca6ad [file] [log] [blame]
/**
* @file
*
* SB common library
*
*
*
* @xrefitem bom "File Content Label" "Release Content"
* @e project: Common Library
* @e sub-project:
* @e \$Revision:$ @e \$Date:$
*
*/
/*****************************************************************************
*
* Copyright (C) 2012 Advanced Micro Devices, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Advanced Micro Devices, Inc. nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*
***************************************************************************/
/*----------------------------------------------------------------------------------------
* M O D U L E S U S E D
*----------------------------------------------------------------------------------------
*/
#include "AGESA.h"
#include "amdlib.h"
#include "amdSbLib.h"
/*----------------------------------------------------------------------------------------
* D E F I N I T I O N S A N D M A C R O S
*----------------------------------------------------------------------------------------
*/
/*----------------------------------------------------------------------------------------
* T Y P E D E F S A N D S T R U C T U R E S
*----------------------------------------------------------------------------------------
*/
/*----------------------------------------------------------------------------------------
* P R O T O T Y P E S O F L O C A L F U N C T I O N S
*----------------------------------------------------------------------------------------
*/
/*----------------------------------------------------------------------------------------
* E X P O R T E D F U N C T I O N S
*----------------------------------------------------------------------------------------
*/
/*----------------------------------------------------------------------------------------*/
/**
* Stall
*
*
*
* @param[in] uSec
*
*/
VOID
LibAmdSbStall (
IN UINT32 uSec,
IN VOID *ConfigPtr
)
{
UINT16 AcpiTimerBaseAddress;
UINT32 StartTime;
UINT32 ElapsedTime;
SB_INFO SbInfo;
SbInfo = LibAmdSbGetRevisionInfo (ConfigPtr);
if (SbInfo.Type == SB_UNKNOWN) {
AcpiTimerBaseAddress = 0;
} else {
LibAmdSbPmioRead ((SbInfo.Type == SB_SB700) ? 0x24 : 0x64, AccessWidth16, &AcpiTimerBaseAddress, ConfigPtr);
}
if (AcpiTimerBaseAddress == 0) {
uSec = uSec / 2;
while (uSec != 0) {
LibAmdIoRead (AccessWidth8, 0x80, &StartTime, (AMD_CONFIG_PARAMS *)ConfigPtr);
uSec--;
}
} else {
LibAmdIoRead (AccessWidth32, AcpiTimerBaseAddress, &StartTime, (AMD_CONFIG_PARAMS *)ConfigPtr);
do {
LibAmdIoRead (AccessWidth32, AcpiTimerBaseAddress, &ElapsedTime, (AMD_CONFIG_PARAMS *)ConfigPtr);
if (ElapsedTime < StartTime) {
ElapsedTime = ElapsedTime + (0xFFFFFFFF - StartTime);
} else {
ElapsedTime = ElapsedTime - StartTime;
}
} while ((ElapsedTime*28/100)<uSec); //28/100
}
}
/*----------------------------------------------------------------------------------------*/
/**
* Read PMIO
*
*
*
* @param[in] uSec
*
*/
VOID
LibAmdSbPmioRead (
IN UINT8 Address,
IN ACCESS_WIDTH Width,
OUT VOID *Value,
IN VOID *ConfigPtr
)
{
UINT8 i;
if (Width > 0x80) {
Width -= 0x80;
}
for (i = 0; i <= Width; i++) {
LibAmdIoWrite (AccessWidth8, 0xCD6, &Address, (AMD_CONFIG_PARAMS *)ConfigPtr); // SB_IOMAP_REGCD6
Address++;
LibAmdIoRead (AccessWidth8,0xCD7, (UINT8 *)Value + i, (AMD_CONFIG_PARAMS *)ConfigPtr); // SB_IOMAP_REGCD7
}
}
/*----------------------------------------------------------------------------------------*/
/**
* Read PMIO
*
*
*
* @param[in] uSec
*
*/
VOID
LibAmdSbPmioWrite (
IN UINT8 Address,
IN ACCESS_WIDTH Width,
IN VOID *Value,
IN VOID *ConfigPtr
)
{
UINT8 i;
if (Width > 0x80) {
Width -= 0x80;
}
for (i = 0; i <= Width; i++) {
LibAmdIoWrite (AccessWidth8, 0xCD6, &Address, (AMD_CONFIG_PARAMS *)ConfigPtr); // SB_IOMAP_REGCD6
Address++;
LibAmdIoWrite (AccessWidth8,0xCD7, (UINT8 *)Value + i, (AMD_CONFIG_PARAMS *)ConfigPtr); // SB_IOMAP_REGCD7
}
}
/*----------------------------------------------------------------------------------------*/
/**
* Get SB Type
*
*
*
*
* @param[in] pConfig Northbridge configuration structure pointer.
*/
/*----------------------------------------------------------------------------------------*/
SB_INFO
LibAmdSbGetRevisionInfo (
IN VOID *ConfigPtr
)
{
UINT32 DeviceId;
UINT8 RevisionId;
SB_INFO SbInfo;
PCI_ADDR SbSmbusAddress;
SbSmbusAddress.AddressValue = MAKE_SBDFO (0, 0, 0x14, 0, 0x00);
LibAmdPciRead (AccessWidth32, SbSmbusAddress, &DeviceId, (AMD_CONFIG_PARAMS *)ConfigPtr);
SbInfo.Revision = SB_REV_UNKNOWN;
switch (DeviceId) {
case 0x43851002:
SbSmbusAddress.AddressValue = MAKE_SBDFO (0, 0, 0x14, 0, 0x08);
LibAmdPciRead (AccessWidth8, SbSmbusAddress, &RevisionId, (AMD_CONFIG_PARAMS *)ConfigPtr);
if (RevisionId >= 0x40) {
SbInfo.Type = SB_SB800;
} else {
SbInfo.Type = SB_SB700;
}
break;
default:
SbInfo.Type = SB_UNKNOWN;
}
return SbInfo;
}