| /* $NoKeywords:$ */ |
| /** |
| * @file |
| * |
| * mttwl3.c |
| * |
| * Technology Phy assisted write levelization for DDR3 |
| * |
| * @xrefitem bom "File Content Label" "Release Content" |
| * @e project: AGESA |
| * @e sub-project: (Mem/Tech/DDR3) |
| * @e \$Revision: 63425 $ @e \$Date: 2011-12-22 11:24:10 -0600 (Thu, 22 Dec 2011) $ |
| * |
| **/ |
| /***************************************************************************** |
| * |
| * Copyright 2008 - 2012 ADVANCED MICRO DEVICES, INC. All Rights Reserved. |
| * |
| * AMD is granting you permission to use this software (the Materials) |
| * pursuant to the terms and conditions of your Software License Agreement |
| * with AMD. This header does *NOT* give you permission to use the Materials |
| * or any rights under AMD's intellectual property. Your use of any portion |
| * of these Materials shall constitute your acceptance of those terms and |
| * conditions. If you do not agree to the terms and conditions of the Software |
| * License Agreement, please do not use any portion of these Materials. |
| * |
| * CONFIDENTIALITY: The Materials and all other information, identified as |
| * confidential and provided to you by AMD shall be kept confidential in |
| * accordance with the terms and conditions of the Software License Agreement. |
| * |
| * LIMITATION OF LIABILITY: THE MATERIALS AND ANY OTHER RELATED INFORMATION |
| * PROVIDED TO YOU BY AMD ARE PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED |
| * WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO WARRANTIES OF |
| * MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY PARTICULAR PURPOSE, |
| * OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR USAGE OF TRADE. |
| * IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY DAMAGES WHATSOEVER |
| * (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS |
| * INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF AMD'S NEGLIGENCE, |
| * GROSS NEGLIGENCE, THE USE OF OR INABILITY TO USE THE MATERIALS OR ANY OTHER |
| * RELATED INFORMATION PROVIDED TO YOU BY AMD, EVEN IF AMD HAS BEEN ADVISED OF |
| * THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE |
| * EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, |
| * THE ABOVE LIMITATION MAY NOT APPLY TO YOU. |
| * |
| * AMD does not assume any responsibility for any errors which may appear in |
| * the Materials or any other related information provided to you by AMD, or |
| * result from use of the Materials or any related information. |
| * |
| * You agree that you will not reverse engineer or decompile the Materials. |
| * |
| * NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any |
| * further information, software, technical information, know-how, or show-how |
| * available to you. Additionally, AMD retains the right to modify the |
| * Materials at any time, without notice, and is not obligated to provide such |
| * modified Materials to you. |
| * |
| * U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with |
| * "RESTRICTED RIGHTS." Use, duplication, or disclosure by the Government is |
| * subject to the restrictions as set forth in FAR 52.227-14 and |
| * DFAR252.227-7013, et seq., or its successor. Use of the Materials by the |
| * Government constitutes acknowledgement of AMD's proprietary rights in them. |
| * |
| * EXPORT ASSURANCE: You agree and certify that neither the Materials, nor any |
| * direct product thereof will be exported directly or indirectly, into any |
| * country prohibited by the United States Export Administration Act and the |
| * regulations thereunder, without the required authorization from the U.S. |
| * government nor will be used for any purpose prohibited by the same. |
| * *************************************************************************** |
| * |
| */ |
| |
| /* |
| *---------------------------------------------------------------------------- |
| * MODULES USED |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| |
| |
| #include "AGESA.h" |
| #include "Ids.h" |
| #include "mm.h" |
| #include "mn.h" |
| #include "mu.h" |
| #include "mt.h" |
| #include "mp.h" |
| #include "mtsdi3.h" |
| #include "mtlrdimm3.h" |
| #include "merrhdl.h" |
| #include "OptionMemory.h" |
| #include "PlatformMemoryConfiguration.h" |
| #include "GeneralServices.h" |
| #include "Filecode.h" |
| CODE_GROUP (G1_PEICC) |
| RDATA_GROUP (G1_PEICC) |
| |
| #define FILECODE PROC_MEM_TECH_DDR3_MTTWL3_FILECODE |
| /*---------------------------------------------------------------------------- |
| * DEFINITIONS AND MACROS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| extern MEM_PSC_FLOW_BLOCK* memPlatSpecFlowArray[]; |
| |
| /*---------------------------------------------------------------------------- |
| * TYPEDEFS AND STRUCTURES |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| /*---------------------------------------------------------------------------- |
| * PROTOTYPES OF LOCAL FUNCTIONS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| BOOLEAN |
| STATIC |
| MemTWriteLevelizationHw3 ( |
| IN OUT MEM_TECH_BLOCK *TechPtr, |
| IN UINT8 Pass |
| ); |
| |
| VOID |
| STATIC |
| MemTWLPerDimmHw3 ( |
| IN OUT MEM_TECH_BLOCK *TechPtr, |
| IN UINT8 Dimm, |
| IN UINT8 Pass |
| ); |
| |
| VOID |
| STATIC |
| MemTPrepareDIMMs3 ( |
| IN OUT MEM_TECH_BLOCK *TechPtr, |
| IN UINT8 TargetDIMM, |
| IN BOOLEAN Wl |
| ); |
| |
| VOID |
| STATIC |
| MemTProcConfig3 ( |
| IN OUT MEM_TECH_BLOCK *TechPtr, |
| IN UINT8 Dimm, |
| IN UINT8 Pass |
| ); |
| |
| VOID |
| STATIC |
| MemTBeginWLTrain3 ( |
| IN OUT MEM_TECH_BLOCK *TechPtr, |
| IN UINT8 Dimm |
| ); |
| |
| /*---------------------------------------------------------------------------- |
| * EXPORTED FUNCTIONS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * This function executes first pass of Phy assisted write levelization |
| * for a specific node (DDR800). |
| * |
| * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK |
| * |
| * @return TRUE - No fatal error occurs. |
| * @return FALSE - Fatal error occurs. |
| */ |
| |
| BOOLEAN |
| MemTWriteLevelizationHw3Pass1 ( |
| IN OUT MEM_TECH_BLOCK *TechPtr |
| ) |
| { |
| return MemTWriteLevelizationHw3 (TechPtr, 1); |
| } |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * This function executes second pass of Phy assisted write levelization |
| * for a specific node (DDR1066 and above). |
| * |
| * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK |
| * |
| * @return TRUE - No fatal error occurs. |
| * @return FALSE - Fatal error occurs. |
| */ |
| |
| BOOLEAN |
| MemTWriteLevelizationHw3Pass2 ( |
| IN OUT MEM_TECH_BLOCK *TechPtr |
| ) |
| { |
| // If current speed is higher than start-up speed, do second pass of WL |
| if (TechPtr->NBPtr->DCTPtr->Timings.Speed > TechPtr->NBPtr->StartupSpeed) { |
| return MemTWriteLevelizationHw3 (TechPtr, 2); |
| } |
| return TRUE; |
| } |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * This function prepares for Phy assisted training. |
| * |
| * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK |
| * |
| * @return TRUE - No fatal error occurs. |
| * @return FALSE - Fatal error occurs. |
| */ |
| |
| BOOLEAN |
| MemTPreparePhyAssistedTraining ( |
| IN OUT MEM_TECH_BLOCK *TechPtr |
| ) |
| { |
| // Disable auto refresh by configuring F2x[1, 0]8C[DisAutoRefresh] = 1. |
| TechPtr->NBPtr->BrdcstSet (TechPtr->NBPtr, BFDisAutoRefresh, 1); |
| // Disable ZQ calibration short command by configuring F2x[1, 0]94[ZqcsInterval] = 00b. |
| TechPtr->NBPtr->BrdcstSet (TechPtr->NBPtr, BFZqcsInterval, 0); |
| // Attempt to get the seeds value from PSC tables for WL and RxEn pass1 training if applicable. |
| if (!TechPtr->NBPtr->PsPtr->MemPGetPass1Seeds (TechPtr->NBPtr)) { |
| ASSERT (FALSE); |
| } |
| |
| return (BOOLEAN) (TechPtr->NBPtr->MCTPtr->ErrCode < AGESA_FATAL); |
| } |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * This function revert to normal settings when exiting from Phy assisted training. |
| * |
| * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK |
| * |
| * @return TRUE - No fatal error occurs. |
| * @return FALSE - Fatal error occurs. |
| */ |
| |
| BOOLEAN |
| MemTExitPhyAssistedTraining ( |
| IN OUT MEM_TECH_BLOCK *TechPtr |
| ) |
| { |
| MEM_NB_BLOCK *NBPtr; |
| NBPtr = TechPtr->NBPtr; |
| |
| // 13.Program F2x[1, 0]8C[DisAutoRefresh] = 0. |
| NBPtr->BrdcstSet (NBPtr, BFDisAutoRefresh, 0); |
| // 14.Program F2x[1, 0]94[ZqcsInterval] to the proper interval for the current memory configuration. |
| NBPtr->BrdcstSet (NBPtr, BFZqcsInterval, 2); |
| NBPtr->FamilySpecificHook[ExitPhyAssistedTraining] (NBPtr, NBPtr); |
| |
| return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL); |
| } |
| |
| /*---------------------------------------------------------------------------- |
| * LOCAL FUNCTIONS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * This function executed hardware based write levelization for a specific die |
| * |
| * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK |
| * @param[in] Pass - Pass number (1 (400Mhz) or 2 (>400Mhz)) |
| * |
| * @pre Auto refresh and ZQCL must be disabled |
| * |
| * @return TRUE - No fatal error occurs. |
| * @return FALSE - Fatal error occurs. |
| */ |
| |
| BOOLEAN |
| STATIC |
| MemTWriteLevelizationHw3 ( |
| IN OUT MEM_TECH_BLOCK *TechPtr, |
| IN UINT8 Pass |
| ) |
| { |
| MEM_NB_BLOCK *NBPtr; |
| DCT_STRUCT *DCTPtr; |
| UINT8 Dct; |
| UINT8 ChipSel; |
| |
| NBPtr = TechPtr->NBPtr; |
| |
| IDS_HDT_CONSOLE (MEM_STATUS, "\nStart write leveling\n"); |
| AGESA_TESTPOINT (TpProcMemWriteLevelizationTraining, &(NBPtr->MemPtr->StdHeader)); |
| // Begin DQS Write timing training |
| for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { |
| NBPtr->SwitchDCT (NBPtr, Dct); |
| IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct); |
| DCTPtr = NBPtr->DCTPtr; |
| |
| TechPtr->WLCriticalDelay = 0x00; |
| |
| //training for each Dimm/CS |
| for (ChipSel = 0; ChipSel < NBPtr->CsPerChannel; ChipSel = ChipSel + NBPtr->CsPerDelay) { |
| if ((DCTPtr->Timings.CsEnabled & ((UINT16) ((NBPtr->CsPerDelay == 2)? 3 : 1) << ChipSel)) != 0) { |
| if (!(NBPtr->MCTPtr->Status[SbLrdimms]) || ((NBPtr->ChannelPtr->LrDimmPresent & ((UINT8) 1 << (ChipSel >> 1))) != 0)) { |
| IDS_HDT_CONSOLE (MEM_STATUS, "\t\tCS %d\n", ChipSel); |
| MemTWLPerDimmHw3 (TechPtr, (ChipSel / NBPtr->CsPerDelay), Pass); |
| } |
| } |
| } |
| |
| NBPtr->FamilySpecificHook[CalcWrDqDqsEarly] (NBPtr, NULL); |
| } |
| IDS_HDT_CONSOLE (MEM_FLOW, "End write leveling\n\n"); |
| return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL); |
| } |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * This function initializes per DIMM write levelization |
| * |
| * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK |
| * @param[in] Dimm - DIMM to be trained |
| * @param[in] Pass - Pass number (1 (400Mhz) or 2 (>400Mhz)) |
| * |
| */ |
| |
| VOID |
| STATIC |
| MemTWLPerDimmHw3 ( |
| IN OUT MEM_TECH_BLOCK *TechPtr, |
| IN UINT8 Dimm, |
| IN UINT8 Pass |
| ) |
| { |
| MEM_DATA_STRUCT *MemPtr; |
| MEM_NB_BLOCK *NBPtr; |
| |
| NBPtr = TechPtr->NBPtr; |
| MemPtr = NBPtr->MemPtr; |
| |
| ASSERT (Dimm < (NBPtr->CsPerChannel / NBPtr->CsPerDelay)); |
| |
| // 1. A. Specify the target Dimm that is to be trained by programming |
| // F2x[1, 0]9C_x08[TrDimmSel]. |
| NBPtr->SetBitField (NBPtr, BFTrDimmSel, Dimm); |
| |
| TechPtr->TargetDIMM = Dimm; |
| NBPtr->FamilySpecificHook[InitPerNibbleTrn] (NBPtr, NULL); |
| for (TechPtr->TrnNibble = NIBBLE_0; TechPtr->TrnNibble <= (NBPtr->FamilySpecificHook[TrainWlPerNibble] (NBPtr, &Dimm)? NIBBLE_0 : NIBBLE_1); TechPtr->TrnNibble++) { |
| // 2. Prepare the DIMMs for write levelization using DDR3-defined |
| // MR commands. |
| MemTPrepareDIMMs3 (TechPtr, Dimm, TRUE); |
| |
| // 3. After the DIMMs are configured, BIOS waits 40 MEMCLKs to |
| // satisfy DDR3-defined internal DRAM timing. |
| NBPtr->WaitXMemClks (NBPtr, 40); |
| |
| // 4. Configure the processor's DDR phy for write levelization training: |
| MemTProcConfig3 (TechPtr, Dimm, Pass); |
| |
| // 5. Begin write levelization training |
| MemTBeginWLTrain3 (TechPtr, Dimm); |
| } |
| // 7. Program the target Dimm back to normal operation |
| MemTPrepareDIMMs3 (TechPtr, Dimm, FALSE); |
| } |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * This function prepares the DIMMS for Write Levelization |
| * |
| * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK |
| * @param[in] TargetDIMM - DIMM to be trained |
| * @param[in] Wl - Indicates if WL mode should be enabled |
| * |
| */ |
| |
| VOID |
| STATIC |
| MemTPrepareDIMMs3 ( |
| IN OUT MEM_TECH_BLOCK *TechPtr, |
| IN UINT8 TargetDIMM, |
| IN BOOLEAN Wl |
| ) |
| { |
| MEM_NB_BLOCK *NBPtr; |
| UINT8 ChipSel; |
| |
| NBPtr = TechPtr->NBPtr; |
| |
| AGESA_TESTPOINT (TpProcMemWlPrepDimms, &(NBPtr->MemPtr->StdHeader)); |
| ASSERT (TargetDIMM < (NBPtr->CsPerChannel / NBPtr->CsPerDelay)); |
| TechPtr->TargetDIMM = TargetDIMM; |
| if (!(TechPtr->TechnologySpecificHook[WlTrainingPrepareLrdimm] (TechPtr, &Wl))) { |
| for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel++) { |
| if ((NBPtr->DCTPtr->Timings.CsPresent & ((UINT16)1 << ChipSel)) != 0) { |
| NBPtr->SetBitField (NBPtr, BFMrsChipSel, ChipSel); |
| // Set MR1 to F2x7C[MrsAddress], F2x7C[MrsBank]=1 |
| MemTEMRS13 (TechPtr, Wl, TargetDIMM); |
| NBPtr->SendMrsCmd (NBPtr); |
| // Set MR2 to F2x7C[MrsAddress], F2x7C[MrsBank]=1 |
| MemTEMRS23 (TechPtr); |
| // Send command |
| NBPtr->SendMrsCmd (NBPtr); |
| } |
| } |
| if (Wl) { |
| // Program WrLvOdt for the Target DIMM (or CS) |
| NBPtr->SetBitField (NBPtr, BFWrLvOdt, NBPtr->ChannelPtr->PhyWLODT[TargetDIMM]); |
| } |
| } |
| } |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * This function programs seed values for Write Levelization |
| * |
| * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK |
| * @param[in] Dimm - DIMM to be trained |
| * @param[in] Pass - Pass for WL training (1 - 400Mhz or 2 - >400Mhz) |
| * |
| */ |
| |
| VOID |
| STATIC |
| MemTProcConfig3 ( |
| IN OUT MEM_TECH_BLOCK *TechPtr, |
| IN UINT8 Dimm, |
| IN UINT8 Pass |
| ) |
| { |
| DIE_STRUCT *MCTPtr; |
| CH_DEF_STRUCT *ChannelPtr; |
| MEM_NB_BLOCK *NBPtr; |
| UINT16 WrDqsDly; |
| // Memclk Delay incurred by register. |
| UINT8 MemClkRegDly; |
| UINT8 ByteLane; |
| UINT8 DefaultSeed; |
| UINT8 CurrentSeed; |
| UINT8 *Seed; |
| UINT8 RCW2; |
| UINT16 Speed; |
| INT16 WrDqsBias; |
| |
| NBPtr = TechPtr->NBPtr; |
| MCTPtr = NBPtr->MCTPtr; |
| ChannelPtr = TechPtr->NBPtr->ChannelPtr; |
| |
| AGESA_TESTPOINT (TpProcMemWlConfigDimms, &(NBPtr->MemPtr->StdHeader)); |
| RCW2 = ChannelPtr->CtrlWrd02[Dimm]; |
| Speed = TechPtr->NBPtr->DCTPtr->Timings.Speed; |
| |
| IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t Byte: 00 01 02 03 04 05 06 07 ECC\n"); |
| IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tSeeds: "); |
| // Program an initialization Value to registers F2x[1, 0]9C_x[51:50] and F2x[1, 0]9C_x52 to set |
| // the gross and fine delay for all the byte lane fields. If the target frequency is different than 400MHz, |
| // BIOS must execute two training passes for each Dimm. For pass 1 at a 400MHz MEMCLK frequency, |
| // use an initial total delay value. |
| if (Pass == 1) { |
| // |
| // Get the default value of seed |
| // |
| if (MCTPtr->Status[SbRegistered]) { |
| // |
| // RDIMM |
| // |
| if (Speed == DDR667_FREQUENCY) { |
| DefaultSeed = ((RCW2 & BIT0) == 0) ? 0x3B : 0x4B; |
| } else { |
| DefaultSeed = ((RCW2 & BIT0) == 0) ? 0x41 : 0x51; |
| } |
| } else if (ChannelPtr->SODimmPresent != 0) { |
| // |
| // SODIMMM |
| // |
| DefaultSeed = 0x12; |
| } else if (MCTPtr->Status[SbLrdimms]) { |
| // |
| // LRDIMM |
| // |
| DefaultSeed = 0xF7; |
| } else { |
| // |
| // UDIMMM |
| // |
| DefaultSeed = 0x1A; |
| } |
| |
| NBPtr->FamilySpecificHook[OverrideWLSeed] (NBPtr, &DefaultSeed); |
| ASSERT (Speed >= DDR667_FREQUENCY); |
| |
| // Get platform override seed |
| Seed = (UINT8 *) FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_WL_SEED, MCTPtr->SocketId, ChannelPtr->ChannelID, Dimm, |
| &(NBPtr->MCTPtr->LogicalCpuid), &(NBPtr->MemPtr->StdHeader)); |
| for (ByteLane = 0; ByteLane < TechPtr->DlyTableWidth (); ByteLane++) { |
| // This includes ECC as byte 8 |
| CurrentSeed = ((Seed != NULL) ? Seed[ByteLane] : DefaultSeed); |
| ChannelPtr->WrDqsDlys[Dimm * TechPtr->DlyTableWidth () + ByteLane] = CurrentSeed; |
| |
| if (NBPtr->IsSupported[WLSeedAdjust]) { |
| if ((CurrentSeed & 0x20) != 0) { |
| // If (SeedGross is odd) then SeedPreGross = 1 |
| CurrentSeed = (CurrentSeed & 0x1F) | 0x20; |
| } else { |
| // If (SeedGross is even) then SeedPreGross = 2 |
| CurrentSeed = (CurrentSeed & 0x1F) | 0x40; |
| } |
| } |
| |
| NBPtr->SetTrainDly (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), CurrentSeed); |
| IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", CurrentSeed); |
| } |
| } else { |
| //10.Multiply the previously saved delay values in Pass 1, step #5 by (target frequency)/400 to find |
| //the gross and fine delay initialization values at the target frequency. Use these values as the initial |
| //seed values when executing Pass 2, step #4. |
| for (ByteLane = 0; ByteLane < TechPtr->DlyTableWidth (); ByteLane++) { |
| // This includes ECC as byte 8 |
| WrDqsDly = ChannelPtr->WrDqsDlys[Dimm * TechPtr->DlyTableWidth () + ByteLane]; |
| TechPtr->Bytelane = ByteLane; |
| NBPtr->FamilySpecificHook[TrainWlPerNibbleSeed] (NBPtr, &WrDqsDly); |
| |
| if (MCTPtr->Status[SbRegistered]) { |
| // |
| // For Registered Dimms |
| // |
| MemClkRegDly = ((RCW2 & BIT0) == 0) ? 0x20 : 0x30; |
| } else { |
| // |
| // Unbuffered Dimms and LRDIMMs |
| // |
| MemClkRegDly = 0; |
| } |
| // |
| // Recover any adjustmen to delay for WrDqDqsEarly |
| // |
| WrDqsBias = 0; |
| NBPtr->FamilySpecificHook[AdjustWrDqsBeforeSeedScaling] (NBPtr, &WrDqsBias); |
| |
| // Scale WrDqsDly to the next speed |
| WrDqsDly = (UINT16) (MemClkRegDly + ((((INT32) WrDqsDly - MemClkRegDly - WrDqsBias) * Speed) / TechPtr->PrevSpeed)); |
| |
| ChannelPtr->WrDqsDlys[Dimm * TechPtr->DlyTableWidth () + ByteLane] = (UINT8) WrDqsDly; |
| |
| if (NBPtr->IsSupported[WLSeedAdjust]) { |
| if ((WrDqsDly & 0x20) != 0) { |
| // If (SeedGross is odd) then SeedPreGross = 1 |
| WrDqsDly = (WrDqsDly & 0x1F) | 0x20; |
| } else { |
| // If (SeedGross is even) then SeedPreGross = 2 |
| WrDqsDly = (WrDqsDly & 0x1F) | 0x40; |
| } |
| } |
| NBPtr->SetTrainDly (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), WrDqsDly); |
| IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", WrDqsDly); |
| } |
| } |
| IDS_HDT_CONSOLE (MEM_FLOW, "\n"); |
| } |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * This function begins WL training for a specific DIMM |
| * |
| * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK |
| * @param[in] Dimm - DIMM to be trained |
| * |
| */ |
| |
| VOID |
| STATIC |
| MemTBeginWLTrain3 ( |
| IN OUT MEM_TECH_BLOCK *TechPtr, |
| IN UINT8 Dimm |
| ) |
| { |
| MEM_DATA_STRUCT *MemPtr; |
| DIE_STRUCT *MCTPtr; |
| MEM_NB_BLOCK *NBPtr; |
| UINT8 ByteLane; |
| UINT8 Seed; |
| UINT8 Delay; |
| INT16 Delay16; |
| |
| NBPtr = TechPtr->NBPtr; |
| MemPtr = NBPtr->MemPtr; |
| MCTPtr = NBPtr->MCTPtr; |
| |
| AGESA_TESTPOINT (TpProcMemWlTrainTargetDimm, &(MemPtr->StdHeader)); |
| // Assert ODT pins for write leveling |
| NBPtr->SetBitField (NBPtr, BFWrLvOdtEn, 1); |
| |
| // Wait 10 MEMCLKs to allow for ODT signal settling. |
| NBPtr->WaitXMemClks (NBPtr, 10); |
| |
| IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tWrtLvTrEn = 1\n"); |
| // Program F2x[1, 0]9C_x08[WrtLlTrEn]=1. |
| NBPtr->SetBitField (NBPtr, BFWrtLvTrEn, 1); |
| |
| // Wait 200 MEMCLKs. |
| NBPtr->WaitXMemClks (NBPtr, 200); |
| |
| // Program F2x[1, 0]9C_x08[WrtLlTrEn]=0. |
| NBPtr->SetBitField (NBPtr, BFWrtLvTrEn, 0); |
| |
| // Read from registers F2x[1, 0]9C_x[51:50] and F2x[1, 0]9C_x52 to get the gross and fine Delay settings |
| // for the target Dimm and save these values. |
| IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t PRE: "); |
| for (ByteLane = 0; ByteLane < (MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) { |
| // This includes ECC as byte 8 |
| Seed = NBPtr->ChannelPtr->WrDqsDlys[(Dimm * TechPtr->DlyTableWidth ()) + ByteLane]; |
| Delay = (UINT8)NBPtr->GetTrainDly (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (Dimm, ByteLane)); |
| IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", Delay); |
| |
| TechPtr->Bytelane = ByteLane; |
| TechPtr->TargetDIMM = Dimm; |
| NBPtr->FamilySpecificHook[TrainWlPerNibbleAdjustWLDly] (NBPtr, &Delay); |
| |
| if (NBPtr->IsSupported[WLSeedAdjust]) { |
| // Recover WrDqsGrossDly: |
| // WrDqsGrossDly = SeedGross + PhRecGrossDlyByte - SeedPreGross |
| if ((Seed & 0x20) != 0) { |
| // If (SeedGross is odd) then SeedPreGross = 1 |
| if ((NBPtr->IsSupported[WLNegativeDelay]) && ((Seed & 0x80) != 0)) { |
| // If the seed was negative, save the most negative delay in WLCriticalDelay |
| TechPtr->WLCriticalDelay = MIN (TechPtr->WLCriticalDelay, (INT16)Delay - 0x40); |
| Delay -= 0x40; |
| } else { |
| Delay += (Seed & 0xE0) - 0x20; |
| } |
| } else { |
| // If (SeedGross is even) then SeedPreGross = 2 |
| if (((Seed & 0xE0) == 0) && (Delay < 0x40)) { |
| // If SeedGross is 0 and PhRecGrossDlyByte is less than SeedPreGross, |
| // we have a negative result and need to program the delay to 0 |
| if (NBPtr->IsSupported[WLNegativeDelay]) { |
| // |
| // Save the lowest negative delay value across all Dimms and Bytelanes |
| // |
| TechPtr->WLCriticalDelay = MIN (TechPtr->WLCriticalDelay, (INT16)Delay - 0x40); |
| Delay -= 0x40; |
| } else { |
| Delay = 0; |
| } |
| } else { |
| if (NBPtr->GetBitField (NBPtr, BFWrDqDqsEarly) != 0) { |
| Delay = Delay + (Seed & 0xE0); |
| Delay16 = Delay - 0x40; |
| Delay = (UINT8)Delay16; |
| TechPtr->WLCriticalDelay = MIN (TechPtr->WLCriticalDelay, Delay16); |
| } else { |
| Delay += (Seed & 0xE0) - 0x40; |
| } |
| } |
| } |
| } else if (((Seed >> 5) == 0) && ((Delay >> 5) == 3)) { |
| IDS_OPTION_HOOK (IDS_CHECK_NEGATIVE_WL, &Delay, &(TechPtr->NBPtr->MemPtr->StdHeader)); |
| // If seed has gross delay of 0 and PRE has gross delay of 3, |
| // then round the total delay of TxDqs to 0. |
| Delay = 0; |
| } |
| |
| if ((!NBPtr->IsSupported[WLNegativeDelay]) && ((Delay > (Seed + 0x20)) || (Seed > (Delay + 0x20)))) { |
| // |
| // If PRE comes back with more than Seed +/- 0x20, then this is an |
| // unexpected condition. Log the condition. |
| // |
| PutEventLog (AGESA_ERROR, MEM_ERROR_WL_PRE_OUT_OF_RANGE, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, ((Seed << 8) + Delay), &NBPtr->MemPtr->StdHeader); |
| } |
| NBPtr->SetTrainDly (NBPtr, AccessWrDqsDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), Delay); |
| NBPtr->ChannelPtr->WrDqsDlys[(Dimm * TechPtr->DlyTableWidth ()) + ByteLane] = Delay; |
| } |
| |
| IDS_HDT_CONSOLE_DEBUG_CODE ( |
| IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\tWrDqs: "); |
| for (ByteLane = 0; ByteLane < (MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) { |
| IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", NBPtr->ChannelPtr->WrDqsDlys[(Dimm * TechPtr->DlyTableWidth ()) + ByteLane]); |
| } |
| IDS_HDT_CONSOLE (MEM_FLOW, "\n\n"); |
| ); |
| |
| // Disable write leveling ODT pins |
| NBPtr->SetBitField (NBPtr, BFWrLvOdtEn, 0); |
| |
| // Wait 10 MEMCLKs to allow for ODT signal settling. |
| NBPtr->WaitXMemClks (NBPtr, 10); |
| |
| } |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * This function programs register after Phy assisted training is finish. |
| * |
| * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK |
| * |
| * @return TRUE - No fatal error occurs. |
| * @return FALSE - Fatal error occurs. |
| */ |
| |
| BOOLEAN |
| MemTExitPhyAssistedTrainingClient3 ( |
| IN OUT MEM_TECH_BLOCK *TechPtr |
| ) |
| { |
| MEM_NB_BLOCK *NBPtr; |
| UINT8 Dct; |
| UINT8 ChipSel; |
| NBPtr = TechPtr->NBPtr; |
| |
| NBPtr->FamilySpecificHook[ReEnablePhyComp] (NBPtr, NBPtr); |
| NBPtr->BrdcstSet (NBPtr, BFDisDllShutdownSR, 1); |
| NBPtr->BrdcstSet (NBPtr, BFEnterSelfRef, 1); |
| NBPtr->PollBitField (NBPtr, BFEnterSelfRef, 0, PCI_ACCESS_TIMEOUT, TRUE); |
| IDS_HDT_CONSOLE (MEM_FLOW, "\tMemClkAlign = 2\n"); |
| NBPtr->BrdcstSet (NBPtr, BFExitSelfRef, 1); |
| NBPtr->PollBitField (NBPtr, BFExitSelfRef, 0, PCI_ACCESS_TIMEOUT, TRUE); |
| if (NBPtr->IsSupported[SetDllShutDown]) { |
| NBPtr->BrdcstSet (NBPtr, BFDisDllShutdownSR, 0); |
| } |
| |
| // Calculate Max Latency for both channels to prepare for position training |
| for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { |
| IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct); |
| NBPtr->SwitchDCT (NBPtr, Dct); |
| if (TechPtr->FindMaxDlyForMaxRdLat (TechPtr, &ChipSel)) { |
| NBPtr->SetMaxLatency (NBPtr, TechPtr->MaxDlyForMaxRdLat); |
| } |
| } |
| return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL); |
| } |