src/vendorcode/amd/agesa/f15tn/Proc/Mem/Main/mmLvDdr3.c

/* $NoKeywords:$ */
/**
 * @file
 *
 * mmLvDdr3.c
 *
 * Main Memory Feature implementation file for low voltage DDR3 support
 *
 * @xrefitem bom "File Content Label" "Release Content"
 * @e project: AGESA
 * @e sub-project: (Mem/Main)
 * @e \$Revision: 63425 $ @e \$Date: 2011-12-22 11:24:10 -0600 (Thu, 22 Dec 2011) $
 *
 **/
/*****************************************************************************
*
* Copyright 2008 - 2012 ADVANCED MICRO DEVICES, INC.  All Rights Reserved.
*
* AMD is granting you permission to use this software (the Materials)
* pursuant to the terms and conditions of your Software License Agreement
* with AMD.  This header does *NOT* give you permission to use the Materials
* or any rights under AMD's intellectual property.  Your use of any portion
* of these Materials shall constitute your acceptance of those terms and
* conditions.  If you do not agree to the terms and conditions of the Software
* License Agreement, please do not use any portion of these Materials.
*
* CONFIDENTIALITY:  The Materials and all other information, identified as
* confidential and provided to you by AMD shall be kept confidential in
* accordance with the terms and conditions of the Software License Agreement.
*
* LIMITATION OF LIABILITY: THE MATERIALS AND ANY OTHER RELATED INFORMATION
* PROVIDED TO YOU BY AMD ARE PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED
* WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO WARRANTIES OF
* MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY PARTICULAR PURPOSE,
* OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR USAGE OF TRADE.
* IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY DAMAGES WHATSOEVER
* (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS
* INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF AMD'S NEGLIGENCE,
* GROSS NEGLIGENCE, THE USE OF OR INABILITY TO USE THE MATERIALS OR ANY OTHER
* RELATED INFORMATION PROVIDED TO YOU BY AMD, EVEN IF AMD HAS BEEN ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGES.  BECAUSE SOME JURISDICTIONS PROHIBIT THE
* EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES,
* THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
*
* AMD does not assume any responsibility for any errors which may appear in
* the Materials or any other related information provided to you by AMD, or
* result from use of the Materials or any related information.
*
* You agree that you will not reverse engineer or decompile the Materials.
*
* NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any
* further information, software, technical information, know-how, or show-how
* available to you.  Additionally, AMD retains the right to modify the
* Materials at any time, without notice, and is not obligated to provide such
* modified Materials to you.
*
* U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with
* "RESTRICTED RIGHTS." Use, duplication, or disclosure by the Government is
* subject to the restrictions as set forth in FAR 52.227-14 and
* DFAR252.227-7013, et seq., or its successor.  Use of the Materials by the
* Government constitutes acknowledgement of AMD's proprietary rights in them.
*
* EXPORT ASSURANCE:  You agree and certify that neither the Materials, nor any
* direct product thereof will be exported directly or indirectly, into any
* country prohibited by the United States Export Administration Act and the
* regulations thereunder, without the required authorization from the U.S.
* government nor will be used for any purpose prohibited by the same.
* ***************************************************************************
*
*/

/*
 *----------------------------------------------------------------------------
 *                                MODULES USED
 *
 *----------------------------------------------------------------------------
 */


#include "AGESA.h"
#include "Ids.h"
#include "amdlib.h"
#include "OptionMemory.h"
#include "mm.h"
#include "mn.h"
#include "mu.h"
#include "mmlvddr3.h"
#include "GeneralServices.h"
#include "PlatformMemoryConfiguration.h"
#include "Filecode.h"
CODE_GROUP (G1_PEICC)
RDATA_GROUP (G1_PEICC)

#define FILECODE PROC_MEM_MAIN_MMLVDDR3_FILECODE

extern MEM_FEAT_BLOCK_MAIN MemFeatMain;
/*----------------------------------------------------------------------------
 *                        PROTOTYPES OF LOCAL FUNCTIONS
 *
 *----------------------------------------------------------------------------
 */
BOOLEAN
MemMLvDdr3 (
  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
  );

/*-----------------------------------------------------------------------------
*                                EXPORTED FUNCTIONS
*
*-----------------------------------------------------------------------------
*/

/* -----------------------------------------------------------------------------*/
/**
 *
 *  Find the common supported voltage on all nodes.
 *
 *     @param[in,out]   *MemMainPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
 *
 *     @return          TRUE -  No fatal error occurs.
 *     @return          FALSE - Fatal error occurs.
 */
BOOLEAN
MemMLvDdr3 (
  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
  )
{
  UINT8   Node;
  BOOLEAN RetVal;
  BOOLEAN SecondLoop;
  MEM_NB_BLOCK  *NBPtr;
  MEM_PARAMETER_STRUCT *ParameterPtr;
  MEM_SHARED_DATA *mmSharedPtr;

  NBPtr = MemMainPtr->NBPtr;
  mmSharedPtr = MemMainPtr->mmSharedPtr;
  ParameterPtr = MemMainPtr->MemPtr->ParameterListPtr;
  mmSharedPtr->VoltageMap = 0xFF;
  SecondLoop = FALSE;
  RetVal = TRUE;

  for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
    NBPtr[Node].FeatPtr->LvDdr3 (&NBPtr[Node]);
    // Check if there is no common supported voltage
    if ((mmSharedPtr->VoltageMap == 0) && !SecondLoop) {
      // restart node loop by setting node to 0xFF
      Node = 0xFF;
      SecondLoop = TRUE;
    }
  }

  if (mmSharedPtr->VoltageMap == 0) {
    IDS_HDT_CONSOLE (MEM_FLOW, "\nNo commonly supported VDDIO is found.\n");
    PutEventLog (AGESA_WARNING, MEM_WARNING_NO_COMMONLY_SUPPORTED_VDDIO, 0, 0, 0, 0, &(NBPtr[BSP_DIE].MemPtr->StdHeader));
    SetMemError (AGESA_WARNING, NBPtr[BSP_DIE].MCTPtr);
    // When there is no commonly supported VDDIO, use 1.35V as the temporal VDDIO
    ParameterPtr->DDR3Voltage = VOLT1_35;
  } else {
    IDS_HDT_CONSOLE (MEM_FLOW, "\nCommonly supported VDDIO is: %s%s%s.\n", ((mmSharedPtr->VoltageMap & 1) != 0) ? "1.5V, " : "", ((mmSharedPtr->VoltageMap & 2) != 0) ? "1.35V, " : "", ((mmSharedPtr->VoltageMap & 4) != 0) ? "1.25V" : "");
    ParameterPtr->DDR3Voltage = CONVERT_ENCODED_TO_VDDIO (LibAmdBitScanReverse (mmSharedPtr->VoltageMap));
  }

  for (Node = 0; Node < MemMainPtr->DieCount; Node ++) {
    // Check if the voltage needs force to 1.5V
    NBPtr[Node].FamilySpecificHook[ForceLvDimmVoltage] (&NBPtr[Node], MemMainPtr);

    RetVal &= (BOOLEAN) (NBPtr[Node].MCTPtr->ErrCode < AGESA_FATAL);
  }

  return RetVal;
}

/* -----------------------------------------------------------------------------*/
/**
 *
 *  Find the common supported voltage on all nodes, taken into account of the
 *  user option for performance and power saving.
 *
 *     @param[in,out]   *MemMainPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
 *
 *     @return          TRUE -  No fatal error occurs.
 *     @return          FALSE - Fatal error occurs.
 */
BOOLEAN
MemMLvDdr3PerformanceEnhPre (
  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
  )
{
  UINT8 Node;
  BOOLEAN RetVal;
  DIMM_VOLTAGE VDDIO;
  MEM_NB_BLOCK *NBPtr;
  MEM_PARAMETER_STRUCT *ParameterPtr;
  MEM_SHARED_DATA *mmSharedPtr;
  PLATFORM_POWER_POLICY PowerPolicy;
  UINT8 *PowerPolicyPtr;

  NBPtr = MemMainPtr->NBPtr;
  mmSharedPtr = MemMainPtr->mmSharedPtr;
  ParameterPtr = MemMainPtr->MemPtr->ParameterListPtr;
  PowerPolicyPtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MEMORY_POWER_POLICY, 0, 0, 0, NULL, NULL);
  if (PowerPolicyPtr != NULL) {
    PowerPolicy = (PLATFORM_POWER_POLICY) *PowerPolicyPtr;
    IDS_HDT_CONSOLE (MEM_FLOW, "\nPlatform overrides memory power policy");
  } else {
    PowerPolicy = MemMainPtr->MemPtr->PlatFormConfig->PlatformProfile.PlatformPowerPolicy;
  }

  IDS_OPTION_HOOK (IDS_MEMORY_POWER_POLICY, &PowerPolicy, &NBPtr->MemPtr->StdHeader);
  IDS_HDT_CONSOLE (MEM_FLOW, (PowerPolicy == Performance) ? "\nMaximize Performance\n" : "\nMaximize Battery Life\n");

  if (ParameterPtr->DDR3Voltage != VOLT_INITIAL) {
    mmSharedPtr->VoltageMap = VDDIO_DETERMINED;
    PutEventLog (AGESA_WARNING, MEM_WARNING_INITIAL_DDR3VOLT_NONZERO, 0, 0, 0, 0, &(NBPtr[BSP_DIE].MemPtr->StdHeader));
    SetMemError (AGESA_WARNING, NBPtr[BSP_DIE].MCTPtr);
    IDS_HDT_CONSOLE (MEM_FLOW, "Warning: Initial Value for VDDIO has been changed.\n");
    RetVal = TRUE;
  } else {
    RetVal = MemMLvDdr3 (MemMainPtr);

    VDDIO = ParameterPtr->DDR3Voltage;
    if (NBPtr->IsSupported[PerformanceOnly] || ((PowerPolicy == Performance) && (mmSharedPtr->VoltageMap != 0))) {
      // When there is no commonly supported voltage, do not optimize performance
      // For cases where we can maximize performance, do the following
      // When VDDIO is enforced, DDR3Voltage will be overriden by specific VDDIO
      // So cases with DDR3Voltage left to be VOLT_UNSUPPORTED will be open to maximizing performance.
      ParameterPtr->DDR3Voltage = VOLT_UNSUPPORTED;
    }

    IDS_OPTION_HOOK (IDS_ENFORCE_VDDIO, &(ParameterPtr->DDR3Voltage), &NBPtr->MemPtr->StdHeader);

    if (ParameterPtr->DDR3Voltage != VOLT_UNSUPPORTED) {
      // When Voltage is already determined, do not have further process to choose maximum frequency to optimize performance
      mmSharedPtr->VoltageMap = VDDIO_DETERMINED;
      IDS_HDT_CONSOLE (MEM_FLOW, "VDDIO is determined. No further optimization will be done.\n");
    } else {
      for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
        NBPtr[Node].MaxFreqVDDIO[VOLT1_5_ENCODED_VAL] = UNSUPPORTED_DDR_FREQUENCY;
        NBPtr[Node].MaxFreqVDDIO[VOLT1_35_ENCODED_VAL] = UNSUPPORTED_DDR_FREQUENCY;
        NBPtr[Node].MaxFreqVDDIO[VOLT1_25_ENCODED_VAL] = UNSUPPORTED_DDR_FREQUENCY;
      }
      // Reprogram the leveling result as temporal candidate
      ParameterPtr->DDR3Voltage = VDDIO;
    }
  }

  ASSERT (ParameterPtr->DDR3Voltage != VOLT_UNSUPPORTED);
  return RetVal;
}

/* -----------------------------------------------------------------------------*/
/**
 *
 *  Finalize the VDDIO for the board for performance enhancement.
 *
 *     @param[in,out]   *MemMainPtr   - Pointer to the MEM_MAIN_DATA_BLOCK
 *
 *     @return          TRUE -  No fatal error occurs.
 *     @return          FALSE - Fatal error occurs.
 */
BOOLEAN
MemMLvDdr3PerformanceEnhFinalize (
  IN OUT   MEM_MAIN_DATA_BLOCK *MemMainPtr
  )
{
  UINT8 Dct;
  UINT8 Node;
  UINT8 NodeCnt[VOLT1_25 + 1];
  UINT8 MaxCnt;
  MEM_NB_BLOCK *NBPtr;
  MEM_PARAMETER_STRUCT *ParameterPtr;
  MEM_SHARED_DATA *mmSharedPtr;
  UINT8 CurrentVoltage;
  DIMM_VOLTAGE Voltage;
  MEMORY_BUS_SPEED HighestFreq;

  ParameterPtr = MemMainPtr->MemPtr->ParameterListPtr;
  mmSharedPtr = MemMainPtr->mmSharedPtr;
  NBPtr = MemMainPtr->NBPtr;

  LibAmdMemFill (NodeCnt, 0, VOLT1_25_ENCODED_VAL + 1, &NBPtr->MemPtr->StdHeader);
  if (mmSharedPtr->VoltageMap != VDDIO_DETERMINED) {
    Voltage = ParameterPtr->DDR3Voltage;
    IDS_HDT_CONSOLE (MEM_FLOW, "\nSearching for VDDIO that can maximize frequency: \n");
    for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
      HighestFreq = 0;
      // Find out what the highest frequency that can be reached is on this node across different voltage.
      for (CurrentVoltage = VOLT1_5_ENCODED_VAL; CurrentVoltage <= VOLT1_25_ENCODED_VAL; CurrentVoltage ++) {
        if (HighestFreq < NBPtr[Node].MaxFreqVDDIO[CurrentVoltage]) {
          HighestFreq = NBPtr[Node].MaxFreqVDDIO[CurrentVoltage];
        }
      }
      IDS_HDT_CONSOLE (MEM_FLOW, "Node%d: 1.5V -> %dMHz, 1.35V -> %dMHz, 1.25V -> %dMHz\n", Node, NBPtr[Node].MaxFreqVDDIO[VOLT1_5_ENCODED_VAL], NBPtr[Node].MaxFreqVDDIO[VOLT1_35_ENCODED_VAL], NBPtr[Node].MaxFreqVDDIO[VOLT1_25_ENCODED_VAL]);
      // Figure out what voltage we can have when attaining the highest frequency.
      for (CurrentVoltage = VOLT1_5_ENCODED_VAL; CurrentVoltage <= VOLT1_25_ENCODED_VAL; CurrentVoltage ++) {
        if (NBPtr[Node].MaxFreqVDDIO[CurrentVoltage] == HighestFreq) {
          NodeCnt[CurrentVoltage] ++;
        }
      }
    }
    IDS_HDT_CONSOLE (MEM_FLOW, "Number of nodes that can run at maximize performance: 1.5V -> %d Nodes 1.35V -> %d Nodes 1.25V -> %d Nodes.\n", NodeCnt[VOLT1_5_ENCODED_VAL], NodeCnt[VOLT1_35_ENCODED_VAL], NodeCnt[VOLT1_25_ENCODED_VAL]);
    MaxCnt = 0;
    // Use the VDDIO at which most nodes can run at higher frequency
    for (CurrentVoltage = VOLT1_5_ENCODED_VAL; CurrentVoltage <= VOLT1_25_ENCODED_VAL; CurrentVoltage ++) {
      if (MaxCnt <= NodeCnt[CurrentVoltage]) {
        MaxCnt = NodeCnt[CurrentVoltage];
        ParameterPtr->DDR3Voltage = CONVERT_ENCODED_TO_VDDIO (CurrentVoltage);
      }
    }

    ASSERT (ParameterPtr->DDR3Voltage != VOLT_UNSUPPORTED);

    mmSharedPtr->VoltageMap = VDDIO_DETERMINED;
    if (Voltage != ParameterPtr->DDR3Voltage) {
      // Finalize frequency with updated finalized VDDIO
      for (Node = 0; Node < MemMainPtr->DieCount; Node++) {
        // Need to re-sync target speed and different VDDIO may cause different settings
        NBPtr[Node].TechPtr->SpdGetTargetSpeed (NBPtr[Node].TechPtr);
        for (Dct = 0; Dct < NBPtr[Node].DctCount; Dct++) {
          NBPtr[Node].SwitchDCT (&(NBPtr[Node]), Dct);
          if (NBPtr[Node].DCTPtr->Timings.CsEnabled != 0) {
            if (!NBPtr[Node].PlatformSpec (&(NBPtr[Node]))) {
              return FALSE;
            }
          }
        }
      }
    }
  }
  return TRUE;
}