| /* $NoKeywords:$ */ |
| /** |
| * @file |
| * |
| * mrtrci3.c |
| * |
| * Technology Control word initialization for DDR3 Recovery |
| * |
| * @xrefitem bom "File Content Label" "Release Content" |
| * @e project: AGESA |
| * @e sub-project: (Proc/Recovery/Mem) |
| * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 02:16:51 -0700 (Wed, 22 Dec 2010) $ |
| * |
| **/ |
| /***************************************************************************** |
| * |
| * Copyright (C) 2012 Advanced Micro Devices, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Advanced Micro Devices, Inc. nor the names of |
| * its contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * *************************************************************************** |
| * |
| */ |
| |
| /* |
| *---------------------------------------------------------------------------- |
| * MODULES USED |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| |
| |
| #include "AGESA.h" |
| #include "OptionMemory.h" |
| #include "Ids.h" |
| #include "mm.h" |
| #include "mn.h" |
| #include "mru.h" |
| #include "mt.h" |
| #include "Filecode.h" |
| CODE_GROUP (G2_PEI) |
| RDATA_GROUP (G2_PEI) |
| |
| #define FILECODE PROC_RECOVERY_MEM_TECH_DDR3_MRTRCI3_FILECODE |
| /*---------------------------------------------------------------------------- |
| * DEFINITIONS AND MACROS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| /*---------------------------------------------------------------------------- |
| * TYPEDEFS AND STRUCTURES |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| /*---------------------------------------------------------------------------- |
| * PROTOTYPES OF LOCAL FUNCTIONS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| UINT8 |
| STATIC |
| MemRecTGetCtlWord3 ( |
| IN OUT MEM_TECH_BLOCK *TechPtr, |
| IN UINT8 CtrlWordNum |
| ); |
| |
| VOID |
| STATIC |
| MemRecTSendCtlWord3 ( |
| IN OUT MEM_TECH_BLOCK *TechPtr, |
| IN UINT8 CmdNum, |
| IN UINT8 Value |
| ); |
| |
| /*---------------------------------------------------------------------------- |
| * EXPORTED FUNCTIONS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * This function sends control words |
| * |
| * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK |
| * |
| * @return pDCT->Timings.TrwtTO updated |
| */ |
| |
| VOID |
| MemRecTDramControlRegInit3 ( |
| IN OUT MEM_TECH_BLOCK *TechPtr |
| ) |
| { |
| UINT8 RCNum; |
| UINT8 Data; |
| |
| MEM_DATA_STRUCT *MemPtr; |
| MEM_NB_BLOCK *NBPtr; |
| |
| NBPtr = TechPtr->NBPtr; |
| MemPtr = NBPtr->MemPtr; |
| |
| // wait 8us TACT must be changed to optimize to 8 MEM CLKs |
| // and wait 6us for PLL LOCK |
| MemRecUWait10ns (80 + 60, MemPtr); |
| |
| // 2. Program F2x[1, 0]A8[CtrlWordCS]=bit mask for target chip selects. |
| NBPtr->SetBitField (NBPtr, BFCtrlWordCS, 3 << (NBPtr->DimmToBeUsed << 1)); |
| |
| for (RCNum = 0; RCNum <= 15; RCNum++) { |
| // wait 8us for TMRD, must be changed to optimize to 8 MEM CLKs |
| MemRecUWait10ns (80, MemPtr); |
| |
| if ((RCNum != 6) && (RCNum != 7)) { |
| Data = MemRecTGetCtlWord3 (TechPtr, RCNum); |
| MemRecTSendCtlWord3 (TechPtr, RCNum, Data); |
| } |
| } |
| |
| MemRecUWait10ns (60, MemPtr); // wait 6us for TSTAB |
| } |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * This function calculates the ControlRC value |
| * |
| * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK |
| * @param[in] CtrlWordNum - control Word number. |
| * |
| * @return Control Word value |
| */ |
| |
| UINT8 |
| STATIC |
| MemRecTGetCtlWord3 ( |
| IN OUT MEM_TECH_BLOCK *TechPtr, |
| IN UINT8 CtrlWordNum |
| ) |
| { |
| UINT8 Data; |
| |
| CH_DEF_STRUCT *ChannelPtr; |
| |
| ChannelPtr = TechPtr->NBPtr->ChannelPtr; |
| |
| Data = 0; //Default value for all control words is 0 |
| switch (CtrlWordNum) { |
| case 0: |
| Data = 0x02; // DA4=1 |
| break; |
| case 1: |
| Data = 0x0C; // if single rank, set DBA1 and DBA0 |
| break; |
| case 3: |
| Data = ChannelPtr->CtrlWrd03[TechPtr->NBPtr->DimmToBeUsed]; |
| break; |
| case 4: |
| Data = ChannelPtr->CtrlWrd04[TechPtr->NBPtr->DimmToBeUsed]; |
| break; |
| case 5: |
| Data = ChannelPtr->CtrlWrd05[TechPtr->NBPtr->DimmToBeUsed]; |
| break; |
| case 9: |
| Data = 0x0D; |
| break; |
| default:; |
| } |
| |
| return (Data&0x0F); |
| } |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * This function sends control word command |
| * |
| * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK |
| * @param[in] CmdNum - control number. |
| * @param[in] Value - value to send |
| * |
| */ |
| |
| VOID |
| STATIC |
| MemRecTSendCtlWord3 ( |
| IN OUT MEM_TECH_BLOCK *TechPtr, |
| IN UINT8 CmdNum, |
| IN UINT8 Value |
| ) |
| { |
| MEM_NB_BLOCK *NBPtr; |
| |
| ASSERT (CmdNum < 16); |
| ASSERT (Value < 16); |
| |
| NBPtr = TechPtr->NBPtr; |
| |
| // 1. Program MrsBank and MrsAddress. |
| // n = [BA2, A2, A1, A0]. |
| // data = [BA1, BA0, A4, A3]. |
| // Set all other bits in MrsAddress to zero. |
| // |
| NBPtr->SetBitField (NBPtr, BFMrsBank, ((CmdNum&8) >> 1) | (Value >> 2)); |
| NBPtr->SetBitField (NBPtr, BFMrsAddress, ((Value&3) << 3) | (CmdNum&7)); |
| IDS_HDT_CONSOLE (MEM_FLOW, "\t\tCS%d RC%02d %04x\n", |
| (NBPtr->GetBitField (NBPtr, BFDramInitRegReg) >> 20) & 0xF, |
| ((NBPtr->GetBitField (NBPtr, BFDramInitRegReg) >> 15) & 8) | |
| (NBPtr->GetBitField (NBPtr, BFDramInitRegReg) & 7), |
| ((NBPtr->GetBitField (NBPtr, BFDramInitRegReg) >> 14) & 0xC) | |
| ((NBPtr->GetBitField (NBPtr, BFDramInitRegReg) >> 3) & 3)); |
| |
| // 2.Set SendCtrlWord=1 |
| NBPtr->SetBitField (NBPtr, BFSendCtrlWord, 1); |
| // 3.Wait for BFSendCtrlWord=0 |
| while (NBPtr->GetBitField (NBPtr, BFSendCtrlWord) != 0) {} |
| } |