blob: 075aae17bebd841254b8d94592048ed303754eb6 [file] [log] [blame]
/* $NoKeywords:$ */
/*
* @file
*
* mauon3.c
*
* Platform specific settings for ON DDR3 unbuffered dimms
*
* @xrefitem bom "File Content Label" "Release Content"
* @e project: AGESA
* @e sub-project: (Mem/Ardk/ON)
* @e \$Revision: 38442 $ @e \$Date: 2010-09-24 06:39:57 +0800 (Fri, 24 Sep 2010) $
*
**/
/*
*****************************************************************************
*
* Copyright (c) 2011, Advanced Micro Devices, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Advanced Micro Devices, Inc. nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* ***************************************************************************
*
*/
/* This file contains routine that add platform specific support AM3 */
#include "AGESA.h"
#include "PlatformMemoryConfiguration.h"
#include "mport.h"
#include "ma.h"
#include "Ids.h"
#include "cpuFamRegisters.h"
#include "Filecode.h"
#define FILECODE PROC_MEM_ARDK_ON_MAUON3_FILECODE
/*----------------------------------------------------------------------------
* DEFINITIONS AND MACROS
*
*----------------------------------------------------------------------------
*/
/*----------------------------------------------------------------------------
* TYPEDEFS AND STRUCTURES
*
*----------------------------------------------------------------------------
*/
/*----------------------------------------------------------------------------
* PROTOTYPES OF LOCAL FUNCTIONS
*
*----------------------------------------------------------------------------
*/
/*
*-----------------------------------------------------------------------------
* EXPORTED FUNCTIONS
*
*-----------------------------------------------------------------------------
*/
STATIC CONST UINT8 ROMDATA OnUDdr3CLKDis[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00};
STATIC CONST UINT8 ROMDATA OnUDdr3CKETri[] = {0xFF, 0xFF};
STATIC CONST UINT8 ROMDATA OnUDdr3ODTTri[] = {0x01, 0x02, 0x04, 0x08};
STATIC CONST UINT8 ROMDATA OnUDdr3CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00};
/* -----------------------------------------------------------------------------*/
/**
*
* This is function sets the platform specific settings for ON DDR3 Unbuffered dimms
*
*
* @param[in,out] *MemData Pointer to MEM_DATA_STRUCTURE
* @param[in] SocketID Socket number
* @param[in,out] *CurrentChannel Pointer to CH_DEF_STRUCT
*
* @return AGESA_SUCCESS
* @return CurrentChannel->MemClkDisMap Points this pointer to LN MemClkDis table
* @return CurrentChannel->ChipSelTriMap Points this pointer to LN CS table
* @return CurrentChannel->CKETriMap Points this pointer to LN ODT table
* @return CurrentChannel->ODTTriMap Points this pointer to LN CKE table
* @return CurrentChannel->DctEccDQSLike Indicates the bytes that should be averaged for ECC
* @return CurrentChannel->DctEccDQSScale Indicates the scale that should be used for Averaging ECC byte
* @return CurrentChannel->DctAddrTmg Address Command Timing Settings for specified channel
* @return CurrentChannel->DctOdcCtl Drive Strength settings for specified channel
* @return CurrentChannel->SlowMode Slow Mode
*
*/
AGESA_STATUS
MemAGetPsCfgUON3 (
IN OUT MEM_DATA_STRUCT *MemData,
IN UINT8 SocketID,
IN OUT CH_DEF_STRUCT *CurrentChannel
)
{
CONST ADV_PSCFG_ENTRY PSCfg[] = {
{DDR800_FREQUENCY, SR_DIMM0 + SR_DIMM1, 0x00000000, 0x00112223, 1},
{DDR800_FREQUENCY, DR_DIMM0 + DR_DIMM1, 0x003B0000, 0x00112223, 1},
{DDR800_FREQUENCY, ANY_, 0x00390039, 0x20222323, 2},
{DDR1066_FREQUENCY, SR_DIMM0 + SR_DIMM1, 0x00000000, 0x10112223, 1},
{DDR1066_FREQUENCY, DR_DIMM0 + DR_DIMM1, 0x00380000, 0x10112223, 1},
{DDR1066_FREQUENCY, ANY_, 0x00350037, 0x30222323, 2},
{DDR1333_FREQUENCY, SR_DIMM0 + SR_DIMM1, 0x00000000, 0x30112223, 1},
{DDR1333_FREQUENCY, DR_DIMM0 + DR_DIMM1, 0x00360000, 0x30112223, 1},
{DDR1333_FREQUENCY, ANY_, 0x00000035, 0x30222323, 2}
};
//
// DIMM ODT Pattern
//
// Dimm Config ,
// Fn2_F4 180, Fn2_F4 181, Fn2_F4 182, Fn2_F4 183, # Dimms to match
//
STATIC CONST ADV_PSCFG_ODT_ENTRY PSCfgDIMMsODT[] = {
{SR_DIMM0, \
0x00000000, 0x00000000, 0x00000001, 0x00000000, 1},
{DR_DIMM0, \
0x00000000, 0x00000000, 0x00000201, 0x00000000, 1},
{SR_DIMM1, \
0x00000000, 0x00000000, 0x00040000, 0x00000000, 1},
{DR_DIMM1, \
0x00000000, 0x00000000, 0x08040000, 0x00000000, 1},
{SR_DIMM0 + DR_DIMM0 + SR_DIMM1 + DR_DIMM1, \
0x01010404, 0x00000000, 0x09050605, 0x00000000, 2}
};
UINT16 i;
UINT16 j;
UINT8 Dimms;
UINT16 Speed;
UINT16 DIMMRankType;
UINT16 _DIMMRankType;
UINT32 AddrTmgCTL;
UINT32 DctOdcCtl;
UINT8 PhyWLODT[4];
UINT32 PhyRODTCS;
UINT32 PhyWODTCS;
BOOLEAN SlowMode;
UINT8 DimmTpMatch;
ASSERT (MemData != 0);
ASSERT (CurrentChannel != 0);
AddrTmgCTL = 0;
DctOdcCtl = 0;
PhyWLODT[0] = 0x0F;
PhyWLODT[1] = 0x0F;
PhyWLODT[2] = 0x0F;
PhyWLODT[3] = 0x0F;
PhyRODTCS = 0;
PhyWODTCS = 0;
if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & AMD_FAMILY_ON) == 0) {
return AGESA_UNSUPPORTED;
}
if (CurrentChannel->TechType != DDR3_TECHNOLOGY) {
return AGESA_UNSUPPORTED;
}
if ((CurrentChannel->RegDimmPresent != 0) || (CurrentChannel->SODimmPresent != 0)) {
return AGESA_UNSUPPORTED;
}
// Prepare inputs
Dimms = CurrentChannel->Dimms;
Speed = CurrentChannel->DCTPtr->Timings.Speed;
DIMMRankType = MemAGetPsRankType (CurrentChannel);
if ((Speed == DDR1333_FREQUENCY) && (Dimms == 2)) {
SlowMode = TRUE; // 2T
} else {
SlowMode = FALSE; // 1T
}
for (i = 0; i < GET_SIZE_OF (PSCfg); i++) {
if ((PSCfg[i].Dimms == ANY_) || (PSCfg[i].Dimms == Dimms)) {
if ((PSCfg[i].Speed == ANY_) || (PSCfg[i].Speed == Speed)) {
if ((PSCfg[i].Loads == ANY_) || ((PSCfg[i].Loads & DIMMRankType) != 0)) {
AddrTmgCTL = PSCfg[i].AddrTmg;
DctOdcCtl = PSCfg[i].Odc;
break;
}
}
}
}
ASSERT (i < GET_SIZE_OF (PSCfg));
//
// Programmable Dimm ODT
//
for (i = 0; i < GET_SIZE_OF (PSCfgDIMMsODT); i++) {
if (Dimms != PSCfgDIMMsODT[i].Dimms) {
continue;
}
DimmTpMatch = 0;
_DIMMRankType = DIMMRankType & PSCfgDIMMsODT[i].DIMMRankType;
for (j = 0; j < MAX_DIMMS_PER_CHANNEL; j++) {
if ((_DIMMRankType & (UINT16) 0x0F << (j << 2)) != 0) {
DimmTpMatch++;
}
}
if (DimmTpMatch == PSCfgDIMMsODT[i].Dimms) {
PhyRODTCS = PSCfgDIMMsODT[i].PhyRODTCSLow;
PhyWODTCS = PSCfgDIMMsODT[i].PhyWODTCSLow;
break;
}
}
//
//WL ODT
//
PhyWLODT[0] = (UINT8) (PhyWODTCS & 0x0F);
PhyWLODT[1] = (UINT8) ((PhyWODTCS >> 16) & 0x0F);
PhyWLODT[2] = PhyWLODT[3] = 0;
//
// Overrides and/or exceptions
//
CurrentChannel->MemClkDisMap = (UINT8 *) OnUDdr3CLKDis;
CurrentChannel->CKETriMap = (UINT8 *) OnUDdr3CKETri;
CurrentChannel->ODTTriMap = (UINT8 *) OnUDdr3ODTTri;
CurrentChannel->ChipSelTriMap = (UINT8 *) OnUDdr3CSTri;
CurrentChannel->DctEccDqsLike = 0x0403;
CurrentChannel->DctEccDqsScale = 0x70;
CurrentChannel->DctAddrTmg = AddrTmgCTL;
CurrentChannel->DctOdcCtl = DctOdcCtl;
CurrentChannel->PhyRODTCSLow = PhyRODTCS;
CurrentChannel->PhyWODTCSLow = PhyWODTCS;
for (i = 0; i < sizeof (CurrentChannel->PhyWLODT); i++) {
CurrentChannel->PhyWLODT[i] = PhyWLODT[i];
}
CurrentChannel->SlowMode = SlowMode;
return AGESA_SUCCESS;
}