blob: e8ca7d2ba9b890d221e09aa4fe8c1127cd571284 [file] [log] [blame]
/* $NoKeywords:$ */
/*
* @file
*
* masda2.c
*
* Platform specific settings for DA DDR2 SO-dimms
*
* @xrefitem bom "File Content Label" "Release Content"
* @e project: AGESA
* @e sub-project: (Mem/Ardk)
* @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $
*
**/
/*
*****************************************************************************
*
* Copyright (c) 2011, Advanced Micro Devices, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Advanced Micro Devices, Inc. nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* ***************************************************************************
*
*/
/* This file contains routine that add platform specific support S1g3 */
#include "AGESA.h"
#include "mport.h"
#include "PlatformMemoryConfiguration.h"
#include "ma.h"
#include "Ids.h"
#include "cpuFamRegisters.h"
#include "Filecode.h"
CODE_GROUP (G2_PEI)
RDATA_GROUP (G2_PEI)
#define FILECODE PROC_MEM_ARDK_DA_MASDA2_FILECODE
/*----------------------------------------------------------------------------
* DEFINITIONS AND MACROS
*
*----------------------------------------------------------------------------
*/
/*----------------------------------------------------------------------------
* TYPEDEFS AND STRUCTURES
*
*----------------------------------------------------------------------------
*/
/*----------------------------------------------------------------------------
* PROTOTYPES OF LOCAL FUNCTIONS
*
*----------------------------------------------------------------------------
*/
/*
*-----------------------------------------------------------------------------
* EXPORTED FUNCTIONS
*
*-----------------------------------------------------------------------------
*/
STATIC CONST UINT8 ROMDATA DASDdr2CLKDis[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
// Even chip select maps to M[B,A]_CKE[0]
// Odd chip select maps to M[B,A]_CKE[1]
STATIC CONST UINT8 ROMDATA DASDdr2CKETri[] = {0x55, 0xAA};
// Bit 0: M[B,A]0_ODT[0]
// Bit 1: M[B,A]1_ODT[0]
// Bit 2: M[B,A]0_ODT[1]
// Bit 3: M[B,A]1_ODT[1]
STATIC CONST UINT8 ROMDATA DASDdr2ODTTri[] = {0x01, 0x04, 0x02, 0x08};
// Bit 0: M[B,A]0_CS_H/L[0]
// Bit 1: M[B,A]0_CS_H/L[1]
// Bit 2: M[B,A]0_CS_H/L[2]
// Bit 3: M[B,A]0_CS_H/L[3]
STATIC CONST UINT8 ROMDATA DASDdr2CSTri[] = {0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00};
/* -----------------------------------------------------------------------------*/
/**
*
* This is function sets the platform specific settings for DA DDR2 SO-dimms
*
*
* @param[in,out] *MemData Pointer to MEM_DATA_STRUCTURE
* @param[in] SocketID Socket number
* @param[in,out] *CurrentChannel Pointer to CH_DEF_STRUCT
*
* @return AGESA_SUCCESS
* @return CurrentChannel->MemClkDisMap Points this pointer to RB MemClkDis table
* @return CurrentChannel->ChipSelTriMap Points this pointer to RB CS table
* @return CurrentChannel->CKETriMap Points this pointer to RB ODT table
* @return CurrentChannel->ODTTriMap Points this pointer to RB CKE table
* @return CurrentChannel->DctEccDQSLike Indicates the bytes that should be averaged for ECC
* @return CurrentChannel->DctEccDQSScale Indicates the scale that should be used for Averaging ECC byte
* @return CurrentChannel->DctAddrTmg Address Command Timing Settings for specified channel
* @return CurrentChannel->DctOdcCtl Drive Strength settings for specified channel
* @return CurrentChannel->SlowMode Slow Mode
*
*
*/
AGESA_STATUS
MemAGetPsCfgSDA2 (
IN OUT MEM_DATA_STRUCT *MemData,
IN UINT8 SocketID,
IN OUT CH_DEF_STRUCT *CurrentChannel
)
{
STATIC CONST PSCFG_ENTRY PSCfg[] = {
{DDR400_FREQUENCY, 0xFF, 0x002F2F2F, 0x10111222},
{DDR533_FREQUENCY, 0xFF, 0x002F2F2F, 0x10111222},
{DDR667_FREQUENCY, 0xFF, 0x002A2A2A, 0x10111222},
{DDR800_FREQUENCY, 0xFF, 0x002A2A2A, 0x10111222},
};
UINT16 i;
UINT8 Loads;
UINT8 Ranks;
UINT16 Speed;
UINT32 AddrTmgCTL;
UINT32 DctOdcCtl;
BOOLEAN SlowMode;
ASSERT (MemData != 0);
ASSERT (CurrentChannel != 0);
AddrTmgCTL = 0;
DctOdcCtl = 0;
if ((CurrentChannel->MCTPtr->LogicalCpuid.Family & (AMD_FAMILY_10_DA | AMD_FAMILY_10_BL)) == 0) {
return AGESA_UNSUPPORTED;
}
if (CurrentChannel->TechType != DDR2_TECHNOLOGY) {
return AGESA_UNSUPPORTED;
}
if (CurrentChannel->SODimmPresent != CurrentChannel->ChDimmValid) {
return AGESA_UNSUPPORTED;
}
// Prepare inputs
Loads = CurrentChannel->Loads;
Ranks = CurrentChannel->Ranks;
Speed = CurrentChannel->DCTPtr->Timings.Speed;
SlowMode = FALSE; // 1T
for (i = 0; i < GET_SIZE_OF (PSCfg); i++) {
if (Speed == PSCfg[i].Speed) {
if (Loads <= PSCfg[i].Loads) {
AddrTmgCTL = PSCfg[i].AddrTmg;
DctOdcCtl = PSCfg[i].Odc;
break;
}
}
}
ASSERT (i < GET_SIZE_OF (PSCfg));
//
// Overrides and/or exceptions
//
if (Loads == 16) {
if ((Speed == DDR533_FREQUENCY) && (Ranks == 2)) {
AddrTmgCTL = 0x002C2C2C;
} else if ((Speed == DDR667_FREQUENCY) && (Ranks == 1)) {
AddrTmgCTL = 0x00272727;
} else if ((Speed == DDR667_FREQUENCY) && (Ranks == 2)) {
AddrTmgCTL = 0x00002828;
SlowMode = TRUE; // 2T
} else if ((Speed == DDR800_FREQUENCY) && (Ranks == 1)) {
AddrTmgCTL = 0x00292929;
} else if ((Speed == DDR800_FREQUENCY) && (Ranks == 2)) {
AddrTmgCTL = 0x00002F2F;
SlowMode = TRUE; // 2T
}
}
CurrentChannel->MemClkDisMap = (UINT8 *) DASDdr2CLKDis;
CurrentChannel->CKETriMap = (UINT8 *) DASDdr2CKETri;
CurrentChannel->ODTTriMap = (UINT8 *) DASDdr2ODTTri;
CurrentChannel->ChipSelTriMap = (UINT8 *) DASDdr2CSTri;
CurrentChannel->DctAddrTmg = AddrTmgCTL;
CurrentChannel->DctOdcCtl = DctOdcCtl;
CurrentChannel->SlowMode = SlowMode;
return AGESA_SUCCESS;
}