| /* $NoKeywords:$ */ |
| /** |
| * @file |
| * |
| * mttoptsrc.c |
| * |
| * New Technology Software based DQS receiver enable training |
| * |
| * @xrefitem bom "File Content Label" "Release Content" |
| * @e project: AGESA |
| * @e sub-project: (Mem/Tech) |
| * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ |
| * |
| **/ |
| /***************************************************************************** |
| * |
| * Copyright (c) 2011, Advanced Micro Devices, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Advanced Micro Devices, Inc. nor the names of |
| * its contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * *************************************************************************** |
| * |
| */ |
| |
| /* |
| *---------------------------------------------------------------------------- |
| * MODULES USED |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| |
| |
| #include "AGESA.h" |
| #include "AdvancedApi.h" |
| #include "Ids.h" |
| #include "mm.h" |
| #include "mn.h" |
| #include "mu.h" |
| #include "mt.h" |
| #include "merrhdl.h" |
| #include "Filecode.h" |
| CODE_GROUP (G1_PEICC) |
| RDATA_GROUP (G1_PEICC) |
| |
| #define FILECODE PROC_MEM_TECH_MTTOPTSRC_FILECODE |
| /*---------------------------------------------------------------------------- |
| * DEFINITIONS AND MACROS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| /*---------------------------------------------------------------------------- |
| * TYPEDEFS AND STRUCTURES |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| /*---------------------------------------------------------------------------- |
| * PROTOTYPES OF LOCAL FUNCTIONS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| BOOLEAN |
| STATIC |
| MemTDqsTrainOptRcvrEnSw ( |
| IN OUT MEM_TECH_BLOCK *TechPtr, |
| IN UINT8 Pass |
| ); |
| |
| BOOLEAN |
| MemTNewRevTrainingSupport ( |
| IN OUT MEM_TECH_BLOCK *TechPtr |
| ) |
| { |
| return TRUE; |
| } |
| |
| /*---------------------------------------------------------------------------- |
| * EXPORTED FUNCTIONS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * This function executes first pass of receiver enable training for all dies |
| * |
| * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK |
| * |
| * @return TRUE - No fatal error occurs. |
| * @return FALSE - Fatal error occurs. |
| */ |
| |
| BOOLEAN |
| MemTTrainOptRcvrEnSwPass1 ( |
| IN OUT MEM_TECH_BLOCK *TechPtr |
| ) |
| { |
| return MemTDqsTrainOptRcvrEnSw (TechPtr, 1); |
| } |
| |
| /*---------------------------------------------------------------------------- |
| * LOCAL FUNCTIONS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| /* -----------------------------------------------------------------------------*/ |
| /** |
| * |
| * This function executes receiver enable training for a specific die |
| * |
| * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK |
| * @param[in] Pass - Pass of the receiver training |
| * |
| * @return TRUE - No fatal error occurs. |
| * @return FALSE - Fatal error occurs. |
| */ |
| BOOLEAN |
| STATIC |
| MemTDqsTrainOptRcvrEnSw ( |
| IN OUT MEM_TECH_BLOCK *TechPtr, |
| IN UINT8 Pass |
| ) |
| { |
| _16BYTE_ALIGN UINT8 PatternBuffer[6 * 64]; |
| UINT8 TestBuffer[256]; |
| UINT8 *PatternBufPtr[6]; |
| UINT8 *TempPtr; |
| UINT32 TestAddrRJ16[4]; |
| UINT32 TempAddrRJ16; |
| UINT32 RealAddr; |
| UINT16 CurTest[4]; |
| UINT8 Dct; |
| UINT8 Receiver; |
| UINT8 i; |
| UINT8 TimesFail; |
| UINT8 TimesRetrain; |
| UINT16 RcvrEnDly; |
| UINT16 MaxRcvrEnDly; |
| UINT16 RcvrEnDlyLimit; |
| UINT16 MaxDelayCha; |
| BOOLEAN IsDualRank; |
| BOOLEAN S0En; |
| BOOLEAN S1En; |
| |
| |
| MEM_DATA_STRUCT *MemPtr; |
| DIE_STRUCT *MCTPtr; |
| DCT_STRUCT *DCTPtr; |
| MEM_NB_BLOCK *NBPtr; |
| |
| NBPtr = TechPtr->NBPtr; |
| MemPtr = NBPtr->MemPtr; |
| MCTPtr = NBPtr->MCTPtr; |
| TechPtr->TrainingType = TRN_RCVR_ENABLE; |
| |
| |
| TempAddrRJ16 = 0; |
| TempPtr = NULL; |
| MaxDelayCha = 0; |
| TimesRetrain = DEFAULT_TRAINING_TIMES; |
| IDS_OPTION_HOOK (IDS_MEM_RETRAIN_TIMES, &TimesRetrain, &MemPtr->StdHeader); |
| |
| IDS_HDT_CONSOLE (MEM_STATUS, "\nStart Optimized SW RxEn training\n"); |
| // Set environment settings before training |
| MemTBeginTraining (TechPtr); |
| |
| PatternBufPtr[0] = PatternBufPtr[2] = PatternBuffer; |
| // These two patterns used for first Test Address |
| MemUFillTrainPattern (TestPattern0, PatternBufPtr[0], 64); |
| // Second Cacheline used for Dummy Read is the inverse of |
| // the first so that is is not mistaken for the real read |
| MemUFillTrainPattern (TestPattern1, PatternBufPtr[0] + 64, 64); |
| PatternBufPtr[1] = PatternBufPtr[3] = PatternBufPtr[0] + 128; |
| // These two patterns used for second Test Address |
| MemUFillTrainPattern (TestPattern1, PatternBufPtr[1], 64); |
| // Second Cacheline used for Dummy Read is the inverse of |
| // the first so that is is not mistaken for the real read |
| MemUFillTrainPattern (TestPattern0, PatternBufPtr[1] + 64, 64); |
| |
| // Fill pattern for flush after every sweep |
| PatternBufPtr[4] = PatternBufPtr[0] + 256; |
| MemUFillTrainPattern (TestPattern3, PatternBufPtr[4], 64); |
| |
| // Fill pattern for initial dummy read |
| PatternBufPtr[5] = PatternBufPtr[0] + 320; |
| MemUFillTrainPattern (TestPattern4, PatternBufPtr[5], 64); |
| |
| |
| // Begin receiver enable training |
| AGESA_TESTPOINT (TpProcMemReceiverEnableTraining, &(MemPtr->StdHeader)); |
| for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { |
| IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct); |
| NBPtr->SwitchDCT (NBPtr, Dct); |
| DCTPtr = NBPtr->DCTPtr; |
| |
| // Set training bit |
| NBPtr->SetBitField (NBPtr, BFDqsRcvEnTrain, 1); |
| |
| // Relax Max Latency before training |
| NBPtr->SetMaxLatency (NBPtr, 0xFFFF); |
| |
| if (Pass == FIRST_PASS) { |
| TechPtr->InitDQSPos4RcvrEn (TechPtr); |
| } |
| |
| // there are four receiver pairs, loosely associated with chipselects. |
| Receiver = DCTPtr->Timings.CsEnabled ? 0 : 8; |
| for (; Receiver < 8; Receiver += 2) { |
| S0En = NBPtr->GetSysAddr (NBPtr, Receiver, &TestAddrRJ16[0]); |
| S1En = NBPtr->GetSysAddr (NBPtr, Receiver + 1, &TestAddrRJ16[2]); |
| if (S0En) { |
| TestAddrRJ16[1] = TestAddrRJ16[0] + BIGPAGE_X8_RJ16; |
| } |
| if (S1En) { |
| TestAddrRJ16[3] = TestAddrRJ16[2] + BIGPAGE_X8_RJ16; |
| } |
| if (S0En && S1En) { |
| IsDualRank = TRUE; |
| } else { |
| IsDualRank = FALSE; |
| } |
| if (S0En || S1En) { |
| IDS_HDT_CONSOLE (MEM_STATUS, "\t\tCS %d\n", Receiver); |
| |
| RcvrEnDlyLimit = 0x1FF; // @attention - limit depends on proc type |
| TechPtr->DqsRcvEnSaved = 0; |
| RcvrEnDly = RcvrEnDlyLimit; |
| RealAddr = 0; |
| |
| TechPtr->GetFirstPassVal = FALSE; |
| TechPtr->DqsRcvEnFirstPassVal = 0; |
| TechPtr->RevertPassVal = FALSE; |
| TechPtr->InitializeVariablesOpt (TechPtr); |
| |
| // Write the test patterns |
| AGESA_TESTPOINT (TpProcMemRcvrWritePattern, &(MemPtr->StdHeader)); |
| IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tWrite to addresses: "); |
| for (i = (S0En ? 0 : 2); i < (S1En ? 4 : 2); i++) { |
| RealAddr = MemUSetUpperFSbase (TestAddrRJ16[i], MemPtr); |
| // One cacheline of data to be tested and one of dummy data |
| MemUWriteCachelines (RealAddr, PatternBufPtr[i], 2); |
| // This is dummy data with a different pattern used for the first dummy read. |
| MemUWriteCachelines (RealAddr + 128, PatternBufPtr[5], 1); |
| IDS_HDT_CONSOLE (MEM_FLOW, " %04x0000 ", TestAddrRJ16[i]); |
| } |
| IDS_HDT_CONSOLE (MEM_FLOW, "\n"); |
| |
| // Sweep receiver enable delays |
| AGESA_TESTPOINT (TpProcMemRcvrStartSweep, &(MemPtr->StdHeader)); |
| TimesFail = 0; |
| ERROR_HANDLE_RETRAIN_BEGIN (TimesFail, TimesRetrain) |
| { |
| TechPtr->LoadInitialRcvrEnDlyOpt (TechPtr, Receiver); |
| while (!TechPtr->CheckRcvrEnDlyLimitOpt (TechPtr)) { |
| AGESA_TESTPOINT (TpProcMemRcvrSetDelay, &(MemPtr->StdHeader)); |
| TechPtr->SetRcvrEnDlyOpt (TechPtr, Receiver, RcvrEnDly); |
| // Read and compare the first beat of data |
| for (i = (S0En ? 0 : 2); i < (S1En ? 4 : 2); i++) { |
| AGESA_TESTPOINT (TpProcMemRcvrReadPattern, &(MemPtr->StdHeader)); |
| RealAddr = MemUSetUpperFSbase (TestAddrRJ16[i], MemPtr); |
| // |
| // Issue dummy cacheline reads |
| // |
| MemUReadCachelines (TestBuffer + 128, RealAddr + 128, 1); |
| MemUReadCachelines (TestBuffer, RealAddr, 1); |
| MemUProcIOClFlush (TestAddrRJ16[i], 2, MemPtr); |
| // |
| // Perform actual read which will be compared |
| // |
| MemUReadCachelines (TestBuffer + 64, RealAddr + 64, 1); |
| AGESA_TESTPOINT (TpProcMemRcvrTestPattern, &(MemPtr->StdHeader)); |
| CurTest[i] = TechPtr->Compare1ClPatternOpt (TechPtr, TestBuffer + 64 , PatternBufPtr[i] + 64, i, Receiver, S1En); |
| // Due to speculative execution during MemUReadCachelines, we must |
| // flush one more cache line than we read. |
| MemUProcIOClFlush (TestAddrRJ16[i], 4, MemPtr); |
| TechPtr->ResetDCTWrPtr (TechPtr, Receiver); |
| |
| // |
| // Swap the test pointers such that even and odd steps alternate. |
| // |
| if ((i % 2) == 0) { |
| TempPtr = PatternBufPtr[i]; |
| PatternBufPtr[i] = PatternBufPtr[i + 1]; |
| |
| TempAddrRJ16 = TestAddrRJ16[i]; |
| TestAddrRJ16[i] = TestAddrRJ16[i + 1]; |
| } else { |
| PatternBufPtr[i] = TempPtr; |
| TestAddrRJ16[i] = TempAddrRJ16; |
| } |
| } |
| } // End of delay sweep |
| ERROR_HANDLE_RETRAIN_END (!TechPtr->SetSweepErrorOpt (TechPtr, Receiver, Dct, TRUE), TimesFail) |
| } |
| |
| if (!TechPtr->SetSweepErrorOpt (TechPtr, Receiver, Dct, FALSE)) { |
| return FALSE; |
| } |
| |
| TechPtr->LoadRcvrEnDlyOpt (TechPtr, Receiver); // set final delays |
| // |
| // Flush AA and 55 patterns by reading a dummy pattern to fill in FIFO |
| // |
| // Aquire a new FSBase, based on the last test address that we stored. |
| RealAddr = MemUSetUpperFSbase (TempAddrRJ16, MemPtr); |
| ASSERT (RealAddr != 0); |
| MemUWriteCachelines (RealAddr, PatternBufPtr[4], 1); |
| MemUWriteCachelines (RealAddr + 64, PatternBufPtr[4], 1); |
| MemUReadCachelines (TestBuffer, RealAddr, 2); |
| // Due to speculative execution during MemUReadCachelines, we must |
| // flush one more cache line than we read. |
| MemUProcIOClFlush (TempAddrRJ16, 3, MemPtr); |
| } |
| } // End while Receiver < 8 |
| |
| // Clear training bit when done |
| NBPtr->SetBitField (NBPtr, BFDqsRcvEnTrain, 0); |
| |
| // Set Max Latency for both channels |
| MaxRcvrEnDly = TechPtr->GetMaxValueOpt (TechPtr); |
| IDS_HDT_CONSOLE (MEM_FLOW, "\t\tMaxRcvrEnDly: %03x\n", MaxRcvrEnDly); |
| if (MCTPtr->GangedMode) { |
| if (Dct == 0) { |
| MaxDelayCha = MaxRcvrEnDly; |
| } else if (MaxRcvrEnDly > MaxDelayCha) { |
| NBPtr->SwitchDCT (NBPtr, 0); |
| NBPtr->SetMaxLatency (NBPtr, MaxRcvrEnDly); |
| } |
| } else { |
| NBPtr->SetMaxLatency (NBPtr, MaxRcvrEnDly); |
| } |
| TechPtr->ResetDCTWrPtr (TechPtr, 6); |
| } |
| |
| // Restore environment settings after training |
| MemTEndTraining (TechPtr); |
| IDS_HDT_CONSOLE (MEM_FLOW, "End Optimized SW RxEn training\n\n"); |
| return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL); |
| } |
| |
| /*----------------------------------------------------------------------------- |
| * |
| * This function saves passing DqsRcvEnDly values to the stack |
| * |
| * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK |
| * @param[in] Receiver - Current Chip select value |
| * @param[in] RcvEnDly - receiver enable delay to be saved |
| * @param[in] cmpResultRank0 - compare result for Rank 0 |
| * @param[in] cmpResultRank0 - compare result for Rank 1 |
| * |
| * @retval TRUE - All bytelanes pass |
| * FALSE - Some bytelanes fail |
| * ---------------------------------------------------------------------------- |
| */ |
| |
| BOOLEAN |
| MemTSaveRcvrEnDlyByteFilterOpt ( |
| IN OUT MEM_TECH_BLOCK *TechPtr, |
| IN UINT8 Receiver, |
| IN UINT16 RcvEnDly, |
| IN UINT16 CmpResultRank0, |
| IN UINT16 CmpResultRank1 |
| ) |
| { |
| UINT8 i; |
| UINT8 Passed; |
| UINT8 Dimm; |
| CH_DEF_STRUCT *ChannelPtr; |
| |
| ASSERT (Receiver < MAX_CS_PER_CHANNEL); |
| ChannelPtr = TechPtr->NBPtr->ChannelPtr; |
| |
| Passed = (UINT8) ((CmpResultRank0 & CmpResultRank1) & 0xFF); |
| |
| Dimm = Receiver >> 1; |
| |
| if (TechPtr->GetFirstPassVal && (RcvEnDly - TechPtr->DqsRcvEnFirstPassVal) >= 0x30) { |
| for (i = 0; i < 8; i++) { |
| ChannelPtr->RcvEnDlys[Dimm * TechPtr->DlyTableWidth () + i] = TechPtr->DqsRcvEnFirstPassVal + NEW_RECEIVER_FINAL_OFFSETVALUE; |
| } |
| TechPtr->DqsRcvEnSaved = 0xFF; |
| } |
| |
| if (Passed == 0xFF) { |
| if (!TechPtr->GetFirstPassVal) { |
| TechPtr->DqsRcvEnFirstPassVal = RcvEnDly; |
| TechPtr->GetFirstPassVal = TRUE; |
| } |
| return TRUE; |
| } else { |
| TechPtr->DqsRcvEnFirstPassVal = 0; |
| |
| // We have got first passing value, but later, we meet with glitch |
| if (TechPtr->GetFirstPassVal) { |
| TechPtr->DqsRcvEnFirstPassVal = 0xFF; |
| TechPtr->GetFirstPassVal = FALSE; |
| } |
| return FALSE; |
| } |
| } |
