blob: c82681f53ea668dd61645bb3f8d759ff0cc3f7ee [file] [log] [blame]
/* $NoKeywords:$ */
/**
* @file
*
* Config Fch Pcib controller
*
* Init Pcib Controller features (PEI phase).
*
* @xrefitem bom "File Content Label" "Release Content"
* @e project: AGESA
* @e sub-project: FCH
* @e \$Revision: 48244 $ @e \$Date: 2011-03-05 12:39:46 +0800 (Sat, 05 Mar 2011) $
*
*/
/*
*****************************************************************************
*
* Copyright (c) 2011, Advanced Micro Devices, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Advanced Micro Devices, Inc. nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
****************************************************************************
*/
#include "FchPlatform.h"
#define FILECODE PROC_FCH_PCIB_PCIBRESET_FILECODE
/**
* FchInitResetPcibPciTable - Pcib device registers initial
* during the power on stage.
*
*
*
*
*/
REG8_MASK FchInitResetPcibPciTable[] =
{
//
// P2P Bridge (Bus 0, Dev 20, Func 4)
//
{0x00, PCIB_BUS_DEV_FUN, 0},
{FCH_PCIB_REG4B, 0xFF, BIT6 + BIT7 + BIT4},
// ENH230012: Disable P2P bridge decoder for IO address 0x1000-0x1FFF in Reset
// ENH261115: Add PCI port 80 support in Hudson-2/3. Platform bios define SB_PCIB_PORT_80_SUPPORT to support it
#ifdef SB_PCIB_PORT_80_SUPPORT
{FCH_PCIB_REG1C, 0x00, 0xF0},
{FCH_PCIB_REG1D, 0x00, 0x00},
{FCH_PCIB_REG04, 0x00, 0x21},
#endif
{FCH_PCIB_REG40, 0xDF, 0x20},
{FCH_PCIB_REG50, 0x02, 0x01},
{0xFF, 0xFF, 0xFF},
};
/**
* FchInitResetPcib - Config Pcib controller during Power-On
*
*
*
* @param[in] FchDataPtr Fch configuration structure pointer.
*
*/
VOID
FchInitResetPcib (
IN VOID *FchDataPtr
)
{
AMD_CONFIG_PARAMS *StdHeader;
StdHeader = &((AMD_RESET_PARAMS *)FchDataPtr)->StdHeader;
ProgramPciByteTable (
(REG8_MASK*) (&FchInitResetPcibPciTable[0]),
sizeof (FchInitResetPcibPciTable) / sizeof (REG8_MASK),
StdHeader
);
}
/**
* FchInitRecoveryPcib - Config Pcib controller during Crisis
* Recovery
*
*
*
* @param[in] FchDataPtr Fch configuration structure pointer.
*
*/
VOID
FchInitRecoveryPcib (
IN VOID *FchDataPtr
)
{
}