blob: b8bfeb623280a02967395918cd3ccc49569dab79 [file] [log] [blame]
/* $NoKeywords:$ */
/**
* @file
*
* Config Fch Pcib controller
*
* Init Pcib Controller features.
*
* @xrefitem bom "File Content Label" "Release Content"
* @e project: AGESA
* @e sub-project: FCH
* @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $
*
*/
/*
*****************************************************************************
*
* Copyright (c) 2011, Advanced Micro Devices, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Advanced Micro Devices, Inc. nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
****************************************************************************
*/
#include "FchPlatform.h"
#define FILECODE PROC_FCH_PCIB_PCIBENV_FILECODE
/**
* FchInitEnvPcibPciTable - PCI device registers initial during
* early POST.
*
*/
REG8_MASK FchInitEnvPcibPciTable[] =
{
//
// PCIB Bridge (Bus 0, Dev 20, Func 4)
//
{0x00, PCIB_BUS_DEV_FUN, 0},
{FCH_PCIB_REG40, 0xFF, BIT5}, /// PCI-bridge Subtractive Decode
{FCH_PCIB_REG4B, 0xFF, BIT7}, ///
{FCH_PCIB_REG66, 0xFF, BIT4}, /// Enabling One-Prefetch-Channel Mode, PCIB_PCI_config 0x64 [20]
{FCH_PCIB_REG65, 0xFF, BIT7}, /// proper operation of CLKRUN#.
{FCH_PCIB_REG0D, 0x00, 0x40}, /// Setting Latency Timers to 0x40, Enables the PCIB to retain ownership
{FCH_PCIB_REG1B, 0x00, 0x40}, /// of the bus on the Primary side and on the Secondary side when GNT# is deasserted.
{FCH_PCIB_REG66 + 1, 0xFF, BIT1}, /// Enable PCI bus GNT3#..
{0xFF, 0xFF, 0xFF},
};
/**
* FchInitEnvPcib - Config Pcib controller before PCI emulation
*
*
*
* @param[in] FchDataPtr Fch configuration structure pointer.
*
*/
VOID
FchInitEnvPcib (
IN VOID *FchDataPtr
)
{
UINT8 VerbPciClks;
FCH_DATA_BLOCK *LocalCfgPtr;
AMD_CONFIG_PARAMS *StdHeader;
LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr;
StdHeader = LocalCfgPtr->StdHeader;
//
//Early post initialization of pci config space
//
ProgramPciByteTable ((REG8_MASK*) (&FchInitEnvPcibPciTable[0]), sizeof (FchInitEnvPcibPciTable) / sizeof (REG8_MASK), StdHeader);
//
//Disable or Enable PCI Clks based on input
//
VerbPciClks = ((LocalCfgPtr->Pcib.PciClks & 0x0F) << 2);
RwPci ((PCIB_BUS_DEV_FUN << 16) + FCH_PCIB_REG42, AccessWidth8, ~(BIT5 + BIT4 + BIT3 + BIT2), VerbPciClks, StdHeader);
//
// PCIB MSI
//
if (LocalCfgPtr->Pcib.PcibMsiEnable) {
RwPci ((PCIB_BUS_DEV_FUN << 16) + FCH_PCIB_REG40, AccessWidth8, ~BIT3, BIT3, StdHeader);
}
}