| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2007-2009 coresystems GmbH |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; version 2 of |
| * the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, |
| * MA 02110-1301 USA |
| */ |
| |
| /* Intel 82801Gx support */ |
| |
| Scope(\) |
| { |
| // IO-Trap at 0x800. This is the ACPI->SMI communication interface. |
| |
| OperationRegion(IO_T, SystemIO, 0x800, 0x10) |
| Field(IO_T, ByteAcc, NoLock, Preserve) |
| { |
| Offset(0x8), |
| TRP0, 8 // IO-Trap at 0x808 |
| } |
| |
| // ICH7 Power Management Registers, located at PMBASE (0x1f.0 0x40.l) |
| OperationRegion(PMIO, SystemIO, DEFAULT_PMBASE, 0x80) |
| Field(PMIO, ByteAcc, NoLock, Preserve) |
| { |
| Offset(0x42), // General Purpose Control |
| , 1, // skip 1 bit |
| GPEC, 1, // TCO status |
| , 9, // skip 9 more bits |
| SCIS, 1, // TCO DMI status |
| , 6 // To the end of the word |
| } |
| |
| // ICH7 GPIO IO mapped registers (0x1f.0 reg 0x48.l) |
| OperationRegion(GPIO, SystemIO, DEFAULT_GPIOBASE, 0x3c) |
| Field(GPIO, ByteAcc, NoLock, Preserve) |
| { |
| Offset(0x00), // GPIO Use Select |
| GU00, 8, |
| GU01, 8, |
| GU02, 8, |
| GU03, 8, |
| Offset(0x04), // GPIO IO Select |
| GIO0, 8, |
| GIO1, 8, |
| GIO2, 8, |
| GIO3, 8, |
| Offset(0x0c), // GPIO Level |
| GP00, 1, |
| GP01, 1, |
| GP02, 1, |
| GP03, 1, |
| GP04, 1, |
| GP05, 1, |
| GP06, 1, // GDET |
| GP07, 1, |
| GP08, 1, |
| GP09, 1, // HPMU |
| GP10, 1, // GPSE |
| GP11, 1, |
| GP12, 1, // WLED |
| GP13, 1, // BLED |
| GP14, 1, // GLED |
| GP15, 1, // GDIS |
| GP16, 1, |
| GP17, 1, |
| GP18, 1, // SPCI |
| GP19, 1, // TSDT |
| GP20, 1, // SCPU |
| GP21, 1, |
| GP22, 1, |
| GP23, 1, // LANP |
| GP24, 1, // DKLR |
| GP25, 1, // WLAN |
| GP26, 1, // SATA_PWR_EN #0 / SPOF |
| GP27, 1, // SATA_PWR_EN #1 / SPMU |
| GP28, 1, |
| GP29, 1, |
| GP30, 1, |
| GP31, 1, |
| Offset(0x18), // GPIO Blink |
| GB00, 8, |
| GB01, 8, |
| GB02, 8, |
| GB03, 8, |
| Offset(0x2c), // GPIO Invert |
| GIV0, 8, |
| GIV1, 8, |
| GIV2, 8, |
| GIV3, 8, |
| Offset(0x30), // GPIO Use Select 2 |
| GU04, 8, |
| GU05, 8, |
| GU06, 8, |
| GU07, 8, |
| Offset(0x34), // GPIO IO Select 2 |
| GIO4, 8, |
| GIO5, 8, |
| GIO6, 8, |
| GIO7, 8, |
| Offset(0x38), // GPIO Level 2 |
| GP32, 1, |
| GP33, 1, // CREN |
| GP34, 1, // CRRS |
| GP35, 1, |
| GP36, 1, // STAD |
| GP37, 1, // PATA_PWR_EN / HDDE |
| GP38, 1, // Battery / Power (?) / MB00 |
| GP39, 1, // ?? / MB01 |
| GL05, 8, |
| GL06, 8, |
| GL07, 8 |
| } |
| |
| |
| // ICH7 Root Complex Register Block. Memory Mapped through RCBA) |
| OperationRegion(RCRB, SystemMemory, DEFAULT_RCBA, 0x4000) |
| Field(RCRB, DWordAcc, Lock, Preserve) |
| { |
| Offset(0x0000), // Backbone |
| Offset(0x1000), // Chipset |
| Offset(0x3000), // Legacy Configuration Registers |
| Offset(0x3404), // High Performance Timer Configuration |
| HPAS, 2, // Address Select |
| , 5, |
| HPTE, 1, // Address Enable |
| Offset(0x3418), // FD (Function Disable) |
| , 1, // Reserved |
| PATD, 1, // PATA disable |
| SATD, 1, // SATA disable |
| SMBD, 1, // SMBUS disable |
| HDAD, 1, // Azalia disable |
| A97D, 1, // AC'97 disable |
| M97D, 1, // AC'97 disable |
| ILND, 1, // Internal LAN disable |
| US1D, 1, // UHCI #1 disable |
| US2D, 1, // UHCI #2 disable |
| US3D, 1, // UHCI #3 disable |
| US4D, 1, // UHCI #4 disable |
| , 2, // Reserved |
| LPBD, 1, // LPC bridge disable |
| EHCD, 1, // EHCI disable |
| Offset(0x341a), // FD Root Ports |
| RP1D, 1, // Root Port 1 disable |
| RP2D, 1, // Root Port 2 disable |
| RP3D, 1, // Root Port 3 disable |
| RP4D, 1, // Root Port 4 disable |
| RP5D, 1, // Root Port 5 disable |
| RP6D, 1 // Root Port 6 disable |
| } |
| |
| } |
| |
| // 0:1b.0 High Definition Audio (Azalia) |
| #include "audio.asl" |
| |
| // PCI Express Ports |
| #include "pcie.asl" |
| |
| // USB |
| #include "usb.asl" |
| |
| // PCI Bridge |
| #include "pci.asl" |
| |
| // AC97 Audio and Modem |
| #include "ac97.asl" |
| |
| // LPC Bridge |
| #include "lpc.asl" |
| |
| // PATA |
| #include "pata.asl" |
| |
| // SATA |
| #include "sata.asl" |
| |
| // SMBus |
| #include "smbus.asl" |
| |
| |
