| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2010 Advanced Micro Devices, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <console/console.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <device/pnp.h> |
| #include <device/pci_ids.h> |
| #include <device/pci_ops.h> |
| #include <device/pci_def.h> |
| #include <pc80/mc146818rtc.h> |
| #include <pc80/isa-dma.h> |
| #include <arch/io.h> |
| #include "hudson.h" |
| |
| static void lpc_init(device_t dev) |
| { |
| u8 byte; |
| u32 dword; |
| device_t sm_dev; |
| |
| /* Enable the LPC Controller */ |
| sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); |
| dword = pci_read_config32(sm_dev, 0x64); |
| dword |= 1 << 20; |
| pci_write_config32(sm_dev, 0x64, dword); |
| |
| /* Initialize isa dma */ |
| isa_dma_init(); |
| |
| /* Enable DMA transaction on the LPC bus */ |
| byte = pci_read_config8(dev, 0x40); |
| byte |= (1 << 2); |
| pci_write_config8(dev, 0x40, byte); |
| |
| /* Disable the timeout mechanism on LPC */ |
| byte = pci_read_config8(dev, 0x48); |
| byte &= ~(1 << 7); |
| pci_write_config8(dev, 0x48, byte); |
| |
| /* Disable LPC MSI Capability */ |
| byte = pci_read_config8(dev, 0x78); |
| byte &= ~(1 << 1); |
| byte &= ~(1 << 0); /* Keep the old way. i.e., when bus master/DMA cycle is going |
| on on LPC, it holds PCI grant, so no LPC slave cycle can |
| interrupt and visit LPC. */ |
| pci_write_config8(dev, 0x78, byte); |
| |
| /* bit0: Enable prefetch a cacheline (64 bytes) when Host reads code from SPI rom */ |
| /* bit3: Fix SPI_CS# timing issue when running at 66M. TODO:A12. */ |
| byte = pci_read_config8(dev, 0xBB); |
| byte |= 1 << 0 | 1 << 3; |
| pci_write_config8(dev, 0xBB, byte); |
| |
| rtc_check_update_cmos_date(RTC_HAS_ALTCENTURY); |
| |
| /* Initialize the real time clock. |
| * The 0 argument tells rtc_init not to |
| * update CMOS unless it is invalid. |
| * 1 tells rtc_init to always initialize the CMOS. |
| */ |
| rtc_init(0); |
| } |
| |
| static void hudson_lpc_read_resources(device_t dev) |
| { |
| struct resource *res; |
| |
| /* Get the normal pci resources of this device */ |
| pci_dev_read_resources(dev); /* We got one for APIC, or one more for TRAP */ |
| |
| pci_get_resource(dev, 0xA0); /* SPI ROM base address */ |
| |
| /* Add an extra subtractive resource for both memory and I/O. */ |
| res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0)); |
| res->base = 0; |
| res->size = 0x1000; |
| res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | |
| IORESOURCE_ASSIGNED | IORESOURCE_FIXED; |
| |
| res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0)); |
| res->base = 0xff800000; |
| res->size = 0x00800000; /* 8 MB for flash */ |
| res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | |
| IORESOURCE_ASSIGNED | IORESOURCE_FIXED; |
| |
| //res = new_resource(dev, 3); /* IOAPIC */ |
| //res->base = 0xfec00000; |
| //res->size = 0x00001000; |
| //res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; |
| |
| compact_resources(dev); |
| } |
| |
| static void hudson_lpc_set_resources(struct device *dev) |
| { |
| struct resource *res; |
| |
| /* Special case. SPI Base Address. The SpiRomEnable should STAY set. */ |
| res = find_resource(dev, SPIROM_BASE_ADDRESS_REGISTER); |
| res->base |= PCI_COMMAND_MEMORY; |
| |
| pci_dev_set_resources(dev); |
| |
| |
| } |
| |
| /** |
| * @brief Enable resources for children devices |
| * |
| * @param dev the device whos children's resources are to be enabled |
| * |
| */ |
| static void hudson_lpc_enable_childrens_resources(device_t dev) |
| { |
| printk(BIOS_DEBUG, "hudson_lpc_enable_childrens_resources\n"); |
| |
| } |
| |
| static void hudson_lpc_enable_resources(device_t dev) |
| { |
| pci_dev_enable_resources(dev); |
| hudson_lpc_enable_childrens_resources(dev); |
| } |
| |
| static struct pci_operations lops_pci = { |
| .set_subsystem = pci_dev_set_subsystem, |
| }; |
| |
| static struct device_operations lpc_ops = { |
| .read_resources = hudson_lpc_read_resources, |
| .set_resources = hudson_lpc_set_resources, |
| .enable_resources = hudson_lpc_enable_resources, |
| .init = lpc_init, |
| .scan_bus = scan_static_bus, |
| .ops_pci = &lops_pci, |
| }; |
| static const struct pci_driver lpc_driver __pci_driver = { |
| .ops = &lpc_ops, |
| .vendor = PCI_VENDOR_ID_AMD, |
| .device = PCI_DEVICE_ID_ATI_SB900_LPC, |
| }; |