| /* This file was generated by getpir.c, do not modify! |
| * (but if you do, please run checkpir on it to verify) |
| * |
| * Contains the IRQ Routing Table dumped directly from your |
| * memory, which BIOS sets up. |
| * |
| * Documentation at: http://www.microsoft.com/whdc/archive/pciirq.mspx |
| */ |
| |
| #ifdef GETPIR |
| #include "pirq_routing.h" |
| #else |
| #include <arch/pirq_routing.h> |
| #endif |
| |
| static const struct irq_routing_table intel_irq_routing_table = { |
| PIRQ_SIGNATURE, /* u32 signature */ |
| PIRQ_VERSION, /* u16 version */ |
| 32+16*CONFIG_IRQ_SLOT_COUNT, /* There can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ |
| 0x00, /* Where the interrupt router lies (bus) */ |
| (0x11<<3)|0x0, /* Where the interrupt router lies (dev) */ |
| 0x1c00, /* IRQs devoted exclusively to PCI usage */ |
| 0x1106, /* Vendor */ |
| 0x3227, /* Device */ |
| 0, /* Miniport */ |
| { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ |
| 0xf, /* u8 checksum. This has to be set to some |
| value that would give 0 after the sum of all |
| bytes for this structure (including checksum) */ |
| { |
| /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ |
| {0x00,(0x14<<3)|0x0, {{0x03, 0xdeb8}, {0x05, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0xdeb8}}, 0x1, 0x0}, |
| {0x00,(0x13<<3)|0x0, {{0x05, 0xdeb8}, {0x03, 0xdeb8}, {0x02, 0xdeb8}, {0x01, 0xdeb8}}, 0x2, 0x0}, |
| {0x00,(0x11<<3)|0x0, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0}, |
| {0x00,(0x0f<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0}, |
| {0x00,(0x01<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0}, |
| {0x00,(0x10<<3)|0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0}, |
| {0x00,(0x12<<3)|0x0, {{0x01, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}}, 0x0, 0x0}, |
| } |
| }; |
| #ifndef GETPIR |
| |
| unsigned long write_pirq_routing_table(unsigned long addr) |
| { |
| return copy_pirq_routing_table(addr, &intel_irq_routing_table); |
| } |
| #endif |
