blob: ee01e8a43e318c3257feed29800fba4e261e0edb [file] [log] [blame]
chip northbridge/intel/sandybridge
# Enable DisplayPort 1 Hotplug with 6ms pulse
register "gpu_dp_d_hotplug" = "0x06"
# Enable DisplayPort 0 Hotplug with 6ms pulse
register "gpu_dp_c_hotplug" = "0x06"
# Enable DVI Hotplug with 6ms pulse
register "gpu_dp_b_hotplug" = "0x06"
device cpu_cluster 0 on
chip cpu/intel/socket_rPGA989
device lapic 0 on end
end
chip cpu/intel/model_206ax
# Magic APIC ID to locate this chip
device lapic 0xACAC off end
register "c1_battery" = "3" # ACPI(C1) = MWAIT(C3)
register "c2_battery" = "4" # ACPI(C2) = MWAIT(C6)
register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7)
register "c1_acpower" = "3" # ACPI(C1) = MWAIT(C3)
register "c2_acpower" = "4" # ACPI(C2) = MWAIT(C6)
register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7)
end
end
device domain 0 on
subsystemid 0x1ae0 0xc000 inherit
device pci 00.0 on end # host bridge
device pci 02.0 on end # vga controller
chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
register "pirqa_routing" = "0x8b"
register "pirqb_routing" = "0x8a"
register "pirqc_routing" = "0x8b"
register "pirqd_routing" = "0x8b"
register "pirqe_routing" = "0x80"
register "pirqf_routing" = "0x80"
register "pirqg_routing" = "0x80"
register "pirqh_routing" = "0x80"
# GPI routing
# 0 No effect (default)
# 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
# 2 SCI (if corresponding GPIO_EN bit is also set)
register "gpi1_routing" = "0"
register "gpi14_routing" = "2"
register "ide_legacy_combined" = "0x0"
register "sata_ahci" = "0x1"
register "sata_port_map" = "0x3"
# SuperIO range is 0x700-0x73f
register "gen2_dec" = "0x003c0701"
device pci 16.0 on end # Management Engine Interface 1
device pci 16.1 off end # Management Engine Interface 2
device pci 16.2 off end # Management Engine IDE-R
device pci 16.3 off end # Management Engine KT
device pci 19.0 off end # Intel Gigabit Ethernet
device pci 1a.0 on end # USB2 EHCI #2
device pci 1b.0 on end # High Definition Audio
device pci 1c.0 on end # PCIe Port #1 (WLAN)
device pci 1c.1 off end # PCIe Port #2
device pci 1c.2 on end # PCIe Port #3 (Debug)
device pci 1c.3 on end # PCIe Port #4 (LAN)
device pci 1c.4 off end # PCIe Port #5
device pci 1c.5 off end # PCIe Port #6
device pci 1c.6 off end # PCIe Port #7
device pci 1c.7 off end # PCIe Port #8
device pci 1d.0 on end # USB2 EHCI #1
device pci 1e.0 off end # PCI bridge
device pci 1f.0 on # LPC bridge
chip superio/ite/it8772f
# Enable GPIO10 as USBPWRON12#
# Enable GPIO12 as USBPWRON13#
register "gpio_set1" = "0x05"
# Enable GPIO22 as SIO_WAEKSCI#
register "gpio_set2" = "0x04"
# Enable GPIO32 as SIO_EXTSMI#
register "gpio_set3" = "0x04"
# Enable GPIO45 as LED_POWER#
register "gpio_set4" = "0x20"
# Enable GPIO51 as USBPWRON8#
# Enable GPIO52 as USBPWRON1#
register "gpio_set5" = "0x06"
# Skip keyboard init
register "skip_keyboard" = "1"
# Enable PECI on TMPIN3
register "peci_tmpin" = "3"
# Enable FAN3
register "fan3_enable" = "1"
device pnp 2e.0 off end # FDC
device pnp 2e.1 on # Serial Port 1
io 0x60 = 0x2f8
irq 0x70 = 4
end
device pnp 2e.4 on # Environment Controller
io 0x60 = 0x700
io 0x62 = 0x710
end
device pnp 2e.7 on # GPIO
io 0x60 = 0x720
io 0x62 = 0x730
end
device pnp 2e.5 on
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1
end # Keyboard
device pnp 2e.6 on
irq 0x70 = 12
end # Mouse
device pnp 2e.a off end # IR
end
end
device pci 1f.2 on end # SATA Controller 1
device pci 1f.3 on end # SMBus
device pci 1f.5 off end # SATA Controller 2
device pci 1f.6 on end # Thermal
end
end
end