| /* This file was generated by getpir.c, do not modify! |
| (but if you do, please run checkpir on it to verify) |
| Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up |
| |
| Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM |
| */ |
| |
| #include <arch/pirq_routing.h> |
| |
| static const struct irq_routing_table intel_irq_routing_table = { |
| PIRQ_SIGNATURE, /* u32 signature */ |
| PIRQ_VERSION, /* u16 version */ |
| 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ |
| 0, /* Where the interrupt router lies (bus) */ |
| 0x88, /* Where the interrupt router lies (dev) */ |
| 0x1c20, /* IRQs devoted exclusively to PCI usage */ |
| 0x1106, /* Vendor */ |
| 0x8231, /* Device */ |
| 0, /* Miniport data */ |
| { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ |
| 0x5e, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ |
| { |
| /* 8231 ethernet */ |
| {0,0x90, {{0x1, 0xdeb8}, {0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}}, 0x1, 0}, |
| /* 8231 internal */ |
| {0,0x88, {{0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}}, 0x2, 0}, |
| /* PCI slot */ |
| {0,0xa0, {{0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}, {0x2, 0xdeb8}}, 0, 0}, |
| {0,0x50, {{0x4, 0xdeb8}, {0x3, 0xdeb8}, {0x2, 0xdeb8}, {0x1, 0xdeb8}}, 0x3, 0}, |
| {0,0x98, {{0x4, 0xdeb8}, {0x3, 0xdeb8}, {0x2, 0xdeb8}, {0x1, 0xdeb8}}, 0x4, 0}, |
| } |
| }; |
| unsigned long write_pirq_routing_table(unsigned long addr) |
| { |
| return copy_pirq_routing_table(addr, &intel_irq_routing_table); |
| } |
