blob: f246dcfb31a799ad56693312af18907b43832c9d [file] [log] [blame]
#Define gppsb_configuration, A=0, B=1, C=2, D=3, E=4(default)
#Define gpp_configuration -> device 9 1x and device a 1x is 3 and device 9 2x is 2
#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
# 1: the system allows a PCIE link to be established on Dev2 or Dev3.
#Define gfx_dual_slot, 0: single slot, 1: dual slot (means if GFX slot are two 2 8x slots)
#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
#Define gfx_tmds, 0: didn't support TMDS, 1: support
#Define gfx_compliance, 0: didn't support compliance, 1: support
#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration
#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16
chip northbridge/amd/amdk8/root_complex
device cpu_cluster 0 on
chip cpu/amd/socket_939
device lapic 0 on end
end
end
device domain 0 on
subsystemid 0x1022 0x3060 inherit
chip northbridge/amd/amdk8
device pci 18.0 on # southbridge
chip southbridge/amd/rs780
device pci 0.0 on end # HT 0x9600
device pci 1.0 on end # Internal Graphics P2P bridge 0x9602
device pci 2.0 on end # PCIE P2P bridge 16x slot
device pci 3.0 off end # used in dual slot config
device pci 4.0 off end # GPPSB
device pci 5.0 off end # GPPSB
device pci 6.0 off end # GPPSB
device pci 7.0 off end # GPPSB
device pci 8.0 off end # NB/SB Link P2P bridge
device pci 9.0 on end # GPP for x1 slot
device pci a.0 on end # GPP for internal network adapter
register "gppsb_configuration" = "4" # Configuration ?
register "gpp_configuration" = "3" # Configuration D default
register "port_enable" = "0x60c"
register "gfx_dev2_dev3" = "1"
register "gfx_dual_slot" = "0"
register "gfx_lane_reversal" = "0"
register "gfx_tmds" = "0"
register "gfx_compliance" = "0"
register "gfx_reconfiguration" = "1"
register "gfx_link_width" = "0"
end
chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus
device pci 11.0 on end # SATA
device pci 12.0 on end # USB
device pci 12.1 on end # USB
device pci 12.2 on end # USB
device pci 13.0 on end # USB
device pci 13.1 on end # USB
device pci 13.2 on end # USB
device pci 14.0 on # SM
chip drivers/generic/generic #dimm 0-0-0
device i2c 50 on end
end
chip drivers/generic/generic #dimm 0-0-1
device i2c 51 on end
end
chip drivers/generic/generic #dimm 0-1-0
device i2c 52 on end
end
chip drivers/generic/generic #dimm 0-1-1
device i2c 53 on end
end
end # SM
device pci 14.1 on end # IDE 0x439c
device pci 14.2 on end # HDA 0x4383
device pci 14.3 on # LPC 0x439d
chip superio/winbond/w83627dhg
device pnp 2e.0 off # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
drq 0x74 = 2
end
device pnp 2e.1 off # Parallel Port
io 0x60 = 0x378
irq 0x70 = 7
end
device pnp 2e.2 on # Com1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 2e.3 on # Com2
io 0x60 = 0x2f8
irq 0x70 = 3
end
device pnp 2e.5 on # PS/2 keyboard & mouse
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1
end
#device pnp 2e.6 off # SPI
#end
device pnp 2e.307 off # GPIO6
end
device pnp 2e.8 on # WDTO#, PLED
end
device pnp 2e.009 on # GPIO2
end
device pnp 2e.109 on # GPIO3
end
device pnp 2e.209 on # GPIO4
end
device pnp 2e.309 off # GPIO5
end
device pnp 2e.a off # ACPI
end
device pnp 2e.b on # HWM
io 0x60 = 0x290
end
device pnp 2e.c off # PECI, SST
end
end #superio/winbond/w8362
end #LPC
device pci 14.4 on end # PCI 0x4384
device pci 14.5 on end # USB 2
register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE
end #southbridge/amd/sb700
end # device pci 18.0
device pci 18.0 on end
device pci 18.0 on end
device pci 18.1 on end
device pci 18.2 on end
device pci 18.3 on end
end #northbridge/amd/amdk8
end #domain
end #northbridge/amd/amdk8/root_complex