| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2012 Advanced Micro Devices, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| /** |
| * @file |
| * |
| * AMD User options selection for a Brazos platform solution system |
| * |
| * This file is placed in the user's platform directory and contains the |
| * build option selections desired for that platform. |
| * |
| * For Information about this file, see @ref platforminstall. |
| * |
| * @xrefitem bom "File Content Label" "Release Content" |
| * @e project: AGESA |
| * @e sub-project: Core |
| * @e \$Revision: 23714 $ @e \$Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $ |
| */ |
| |
| #include "AGESA.h" |
| //#include "CommonReturns.h" |
| #include "Filecode.h" |
| #define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE |
| |
| /* Select the cpu family. */ |
| #define INSTALL_FAMILY_10_SUPPORT FALSE |
| #define INSTALL_FAMILY_12_SUPPORT FALSE |
| #define INSTALL_FAMILY_14_SUPPORT FALSE |
| #define INSTALL_FAMILY_15_MODEL_1x_SUPPORT TRUE |
| |
| /* Select the cpu socket type. */ |
| #define INSTALL_G34_SOCKET_SUPPORT FALSE |
| #define INSTALL_C32_SOCKET_SUPPORT FALSE |
| #define INSTALL_S1G3_SOCKET_SUPPORT FALSE |
| #define INSTALL_S1G4_SOCKET_SUPPORT FALSE |
| #define INSTALL_ASB2_SOCKET_SUPPORT FALSE |
| #define INSTALL_FS1_SOCKET_SUPPORT TRUE |
| #define INSTALL_FM1_SOCKET_SUPPORT FALSE |
| #define INSTALL_FP2_SOCKET_SUPPORT TRUE |
| #define INSTALL_FT1_SOCKET_SUPPORT FALSE |
| #define INSTALL_AM3_SOCKET_SUPPORT FALSE |
| |
| #define INSTALL_FM2_SOCKET_SUPPORT FALSE |
| |
| //#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE |
| //#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE |
| #define BLDOPT_REMOVE_LRDIMMS_SUPPORT TRUE |
| //#define BLDOPT_REMOVE_ECC_SUPPORT TRUE |
| //#define BLDOPT_REMOVE_BANK_INTERLEAVE TRUE |
| //#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE |
| #define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE |
| #define BLDOPT_REMOVE_PARALLEL_TRAINING TRUE |
| #define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE |
| //#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT TRUE |
| #define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE |
| //#define BLDOPT_REMOVE_ACPI_PSTATES FALSE |
| #define BLDOPT_REMOVE_SRAT FALSE //TRUE |
| #define BLDOPT_REMOVE_SLIT FALSE //TRUE |
| #define BLDOPT_REMOVE_WHEA FALSE //TRUE |
| #define BLDOPT_REMOVE_CRAT TRUE |
| //#define BLDOPT_REMOVE_DMI FALSE //TRUE |
| //#define BLDOPT_REMOVE_EARLY_SAMPLES FALSE |
| //#define BLDCFG_REMOVE_ACPI_PSTATES_PPC TRUE |
| //#define BLDCFG_REMOVE_ACPI_PSTATES_PCT TRUE |
| //#define BLDCFG_REMOVE_ACPI_PSTATES_PSD TRUE |
| //#define BLDCFG_REMOVE_ACPI_PSTATES_PSS TRUE |
| //#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS TRUE |
| |
| //This element selects whether P-States should be forced to be independent, |
| // as reported by the ACPI _PSD object. For single-link processors, |
| // setting TRUE for OS to support this feature. |
| |
| //#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT TRUE |
| |
| #define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS |
| #define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER |
| /* Build configuration values here. |
| */ |
| #define BLDCFG_VRM_CURRENT_LIMIT 90000 |
| #define BLDCFG_VRM_LOW_POWER_THRESHOLD 0 |
| #define BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT 0 |
| #define BLDCFG_PLAT_NUM_IO_APICS 3 |
| #define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST |
| #define BLDCFG_MEM_INIT_PSTATE 0 |
| |
| #define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE |
| |
| #define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1866_FREQUENCY |
| #define BLDCFG_MEMORY_MODE_UNGANGED TRUE |
| #define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE |
| #define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED |
| #define BLDCFG_MEMORY_RDIMM_CAPABLE FALSE |
| #define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE |
| #define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE |
| #define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE |
| #define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE |
| #define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE |
| #define BLDCFG_MEMORY_POWER_DOWN TRUE |
| #define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT |
| #define BLDCFG_ONLINE_SPARE FALSE |
| #define BLDCFG_BANK_SWIZZLE TRUE |
| #define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO |
| #define BLDCFG_MEMORY_CLOCK_SELECT DDR1866_FREQUENCY |
| #define BLDCFG_DQS_TRAINING_CONTROL TRUE |
| #define BLDCFG_IGNORE_SPD_CHECKSUM FALSE |
| #define BLDCFG_USE_BURST_MODE FALSE |
| #define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE |
| #define BLDCFG_ENABLE_ECC_FEATURE TRUE |
| #define BLDCFG_ECC_REDIRECTION FALSE |
| #define BLDCFG_SCRUB_DRAM_RATE 0 |
| #define BLDCFG_SCRUB_L2_RATE 0 |
| #define BLDCFG_SCRUB_L3_RATE 0 |
| #define BLDCFG_SCRUB_IC_RATE 0 |
| #define BLDCFG_SCRUB_DC_RATE 0 |
| #define BLDCFG_ECC_SYMBOL_SIZE 4 |
| #define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000 |
| #define BLDCFG_ECC_SYNC_FLOOD FALSE |
| #define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE |
| #define BLDCFG_1GB_ALIGN FALSE |
| #define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE |
| #define BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM 36 // PCIE Spread Spectrum default value 0.36% |
| #define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x1770 |
| |
| #define BLDOPT_REMOVE_ALIB FALSE |
| #define BLDCFG_PLATFORM_CPB_MODE CpbModeDisabled |
| #define BLDCFG_PROCESSOR_SCOPE_NAME0 'P' |
| #define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' |
| #define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6 |
| |
| #define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 200 |
| #define BLDCFG_CFG_ABM_SUPPORT 0 |
| |
| //#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x1770 |
| |
| // Specify the default values for the VRM controlling the VDDNB plane. |
| // If not specified, the values used for the core VRM will be applied |
| //#define BLDCFG_VRM_NB_CURRENT_LIMIT 0 // Not currently used on Trinity |
| //#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1 // Zero - disable NBPSI_L, Non-zero - enable NBPSI_L |
| //#define BLDCFG_VRM_NB_SLEW_RATE 5000 // Used in calculating the VSRampSlamTime |
| //#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 // Not currently used on Trinity |
| //#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE 0 // Not currently used on Trinity |
| //#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 // Not currently used on Trinity |
| |
| #define BLDCFG_VRM_NB_CURRENT_LIMIT 60000 |
| |
| #define BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON 3 |
| #define BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL 3 |
| |
| #if CONFIG_GFXUMA |
| #define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED |
| #define BLDCFG_UMA_ALLOCATION_MODE UMA_SPECIFIED |
| //#define BLDCFG_UMA_ALLOCATION_SIZE 0x1000//0x1800//0x1000 /* (1000 << 16) = 256M*/ |
| #define BLDCFG_UMA_ALLOCATION_SIZE 0x2000//512M |
| #define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE |
| #endif |
| |
| #define BLDCFG_IOMMU_SUPPORT FALSE |
| |
| #define BLDCFG_CFG_GNB_HD_AUDIO TRUE |
| //#define BLDCFG_IGPU_SUBSYSTEM_ID OEM_IGPU_SSID |
| //#define BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID OEM_IGPU_HD_AUDIO_SSID |
| //#define BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID OEM_APU_PCIE_PORTS_SSID |
| |
| /* Process the options... |
| * This file include MUST occur AFTER the user option selection settings |
| */ |
| #define AGESA_ENTRY_INIT_RESET TRUE |
| #define AGESA_ENTRY_INIT_RECOVERY FALSE |
| #define AGESA_ENTRY_INIT_EARLY TRUE |
| #define AGESA_ENTRY_INIT_POST TRUE |
| #define AGESA_ENTRY_INIT_ENV TRUE |
| #define AGESA_ENTRY_INIT_MID TRUE |
| #define AGESA_ENTRY_INIT_LATE TRUE |
| #define AGESA_ENTRY_INIT_S3SAVE TRUE |
| #define AGESA_ENTRY_INIT_RESUME TRUE //TRUE |
| #define AGESA_ENTRY_INIT_LATE_RESTORE TRUE |
| #define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE |
| /* |
| * Customized OEM build configurations for FCH component |
| */ |
| // #define BLDCFG_SMBUS0_BASE_ADDRESS 0xB00 |
| // #define BLDCFG_SMBUS1_BASE_ADDRESS 0xB20 |
| // #define BLDCFG_SIO_PME_BASE_ADDRESS 0xE00 |
| // #define BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS 0x400 |
| // #define BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS 0x404 |
| // #define BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS 0x408 |
| // #define BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS 0x410 |
| // #define BLDCFG_ACPI_GPE0_BLOCK_ADDRESS 0x420 |
| // #define BLDCFG_SPI_BASE_ADDRESS 0xFEC10000 |
| // #define BLDCFG_WATCHDOG_TIMER_BASE 0xFEC00000 |
| // #define BLDCFG_HPET_BASE_ADDRESS 0xFED00000 |
| // #define BLDCFG_SMI_CMD_PORT_ADDRESS 0xB0 |
| // #define BLDCFG_ACPI_PMA_BLK_ADDRESS 0xFE00 |
| // #define BLDCFG_ROM_BASE_ADDRESS 0xFED61000 |
| // #define BLDCFG_AZALIA_SSID 0x780D1022 |
| // #define BLDCFG_SMBUS_SSID 0x780B1022 |
| // #define BLDCFG_IDE_SSID 0x780C1022 |
| // #define BLDCFG_SATA_AHCI_SSID 0x78011022 |
| // #define BLDCFG_SATA_IDE_SSID 0x78001022 |
| // #define BLDCFG_SATA_RAID5_SSID 0x78031022 |
| // #define BLDCFG_SATA_RAID_SSID 0x78021022 |
| // #define BLDCFG_EHCI_SSID 0x78081022 |
| // #define BLDCFG_OHCI_SSID 0x78071022 |
| // #define BLDCFG_LPC_SSID 0x780E1022 |
| // #define BLDCFG_SD_SSID 0x78061022 |
| // #define BLDCFG_XHCI_SSID 0x78121022 |
| // #define BLDCFG_FCH_PORT80_BEHIND_PCIB FALSE |
| // #define BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE |
| // #define BLDCFG_FCH_GPP_LINK_CONFIG PortA4 |
| // #define BLDCFG_FCH_GPP_PORT0_PRESENT FALSE |
| // #define BLDCFG_FCH_GPP_PORT1_PRESENT FALSE |
| // #define BLDCFG_FCH_GPP_PORT2_PRESENT FALSE |
| // #define BLDCFG_FCH_GPP_PORT3_PRESENT FALSE |
| // #define BLDCFG_FCH_GPP_PORT0_HOTPLUG FALSE |
| // #define BLDCFG_FCH_GPP_PORT1_HOTPLUG FALSE |
| // #define BLDCFG_FCH_GPP_PORT2_HOTPLUG FALSE |
| // #define BLDCFG_FCH_GPP_PORT3_HOTPLUG FALSE |
| |
| CONST AP_MTRR_SETTINGS ROMDATA TrinityApMtrrSettingsList[] = |
| { |
| { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E }, |
| { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E }, |
| { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000 }, |
| { AMD_AP_MTRR_FIX4k_C0000, 0x0000000000000000 }, |
| { AMD_AP_MTRR_FIX4k_C8000, 0x0000000000000000 }, |
| { AMD_AP_MTRR_FIX4k_D0000, 0x0000000000000000 }, |
| { AMD_AP_MTRR_FIX4k_D8000, 0x0000000000000000 }, |
| { AMD_AP_MTRR_FIX4k_E0000, 0x1818181818181818 }, |
| { AMD_AP_MTRR_FIX4k_E8000, 0x1818181818181818 }, |
| { AMD_AP_MTRR_FIX4k_F0000, 0x1818181818181818 }, |
| { AMD_AP_MTRR_FIX4k_F8000, 0x1818181818181818 }, |
| { CPU_LIST_TERMINAL } |
| }; |
| |
| #define BLDCFG_AP_MTRR_SETTINGS_LIST &TrinityApMtrrSettingsList |
| |
| //#include "VirgoInstall.h" |
| |
| /* Include the files that instantiate the configuration definitions. */ |
| #include "cpuRegisters.h" |
| #include "cpuFamRegisters.h" |
| #include "cpuFamilyTranslation.h" |
| #include "AdvancedApi.h" |
| #include "heapManager.h" |
| #include "CreateStruct.h" |
| #include "cpuFeatures.h" |
| #include "Table.h" |
| #include "CommonReturns.h" |
| #include "cpuEarlyInit.h" |
| #include "cpuLateInit.h" |
| #include "GnbInterface.h" |
| |
| // This is the delivery package title, "BrazosPI" |
| // This string MUST be exactly 8 characters long |
| #define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'} |
| |
| // This is the release version number of the AGESA component |
| // This string MUST be exactly 12 characters long |
| #define AGESA_VERSION_STRING {'V', '0', '.', '0', '.', '0', '.', '1', ' ', ' ', ' ', ' '} |
| |
| /* MEMORY_BUS_SPEED */ |
| #define DDR400_FREQUENCY 200 ///< DDR 400 |
| #define DDR533_FREQUENCY 266 ///< DDR 533 |
| #define DDR667_FREQUENCY 333 ///< DDR 667 |
| #define DDR800_FREQUENCY 400 ///< DDR 800 |
| #define DDR1066_FREQUENCY 533 ///< DDR 1066 |
| #define DDR1333_FREQUENCY 667 ///< DDR 1333 |
| #define DDR1600_FREQUENCY 800 ///< DDR 1600 |
| #define DDR1866_FREQUENCY 933 ///< DDR 1866 |
| #define DDR2100_FREQUENCY 1050 ///< DDR 2100 |
| #define DDR2133_FREQUENCY 1066 ///< DDR 2133 |
| #define DDR2400_FREQUENCY 1200 ///< DDR 2400 |
| #define UNSUPPORTED_DDR_FREQUENCY 1201 ///< Highest limit of DDR frequency |
| |
| /* QUANDRANK_TYPE*/ |
| #define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM |
| #define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM |
| |
| /* USER_MEMORY_TIMING_MODE */ |
| #define TIMING_MODE_AUTO 0 ///< Use best rate possible |
| #define TIMING_MODE_LIMITED 1 ///< Set user top limit |
| #define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed |
| |
| /* POWER_DOWN_MODE */ |
| #define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode |
| #define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode |
| |
| /* |
| * Agesa optional capabilities selection. |
| * Uncomment and mark FALSE those features you wish to include in the build. |
| * Comment out or mark TRUE those features you want to REMOVE from the build. |
| */ |
| |
| #define DFLT_SMBUS0_BASE_ADDRESS 0xB00 |
| #define DFLT_SMBUS1_BASE_ADDRESS 0xB20 |
| #define DFLT_SIO_PME_BASE_ADDRESS 0xE00 |
| #define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS 0x800 |
| #define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS 0x804 |
| #define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS 0x808 |
| #define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS 0x810 |
| #define DFLT_ACPI_GPE0_BLOCK_ADDRESS 0x820 |
| #define DFLT_SPI_BASE_ADDRESS 0xFEC10000 |
| #define DFLT_WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0 |
| #define DFLT_HPET_BASE_ADDRESS 0xFED00000 |
| #define DFLT_SMI_CMD_PORT 0xB0 |
| #define DFLT_ACPI_PMA_CNT_BLK_ADDRESS 0xFE00 |
| #define DFLT_GEC_BASE_ADDRESS 0xFED61000 |
| #define DFLT_AZALIA_SSID 0x780D1022 |
| #define DFLT_SMBUS_SSID 0x780B1022 |
| #define DFLT_IDE_SSID 0x780C1022 |
| #define DFLT_SATA_AHCI_SSID 0x78011022 |
| #define DFLT_SATA_IDE_SSID 0x78001022 |
| #define DFLT_SATA_RAID5_SSID 0x78031022 |
| #define DFLT_SATA_RAID_SSID 0x78021022 |
| #define DFLT_EHCI_SSID 0x78081022 |
| #define DFLT_OHCI_SSID 0x78071022 |
| #define DFLT_LPC_SSID 0x780E1022 |
| #define DFLT_SD_SSID 0x78061022 |
| #define DFLT_XHCI_SSID 0x78121022 |
| #define DFLT_FCH_PORT80_BEHIND_PCIB FALSE |
| #define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE |
| #define DFLT_FCH_GPP_LINK_CONFIG PortA4 |
| #define DFLT_FCH_GPP_PORT0_PRESENT FALSE |
| #define DFLT_FCH_GPP_PORT1_PRESENT FALSE |
| #define DFLT_FCH_GPP_PORT2_PRESENT FALSE |
| #define DFLT_FCH_GPP_PORT3_PRESENT FALSE |
| #define DFLT_FCH_GPP_PORT0_HOTPLUG FALSE |
| #define DFLT_FCH_GPP_PORT1_HOTPLUG FALSE |
| #define DFLT_FCH_GPP_PORT2_HOTPLUG FALSE |
| #define DFLT_FCH_GPP_PORT3_HOTPLUG FALSE |
| //#define BLDCFG_IR_PIN_CONTROL 0x33 |
| #define FCH_NO_XHCI_SUPPORT TRUE |
| GPIO_CONTROL thatcher_gpio[] = { |
| {183, Function1, PullUpB}, |
| {-1} |
| }; |
| #define BLDCFG_FCH_GPIO_CONTROL_LIST (&thatcher_gpio[0]) |
| |
| // The following definitions specify the default values for various parameters in which there are |
| // no clearly defined defaults to be used in the common file. The values below are based on product |
| // and BKDG content, please consult the AGESA Memory team for consultation. |
| #define DFLT_SCRUB_DRAM_RATE (0) |
| #define DFLT_SCRUB_L2_RATE (0) |
| #define DFLT_SCRUB_L3_RATE (0) |
| #define DFLT_SCRUB_IC_RATE (0) |
| #define DFLT_SCRUB_DC_RATE (0) |
| #define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED |
| #define DFLT_VRM_SLEW_RATE (5000) |
| |
| #include "PlatformInstall.h" |
| |
| /*---------------------------------------------------------------------------------------- |
| * CUSTOMER OVERIDES MEMORY TABLE |
| *---------------------------------------------------------------------------------------- |
| */ |
| |
| /* |
| * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA |
| * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable |
| * is populated, AGESA will base its settings on the data from the table. Otherwise, it will |
| * use its default conservative settings. |
| */ |
| CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { |
| // |
| // The following macros are supported (use comma to separate macros): |
| // |
| // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) |
| // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. |
| // AGESA will base on this value to disable unused MemClk to save power. |
| // Example: |
| // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: |
| // Bit AM3/S1g3 pin name |
| // 0 M[B,A]_CLK_H/L[0] |
| // 1 M[B,A]_CLK_H/L[1] |
| // 2 M[B,A]_CLK_H/L[2] |
| // 3 M[B,A]_CLK_H/L[3] |
| // 4 M[B,A]_CLK_H/L[4] |
| // 5 M[B,A]_CLK_H/L[5] |
| // 6 M[B,A]_CLK_H/L[6] |
| // 7 M[B,A]_CLK_H/L[7] |
| // And platform has the following routing: |
| // CS0 M[B,A]_CLK_H/L[4] |
| // CS1 M[B,A]_CLK_H/L[2] |
| // CS2 M[B,A]_CLK_H/L[3] |
| // CS3 M[B,A]_CLK_H/L[5] |
| // Then platform can specify the following macro: |
| // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) |
| // |
| // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) |
| // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. |
| // AGESA will base on this value to tristate unused CKE to save power. |
| // |
| // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) |
| // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. |
| // AGESA will base on this value to tristate unused ODT pins to save power. |
| // |
| // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) |
| // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. |
| // AGESA will base on this value to tristate unused Chip select to save power. |
| // |
| // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) |
| // Specifies the number of DIMM slots per channel. |
| // |
| // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) |
| // Specifies the number of Chip selects per channel. |
| // |
| // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) |
| // Specifies the number of channels per socket. |
| // |
| // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) |
| // Specifies DDR bus speed of channel ChannelID on socket SocketID. |
| // |
| // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE) |
| // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) |
| // |
| // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, |
| // Byte6Seed, Byte7Seed, ByteEccSeed) |
| // Specifies the write leveling seed for a channel of a socket. |
| // |
| // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, |
| // Byte6Seed, Byte7Seed, ByteEccSeed) |
| // Speicifes the HW RXEN training seed for a channel of a socket |
| // |
| NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 1), |
| NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2), |
| MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), |
| CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x05, 0x0A), |
| ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00), |
| CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00), |
| |
| PSO_END |
| }; |
| |
| /* |
| * These tables are optional and may be used to adjust memory timing settings |
| */ |
| #include "mm.h" |
| #include "mn.h" |
| |
| // Customer table |
| UINT8 AGESA_MEM_TABLE_TN[][sizeof (MEM_TABLE_ALIAS)] = |
| { |
| // Hardcoded Memory Training Values |
| |
| // The following macro should be used to override training values for your platform |
| // |
| // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20), |
| // |
| // NOTE: |
| // The following training hardcode values are example values that were taken from a tilapia motherboard |
| // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in |
| // the table and replace the byte lane values with your own. |
| // |
| // ------------------ BYTE LANES ---------------------- |
| // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC |
| // Write Data Timing |
| // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0 |
| // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1 |
| // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0 |
| // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1 |
| |
| // DQS Receiver Enable |
| // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 |
| // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1 |
| // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0 |
| // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1 |
| |
| // Write DQS Delays |
| // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0 |
| // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1 |
| // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0 |
| // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1 |
| |
| // Read DQS Delays |
| // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0 |
| // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1 |
| // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0 |
| // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1 |
| //-------------------------------------------------------------------------------------------------------------------------------------------------- |
| // TABLE END |
| NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table |
| }; |
| UINT8 SizeOfTableTN = sizeof (AGESA_MEM_TABLE_TN) / sizeof (AGESA_MEM_TABLE_TN[0]); |
| |
| /* *************************************************************************** |
| * Optional User code to be included into the AGESA build |
| * These may be 32-bit call-out routines... |
| */ |
| //AGESA_STATUS |
| //AgesaReadSpd ( |
| // IN UINTN FcnData, |
| // IN OUT AGESA_READ_SPD_PARAMS *ReadSpd |
| // ) |
| //{ |
| // /* platform code to read an SPD... */ |
| // return Status; |
| //} |
