| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2007 Advanced Micro Devices, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <console/console.h> |
| #include <device/pci.h> |
| #include <device/pci_ids.h> |
| #include <string.h> |
| #include <stdint.h> |
| #if CONFIG_LOGICAL_CPUS |
| #include <cpu/amd/multicore.h> |
| #endif |
| |
| #include <cpu/amd/amdfam10_sysconf.h> |
| |
| #include <stdlib.h> |
| #include "mb_sysconf.h" |
| |
| /* Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables */ |
| struct mb_sysconf_t mb_sysconf; |
| |
| /* Here you only need to set value in pci1234 for HT-IO that could be |
| installed or not You may need to preset pci1234 for HTIO board, please |
| refer to src/northbridge/amd/amdfam10/get_sblk_pci1234.c for detail */ |
| static u32 pci1234x[] = { |
| 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, |
| 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, |
| 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, |
| 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, |
| 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, |
| 0x0000ffc, 0x0000ffc, |
| }; |
| |
| |
| /* HT Chain device num, actually it is unit id base of every ht device |
| in chain, assume every chain only have 4 ht device at most */ |
| |
| static unsigned hcdnx[] = { |
| 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, |
| 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, |
| 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, |
| 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, |
| 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, |
| 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, |
| 0x20202020, 0x20202020, |
| }; |
| |
| |
| |
| extern void get_pci1234(void); |
| |
| static u32 get_bus_conf_done = 0; |
| |
| static u32 get_hcid(u32 i) |
| { |
| u32 id = 0; |
| u32 busn = (sysconf.pci1234[i] >> 12) & 0xff; |
| u32 devn = sysconf.hcdn[i] & 0xff; |
| device_t dev; |
| |
| dev = dev_find_slot(busn, PCI_DEVFN(devn,0)); |
| |
| switch (dev->device) { |
| case 0x7458: //8132 |
| id = 1; |
| break; |
| case 0x7454: //8151 |
| id = 2; |
| break; |
| case 0x7450: //8131 |
| id = 3; |
| break; |
| } |
| // we may need more way to find out hcid: subsystem id? GPIO read ? |
| // we need use id for 1. bus num, 2. mptable, 3. acpi table |
| return id; |
| } |
| |
| void get_bus_conf(void) |
| { |
| u32 apicid_base; |
| |
| device_t dev; |
| int i, j; |
| struct mb_sysconf_t *m; |
| |
| if(get_bus_conf_done == 1) |
| return; //do it only once |
| |
| get_bus_conf_done = 1; |
| |
| sysconf.mb = &mb_sysconf; |
| |
| m = sysconf.mb; |
| |
| sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); |
| for(i=0;i<sysconf.hc_possible_num; i++) { |
| sysconf.pci1234[i] = pci1234x[i]; |
| sysconf.hcdn[i] = hcdnx[i]; |
| } |
| |
| get_pci1234(); |
| |
| sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; |
| m->sbdn3 = sysconf.hcdn[0] & 0xff; |
| |
| m->bus_8132_0 = (sysconf.pci1234[0] >> 12) & 0xff; |
| m->bus_8111_0 = m->bus_8132_0; |
| |
| /* 8111 */ |
| dev = dev_find_slot(m->bus_8111_0, PCI_DEVFN(sysconf.sbdn,0)); |
| if (dev) { |
| m->bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); |
| } else { |
| printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8111_0, sysconf.sbdn); |
| } |
| |
| /* 8132-1 */ |
| dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3,0)); |
| if (dev) { |
| m->bus_8132_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); |
| } else { |
| printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3); |
| } |
| |
| /* 8132-2 */ |
| dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3+1,0)); |
| if (dev) { |
| m->bus_8132_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); |
| } else { |
| printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3+1); |
| } |
| |
| /* HT chain 1 */ |
| j=0; |
| for(i=1; i< sysconf.hc_possible_num; i++) { |
| if(!(sysconf.pci1234[i] & 0x1) ) continue; |
| |
| // check hcid type here |
| sysconf.hcid[i] = get_hcid(i); |
| |
| switch(sysconf.hcid[i]) { |
| |
| case 1: //8132 |
| case 3: //8131 |
| |
| m->bus_8132a[j][0] = (sysconf.pci1234[i] >> 12) & 0xff; |
| |
| m->sbdn3a[j] = sysconf.hcdn[i] & 0xff; |
| |
| /* 8132-1 */ |
| dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j],0)); |
| if (dev) { |
| m->bus_8132a[j][1] = pci_read_config8(dev, PCI_SECONDARY_BUS); |
| } else { |
| printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132a[j][0], m->sbdn3a[j]); |
| } |
| |
| /* 8132-2 */ |
| dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j]+1,0)); |
| if (dev) { |
| m->bus_8132a[j][2] = pci_read_config8(dev, PCI_SECONDARY_BUS); |
| } else { |
| printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132a[j][0], m->sbdn3a[j]+1); |
| } |
| |
| break; |
| |
| case 2: //8151 |
| |
| m->bus_8151[j][0] = (sysconf.pci1234[i] >> 12) & 0xff; |
| m->sbdn5[j] = sysconf.hcdn[i] & 0xff; |
| /* 8151 */ |
| dev = dev_find_slot(m->bus_8151[j][0], PCI_DEVFN(m->sbdn5[j]+1, 0)); |
| |
| if (dev) { |
| m->bus_8151[j][1] = pci_read_config8(dev, PCI_SECONDARY_BUS); |
| } else { |
| printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8151[j][0], m->sbdn5[j]+1); |
| } |
| |
| break; |
| } |
| |
| j++; |
| } |
| |
| /*I/O APICs: APIC ID Version State Address*/ |
| apicid_base = 0; |
| m->apicid_8111 = apicid_base + 0; |
| m->apicid_8132_1 = apicid_base + 1; |
| m->apicid_8132_2 = apicid_base + 2; |
| for(i=0;i<j;i++) { |
| m->apicid_8132a[i][0] = apicid_base + 3 + i * 2; |
| m->apicid_8132a[i][1] = apicid_base + 3 + i * 2 + 1; |
| } |
| } |