src/mainboard/amd/parmer/BiosCallOuts.c - mirrors/cros/chromiumos/third_party/coreboot - Git at Google

 /*
  * This file is part of the coreboot project.
  *
  * Copyright (C) 2012 Advanced Micro Devices, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  */

 #include "agesawrapper.h"
 #include "amdlib.h"
 #include "BiosCallOuts.h"
 #include "Ids.h"
 #include "OptionsIds.h"
 #include "heapManager.h"
 #include "FchPlatform.h"
 #include "cbfs.h"

 STATIC CONST BIOS_CALLOUT_STRUCT BiosCallouts[] =
 {
 	{AGESA_ALLOCATE_BUFFER,          fam15tn_AllocateBuffer },
 	{AGESA_DEALLOCATE_BUFFER,        fam15tn_DeallocateBuffer },
 	{AGESA_DO_RESET,                 fam15tn_Reset },
 	{AGESA_LOCATE_BUFFER,            fam15tn_LocateBuffer },
 	{AGESA_READ_SPD,                 fam15tn_ReadSpd },
 	{AGESA_READ_SPD_RECOVERY,        fam15tn_DefaultRet },
 	{AGESA_RUNFUNC_ONAP,             fam15tn_RunFuncOnAp },
 	{AGESA_GET_IDS_INIT_DATA,        fam15tn_GetIdsInitData },
 	{AGESA_HOOKBEFORE_DQS_TRAINING,  fam15tn_HookBeforeDQSTraining },
 	{AGESA_HOOKBEFORE_EXIT_SELF_REF, fam15tn_HookBeforeExitSelfRefresh },
 	{AGESA_FCH_OEM_CALLOUT,          Fch_Oem_config },
 	{AGESA_GNB_GFX_GET_VBIOS_IMAGE,  fam15tn_HookGfxGetVbiosImage }
 };

 AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
 {
 	UINTN i;
 	AGESA_STATUS CalloutStatus;
 	UINTN CallOutCount = sizeof (BiosCallouts) / sizeof (BiosCallouts [0]);

 	for (i = 0; i < CallOutCount; i++)
 	{
 		if (BiosCallouts[i].CalloutName == Func)
 			break;
 	}

 	if(i >= CallOutCount)
 		return AGESA_UNSUPPORTED;

 	CalloutStatus = BiosCallouts[i].CalloutPtr (Func, Data, ConfigPtr);

 	return CalloutStatus;
 }

 /**
  * AMD Parmer Platform ALC272 Verb Table
  */
 const CODEC_ENTRY Parmer_Alc272_VerbTbl[] = {
 	{0x11, 0x411111F0},
 	{0x12, 0x411111F0},
 	{0x13, 0x411111F0},
 	{0x14, 0x411111F0},
 	{0x15, 0x411111F0},
 	{0x16, 0x411111F0},
 	{0x17, 0x411111F0},
 	{0x18, 0x01a19840},
 	{0x19, 0x411111F0},
 	{0x1a, 0x01813030},
 	{0x1b, 0x411111F0},
 	{0x1d, 0x40130605},
 	{0x1e, 0x01441120},
 	{0x21, 0x01211010},
 	{0xff, 0xffffffff}
 };

 const CODEC_TBL_LIST ParmerCodecTableList[] =
 {
 	{0x10ec0272, (CODEC_ENTRY*)&Parmer_Alc272_VerbTbl[0]},
 	{(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL}
 };

 #define FAN_INPUT_INTERNAL_DIODE	0
 #define FAN_INPUT_TEMP0			1
 #define FAN_INPUT_TEMP1			2
 #define FAN_INPUT_TEMP2			3
 #define FAN_INPUT_TEMP3			4
 #define FAN_INPUT_TEMP0_FILTER		5
 #define FAN_INPUT_ZERO			6
 #define FAN_INPUT_DISABLED		7

 #define FAN_AUTOMODE			(1 << 0)
 #define FAN_LINEARMODE			(1 << 1)
 #define FAN_STEPMODE			~(1 << 1)
 #define FAN_POLARITY_HIGH		(1 << 2)
 #define FAN_POLARITY_LOW		~(1 << 2)

 /* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */
 #define FREQ_28KHZ			0x0
 #define FREQ_25KHZ			0x1
 #define FREQ_23KHZ			0x2
 #define FREQ_21KHZ			0x3
 #define FREQ_29KHZ			0x4
 #define FREQ_18KHZ			0x5
 #define FREQ_100HZ			0xF7
 #define FREQ_87HZ			0xF8
 #define FREQ_58HZ			0xF9
 #define FREQ_44HZ			0xFA
 #define FREQ_35HZ			0xFB
 #define FREQ_29HZ			0xFC
 #define FREQ_22HZ			0xFD
 #define FREQ_14HZ			0xFE
 #define FREQ_11HZ			0xFF

 /* Parmer Hardware Monitor Fan Control
  * Hardware limitation:
  *  HWM failed to read the input temperture vi I2C,
  *  if other software switch the I2C switch by mistake or intention.
  *  We recommend to using IMC to control Fans, instead of HWM.
  */
 static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
 {
 	FCH_HWM_FAN_CTR oem_factl[5] = {
 		/*temperatuer input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */
 		/* Parmer FanOUT0 Fan header J32 */
 		{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60,  0, 40, 65, 85, 0, 0},
 		/* Parmer FanOUT1 Fan header J31*/
 		{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60,  0, 40, 65, 85, 0, 0},
 		{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60,  0, 40, 65, 85, 0, 0},
 		{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60,  0, 40, 65, 85, 0, 0},
 		{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60,  0, 40, 65, 85, 0, 0},
 	};
 	LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof (FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader);

 	/* Enable IMC fan control. the recommand way */
 #if defined CONFIG_HUDSON_IMC_FWM && (CONFIG_HUDSON_IMC_FWM == 1)
 	/* HwMonitorEnable = TRUE &&  HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
 	FchParams->Hwm.HwMonitorEnable = TRUE;
 	FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */

 	FchParams->Imc.ImcEnable = TRUE;
 	FchParams->Hwm.HwmControl = 1;	/* 1 IMC, 0 HWM */
 	FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */

 	LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);

 	/* Thermal Zone Parameter */
 	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
 	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00;	/* Zone */
 	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x00; //BIT0 | BIT2 | BIT5;
 	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x00;//6 | BIT3;
 	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
 	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x00;
 	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98;	/* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
 	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 2;
 	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0;	/* PWM steping rate in unit of PWM level percentage */
 	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0;

 	/* IMC Fan Policy temperature thresholds */
 	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
 	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00;	/* Zone */
 	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0;///80;	/*AC0 threshold in Celsius */
 	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0;	/*AC1 threshold in Celsius */
 	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0;	/*AC2 threshold in Celsius */
 	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0;	/*AC3 threshold in Celsius, 0xFF is not define */
 	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0;	/*AC4 threshold in Celsius, 0xFF is not define */
 	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0;	/*AC5 threshold in Celsius, 0xFF is not define */
 	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0;	/*AC6 threshold in Celsius, 0xFF is not define */
 	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0;	/*AC7 lowest threshold in Celsius, 0xFF is not define */
 	FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0;	/*critical threshold* in Celsius, 0xFF is not define */
 	FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;

 	/* IMC Fan Policy PWM Settings */
 	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
 	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00;	/* Zone */
 	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0;	/* AL0 percentage */
 	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0;	/* AL1 percentage */
 	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0;	/* AL2 percentage */
 	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0x00;	/* AL3 percentage */
 	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0x00;	/* AL4 percentage */
 	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0x00;	/* AL5 percentage */
 	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0x00;	/* AL6 percentage */
 	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0x00;	/* AL7 percentage */

 	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00;
 	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01;	/* Zone */
 	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55;//BIT0 | BIT2 | BIT5;
 	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17;
 	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00;
 	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00;
 	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90;	/* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
 	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0;
 	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0;	/* PWM steping rate in unit of PWM level percentage */
 	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0;

 	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00;
 	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01;	/* zone */
 	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60;	/*AC0 threshold in Celsius */
 	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40;	/*AC1 threshold in Celsius */
 	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0;	/*AC2 threshold in Celsius */
 	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0;	/*AC3 threshold in Celsius, 0xFF is not define */
 	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0;	/*AC4 threshold in Celsius, 0xFF is not define */
 	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0;	/*AC5 threshold in Celsius, 0xFF is not define */
 	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0;	/*AC6 threshold in Celsius, 0xFF is not define */
 	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0;	/*AC7 lowest threshold in Celsius, 0xFF is not define */
 	FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0;	/*critical threshold* in Celsius, 0xFF is not define */
 	FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00;

 	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00;
 	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01;	/*Zone */
 	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0;	/* AL0 percentage */
 	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0;	/* AL1 percentage */
 	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0;	/* AL2 percentage */
 	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00;	/* AL3 percentage */
 	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00;	/* AL4 percentage */
 	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00;	/* AL5 percentage */
 	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00;	/* AL6 percentage */
 	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00;	/* AL7 percentage */

 	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00;
 	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2;	/* Zone */
 	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5;
 	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0;
 	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00;
 	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00;
 	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98;	/* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
 	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2;
 	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5;	/* PWM steping rate in unit of PWM level percentage */
 	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0;

 	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00;
 	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3;	/* Zone */
 	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5;
 	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0;
 	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00;
 	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00;
 	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0;	/* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
 	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0;
 	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0;	/* PWM steping rate in unit of PWM level percentage */
 	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0;

 	/* IMC Function */
 	FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333;//BIT0 | BIT4 |BIT8;

 	/* NOTE:
 	 * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
 	 * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
 	 * so we remove it from AGESA code. Please Seee FchInitLateHwm.
 	 */

 #else /* HWM fan control, the way not recommand */
 	FchParams->Imc.ImcEnable = FALSE;
 	FchParams->Hwm.HwMonitorEnable = TRUE;
 	FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */

 #endif /* CONFIG_HUDSON_IMC_FWM */
 }

 /**
  * Fch Oem setting callback
  *
  *  Configure platform specific Hudson device,
  *   such Azalia, SATA, GEC, IMC etc.
  */
 AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr)
 {
 	FCH_RESET_DATA_BLOCK *FchParams = (FCH_RESET_DATA_BLOCK *)FchData;

 	if (FchParams->StdHeader->Func == AMD_INIT_RESET) {
 		FCH_RESET_DATA_BLOCK *FchParams_reset =  (FCH_RESET_DATA_BLOCK *) FchData;
 		printk(BIOS_DEBUG, "Fch OEM config in INIT RESET ");
 		//FchParams_reset->EcChannel0 = TRUE; /* logical devicd 3 */
 #if CONFIG_HUDSON_LEGACY_FREE
 		FchParams_reset->LegacyFree = 1;
 #endif
 	} else if (FchParams->StdHeader->Func == AMD_INIT_ENV) {
 		FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData;
 		printk(BIOS_DEBUG, "Fch OEM config in INIT ENV ");

 		/* Azalia Controller OEM Codec Table Pointer */
 		FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&ParmerCodecTableList[0]);
 		/* Azalia Controller Front Panel OEM Table Pointer */

 		/* Fan Control */
 		oem_fan_control(FchParams_env);

 		/* sata configuration */
 	}
 	printk(BIOS_DEBUG, "Done\n");

 	return AGESA_SUCCESS;
 }
	/*
	* This file is part of the coreboot project.
	*
	* Copyright (C) 2012 Advanced Micro Devices, Inc.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; version 2 of the License.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
	*/

	#include "agesawrapper.h"
	#include "amdlib.h"
	#include "BiosCallOuts.h"
	#include "Ids.h"
	#include "OptionsIds.h"
	#include "heapManager.h"
	#include "FchPlatform.h"
	#include "cbfs.h"

	STATIC CONST BIOS_CALLOUT_STRUCT BiosCallouts[] =
	{
	{AGESA_ALLOCATE_BUFFER, fam15tn_AllocateBuffer },
	{AGESA_DEALLOCATE_BUFFER, fam15tn_DeallocateBuffer },
	{AGESA_DO_RESET, fam15tn_Reset },
	{AGESA_LOCATE_BUFFER, fam15tn_LocateBuffer },
	{AGESA_READ_SPD, fam15tn_ReadSpd },
	{AGESA_READ_SPD_RECOVERY, fam15tn_DefaultRet },
	{AGESA_RUNFUNC_ONAP, fam15tn_RunFuncOnAp },
	{AGESA_GET_IDS_INIT_DATA, fam15tn_GetIdsInitData },
	{AGESA_HOOKBEFORE_DQS_TRAINING, fam15tn_HookBeforeDQSTraining },
	{AGESA_HOOKBEFORE_EXIT_SELF_REF, fam15tn_HookBeforeExitSelfRefresh },
	{AGESA_FCH_OEM_CALLOUT, Fch_Oem_config },
	{AGESA_GNB_GFX_GET_VBIOS_IMAGE, fam15tn_HookGfxGetVbiosImage }
	};

	AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
	{
	UINTN i;
	AGESA_STATUS CalloutStatus;
	UINTN CallOutCount = sizeof (BiosCallouts) / sizeof (BiosCallouts [0]);

	for (i = 0; i < CallOutCount; i++)
	{
	if (BiosCallouts[i].CalloutName == Func)
	break;
	}

	if(i >= CallOutCount)
	return AGESA_UNSUPPORTED;

	CalloutStatus = BiosCallouts[i].CalloutPtr (Func, Data, ConfigPtr);

	return CalloutStatus;
	}

	/**
	* AMD Parmer Platform ALC272 Verb Table
	*/
	const CODEC_ENTRY Parmer_Alc272_VerbTbl[] = {
	{0x11, 0x411111F0},
	{0x12, 0x411111F0},
	{0x13, 0x411111F0},
	{0x14, 0x411111F0},
	{0x15, 0x411111F0},
	{0x16, 0x411111F0},
	{0x17, 0x411111F0},
	{0x18, 0x01a19840},
	{0x19, 0x411111F0},
	{0x1a, 0x01813030},
	{0x1b, 0x411111F0},
	{0x1d, 0x40130605},
	{0x1e, 0x01441120},
	{0x21, 0x01211010},
	{0xff, 0xffffffff}
	};

	const CODEC_TBL_LIST ParmerCodecTableList[] =
	{
	{0x10ec0272, (CODEC_ENTRY*)&Parmer_Alc272_VerbTbl[0]},
	{(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL}
	};

	#define FAN_INPUT_INTERNAL_DIODE 0
	#define FAN_INPUT_TEMP0 1
	#define FAN_INPUT_TEMP1 2
	#define FAN_INPUT_TEMP2 3
	#define FAN_INPUT_TEMP3 4
	#define FAN_INPUT_TEMP0_FILTER 5
	#define FAN_INPUT_ZERO 6
	#define FAN_INPUT_DISABLED 7

	#define FAN_AUTOMODE (1 << 0)
	#define FAN_LINEARMODE (1 << 1)
	#define FAN_STEPMODE ~(1 << 1)
	#define FAN_POLARITY_HIGH (1 << 2)
	#define FAN_POLARITY_LOW ~(1 << 2)

	/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */
	#define FREQ_28KHZ 0x0
	#define FREQ_25KHZ 0x1
	#define FREQ_23KHZ 0x2
	#define FREQ_21KHZ 0x3
	#define FREQ_29KHZ 0x4
	#define FREQ_18KHZ 0x5
	#define FREQ_100HZ 0xF7
	#define FREQ_87HZ 0xF8
	#define FREQ_58HZ 0xF9
	#define FREQ_44HZ 0xFA
	#define FREQ_35HZ 0xFB
	#define FREQ_29HZ 0xFC
	#define FREQ_22HZ 0xFD
	#define FREQ_14HZ 0xFE
	#define FREQ_11HZ 0xFF

	/* Parmer Hardware Monitor Fan Control
	* Hardware limitation:
	* HWM failed to read the input temperture vi I2C,
	* if other software switch the I2C switch by mistake or intention.
	* We recommend to using IMC to control Fans, instead of HWM.
	*/
	static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
	{
	FCH_HWM_FAN_CTR oem_factl[5] = {
	/temperatuer input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount /
	/* Parmer FanOUT0 Fan header J32 */
	{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE \| FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
	/* Parmer FanOUT1 Fan header J31*/
	{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE \| FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
	{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE \| FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
	{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE \| FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
	{FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE \| FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
	};
	LibAmdMemCopy ((VOID )(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof (FCH_HWM_FAN_CTR) 5), FchParams->StdHeader);

	/* Enable IMC fan control. the recommand way */
	#if defined CONFIG_HUDSON_IMC_FWM && (CONFIG_HUDSON_IMC_FWM == 1)
	/* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
	FchParams->Hwm.HwMonitorEnable = TRUE;
	FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */

	FchParams->Imc.ImcEnable = TRUE;
	FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
	FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */

	LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);

	/* Thermal Zone Parameter */
	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x00; //BIT0 \| BIT2 \| BIT5;
	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x00;//6 \| BIT3;
	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x00;
	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 2;
	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
	FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0;

	/* IMC Fan Policy temperature thresholds */
	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0;///80; /AC0 threshold in Celsius /
	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0; /AC1 threshold in Celsius /
	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0; /AC2 threshold in Celsius /
	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0; /AC3 threshold in Celsius, 0xFF is not define /
	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0; /AC4 threshold in Celsius, 0xFF is not define /
	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0; /AC5 threshold in Celsius, 0xFF is not define /
	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0; /AC6 threshold in Celsius, 0xFF is not define /
	FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0; /AC7 lowest threshold in Celsius, 0xFF is not define /
	FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0; /critical threshold in Celsius, 0xFF is not define */
	FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;

	/* IMC Fan Policy PWM Settings */
	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0; /* AL0 percentage */
	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0; /* AL1 percentage */
	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0; /* AL2 percentage */
	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0x00; /* AL3 percentage */
	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0x00; /* AL4 percentage */
	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0x00; /* AL5 percentage */
	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0x00; /* AL6 percentage */
	FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0x00; /* AL7 percentage */

	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00;
	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */
	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55;//BIT0 \| BIT2 \| BIT5;
	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17;
	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00;
	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00;
	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0;
	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
	FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0;

	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00;
	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* zone */
	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /AC0 threshold in Celsius /
	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /AC1 threshold in Celsius /
	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /AC2 threshold in Celsius /
	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /AC3 threshold in Celsius, 0xFF is not define /
	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /AC4 threshold in Celsius, 0xFF is not define /
	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /AC5 threshold in Celsius, 0xFF is not define /
	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /AC6 threshold in Celsius, 0xFF is not define /
	FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /AC7 lowest threshold in Celsius, 0xFF is not define /
	FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /critical threshold in Celsius, 0xFF is not define */
	FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00;

	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00;
	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /Zone /
	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */
	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */
	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */
	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */
	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */
	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */
	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */
	FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */

	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00;
	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */
	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0;//BIT0 \| BIT2 \| BIT5;
	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0;
	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00;
	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00;
	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2;
	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM steping rate in unit of PWM level percentage */
	FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0;

	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00;
	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */
	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0;//BIT0 \| BIT2 \| BIT5;
	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0;
	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00;
	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00;
	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0;
	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
	FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0;

	/* IMC Function */
	FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333;//BIT0 \| BIT4 \|BIT8;

	/* NOTE:
	* FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
	* AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
	* so we remove it from AGESA code. Please Seee FchInitLateHwm.
	*/

	#else /* HWM fan control, the way not recommand */
	FchParams->Imc.ImcEnable = FALSE;
	FchParams->Hwm.HwMonitorEnable = TRUE;
	FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */

	#endif /* CONFIG_HUDSON_IMC_FWM */
	}

	/**
	* Fch Oem setting callback
	*
	* Configure platform specific Hudson device,
	* such Azalia, SATA, GEC, IMC etc.
	*/
	AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr)
	{
	FCH_RESET_DATA_BLOCK FchParams = (FCH_RESET_DATA_BLOCK )FchData;

	if (FchParams->StdHeader->Func == AMD_INIT_RESET) {
	FCH_RESET_DATA_BLOCK FchParams_reset = (FCH_RESET_DATA_BLOCK ) FchData;
	printk(BIOS_DEBUG, "Fch OEM config in INIT RESET ");
	//FchParams_reset->EcChannel0 = TRUE; /* logical devicd 3 */
	#if CONFIG_HUDSON_LEGACY_FREE
	FchParams_reset->LegacyFree = 1;
	#endif
	} else if (FchParams->StdHeader->Func == AMD_INIT_ENV) {
	FCH_DATA_BLOCK FchParams_env = (FCH_DATA_BLOCK )FchData;
	printk(BIOS_DEBUG, "Fch OEM config in INIT ENV ");

	/* Azalia Controller OEM Codec Table Pointer */
	FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&ParmerCodecTableList[0]);
	/* Azalia Controller Front Panel OEM Table Pointer */

	/* Fan Control */
	oem_fan_control(FchParams_env);

	/* sata configuration */
	}
	printk(BIOS_DEBUG, "Done\n");

	return AGESA_SUCCESS;
	}