| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2008 Advanced Micro Devices, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| static void setup_kt690_resource_map(void) |
| { |
| static const unsigned int register_values[] = { |
| /* Careful set limit registers before base registers which contain the enables */ |
| /* DRAM Limit i Registers |
| * F1:0x44 i = 0 |
| * F1:0x4C i = 1 |
| * F1:0x54 i = 2 |
| * F1:0x5C i = 3 |
| * F1:0x64 i = 4 |
| * F1:0x6C i = 5 |
| * F1:0x74 i = 6 |
| * F1:0x7C i = 7 |
| * [ 2: 0] Destination Node ID |
| * 000 = Node 0 |
| * 001 = Node 1 |
| * 010 = Node 2 |
| * 011 = Node 3 |
| * 100 = Node 4 |
| * 101 = Node 5 |
| * 110 = Node 6 |
| * 111 = Node 7 |
| * [ 7: 3] Reserved |
| * [10: 8] Interleave select |
| * specifies the values of A[14:12] to use with interleave enable. |
| * [15:11] Reserved |
| * [31:16] DRAM Limit Address i Bits 39-24 |
| * This field defines the upper address bits of a 40 bit address |
| * that define the end of the DRAM region. |
| */ |
| PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, |
| PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, |
| PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, |
| PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, |
| PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, |
| PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, |
| PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, |
| /* DRAM Base i Registers |
| * F1:0x40 i = 0 |
| * F1:0x48 i = 1 |
| * F1:0x50 i = 2 |
| * F1:0x58 i = 3 |
| * F1:0x60 i = 4 |
| * F1:0x68 i = 5 |
| * F1:0x70 i = 6 |
| * F1:0x78 i = 7 |
| * [ 0: 0] Read Enable |
| * 0 = Reads Disabled |
| * 1 = Reads Enabled |
| * [ 1: 1] Write Enable |
| * 0 = Writes Disabled |
| * 1 = Writes Enabled |
| * [ 7: 2] Reserved |
| * [10: 8] Interleave Enable |
| * 000 = No interleave |
| * 001 = Interleave on A[12] (2 nodes) |
| * 010 = reserved |
| * 011 = Interleave on A[12] and A[14] (4 nodes) |
| * 100 = reserved |
| * 101 = reserved |
| * 110 = reserved |
| * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) |
| * [15:11] Reserved |
| * [13:16] DRAM Base Address i Bits 39-24 |
| * This field defines the upper address bits of a 40-bit address |
| * that define the start of the DRAM region. |
| */ |
| PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, |
| |
| /* Memory-Mapped I/O Limit i Registers |
| * F1:0x84 i = 0 |
| * F1:0x8C i = 1 |
| * F1:0x94 i = 2 |
| * F1:0x9C i = 3 |
| * F1:0xA4 i = 4 |
| * F1:0xAC i = 5 |
| * F1:0xB4 i = 6 |
| * F1:0xBC i = 7 |
| * [ 2: 0] Destination Node ID |
| * 000 = Node 0 |
| * 001 = Node 1 |
| * 010 = Node 2 |
| * 011 = Node 3 |
| * 100 = Node 4 |
| * 101 = Node 5 |
| * 110 = Node 6 |
| * 111 = Node 7 |
| * [ 3: 3] Reserved |
| * [ 5: 4] Destination Link ID |
| * 00 = Link 0 |
| * 01 = Link 1 |
| * 10 = Link 2 |
| * 11 = Reserved |
| * [ 6: 6] Reserved |
| * [ 7: 7] Non-Posted |
| * 0 = CPU writes may be posted |
| * 1 = CPU writes must be non-posted |
| * [31: 8] Memory-Mapped I/O Limit Address i (39-16) |
| * This field defines the upp adddress bits of a 40-bit address that |
| * defines the end of a memory-mapped I/O region n |
| */ |
| PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, |
| |
| /* Memory-Mapped I/O Base i Registers |
| * F1:0x80 i = 0 |
| * F1:0x88 i = 1 |
| * F1:0x90 i = 2 |
| * F1:0x98 i = 3 |
| * F1:0xA0 i = 4 |
| * F1:0xA8 i = 5 |
| * F1:0xB0 i = 6 |
| * F1:0xB8 i = 7 |
| * [ 0: 0] Read Enable |
| * 0 = Reads disabled |
| * 1 = Reads Enabled |
| * [ 1: 1] Write Enable |
| * 0 = Writes disabled |
| * 1 = Writes Enabled |
| * [ 2: 2] Cpu Disable |
| * 0 = Cpu can use this I/O range |
| * 1 = Cpu requests do not use this I/O range |
| * [ 3: 3] Lock |
| * 0 = base/limit registers i are read/write |
| * 1 = base/limit registers i are read-only |
| * [ 7: 4] Reserved |
| * [31: 8] Memory-Mapped I/O Base Address i (39-16) |
| * This field defines the upper address bits of a 40bit address |
| * that defines the start of memory-mapped I/O region i |
| */ |
| PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, |
| |
| /* PCI I/O Limit i Registers |
| * F1:0xC4 i = 0 |
| * F1:0xCC i = 1 |
| * F1:0xD4 i = 2 |
| * F1:0xDC i = 3 |
| * [ 2: 0] Destination Node ID |
| * 000 = Node 0 |
| * 001 = Node 1 |
| * 010 = Node 2 |
| * 011 = Node 3 |
| * 100 = Node 4 |
| * 101 = Node 5 |
| * 110 = Node 6 |
| * 111 = Node 7 |
| * [ 3: 3] Reserved |
| * [ 5: 4] Destination Link ID |
| * 00 = Link 0 |
| * 01 = Link 1 |
| * 10 = Link 2 |
| * 11 = reserved |
| * [11: 6] Reserved |
| * [24:12] PCI I/O Limit Address i |
| * This field defines the end of PCI I/O region n |
| * [31:25] Reserved |
| */ |
| PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, |
| PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, |
| |
| /* PCI I/O Base i Registers |
| * F1:0xC0 i = 0 |
| * F1:0xC8 i = 1 |
| * F1:0xD0 i = 2 |
| * F1:0xD8 i = 3 |
| * [ 0: 0] Read Enable |
| * 0 = Reads Disabled |
| * 1 = Reads Enabled |
| * [ 1: 1] Write Enable |
| * 0 = Writes Disabled |
| * 1 = Writes Enabled |
| * [ 3: 2] Reserved |
| * [ 4: 4] VGA Enable |
| * 0 = VGA matches Disabled |
| * 1 = matches all address < 64K and where A[9:0] is in the |
| * range 3B0-3BB or 3C0-3DF independen of the base & limit registers |
| * [ 5: 5] ISA Enable |
| * 0 = ISA matches Disabled |
| * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block |
| * from matching agains this base/limit pair |
| * [11: 6] Reserved |
| * [24:12] PCI I/O Base i |
| * This field defines the start of PCI I/O region n |
| * [31:25] Reserved |
| */ |
| PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, |
| PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, |
| |
| /* Config Base and Limit i Registers |
| * F1:0xE0 i = 0 |
| * F1:0xE4 i = 1 |
| * F1:0xE8 i = 2 |
| * F1:0xEC i = 3 |
| * [ 0: 0] Read Enable |
| * 0 = Reads Disabled |
| * 1 = Reads Enabled |
| * [ 1: 1] Write Enable |
| * 0 = Writes Disabled |
| * 1 = Writes Enabled |
| * [ 2: 2] Device Number Compare Enable |
| * 0 = The ranges are based on bus number |
| * 1 = The ranges are ranges of devices on bus 0 |
| * [ 3: 3] Reserved |
| * [ 6: 4] Destination Node |
| * 000 = Node 0 |
| * 001 = Node 1 |
| * 010 = Node 2 |
| * 011 = Node 3 |
| * 100 = Node 4 |
| * 101 = Node 5 |
| * 110 = Node 6 |
| * 111 = Node 7 |
| * [ 7: 7] Reserved |
| * [ 9: 8] Destination Link |
| * 00 = Link 0 |
| * 01 = Link 1 |
| * 10 = Link 2 |
| * 11 - Reserved |
| * [15:10] Reserved |
| * [23:16] Bus Number Base i |
| * This field defines the lowest bus number in configuration region i |
| * [31:24] Bus Number Limit i |
| * This field defines the highest bus number in configuration regin i |
| */ |
| PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003, |
| PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, |
| PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, |
| }; |
| |
| int max; |
| max = ARRAY_SIZE(register_values); |
| setup_resource_map(register_values, max); |
| } |
