| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2008 Advanced Micro Devices, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| /* DefinitionBlock Statement */ |
| DefinitionBlock ( |
| "dsdt.aml", /* Output filename */ |
| "DSDT", /* Signature */ |
| 0x02, /* DSDT Revision, needs to be 2 for 64bit */ |
| "COREv2", /* OEMID */ |
| "COREBOOT", /* TABLE ID */ |
| 0x00010001 /* OEM Revision */ |
| ) |
| { /* Start of ASL file */ |
| /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */ |
| |
| /* Data to be patched by the BIOS during POST */ |
| /* FIXME the patching is not done yet! */ |
| /* Memory related values */ |
| Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */ |
| Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */ |
| Name(PBLN, 0x0) /* Length of BIOS area */ |
| |
| Name(PCBA, 0xE0000000) /* Base address of PCIe config space */ |
| Name(HPBA, 0xFED00000) /* Base address of HPET table */ |
| |
| Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */ |
| |
| /* USB overcurrent mapping pins. */ |
| Name(UOM0, 0) |
| Name(UOM1, 2) |
| Name(UOM2, 0) |
| Name(UOM3, 7) |
| Name(UOM4, 2) |
| Name(UOM5, 2) |
| Name(UOM6, 6) |
| Name(UOM7, 2) |
| Name(UOM8, 6) |
| Name(UOM9, 6) |
| |
| /* Some global data */ |
| Name(OSTP, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */ |
| Name(OSV, Ones) /* Assume nothing */ |
| Name(PMOD, One) /* Assume APIC */ |
| |
| /* PIC IRQ mapping registers, C00h-C01h */ |
| OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002) |
| Field(PRQM, ByteAcc, NoLock, Preserve) { |
| PRQI, 0x00000008, |
| PRQD, 0x00000008, /* Offset: 1h */ |
| } |
| IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) { |
| PINA, 0x00000008, /* Index 0 */ |
| PINB, 0x00000008, /* Index 1 */ |
| PINC, 0x00000008, /* Index 2 */ |
| PIND, 0x00000008, /* Index 3 */ |
| AINT, 0x00000008, /* Index 4 */ |
| SINT, 0x00000008, /* Index 5 */ |
| , 0x00000008, /* Index 6 */ |
| AAUD, 0x00000008, /* Index 7 */ |
| AMOD, 0x00000008, /* Index 8 */ |
| PINE, 0x00000008, /* Index 9 */ |
| PINF, 0x00000008, /* Index A */ |
| PING, 0x00000008, /* Index B */ |
| PINH, 0x00000008, /* Index C */ |
| } |
| |
| /* PCI Error control register */ |
| OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001) |
| Field(PERC, ByteAcc, NoLock, Preserve) { |
| SENS, 0x00000001, |
| PENS, 0x00000001, |
| SENE, 0x00000001, |
| PENE, 0x00000001, |
| } |
| |
| /* Client Management index/data registers */ |
| OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002) |
| Field(CMT, ByteAcc, NoLock, Preserve) { |
| CMTI, 8, |
| /* Client Management Data register */ |
| G64E, 1, |
| G64O, 1, |
| G32O, 2, |
| , 2, |
| GPSL, 2, |
| } |
| |
| /* GPM Port register */ |
| OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001) |
| Field(GPT, ByteAcc, NoLock, Preserve) { |
| GPB0,1, |
| GPB1,1, |
| GPB2,1, |
| GPB3,1, |
| GPB4,1, |
| GPB5,1, |
| GPB6,1, |
| GPB7,1, |
| } |
| |
| /* Flash ROM program enable register */ |
| OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001) |
| Field(FRE, ByteAcc, NoLock, Preserve) { |
| , 0x00000006, |
| FLRE, 0x00000001, |
| } |
| |
| /* PM2 index/data registers */ |
| OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002) |
| Field(PM2R, ByteAcc, NoLock, Preserve) { |
| PM2I, 0x00000008, |
| PM2D, 0x00000008, |
| } |
| |
| /* Power Management I/O registers */ |
| OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002) |
| Field(PIOR, ByteAcc, NoLock, Preserve) { |
| PIOI, 0x00000008, |
| PIOD, 0x00000008, |
| } |
| IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) { |
| Offset(0x00), /* MiscControl */ |
| , 1, |
| T1EE, 1, |
| T2EE, 1, |
| Offset(0x01), /* MiscStatus */ |
| , 1, |
| T1E, 1, |
| T2E, 1, |
| Offset(0x04), /* SmiWakeUpEventEnable3 */ |
| , 7, |
| SSEN, 1, |
| Offset(0x07), /* SmiWakeUpEventStatus3 */ |
| , 7, |
| CSSM, 1, |
| Offset(0x10), /* AcpiEnable */ |
| , 6, |
| PWDE, 1, |
| Offset(0x1C), /* ProgramIoEnable */ |
| , 3, |
| MKME, 1, |
| IO3E, 1, |
| IO2E, 1, |
| IO1E, 1, |
| IO0E, 1, |
| Offset(0x1D), /* IOMonitorStatus */ |
| , 3, |
| MKMS, 1, |
| IO3S, 1, |
| IO2S, 1, |
| IO1S, 1, |
| IO0S,1, |
| Offset(0x20), /* AcpiPmEvtBlk */ |
| APEB, 16, |
| Offset(0x36), /* GEvtLevelConfig */ |
| , 6, |
| ELC6, 1, |
| ELC7, 1, |
| Offset(0x37), /* GPMLevelConfig0 */ |
| , 3, |
| PLC0, 1, |
| PLC1, 1, |
| PLC2, 1, |
| PLC3, 1, |
| PLC8, 1, |
| Offset(0x38), /* GPMLevelConfig1 */ |
| , 1, |
| PLC4, 1, |
| PLC5, 1, |
| , 1, |
| PLC6, 1, |
| PLC7, 1, |
| Offset(0x3B), /* PMEStatus1 */ |
| GP0S, 1, |
| GM4S, 1, |
| GM5S, 1, |
| APS, 1, |
| GM6S, 1, |
| GM7S, 1, |
| GP2S, 1, |
| STSS, 1, |
| Offset(0x55), /* SoftPciRst */ |
| SPRE, 1, |
| , 1, |
| , 1, |
| PNAT, 1, |
| PWMK, 1, |
| PWNS, 1, |
| |
| /* Offset(0x61), */ /* Options_1 */ |
| /* ,7, */ |
| /* R617,1, */ |
| |
| Offset(0x65), /* UsbPMControl */ |
| , 4, |
| URRE, 1, |
| Offset(0x68), /* MiscEnable68 */ |
| , 3, |
| TMTE, 1, |
| , 1, |
| Offset(0x92), /* GEVENTIN */ |
| , 7, |
| E7IS, 1, |
| Offset(0x96), /* GPM98IN */ |
| G8IS, 1, |
| G9IS, 1, |
| Offset(0x9A), /* EnhanceControl */ |
| ,7, |
| HPDE, 1, |
| Offset(0xA8), /* PIO7654Enable */ |
| IO4E, 1, |
| IO5E, 1, |
| IO6E, 1, |
| IO7E, 1, |
| Offset(0xA9), /* PIO7654Status */ |
| IO4S, 1, |
| IO5S, 1, |
| IO6S, 1, |
| IO7S, 1, |
| } |
| |
| /* PM1 Event Block |
| * First word is PM1_Status, Second word is PM1_Enable |
| */ |
| OperationRegion(P1EB, SystemIO, APEB, 0x04) |
| Field(P1EB, ByteAcc, NoLock, Preserve) { |
| TMST, 1, |
| , 3, |
| BMST, 1, |
| GBST, 1, |
| Offset(0x01), |
| PBST, 1, |
| , 1, |
| RTST, 1, |
| , 3, |
| PWST, 1, |
| SPWS, 1, |
| Offset(0x02), |
| TMEN, 1, |
| , 4, |
| GBEN, 1, |
| Offset(0x03), |
| PBEN, 1, |
| , 1, |
| RTEN, 1, |
| , 3, |
| PWDA, 1, |
| } |
| |
| Scope(\_SB) { |
| |
| /* PCIe Configuration Space for 16 busses */ |
| OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */ |
| Field(PCFG, ByteAcc, NoLock, Preserve) { |
| /* Byte offsets are computed using the following technique: |
| * ((bus number + 1) * ((device number * 8) * 4096)) + register offset |
| * The 8 comes from 8 functions per device, and 4096 bytes per function config space |
| */ |
| Offset(0x00090024), /* Byte offset to SATA register 24h - Bus 0, Device 18, Function 0 */ |
| STB5, 32, |
| Offset(0x00098042), /* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */ |
| PT0D, 1, |
| PT1D, 1, |
| PT2D, 1, |
| PT3D, 1, |
| PT4D, 1, |
| PT5D, 1, |
| PT6D, 1, |
| PT7D, 1, |
| PT8D, 1, |
| PT9D, 1, |
| Offset(0x000A0004), /* Byte offset to SMBUS register 4h - Bus 0, Device 20, Function 0 */ |
| SBIE, 1, |
| SBME, 1, |
| Offset(0x000A0008), /* Byte offset to SMBUS register 8h - Bus 0, Device 20, Function 0 */ |
| SBRI, 8, |
| Offset(0x000A0014), /* Byte offset to SMBUS register 14h - Bus 0, Device 20, Function 0 */ |
| SBB1, 32, |
| Offset(0x000A0078), /* Byte offset to SMBUS register 78h - Bus 0, Device 20, Function 0 */ |
| ,14, |
| P92E, 1, /* Port92 decode enable */ |
| } |
| |
| OperationRegion(SB5, SystemMemory, STB5, 0x1000) |
| Field(SB5, AnyAcc, NoLock, Preserve) |
| { |
| /* Port 0 */ |
| Offset(0x120), /* Port 0 Task file status */ |
| P0ER, 1, |
| , 2, |
| P0DQ, 1, |
| , 3, |
| P0BY, 1, |
| Offset(0x128), /* Port 0 Serial ATA status */ |
| P0DD, 4, |
| , 4, |
| P0IS, 4, |
| Offset(0x12C), /* Port 0 Serial ATA control */ |
| P0DI, 4, |
| Offset(0x130), /* Port 0 Serial ATA error */ |
| , 16, |
| P0PR, 1, |
| |
| /* Port 1 */ |
| offset(0x1A0), /* Port 1 Task file status */ |
| P1ER, 1, |
| , 2, |
| P1DQ, 1, |
| , 3, |
| P1BY, 1, |
| Offset(0x1A8), /* Port 1 Serial ATA status */ |
| P1DD, 4, |
| , 4, |
| P1IS, 4, |
| Offset(0x1AC), /* Port 1 Serial ATA control */ |
| P1DI, 4, |
| Offset(0x1B0), /* Port 1 Serial ATA error */ |
| , 16, |
| P1PR, 1, |
| |
| /* Port 2 */ |
| Offset(0x220), /* Port 2 Task file status */ |
| P2ER, 1, |
| , 2, |
| P2DQ, 1, |
| , 3, |
| P2BY, 1, |
| Offset(0x228), /* Port 2 Serial ATA status */ |
| P2DD, 4, |
| , 4, |
| P2IS, 4, |
| Offset(0x22C), /* Port 2 Serial ATA control */ |
| P2DI, 4, |
| Offset(0x230), /* Port 2 Serial ATA error */ |
| , 16, |
| P2PR, 1, |
| |
| /* Port 3 */ |
| Offset(0x2A0), /* Port 3 Task file status */ |
| P3ER, 1, |
| , 2, |
| P3DQ, 1, |
| , 3, |
| P3BY, 1, |
| Offset(0x2A8), /* Port 3 Serial ATA status */ |
| P3DD, 4, |
| , 4, |
| P3IS, 4, |
| Offset(0x2AC), /* Port 3 Serial ATA control */ |
| P3DI, 4, |
| Offset(0x2B0), /* Port 3 Serial ATA error */ |
| , 16, |
| P3PR, 1, |
| } |
| } |
| |
| #include "acpi/routing.asl" |
| |
| Scope(\_SB) { |
| |
| Method(CkOT, 0){ |
| |
| if(LNotEqual(OSTP, Ones)) {Return(OSTP)} /* OS version was already detected */ |
| |
| if(CondRefOf(\_OSI,Local1)) |
| { |
| Store(1, OSTP) /* Assume some form of XP */ |
| if (\_OSI("Windows 2006")) /* Vista */ |
| { |
| Store(2, OSTP) |
| } |
| } else { |
| If(WCMP(\_OS,"Linux")) { |
| Store(3, OSTP) /* Linux */ |
| } Else { |
| Store(4, OSTP) /* Gotta be WinCE */ |
| } |
| } |
| Return(OSTP) |
| } |
| |
| Method(_PIC, 0x01, NotSerialized) |
| { |
| If (Arg0) |
| { |
| \_SB.CIRQ() |
| } |
| Store(Arg0, PMOD) |
| } |
| |
| Method(CIRQ, 0x00, NotSerialized) |
| { |
| Store(0, PINA) |
| Store(0, PINB) |
| Store(0, PINC) |
| Store(0, PIND) |
| Store(0, PINE) |
| Store(0, PINF) |
| Store(0, PING) |
| Store(0, PINH) |
| } |
| |
| Name(IRQB, ResourceTemplate(){ |
| IRQ(Level,ActiveLow,Shared){15} |
| }) |
| |
| Name(IRQP, ResourceTemplate(){ |
| IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15} |
| }) |
| |
| Name(PITF, ResourceTemplate(){ |
| IRQ(Level,ActiveLow,Exclusive){9} |
| }) |
| |
| Device(INTA) { |
| Name(_HID, EISAID("PNP0C0F")) |
| Name(_UID, 1) |
| |
| Method(_STA, 0) { |
| if (PINA) { |
| Return(0x0B) /* sata is invisible */ |
| } else { |
| Return(0x09) /* sata is disabled */ |
| } |
| } /* End Method(_SB.INTA._STA) */ |
| |
| Method(_DIS ,0) { |
| /* DBGO("\\_SB\\LNKA\\_DIS\n") */ |
| Store(0, PINA) |
| } /* End Method(_SB.INTA._DIS) */ |
| |
| Method(_PRS ,0) { |
| /* DBGO("\\_SB\\LNKA\\_PRS\n") */ |
| Return(IRQP) |
| } /* Method(_SB.INTA._PRS) */ |
| |
| Method(_CRS ,0) { |
| /* DBGO("\\_SB\\LNKA\\_CRS\n") */ |
| CreateWordField(IRQB, 0x1, IRQN) |
| ShiftLeft(1, PINA, IRQN) |
| Return(IRQB) |
| } /* Method(_SB.INTA._CRS) */ |
| |
| Method(_SRS, 1) { |
| /* DBGO("\\_SB\\LNKA\\_CRS\n") */ |
| CreateWordField(ARG0, 1, IRQM) |
| |
| /* Use lowest available IRQ */ |
| FindSetRightBit(IRQM, Local0) |
| if (Local0) { |
| Decrement(Local0) |
| } |
| Store(Local0, PINA) |
| } /* End Method(_SB.INTA._SRS) */ |
| } /* End Device(INTA) */ |
| |
| Device(INTB) { |
| Name(_HID, EISAID("PNP0C0F")) |
| Name(_UID, 2) |
| |
| Method(_STA, 0) { |
| if (PINB) { |
| Return(0x0B) /* sata is invisible */ |
| } else { |
| Return(0x09) /* sata is disabled */ |
| } |
| } /* End Method(_SB.INTB._STA) */ |
| |
| Method(_DIS ,0) { |
| /* DBGO("\\_SB\\LNKB\\_DIS\n") */ |
| Store(0, PINB) |
| } /* End Method(_SB.INTB._DIS) */ |
| |
| Method(_PRS ,0) { |
| /* DBGO("\\_SB\\LNKB\\_PRS\n") */ |
| Return(IRQP) |
| } /* Method(_SB.INTB._PRS) */ |
| |
| Method(_CRS ,0) { |
| /* DBGO("\\_SB\\LNKB\\_CRS\n") */ |
| CreateWordField(IRQB, 0x1, IRQN) |
| ShiftLeft(1, PINB, IRQN) |
| Return(IRQB) |
| } /* Method(_SB.INTB._CRS) */ |
| |
| Method(_SRS, 1) { |
| /* DBGO("\\_SB\\LNKB\\_CRS\n") */ |
| CreateWordField(ARG0, 1, IRQM) |
| |
| /* Use lowest available IRQ */ |
| FindSetRightBit(IRQM, Local0) |
| if (Local0) { |
| Decrement(Local0) |
| } |
| Store(Local0, PINB) |
| } /* End Method(_SB.INTB._SRS) */ |
| } /* End Device(INTB) */ |
| |
| Device(INTC) { |
| Name(_HID, EISAID("PNP0C0F")) |
| Name(_UID, 3) |
| |
| Method(_STA, 0) { |
| if (PINC) { |
| Return(0x0B) /* sata is invisible */ |
| } else { |
| Return(0x09) /* sata is disabled */ |
| } |
| } /* End Method(_SB.INTC._STA) */ |
| |
| Method(_DIS ,0) { |
| /* DBGO("\\_SB\\LNKC\\_DIS\n") */ |
| Store(0, PINC) |
| } /* End Method(_SB.INTC._DIS) */ |
| |
| Method(_PRS ,0) { |
| /* DBGO("\\_SB\\LNKC\\_PRS\n") */ |
| Return(IRQP) |
| } /* Method(_SB.INTC._PRS) */ |
| |
| Method(_CRS ,0) { |
| /* DBGO("\\_SB\\LNKC\\_CRS\n") */ |
| CreateWordField(IRQB, 0x1, IRQN) |
| ShiftLeft(1, PINC, IRQN) |
| Return(IRQB) |
| } /* Method(_SB.INTC._CRS) */ |
| |
| Method(_SRS, 1) { |
| /* DBGO("\\_SB\\LNKC\\_CRS\n") */ |
| CreateWordField(ARG0, 1, IRQM) |
| |
| /* Use lowest available IRQ */ |
| FindSetRightBit(IRQM, Local0) |
| if (Local0) { |
| Decrement(Local0) |
| } |
| Store(Local0, PINC) |
| } /* End Method(_SB.INTC._SRS) */ |
| } /* End Device(INTC) */ |
| |
| Device(INTD) { |
| Name(_HID, EISAID("PNP0C0F")) |
| Name(_UID, 4) |
| |
| Method(_STA, 0) { |
| if (PIND) { |
| Return(0x0B) /* sata is invisible */ |
| } else { |
| Return(0x09) /* sata is disabled */ |
| } |
| } /* End Method(_SB.INTD._STA) */ |
| |
| Method(_DIS ,0) { |
| /* DBGO("\\_SB\\LNKD\\_DIS\n") */ |
| Store(0, PIND) |
| } /* End Method(_SB.INTD._DIS) */ |
| |
| Method(_PRS ,0) { |
| /* DBGO("\\_SB\\LNKD\\_PRS\n") */ |
| Return(IRQP) |
| } /* Method(_SB.INTD._PRS) */ |
| |
| Method(_CRS ,0) { |
| /* DBGO("\\_SB\\LNKD\\_CRS\n") */ |
| CreateWordField(IRQB, 0x1, IRQN) |
| ShiftLeft(1, PIND, IRQN) |
| Return(IRQB) |
| } /* Method(_SB.INTD._CRS) */ |
| |
| Method(_SRS, 1) { |
| /* DBGO("\\_SB\\LNKD\\_CRS\n") */ |
| CreateWordField(ARG0, 1, IRQM) |
| |
| /* Use lowest available IRQ */ |
| FindSetRightBit(IRQM, Local0) |
| if (Local0) { |
| Decrement(Local0) |
| } |
| Store(Local0, PIND) |
| } /* End Method(_SB.INTD._SRS) */ |
| } /* End Device(INTD) */ |
| |
| Device(INTE) { |
| Name(_HID, EISAID("PNP0C0F")) |
| Name(_UID, 5) |
| |
| Method(_STA, 0) { |
| if (PINE) { |
| Return(0x0B) /* sata is invisible */ |
| } else { |
| Return(0x09) /* sata is disabled */ |
| } |
| } /* End Method(_SB.INTE._STA) */ |
| |
| Method(_DIS ,0) { |
| /* DBGO("\\_SB\\LNKE\\_DIS\n") */ |
| Store(0, PINE) |
| } /* End Method(_SB.INTE._DIS) */ |
| |
| Method(_PRS ,0) { |
| /* DBGO("\\_SB\\LNKE\\_PRS\n") */ |
| Return(IRQP) |
| } /* Method(_SB.INTE._PRS) */ |
| |
| Method(_CRS ,0) { |
| /* DBGO("\\_SB\\LNKE\\_CRS\n") */ |
| CreateWordField(IRQB, 0x1, IRQN) |
| ShiftLeft(1, PINE, IRQN) |
| Return(IRQB) |
| } /* Method(_SB.INTE._CRS) */ |
| |
| Method(_SRS, 1) { |
| /* DBGO("\\_SB\\LNKE\\_CRS\n") */ |
| CreateWordField(ARG0, 1, IRQM) |
| |
| /* Use lowest available IRQ */ |
| FindSetRightBit(IRQM, Local0) |
| if (Local0) { |
| Decrement(Local0) |
| } |
| Store(Local0, PINE) |
| } /* End Method(_SB.INTE._SRS) */ |
| } /* End Device(INTE) */ |
| |
| Device(INTF) { |
| Name(_HID, EISAID("PNP0C0F")) |
| Name(_UID, 6) |
| |
| Method(_STA, 0) { |
| if (PINF) { |
| Return(0x0B) /* sata is invisible */ |
| } else { |
| Return(0x09) /* sata is disabled */ |
| } |
| } /* End Method(_SB.INTF._STA) */ |
| |
| Method(_DIS ,0) { |
| /* DBGO("\\_SB\\LNKF\\_DIS\n") */ |
| Store(0, PINF) |
| } /* End Method(_SB.INTF._DIS) */ |
| |
| Method(_PRS ,0) { |
| /* DBGO("\\_SB\\LNKF\\_PRS\n") */ |
| Return(PITF) |
| } /* Method(_SB.INTF._PRS) */ |
| |
| Method(_CRS ,0) { |
| /* DBGO("\\_SB\\LNKF\\_CRS\n") */ |
| CreateWordField(IRQB, 0x1, IRQN) |
| ShiftLeft(1, PINF, IRQN) |
| Return(IRQB) |
| } /* Method(_SB.INTF._CRS) */ |
| |
| Method(_SRS, 1) { |
| /* DBGO("\\_SB\\LNKF\\_CRS\n") */ |
| CreateWordField(ARG0, 1, IRQM) |
| |
| /* Use lowest available IRQ */ |
| FindSetRightBit(IRQM, Local0) |
| if (Local0) { |
| Decrement(Local0) |
| } |
| Store(Local0, PINF) |
| } /* End Method(_SB.INTF._SRS) */ |
| } /* End Device(INTF) */ |
| |
| Device(INTG) { |
| Name(_HID, EISAID("PNP0C0F")) |
| Name(_UID, 7) |
| |
| Method(_STA, 0) { |
| if (PING) { |
| Return(0x0B) /* sata is invisible */ |
| } else { |
| Return(0x09) /* sata is disabled */ |
| } |
| } /* End Method(_SB.INTG._STA) */ |
| |
| Method(_DIS ,0) { |
| /* DBGO("\\_SB\\LNKG\\_DIS\n") */ |
| Store(0, PING) |
| } /* End Method(_SB.INTG._DIS) */ |
| |
| Method(_PRS ,0) { |
| /* DBGO("\\_SB\\LNKG\\_PRS\n") */ |
| Return(IRQP) |
| } /* Method(_SB.INTG._CRS) */ |
| |
| Method(_CRS ,0) { |
| /* DBGO("\\_SB\\LNKG\\_CRS\n") */ |
| CreateWordField(IRQB, 0x1, IRQN) |
| ShiftLeft(1, PING, IRQN) |
| Return(IRQB) |
| } /* Method(_SB.INTG._CRS) */ |
| |
| Method(_SRS, 1) { |
| /* DBGO("\\_SB\\LNKG\\_CRS\n") */ |
| CreateWordField(ARG0, 1, IRQM) |
| |
| /* Use lowest available IRQ */ |
| FindSetRightBit(IRQM, Local0) |
| if (Local0) { |
| Decrement(Local0) |
| } |
| Store(Local0, PING) |
| } /* End Method(_SB.INTG._SRS) */ |
| } /* End Device(INTG) */ |
| |
| Device(INTH) { |
| Name(_HID, EISAID("PNP0C0F")) |
| Name(_UID, 8) |
| |
| Method(_STA, 0) { |
| if (PINH) { |
| Return(0x0B) /* sata is invisible */ |
| } else { |
| Return(0x09) /* sata is disabled */ |
| } |
| } /* End Method(_SB.INTH._STA) */ |
| |
| Method(_DIS ,0) { |
| /* DBGO("\\_SB\\LNKH\\_DIS\n") */ |
| Store(0, PINH) |
| } /* End Method(_SB.INTH._DIS) */ |
| |
| Method(_PRS ,0) { |
| /* DBGO("\\_SB\\LNKH\\_PRS\n") */ |
| Return(IRQP) |
| } /* Method(_SB.INTH._CRS) */ |
| |
| Method(_CRS ,0) { |
| /* DBGO("\\_SB\\LNKH\\_CRS\n") */ |
| CreateWordField(IRQB, 0x1, IRQN) |
| ShiftLeft(1, PINH, IRQN) |
| Return(IRQB) |
| } /* Method(_SB.INTH._CRS) */ |
| |
| Method(_SRS, 1) { |
| /* DBGO("\\_SB\\LNKH\\_CRS\n") */ |
| CreateWordField(ARG0, 1, IRQM) |
| |
| /* Use lowest available IRQ */ |
| FindSetRightBit(IRQM, Local0) |
| if (Local0) { |
| Decrement(Local0) |
| } |
| Store(Local0, PINH) |
| } /* End Method(_SB.INTH._SRS) */ |
| } /* End Device(INTH) */ |
| |
| } /* End Scope(_SB) */ |
| |
| |
| /* Supported sleep states: */ |
| Name(\_S0, Package () {0x00, 0x00, 0x00, 0x00} ) /* (S0) - working state */ |
| |
| If (LAnd(SSFG, 0x01)) { |
| Name(\_S1, Package () {0x01, 0x01, 0x00, 0x00} ) /* (S1) - sleeping w/CPU context */ |
| } |
| If (LAnd(SSFG, 0x02)) { |
| Name(\_S2, Package () {0x02, 0x02, 0x00, 0x00} ) /* (S2) - "light" Suspend to RAM */ |
| } |
| If (LAnd(SSFG, 0x04)) { |
| Name(\_S3, Package () {0x03, 0x03, 0x00, 0x00} ) /* (S3) - Suspend to RAM */ |
| } |
| If (LAnd(SSFG, 0x08)) { |
| Name(\_S4, Package () {0x04, 0x04, 0x00, 0x00} ) /* (S4) - Suspend to Disk */ |
| } |
| |
| Name(\_S5, Package () {0x05, 0x05, 0x00, 0x00} ) /* (S5) - Soft Off */ |
| |
| Name(\_SB.CSPS ,0) /* Current Sleep State (S0, S1, S2, S3, S4, S5) */ |
| Name(CSMS, 0) /* Current System State */ |
| |
| /* Wake status package */ |
| Name(WKST,Package(){Zero, Zero}) |
| |
| /* |
| * \_PTS - Prepare to Sleep method |
| * |
| * Entry: |
| * Arg0=The value of the sleeping state S1=1, S2=2, etc |
| * |
| * Exit: |
| * -none- |
| * |
| * The _PTS control method is executed at the beginning of the sleep process |
| * for S1-S5. The sleeping value is passed to the _PTS control method. This |
| * control method may be executed a relatively long time before entering the |
| * sleep state and the OS may abort the operation without notification to |
| * the ACPI driver. This method cannot modify the configuration or power |
| * state of any device in the system. |
| */ |
| Method(\_PTS, 1) { |
| /* DBGO("\\_PTS\n") */ |
| /* DBGO("From S0 to S") */ |
| /* DBGO(Arg0) */ |
| /* DBGO("\n") */ |
| |
| /* Don't allow PCIRST# to reset USB */ |
| if (LEqual(Arg0,3)){ |
| Store(0,URRE) |
| } |
| |
| /* Clear sleep SMI status flag and enable sleep SMI trap. */ |
| /*Store(One, CSSM) |
| Store(One, SSEN)*/ |
| |
| /* On older chips, clear PciExpWakeDisEn */ |
| /*if (LLessEqual(\_SB.SBRI, 0x13)) { |
| * Store(0,\_SB.PWDE) |
| *} |
| */ |
| |
| /* Clear wake status structure. */ |
| Store(0, Index(WKST,0)) |
| Store(0, Index(WKST,1)) |
| \_SB.PCI0.SIOS (Arg0) |
| } /* End Method(\_PTS) */ |
| |
| /* |
| * The following method results in a "not a valid reserved NameSeg" |
| * warning so I have commented it out for the duration. It isn't |
| * used, so it could be removed. |
| * |
| * |
| * \_GTS OEM Going To Sleep method |
| * |
| * Entry: |
| * Arg0=The value of the sleeping state S1=1, S2=2 |
| * |
| * Exit: |
| * -none- |
| * |
| * Method(\_GTS, 1) { |
| * DBGO("\\_GTS\n") |
| * DBGO("From S0 to S") |
| * DBGO(Arg0) |
| * DBGO("\n") |
| * } |
| */ |
| |
| /* |
| * \_BFS OEM Back From Sleep method |
| * |
| * Entry: |
| * Arg0=The value of the sleeping state S1=1, S2=2 |
| * |
| * Exit: |
| * -none- |
| */ |
| Method(\_BFS, 1) { |
| /* DBGO("\\_BFS\n") */ |
| /* DBGO("From S") */ |
| /* DBGO(Arg0) */ |
| /* DBGO(" to S0\n") */ |
| } |
| |
| /* |
| * \_WAK System Wake method |
| * |
| * Entry: |
| * Arg0=The value of the sleeping state S1=1, S2=2 |
| * |
| * Exit: |
| * Return package of 2 DWords |
| * Dword 1 - Status |
| * 0x00000000 wake succeeded |
| * 0x00000001 Wake was signaled but failed due to lack of power |
| * 0x00000002 Wake was signaled but failed due to thermal condition |
| * Dword 2 - Power Supply state |
| * if non-zero the effective S-state the power supply entered |
| */ |
| Method(\_WAK, 1) { |
| /* DBGO("\\_WAK\n") */ |
| /* DBGO("From S") */ |
| /* DBGO(Arg0) */ |
| /* DBGO(" to S0\n") */ |
| |
| /* Re-enable HPET */ |
| Store(1,HPDE) |
| |
| /* Restore PCIRST# so it resets USB */ |
| if (LEqual(Arg0,3)){ |
| Store(1,URRE) |
| } |
| |
| /* Arbitrarily clear PciExpWakeStatus */ |
| Store(PWST, PWST) |
| |
| /* if(DeRefOf(Index(WKST,0))) { |
| * Store(0, Index(WKST,1)) |
| * } else { |
| * Store(Arg0, Index(WKST,1)) |
| * } |
| */ |
| \_SB.PCI0.SIOW (Arg0) |
| Return(WKST) |
| } /* End Method(\_WAK) */ |
| |
| Scope(\_GPE) { /* Start Scope GPE */ |
| /* General event 0 */ |
| /* Method(_L00) { |
| * DBGO("\\_GPE\\_L00\n") |
| * } |
| */ |
| |
| /* General event 1 */ |
| /* Method(_L01) { |
| * DBGO("\\_GPE\\_L00\n") |
| * } |
| */ |
| |
| /* General event 2 */ |
| /* Method(_L02) { |
| * DBGO("\\_GPE\\_L00\n") |
| * } |
| */ |
| |
| /* General event 3 */ |
| Method(_L03) { |
| /* DBGO("\\_GPE\\_L00\n") */ |
| Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ |
| } |
| |
| /* General event 4 */ |
| /* Method(_L04) { |
| * DBGO("\\_GPE\\_L00\n") |
| * } |
| */ |
| |
| /* General event 5 */ |
| /* Method(_L05) { |
| * DBGO("\\_GPE\\_L00\n") |
| * } |
| */ |
| |
| /* General event 6 - Used for GPM6, moved to USB.asl */ |
| /* Method(_L06) { |
| * DBGO("\\_GPE\\_L00\n") |
| * } |
| */ |
| |
| /* General event 7 - Used for GPM7, moved to USB.asl */ |
| /* Method(_L07) { |
| * DBGO("\\_GPE\\_L07\n") |
| * } |
| */ |
| |
| /* Legacy PM event */ |
| Method(_L08) { |
| /* DBGO("\\_GPE\\_L08\n") */ |
| } |
| |
| /* Temp warning (TWarn) event */ |
| Method(_L09) { |
| /* DBGO("\\_GPE\\_L09\n") */ |
| Notify (\_TZ.TZ00, 0x80) |
| } |
| |
| /* Reserved */ |
| /* Method(_L0A) { |
| * DBGO("\\_GPE\\_L0A\n") |
| * } |
| */ |
| |
| /* USB controller PME# */ |
| Method(_L0B) { |
| /* DBGO("\\_GPE\\_L0B\n") */ |
| Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */ |
| Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */ |
| Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */ |
| Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */ |
| Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */ |
| Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */ |
| Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ |
| } |
| |
| /* AC97 controller PME# */ |
| /* Method(_L0C) { |
| * DBGO("\\_GPE\\_L0C\n") |
| * } |
| */ |
| |
| /* OtherTherm PME# */ |
| /* Method(_L0D) { |
| * DBGO("\\_GPE\\_L0D\n") |
| * } |
| */ |
| |
| /* GPM9 SCI event - Moved to USB.asl */ |
| /* Method(_L0E) { |
| * DBGO("\\_GPE\\_L0E\n") |
| * } |
| */ |
| |
| /* PCIe HotPlug event */ |
| /* Method(_L0F) { |
| * DBGO("\\_GPE\\_L0F\n") |
| * } |
| */ |
| |
| /* ExtEvent0 SCI event */ |
| Method(_L10) { |
| /* DBGO("\\_GPE\\_L10\n") */ |
| } |
| |
| |
| /* ExtEvent1 SCI event */ |
| Method(_L11) { |
| /* DBGO("\\_GPE\\_L11\n") */ |
| } |
| |
| /* PCIe PME# event */ |
| /* Method(_L12) { |
| * DBGO("\\_GPE\\_L12\n") |
| * } |
| */ |
| |
| /* GPM0 SCI event - Moved to USB.asl */ |
| /* Method(_L13) { |
| * DBGO("\\_GPE\\_L13\n") |
| * } |
| */ |
| |
| /* GPM1 SCI event - Moved to USB.asl */ |
| /* Method(_L14) { |
| * DBGO("\\_GPE\\_L14\n") |
| * } |
| */ |
| |
| /* GPM2 SCI event - Moved to USB.asl */ |
| /* Method(_L15) { |
| * DBGO("\\_GPE\\_L15\n") |
| * } |
| */ |
| |
| /* GPM3 SCI event - Moved to USB.asl */ |
| /* Method(_L16) { |
| * DBGO("\\_GPE\\_L16\n") |
| * } |
| */ |
| |
| /* GPM8 SCI event - Moved to USB.asl */ |
| /* Method(_L17) { |
| * DBGO("\\_GPE\\_L17\n") |
| * } |
| */ |
| |
| /* GPIO0 or GEvent8 event */ |
| Method(_L18) { |
| /* DBGO("\\_GPE\\_L18\n") */ |
| Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */ |
| Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */ |
| Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */ |
| Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */ |
| Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */ |
| Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ |
| } |
| |
| /* GPM4 SCI event - Moved to USB.asl */ |
| /* Method(_L19) { |
| * DBGO("\\_GPE\\_L19\n") |
| * } |
| */ |
| |
| /* GPM5 SCI event - Moved to USB.asl */ |
| /* Method(_L1A) { |
| * DBGO("\\_GPE\\_L1A\n") |
| * } |
| */ |
| |
| /* Azalia SCI event */ |
| Method(_L1B) { |
| /* DBGO("\\_GPE\\_L1B\n") */ |
| Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */ |
| Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */ |
| } |
| |
| /* GPM6 SCI event - Reassigned to _L06 */ |
| /* Method(_L1C) { |
| * DBGO("\\_GPE\\_L1C\n") |
| * } |
| */ |
| |
| /* GPM7 SCI event - Reassigned to _L07 */ |
| /* Method(_L1D) { |
| * DBGO("\\_GPE\\_L1D\n") |
| * } |
| */ |
| |
| /* GPIO2 or GPIO66 SCI event */ |
| /* Method(_L1E) { |
| * DBGO("\\_GPE\\_L1E\n") |
| * } |
| */ |
| |
| /* SATA SCI event - Moved to sata.asl */ |
| /* Method(_L1F) { |
| * DBGO("\\_GPE\\_L1F\n") |
| * } |
| */ |
| |
| } /* End Scope GPE */ |
| |
| #include "acpi/usb.asl" |
| |
| /* South Bridge */ |
| Scope(\_SB) { /* Start \_SB scope */ |
| #include <arch/x86/acpi/globutil.asl> /* global utility methods expected within the \_SB scope */ |
| |
| /* _SB.PCI0 */ |
| /* Note: Only need HID on Primary Bus */ |
| Device(PCI0) { |
| External (TOM1) |
| External (TOM2) /* (<real tom2> >> 20) to make it fit into 32 bit for XP */ |
| Name(_HID, EISAID("PNP0A03")) |
| Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ |
| Method(_BBN, 0) { /* Bus number = 0 */ |
| Return(0) |
| } |
| Method(_STA, 0) { |
| /* DBGO("\\_SB\\PCI0\\_STA\n") */ |
| Return(0x0B) /* Status is visible */ |
| } |
| |
| Method(_PRT,0) { |
| If(PMOD){ Return(APR0) } /* APIC mode */ |
| Return (PR0) /* PIC Mode */ |
| } /* end _PRT */ |
| |
| /* Describe the Northbridge devices */ |
| Device(AMRT) { |
| Name(_ADR, 0x00000000) |
| } /* end AMRT */ |
| |
| /* The internal GFX bridge */ |
| Device(AGPB) { |
| Name(_ADR, 0x00010000) |
| Name(_PRW, Package() {0x18, 4}) |
| Method(_PRT,0) { |
| Return (APR1) |
| } |
| } /* end AGPB */ |
| |
| /* The external GFX bridge */ |
| Device(PBR2) { |
| Name(_ADR, 0x00020000) |
| Name(_PRW, Package() {0x18, 4}) |
| Method(_PRT,0) { |
| If(PMOD){ Return(APS2) } /* APIC mode */ |
| Return (PS2) /* PIC Mode */ |
| } /* end _PRT */ |
| } /* end PBR2 */ |
| |
| /* Dev3 is also an external GFX bridge, not used in Herring */ |
| |
| Device(PBR4) { |
| Name(_ADR, 0x00040000) |
| Name(_PRW, Package() {0x18, 4}) |
| Method(_PRT,0) { |
| If(PMOD){ Return(APS4) } /* APIC mode */ |
| Return (PS4) /* PIC Mode */ |
| } /* end _PRT */ |
| } /* end PBR4 */ |
| |
| Device(PBR5) { |
| Name(_ADR, 0x00050000) |
| Name(_PRW, Package() {0x18, 4}) |
| Method(_PRT,0) { |
| If(PMOD){ Return(APS5) } /* APIC mode */ |
| Return (PS5) /* PIC Mode */ |
| } /* end _PRT */ |
| } /* end PBR5 */ |
| |
| Device(PBR6) { |
| Name(_ADR, 0x00060000) |
| Name(_PRW, Package() {0x18, 4}) |
| Method(_PRT,0) { |
| If(PMOD){ Return(APS6) } /* APIC mode */ |
| Return (PS6) /* PIC Mode */ |
| } /* end _PRT */ |
| } /* end PBR6 */ |
| |
| /* The onboard EtherNet chip */ |
| Device(PBR7) { |
| Name(_ADR, 0x00070000) |
| Name(_PRW, Package() {0x18, 4}) |
| Method(_PRT,0) { |
| If(PMOD){ Return(APS7) } /* APIC mode */ |
| Return (PS7) /* PIC Mode */ |
| } /* end _PRT */ |
| } /* end PBR7 */ |
| |
| |
| /* PCI slot 1, 2, 3 */ |
| Device(PIBR) { |
| Name(_ADR, 0x00140004) |
| Name(_PRW, Package() {0x18, 4}) |
| |
| Method(_PRT, 0) { |
| Return (PCIB) |
| } |
| } |
| |
| /* Describe the Southbridge devices */ |
| Device(STCR) { |
| Name(_ADR, 0x00120000) |
| #include "acpi/sata.asl" |
| } /* end STCR */ |
| |
| Device(UOH1) { |
| Name(_ADR, 0x00130000) |
| Name(_PRW, Package() {0x0B, 3}) |
| } /* end UOH1 */ |
| |
| Device(UOH2) { |
| Name(_ADR, 0x00130001) |
| Name(_PRW, Package() {0x0B, 3}) |
| } /* end UOH2 */ |
| |
| Device(UOH3) { |
| Name(_ADR, 0x00130002) |
| Name(_PRW, Package() {0x0B, 3}) |
| } /* end UOH3 */ |
| |
| Device(UOH4) { |
| Name(_ADR, 0x00130003) |
| Name(_PRW, Package() {0x0B, 3}) |
| } /* end UOH4 */ |
| |
| Device(UOH5) { |
| Name(_ADR, 0x00130004) |
| Name(_PRW, Package() {0x0B, 3}) |
| } /* end UOH5 */ |
| |
| Device(UEH1) { |
| Name(_ADR, 0x00130005) |
| Name(_PRW, Package() {0x0B, 3}) |
| } /* end UEH1 */ |
| |
| Device(SBUS) { |
| Name(_ADR, 0x00140000) |
| } /* end SBUS */ |
| |
| /* Primary (and only) IDE channel */ |
| Device(IDEC) { |
| Name(_ADR, 0x00140001) |
| #include "acpi/ide.asl" |
| } /* end IDEC */ |
| |
| Device(AZHD) { |
| Name(_ADR, 0x00140002) |
| OperationRegion(AZPD, PCI_Config, 0x00, 0x100) |
| Field(AZPD, AnyAcc, NoLock, Preserve) { |
| offset (0x42), |
| NSDI, 1, |
| NSDO, 1, |
| NSEN, 1, |
| offset (0x44), |
| IPCR, 4, |
| offset (0x54), |
| PWST, 2, |
| , 6, |
| PMEB, 1, |
| , 6, |
| PMST, 1, |
| offset (0x62), |
| MMCR, 1, |
| offset (0x64), |
| MMLA, 32, |
| offset (0x68), |
| MMHA, 32, |
| offset (0x6C), |
| MMDT, 16, |
| } |
| |
| Method(_INI) { |
| If(LEqual(OSTP,3)){ /* If we are running Linux */ |
| Store(zero, NSEN) |
| Store(one, NSDO) |
| Store(one, NSDI) |
| } |
| } |
| } /* end AZHD */ |
| |
| Device(LIBR) { |
| Name(_ADR, 0x00140003) |
| /* Method(_INI) { |
| * DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n") |
| } */ /* End Method(_SB.SBRDG._INI) */ |
| |
| /* Real Time Clock Device */ |
| Device(RTC0) { |
| Name(_HID, EISAID("PNP0B00")) /* AT Real Time Clock (not PIIX4 compatible) */ |
| Name(_CRS, ResourceTemplate() { |
| IRQNoFlags(){8} |
| IO(Decode16,0x0070, 0x0070, 0, 2) |
| /* IO(Decode16,0x0070, 0x0070, 0, 4) */ |
| }) |
| } /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */ |
| |
| Device(TMR) { /* Timer */ |
| Name(_HID,EISAID("PNP0100")) /* System Timer */ |
| Name(_CRS, ResourceTemplate() { |
| IRQNoFlags(){0} |
| IO(Decode16, 0x0040, 0x0040, 0, 4) |
| /* IO(Decode16, 0x0048, 0x0048, 0, 4) */ |
| }) |
| } /* End Device(_SB.PCI0.LpcIsaBr.TMR) */ |
| |
| Device(SPKR) { /* Speaker */ |
| Name(_HID,EISAID("PNP0800")) /* AT style speaker */ |
| Name(_CRS, ResourceTemplate() { |
| IO(Decode16, 0x0061, 0x0061, 0, 1) |
| }) |
| } /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */ |
| |
| Device(PIC) { |
| Name(_HID,EISAID("PNP0000")) /* AT Interrupt Controller */ |
| Name(_CRS, ResourceTemplate() { |
| IRQNoFlags(){2} |
| IO(Decode16,0x0020, 0x0020, 0, 2) |
| IO(Decode16,0x00A0, 0x00A0, 0, 2) |
| /* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */ |
| /* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */ |
| }) |
| } /* End Device(_SB.PCI0.LpcIsaBr.PIC) */ |
| |
| Device(MAD) { /* 8257 DMA */ |
| Name(_HID,EISAID("PNP0200")) /* Hardware Device ID */ |
| Name(_CRS, ResourceTemplate() { |
| DMA(Compatibility,BusMaster,Transfer8){4} |
| IO(Decode16, 0x0000, 0x0000, 0x10, 0x10) |
| IO(Decode16, 0x0081, 0x0081, 0x01, 0x03) |
| IO(Decode16, 0x0087, 0x0087, 0x01, 0x01) |
| IO(Decode16, 0x0089, 0x0089, 0x01, 0x03) |
| IO(Decode16, 0x008F, 0x008F, 0x01, 0x01) |
| IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20) |
| }) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */ |
| } /* End Device(_SB.PCI0.LpcIsaBr.MAD) */ |
| |
| Device(COPR) { |
| Name(_HID,EISAID("PNP0C04")) /* Math Coprocessor */ |
| Name(_CRS, ResourceTemplate() { |
| IO(Decode16, 0x00F0, 0x00F0, 0, 0x10) |
| IRQNoFlags(){13} |
| }) |
| } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ |
| |
| Device(HPTM) { |
| Name(_HID,EISAID("PNP0103")) |
| Name(CRS,ResourceTemplate() { |
| Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT) /* 1kb reserved space */ |
| }) |
| Method(_STA, 0) { |
| Return(0x0F) /* sata is visible */ |
| } |
| Method(_CRS, 0) { |
| CreateDwordField(CRS, ^HPT._BAS, HPBA) |
| Store(HPBA, HPBA) |
| Return(CRS) |
| } |
| } /* End Device(_SB.PCI0.LpcIsaBr.COPR) */ |
| } /* end LIBR */ |
| |
| Device(HPBR) { |
| Name(_ADR, 0x00140004) |
| } /* end HostPciBr */ |
| |
| Device(ACAD) { |
| Name(_ADR, 0x00140005) |
| } /* end Ac97audio */ |
| |
| Device(ACMD) { |
| Name(_ADR, 0x00140006) |
| } /* end Ac97modem */ |
| |
| /* ITE IT8712F Support */ |
| OperationRegion (IOID, SystemIO, 0x2E, 0x02) /* sometimes it is 0x4E */ |
| Field (IOID, ByteAcc, NoLock, Preserve) |
| { |
| SIOI, 8, SIOD, 8 /* 0x2E and 0x2F */ |
| } |
| |
| IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve) |
| { |
| Offset (0x07), |
| LDN, 8, /* Logical Device Number */ |
| Offset (0x20), |
| CID1, 8, /* Chip ID Byte 1, 0x87 */ |
| CID2, 8, /* Chip ID Byte 2, 0x12 */ |
| Offset (0x30), |
| ACTR, 8, /* Function activate */ |
| Offset (0xF0), |
| APC0, 8, /* APC/PME Event Enable Register */ |
| APC1, 8, /* APC/PME Status Register */ |
| APC2, 8, /* APC/PME Control Register 1 */ |
| APC3, 8, /* Environment Controller Special Configuration Register */ |
| APC4, 8 /* APC/PME Control Register 2 */ |
| } |
| |
| /* Enter the IT8712F MB PnP Mode */ |
| Method (EPNP) |
| { |
| Store(0x87, SIOI) |
| Store(0x01, SIOI) |
| Store(0x55, SIOI) |
| Store(0x55, SIOI) /* IT8712F magic number */ |
| } |
| /* Exit the IT8712F MB PnP Mode */ |
| Method (XPNP) |
| { |
| Store (0x02, SIOI) |
| Store (0x02, SIOD) |
| } |
| |
| /* |
| * Keyboard PME is routed to SB600 Gevent3. We can wake |
| * up the system by pressing the key. |
| */ |
| Method (SIOS, 1) |
| { |
| /* We only enable KBD PME for S5. */ |
| If (LLess (Arg0, 0x05)) |
| { |
| EPNP() |
| /* DBGO("IT8712F\n") */ |
| |
| Store (0x4, LDN) |
| Store (One, ACTR) /* Enable EC */ |
| /* |
| Store (0x4, LDN) |
| Store (0x04, APC4) |
| */ /* falling edge. which mode? Not sure. */ |
| |
| Store (0x4, LDN) |
| Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */ |
| Store (0x4, LDN) |
| Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */ |
| |
| XPNP() |
| } |
| } |
| Method (SIOW, 1) |
| { |
| EPNP() |
| Store (0x4, LDN) |
| Store (Zero, APC0) /* disable keyboard PME */ |
| Store (0x4, LDN) |
| Store (0xFF, APC1) /* clear keyboard PME status */ |
| XPNP() |
| } |
| |
| Name(CRES, ResourceTemplate() { |
| IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) |
| |
| WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, |
| 0x0000, /* address granularity */ |
| 0x0000, /* range minimum */ |
| 0x0CF7, /* range maximum */ |
| 0x0000, /* translation */ |
| 0x0CF8 /* length */ |
| ) |
| |
| WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, |
| 0x0000, /* address granularity */ |
| 0x0D00, /* range minimum */ |
| 0xFFFF, /* range maximum */ |
| 0x0000, /* translation */ |
| 0xF300 /* length */ |
| ) |
| |
| Memory32Fixed(READWRITE, 0, 0xA0000, BSMM) |
| Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) /* VGA memory space */ |
| Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1) /* Assume C0000-E0000 empty */ |
| Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS) /* BIOS ROM area */ |
| |
| /* DRAM Memory from 1MB to TopMem */ |
| Memory32Fixed(READWRITE, 0x00100000, 0, DMLO) /* 1MB to TopMem */ |
| |
| /* BIOS space just below 4GB */ |
| DWORDMemory( |
| ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, |
| 0x00, /* Granularity */ |
| 0x00000000, /* Min */ |
| 0x00000000, /* Max */ |
| 0x00000000, /* Translation */ |
| 0x00000001, /* Max-Min, RLEN */ |
| ,, |
| PCBM |
| ) |
| |
| /* DRAM memory from 4GB to TopMem2 */ |
| QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, |
| 0x00000000, /* Granularity */ |
| 0x00000000, /* Min */ |
| 0x00000000, /* Max */ |
| 0x00000000, /* Translation */ |
| 0x00000001, /* Max-Min, RLEN */ |
| ,, |
| DMHI |
| ) |
| |
| /* BIOS space just below 16EB */ |
| QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, |
| 0x00000000, /* Granularity */ |
| 0x00000000, /* Min */ |
| 0x00000000, /* Max */ |
| 0x00000000, /* Translation */ |
| 0x00000001, /* Max-Min, RLEN */ |
| ,, |
| PEBM |
| ) |
| |
| }) /* End Name(_SB.PCI0.CRES) */ |
| |
| Method(_CRS, 0) { |
| /* DBGO("\\_SB\\PCI0\\_CRS\n") */ |
| |
| CreateDWordField(CRES, ^EMM1._BAS, EM1B) |
| CreateDWordField(CRES, ^EMM1._LEN, EM1L) |
| CreateDWordField(CRES, ^DMLO._BAS, DMLB) |
| CreateDWordField(CRES, ^DMLO._LEN, DMLL) |
| CreateDWordField(CRES, ^PCBM._MIN, PBMB) |
| CreateDWordField(CRES, ^PCBM._LEN, PBML) |
| |
| CreateQWordField(CRES, ^DMHI._MIN, DMHB) |
| CreateQWordField(CRES, ^DMHI._LEN, DMHL) |
| CreateQWordField(CRES, ^PEBM._MIN, EBMB) |
| CreateQWordField(CRES, ^PEBM._LEN, EBML) |
| |
| If(LGreater(LOMH, 0xC0000)){ |
| Store(0xC0000, EM1B) /* Hole above C0000 and below E0000 */ |
| Subtract(LOMH, 0xC0000, EM1L) /* subtract start, assumes allocation from C0000 going up */ |
| } |
| |
| /* Set size of memory from 1MB to TopMem */ |
| Subtract(TOM1, 0x100000, DMLL) |
| |
| /* |
| * If(LNotEqual(TOM2, 0x00000000)){ |
| * Store(0x100000000,DMHB) DRAM from 4GB to TopMem2 |
| * ShiftLeft(TOM2, 20, Local0) |
| * Subtract(Local0, 0x100000000, DMHL) |
| * } |
| */ |
| |
| /* If there is no memory above 4GB, put the BIOS just below 4GB */ |
| If(LEqual(TOM2, 0x00000000)){ |
| Store(PBAD,PBMB) /* Reserve the "BIOS" space */ |
| Store(PBLN,PBML) |
| } |
| Else { /* Otherwise, put the BIOS just below 16EB */ |
| ShiftLeft(PBAD,16,EBMB) /* Reserve the "BIOS" space */ |
| Store(PBLN,EBML) |
| } |
| |
| Return(CRES) /* note to change the Name buffer */ |
| } /* end of Method(_SB.PCI0._CRS) */ |
| |
| /* |
| * |
| * FIRST METHOD CALLED UPON BOOT |
| * |
| * 1. If debugging, print current OS and ACPI interpreter. |
| * 2. Get PCI Interrupt routing from ACPI VSM, this |
| * value is based on user choice in BIOS setup. |
| */ |
| Method(_INI, 0) { |
| /* DBGO("\\_SB\\_INI\n") */ |
| /* DBGO(" DSDT.ASL code from ") */ |
| /* DBGO(__DATE__) */ |
| /* DBGO(" ") */ |
| /* DBGO(__TIME__) */ |
| /* DBGO("\n Sleep states supported: ") */ |
| /* DBGO("\n") */ |
| /* DBGO(" \\_OS=") */ |
| /* DBGO(\_OS) */ |
| /* DBGO("\n \\_REV=") */ |
| /* DBGO(\_REV) */ |
| /* DBGO("\n") */ |
| |
| /* Determine the OS we're running on */ |
| CkOT() |
| |
| /* On older chips, clear PciExpWakeDisEn */ |
| /*if (LLessEqual(\SBRI, 0x13)) { |
| * Store(0,\PWDE) |
| * } |
| */ |
| } /* End Method(_SB._INI) */ |
| } /* End Device(PCI0) */ |
| |
| Device(PWRB) { /* Start Power button device */ |
| Name(_HID, EISAID("PNP0C0C")) |
| Name(_UID, 0xAA) |
| Name(_PRW, Package () {3, 0x04}) /* wake from S1-S4 */ |
| Name(_STA, 0x0B) /* sata is invisible */ |
| } |
| } /* End \_SB scope */ |
| |
| Scope(\_SI) { |
| Method(_SST, 1) { |
| /* DBGO("\\_SI\\_SST\n") */ |
| /* DBGO(" New Indicator state: ") */ |
| /* DBGO(Arg0) */ |
| /* DBGO("\n") */ |
| } |
| } /* End Scope SI */ |
| |
| Mutex (SBX0, 0x00) |
| OperationRegion (SMB0, SystemIO, 0xB00, 0x0C) |
| Field (SMB0, ByteAcc, NoLock, Preserve) { |
| HSTS, 8, /* SMBUS status */ |
| SSTS, 8, /* SMBUS slave status */ |
| HCNT, 8, /* SMBUS control */ |
| HCMD, 8, /* SMBUS host cmd */ |
| HADD, 8, /* SMBUS address */ |
| DAT0, 8, /* SMBUS data0 */ |
| DAT1, 8, /* SMBUS data1 */ |
| BLKD, 8, /* SMBUS block data */ |
| SCNT, 8, /* SMBUS slave control */ |
| SCMD, 8, /* SMBUS shaow cmd */ |
| SEVT, 8, /* SMBUS slave event */ |
| SDAT, 8 /* SMBUS slave data */ |
| } |
| |
| Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */ |
| Store (0x1E, HSTS) |
| Store (0xFA, Local0) |
| While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) { |
| Stall (0x64) |
| Decrement (Local0) |
| } |
| |
| Return (Local0) |
| } |
| |
| Method (SWTC, 1, NotSerialized) { |
| Store (Arg0, Local0) |
| Store (0x07, Local2) |
| Store (One, Local1) |
| While (LEqual (Local1, One)) { |
| Store (And (HSTS, 0x1E), Local3) |
| If (LNotEqual (Local3, Zero)) { /* read sucess */ |
| If (LEqual (Local3, 0x02)) { |
| Store (Zero, Local2) |
| } |
| |
| Store (Zero, Local1) |
| } |
| Else { |
| If (LLess (Local0, 0x0A)) { /* read failure */ |
| Store (0x10, Local2) |
| Store (Zero, Local1) |
| } |
| Else { |
| Sleep (0x0A) /* 10 ms, try again */ |
| Subtract (Local0, 0x0A, Local0) |
| } |
| } |
| } |
| |
| Return (Local2) |
| } |
| |
| Method (SMBR, 3, NotSerialized) { |
| Store (0x07, Local0) |
| If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) { |
| Store (WCLR (), Local0) /* clear SMBUS status register before read data */ |
| If (LEqual (Local0, Zero)) { |
| Release (SBX0) |
| Return (0x0) |
| } |
| |
| Store (0x1F, HSTS) |
| Store (Or (ShiftLeft (Arg1, One), One), HADD) |
| Store (Arg2, HCMD) |
| If (LEqual (Arg0, 0x07)) { |
| Store (0x48, HCNT) /* read byte */ |
| } |
| |
| Store (SWTC (0x03E8), Local1) /* 1000 ms */ |
| If (LEqual (Local1, Zero)) { |
| If (LEqual (Arg0, 0x07)) { |
| Store (DAT0, Local0) |
| } |
| } |
| Else { |
| Store (Local1, Local0) |
| } |
| |
| Release (SBX0) |
| } |
| |
| /* DBGO("the value of SMBusData0 register ") */ |
| /* DBGO(Arg2) */ |
| /* DBGO(" is ") */ |
| /* DBGO(Local0) */ |
| /* DBGO("\n") */ |
| |
| Return (Local0) |
| } |
| |
| /* THERMAL */ |
| Scope(\_TZ) { |
| Name (KELV, 2732) |
| Name (THOT, 800) |
| Name (TCRT, 850) |
| |
| ThermalZone(TZ00) { |
| Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */ |
| /* DBGO("\\_TZ\\TZ00\\_AC0\n") */ |
| Return(Add(0, 2730)) |
| } |
| Method(_AL0,0) { /* Returns package of cooling device to turn on */ |
| /* DBGO("\\_TZ\\TZ00\\_AL0\n") */ |
| Return(Package() {\_TZ.TZ00.FAN0}) |
| } |
| Device (FAN0) { |
| Name(_HID, EISAID("PNP0C0B")) |
| Name(_PR0, Package() {PFN0}) |
| } |
| |
| PowerResource(PFN0,0,0) { |
| Method(_STA) { |
| Store(0xF,Local0) |
| Return(Local0) |
| } |
| Method(_ON) { |
| /* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */ |
| } |
| Method(_OFF) { |
| /* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */ |
| } |
| } |
| |
| Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */ |
| /* DBGO("\\_TZ\\TZ00\\_HOT\n") */ |
| Return (Add (THOT, KELV)) |
| } |
| Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */ |
| /* DBGO("\\_TZ\\TZ00\\_CRT\n") */ |
| Return (Add (TCRT, KELV)) |
| } |
| Method(_TMP,0) { /* return current temp of this zone */ |
| Store (SMBR (0x07, 0x4C,, 0x00), Local0) |
| If (LGreater (Local0, 0x10)) { |
| Store (Local0, Local1) |
| } |
| Else { |
| Add (Local0, THOT, Local0) |
| Return (Add (400, KELV)) |
| } |
| |
| Store (SMBR (0x07, 0x4C, 0x01), Local0) |
| /* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */ |
| /* Store (SMBR (0x07, 0x4C, 0x10), Local2) */ |
| If (LGreater (Local0, 0x10)) { |
| If (LGreater (Local0, Local1)) { |
| Store (Local0, Local1) |
| } |
| |
| Multiply (Local1, 10, Local1) |
| Return (Add (Local1, KELV)) |
| } |
| Else { |
| Add (Local0, THOT, Local0) |
| Return (Add (400 , KELV)) |
| } |
| } /* end of _TMP */ |
| } /* end of TZ00 */ |
| } |
| } |
| /* End of ASL file */ |
