| #Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) |
| #Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) |
| #Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, |
| # 1: the system allows a PCIE link to be established on Dev2 or Dev3. |
| #Define gfx_dual_slot, 0: single slot, 1: dual slot |
| #Define gfx_lane_reversal, 0: disable lane reversal, 1: enable |
| #Define gfx_tmds, 0: didn't support TMDS, 1: support |
| #Define gfx_compliance, 0: didn't support compliance, 1: support |
| #Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration |
| #Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 |
| chip northbridge/amd/amdk8/root_complex |
| device cpu_cluster 0 on |
| chip cpu/amd/socket_S1G1 |
| device lapic 0 on end |
| end |
| end |
| device domain 0 on |
| subsystemid 0x1488 0x6900 inherit |
| chip northbridge/amd/amdk8 |
| device pci 18.0 on # southbridge |
| chip southbridge/amd/rs690 |
| device pci 0.0 on end # HT 0x7910 |
| device pci 1.0 on # Internal Graphics P2P bridge 0x7912 |
| device pci 5.0 on end # Internal Graphics 0x791F |
| end |
| device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913 |
| device pci 3.0 off end # PCIE P2P bridge 0x791b |
| device pci 4.0 on end # PCIE P2P bridge 0x7914 |
| device pci 5.0 on end # PCIE P2P bridge 0x7915 |
| device pci 6.0 on end # PCIE P2P bridge 0x7916 |
| device pci 7.0 on end # PCIE P2P bridge 0x7917 |
| device pci 8.0 off end # NB/SB Link P2P bridge |
| register "gpp_configuration" = "4" |
| register "port_enable" = "0xfc" |
| register "gfx_dev2_dev3" = "1" |
| register "gfx_dual_slot" = "0" |
| register "gfx_lane_reversal" = "0" |
| register "gfx_tmds" = "0" |
| register "gfx_compliance" = "0" |
| register "gfx_reconfiguration" = "1" |
| register "gfx_link_width" = "0" |
| end |
| chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus |
| device pci 12.0 on end # SATA 0x4380 |
| device pci 13.0 on end # USB 0x4387 |
| device pci 13.1 on end # USB 0x4388 |
| device pci 13.2 on end # USB 0x4389 |
| device pci 13.3 on end # USB 0x438a |
| device pci 13.4 on end # USB 0x438b |
| device pci 13.5 on end # USB 2 0x4386 |
| device pci 14.0 on # SM 0x4385 |
| chip drivers/generic/generic #dimm 0-0-0 |
| device i2c 50 on end |
| end |
| chip drivers/generic/generic #dimm 0-0-1 |
| device i2c 51 on end |
| end |
| end # SM |
| device pci 14.1 on end # IDE 0x438c |
| device pci 14.2 on end # HDA 0x4383 |
| device pci 14.3 on # LPC 0x438d |
| chip superio/winbond/w83627dhg |
| device pnp 2e.0 off # Floppy |
| io 0x60 = 0x3f0 |
| irq 0x70 = 6 |
| drq 0x74 = 2 |
| end |
| device pnp 2e.1 off # Parallel Port |
| io 0x60 = 0x378 |
| irq 0x70 = 7 |
| end |
| device pnp 2e.2 on # Com1 |
| io 0x60 = 0x3f8 |
| irq 0x70 = 4 |
| end |
| device pnp 2e.3 on # Com2 |
| io 0x60 = 0x2f8 |
| irq 0x70 = 3 |
| end |
| device pnp 2e.5 on # Keyboard |
| io 0x60 = 0x60 |
| io 0x62 = 0x64 |
| irq 0x70 = 1 |
| end |
| #device pnp 2e.6 off # SPI |
| #end |
| device pnp 2e.307 off # GPIO 1 |
| end |
| device pnp 2e.8 on # WDTO#, PLED |
| end |
| device pnp 2e.009 off # GPIO2 |
| end |
| device pnp 2e.109 off # GPIO3 |
| end |
| device pnp 2e.209 off # GPIO4 |
| end |
| device pnp 2e.309 off # GPIO5 |
| end |
| device pnp 2e.a off # ACPI |
| end |
| device pnp 2e.b on # HWM |
| io 0x60 = 0xa10 |
| end |
| device pnp 2e.c off # PECI, SST |
| end |
| end #superio/winbond/w83627dhg |
| #chip superio/smsc/fdc37n972 |
| # seems this chip is not used? |
| #end |
| end #LPC |
| device pci 14.4 on end # PCI 0x4384 |
| device pci 14.5 on end # ACI 0x4382 |
| device pci 14.6 on end # MCI 0x438e |
| register "hda_viddid" = "0x10ec0888" |
| end #southbridge/amd/sb600 |
| end # device pci 18.0 |
| |
| device pci 18.0 on end |
| device pci 18.0 on end |
| device pci 18.1 on end |
| device pci 18.2 on end |
| device pci 18.3 on end |
| end #northbridge/amd/amdk8 |
| end #domain |
| end #northbridge/amd/amdk8/root_complex |
| |