blob: 31ae610165990897864fb3138e271a753b8f7a9b [file] [log] [blame]
/*
* This file is part of the coreboot project.
*
* Copyright 2013 Google Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <types.h>
#include <stdlib.h>
#include <armv7.h>
#include <cbfs.h>
#include <cbmem.h>
#include <timestamp.h>
#include <arch/cache.h>
#include <soc/samsung/exynos5420/i2c.h>
#include <soc/samsung/exynos5420/clk.h>
#include <soc/samsung/exynos5420/cpu.h>
#include <soc/samsung/exynos5420/dmc.h>
#include <soc/samsung/exynos5420/gpio.h>
#include <soc/samsung/exynos5420/setup.h>
#include <soc/samsung/exynos5420/periph.h>
#include <soc/samsung/exynos5420/power.h>
#include <soc/samsung/exynos5420/trustzone.h>
#include <soc/samsung/exynos5420/wakeup.h>
#include <console/console.h>
#include <arch/stages.h>
#include <drivers/maxim/max77802/max77802.h>
#include <device/i2c.h>
#define PMIC_I2C_BUS 4
struct pmic_write
{
int or_orig; // Whether to or in the original value.
uint8_t reg; // Register to write.
uint8_t val; // Value to write.
};
/*
* Use read-modify-write for MAX77802 control registers and clobber the
* output voltage setting (BUCK?DVS?) registers.
*/
struct pmic_write pmic_writes[] =
{
{ 1, MAX77802_REG_PMIC_32KHZ, MAX77802_32KHCP_EN },
{ 0, MAX77802_REG_PMIC_BUCK1DVS1, MAX77802_BUCK1DVS1_1V },
{ 1, MAX77802_REG_PMIC_BUCK1CTRL, MAX77802_BUCK_TYPE1_ON |
MAX77802_BUCK_TYPE1_IGNORE_PWRREQ },
{ 0, MAX77802_REG_PMIC_BUCK2DVS1, MAX77802_BUCK2DVS1_1_2625V },
{ 1, MAX77802_REG_PMIC_BUCK2CTRL1, MAX77802_BUCK_TYPE2_ON |
MAX77802_BUCK_TYPE2_IGNORE_PWRREQ },
{ 0, MAX77802_REG_PMIC_BUCK3DVS1, MAX77802_BUCK3DVS1_1V },
{ 1, MAX77802_REG_PMIC_BUCK3CTRL1, MAX77802_BUCK_TYPE2_ON |
MAX77802_BUCK_TYPE2_IGNORE_PWRREQ },
{ 0, MAX77802_REG_PMIC_BUCK4DVS1, MAX77802_BUCK4DVS1_1V },
{ 1, MAX77802_REG_PMIC_BUCK4CTRL1, MAX77802_BUCK_TYPE2_ON |
MAX77802_BUCK_TYPE2_IGNORE_PWRREQ },
{ 0, MAX77802_REG_PMIC_BUCK6DVS1, MAX77802_BUCK6DVS1_1V },
{ 1, MAX77802_REG_PMIC_BUCK6CTRL, MAX77802_BUCK_TYPE1_ON |
MAX77802_BUCK_TYPE1_IGNORE_PWRREQ },
/* Disable Boost(bypass) OUTPUT */
{ 0, MAX77802_REG_PMIC_BOOSTCTRL, MAX77802_BOOSTCTRL_OFF},
};
static int setup_power(int is_resume)
{
int error = 0;
int i;
power_init();
if (is_resume) {
return 0;
}
/* Initialize I2C bus to configure PMIC. */
exynos_pinmux_i2c4();
i2c_init(PMIC_I2C_BUS, 1000000, 0x00); /* 1MHz */
for (i = 0; i < ARRAY_SIZE(pmic_writes); i++) {
uint8_t data = 0;
uint8_t reg = pmic_writes[i].reg;
if (pmic_writes[i].or_orig)
error |= i2c_read(4, MAX77802_I2C_ADDR,
reg, sizeof(reg),
&data, sizeof(data));
data |= pmic_writes[i].val;
error |= i2c_write(4, MAX77802_I2C_ADDR,
reg, sizeof(reg),
&data, sizeof(data));
}
return error;
}
static void setup_ec(void)
{
/* SPI2 (EC) is slower and needs to work in half-duplex mode with
* single byte bus width. */
clock_set_rate(PERIPH_ID_SPI2, 5000000);
exynos_pinmux_spi2();
}
static void setup_gpio(void)
{
gpio_direction_input(GPIO_X30); // WP_GPIO
gpio_set_pull(GPIO_X30, GPIO_PULL_NONE);
gpio_direction_input(GPIO_X07); // RECMODE_GPIO
gpio_set_pull(GPIO_X07, GPIO_PULL_UP);
gpio_direction_input(GPIO_X34); // LID_GPIO
gpio_set_pull(GPIO_X34, GPIO_PULL_NONE);
gpio_direction_input(GPIO_X12); // POWER_GPIO
gpio_set_pull(GPIO_X12, GPIO_PULL_NONE);
gpio_set_pull(GPIO_H01, GPIO_PULL_NONE); // SLIM_PD_BUF
gpio_set_pull(GPIO_H03, GPIO_PULL_NONE); // SLIM_CABLE_DET_BUF
}
static void setup_memory(struct mem_timings *mem, int is_resume)
{
printk(BIOS_SPEW, "manufacturer: 0x%x type: 0x%x, div: 0x%x, mhz: %d\n",
mem->mem_manuf,
mem->mem_type,
mem->mpll_mdiv,
mem->frequency_mhz);
if (ddr3_mem_ctrl_init(mem, DMC_INTERLEAVE_SIZE, !is_resume)) {
die("Failed to initialize memory controller.\n");
}
}
#define PRIMITIVE_MEM_TEST 0
#if PRIMITIVE_MEM_TEST
static unsigned long primitive_mem_test(void)
{
unsigned long *l = (void *)0x40000000;
int bad = 0;
unsigned long i;
for(i = 0; i < 256*1048576; i++){
if (! (i%1048576))
printk(BIOS_SPEW, "%lu ...", i);
l[i] = 0xffffffff - i;
}
for(i = 0; i < 256*1048576; i++){
if (! (i%1048576))
printk(BIOS_SPEW, "%lu ...", i);
if (l[i] != (0xffffffff - i)){
printk(BIOS_SPEW, "%p: want %08lx got %08lx\n", l, l[i], 0xffffffff - i);
bad++;
}
}
printk(BIOS_SPEW, "%d errors\n", bad);
return bad;
}
#else
#define primitive_mem_test()
#endif
#define SIMPLE_SPI_TEST 0
#if SIMPLE_SPI_TEST
/* here is a simple SPI debug test, known to fid trouble */
static void simple_spi_test(void)
{
struct cbfs_media default_media, *media;
int i, amt = 4 * MiB, errors = 0;
//u32 *data = (void *)0x40000000;
u32 data[1024];
u32 in;
amt = sizeof(data);
media = &default_media;
if (init_default_cbfs_media(media) != 0) {
printk(BIOS_SPEW, "Failed to initialize default media.\n");
return;
}
media->open(media);
if (media->read(media, data, (size_t) 0, amt) < amt){
printk(BIOS_SPEW, "simple_spi_test fails\n");
return;
}
for(i = 0; i < amt; i += 4){
if (media->read(media, &in, (size_t) i, 4) < 1){
printk(BIOS_SPEW, "simple_spi_test fails at %d\n", i);
return;
}
if (data[i/4] != in){
errors++;
printk(BIOS_SPEW, "BAD at %d(%p):\nRAM %08lx\nSPI %08lx\n",
i, &data[i/4], (unsigned long)data[i/4], (unsigned long)in);
/* reread it to see which is wrong. */
if (media->read(media, &in, (size_t) i, 4) < 1){
printk(BIOS_SPEW, "simple_spi_test fails at %d\n", i);
return;
}
printk(BIOS_SPEW, "RTRY at %d(%p):\nRAM %08lx\nSPI %08lx\n",
i, &data[i/4], (unsigned long)data[i/4], (unsigned long)in);
}
}
printk(BIOS_SPEW, "%d errors\n", errors);
}
#else
#define simple_spi_test()
#endif
void main(void)
{
extern struct mem_timings mem_timings;
void *entry;
int is_resume = (get_wakeup_state() != IS_NOT_WAKEUP);
int power_init_failed;
#if CONFIG_COLLECT_TIMESTAMPS
uint64_t start_romstage_time;
uint64_t before_dram_time;
uint64_t after_dram_time;
uint64_t base_time = timestamp_get();
start_romstage_time = timestamp_get();
#endif
exynos5420_config_smp();
power_init_failed = setup_power(is_resume);
/* Clock must be initialized before console_init, otherwise you may need
* to re-initialize serial console drivers again. */
system_clock_init();
exynos_pinmux_uart3();
console_init();
if (power_init_failed)
die("Failed to intialize power.\n");
/* re-initialize PMIC I2C channel after (re-)setting system clocks */
i2c_init(PMIC_I2C_BUS, 1000000, 0x00); /* 1MHz */
#if CONFIG_COLLECT_TIMESTAMPS
before_dram_time = timestamp_get();
#endif
setup_memory(&mem_timings, is_resume);
#if CONFIG_COLLECT_TIMESTAMPS
after_dram_time = timestamp_get();
#endif
primitive_mem_test();
trustzone_init();
if (is_resume) {
wakeup();
}
setup_gpio();
setup_ec();
simple_spi_test();
/* Set SPI (primary CBFS media) clock to 50MHz. */
/* if this is uncommented SPI will not work correctly. */
clock_set_rate(PERIPH_ID_SPI1, 50000000);
exynos_pinmux_spi1();
simple_spi_test();
cbmem_initialize_empty();
#if CONFIG_COLLECT_TIMESTAMPS
timestamp_init(base_time);
timestamp_add(TS_START_ROMSTAGE, start_romstage_time );
timestamp_add(TS_BEFORE_INITRAM, before_dram_time );
timestamp_add(TS_AFTER_INITRAM, after_dram_time );
#endif
entry = cbfs_load_stage(CBFS_DEFAULT_MEDIA, "fallback/coreboot_ram");
simple_spi_test();
#if CONFIG_COLLECT_TIMESTAMPS
timestamp_add_now(TS_END_ROMSTAGE);
#endif
stage_exit(entry);
}