| source src/northbridge/amd/amdk8/Kconfig |
| source src/northbridge/amd/gx1/Kconfig |
| source src/northbridge/amd/gx2/Kconfig |
| source src/northbridge/amd/amdfam10/Kconfig |
| source src/northbridge/amd/lx/Kconfig |
| source src/northbridge/amd/agesa/Kconfig |
| source src/northbridge/amd/cimx/Kconfig |
| menu "HyperTransport setup" |
| #could be implemented for K8 (NORTHBRIDGE_AMD_AMDK8) |
| depends on (NORTHBRIDGE_AMD_AMDFAM10) && EXPERT |
| |
| choice |
| prompt "HyperTransport frequency" |
| default LIMIT_HT_SPEED_AUTO |
| help |
| This option sets the maximum permissible HyperTransport link |
| frequency. |
| |
| Use of this option will only limit the autodetected HT frequency. |
| It will not (and cannot) increase the frequency beyond the |
| autodetected limits. |
| |
| This is primarily used to work around poorly designed or laid out |
| HT traces on certain motherboards. |
| |
| config LIMIT_HT_SPEED_200 |
| bool "Limit HT frequency to 200MHz" |
| config LIMIT_HT_SPEED_300 |
| bool "Limit HT frequency to 300MHz" |
| config LIMIT_HT_SPEED_400 |
| bool "Limit HT frequency to 400MHz" |
| config LIMIT_HT_SPEED_500 |
| bool "Limit HT frequency to 500MHz" |
| config LIMIT_HT_SPEED_600 |
| bool "Limit HT frequency to 600MHz" |
| config LIMIT_HT_SPEED_800 |
| bool "Limit HT frequency to 800MHz" |
| config LIMIT_HT_SPEED_1000 |
| bool "Limit HT frequency to 1.0GHz" |
| config LIMIT_HT_SPEED_1200 |
| bool "Limit HT frequency to 1.2GHz" |
| config LIMIT_HT_SPEED_1400 |
| bool "Limit HT frequency to 1.4GHz" |
| config LIMIT_HT_SPEED_1600 |
| bool "Limit HT frequency to 1.6GHz" |
| config LIMIT_HT_SPEED_1800 |
| bool "Limit HT frequency to 1.8GHz" |
| config LIMIT_HT_SPEED_2000 |
| bool "Limit HT frequency to 2.0GHz" |
| config LIMIT_HT_SPEED_2200 |
| bool "Limit HT frequency to 2.2GHz" |
| config LIMIT_HT_SPEED_2400 |
| bool "Limit HT frequency to 2.4GHz" |
| config LIMIT_HT_SPEED_2600 |
| bool "Limit HT frequency to 2.6GHz" |
| config LIMIT_HT_SPEED_AUTO |
| bool "Autodetect HT frequency" |
| endchoice |
| |
| choice |
| prompt "HyperTransport downlink width" |
| default LIMIT_HT_DOWN_WIDTH_16 |
| help |
| This option sets the maximum permissible HyperTransport |
| downlink width. |
| |
| Use of this option will only limit the autodetected HT width. |
| It will not (and cannot) increase the width beyond the autodetected |
| limits. |
| |
| This is primarily used to work around poorly designed or laid out HT |
| traces on certain motherboards. |
| |
| config LIMIT_HT_DOWN_WIDTH_8 |
| bool "8 bits" |
| config LIMIT_HT_DOWN_WIDTH_16 |
| bool "16 bits" |
| endchoice |
| |
| choice |
| prompt "HyperTransport uplink width" |
| default LIMIT_HT_UP_WIDTH_16 |
| help |
| This option sets the maximum permissible HyperTransport |
| uplink width. |
| |
| Use of this option will only limit the autodetected HT width. |
| It will not (and cannot) increase the width beyond the autodetected |
| limits. |
| |
| This is primarily used to work around poorly designed or laid out HT |
| traces on certain motherboards. |
| |
| config LIMIT_HT_UP_WIDTH_8 |
| bool "8 bits" |
| config LIMIT_HT_UP_WIDTH_16 |
| bool "16 bits" |
| endchoice |
| |
| endmenu |