config CPU_SAMSUNG_EXYNOS5420
	depends on ARCH_ARM
	select CPU_HAS_BOOTBLOCK_INIT
	select HAVE_MONOTONIC_TIMER
	select HAVE_UART_SPECIAL
	select EARLY_CONSOLE
	select RELOCATABLE_MODULES
	select DYNAMIC_CBMEM
	select CAR_MIGRATION
	bool
	default n

if CPU_SAMSUNG_EXYNOS5420

# ROM image layout.
#
# 0x0000: vendor-provided BL1 (8k).
# 0x2000: variable length bootblock checksum header
# 0x2010: bootblock
#  0x2020-0x20A0: reserved for CBFS master header.
# 0xA000: Free for CBFS data.

config BOOTBLOCK_ROM_OFFSET
	hex
	default 0x2010

config CBFS_HEADER_ROM_OFFSET
	hex "offset of master CBFS header in ROM"
	default 0x2020

config CBFS_ROM_OFFSET
	# Calculated by BOOTBLOCK_ROM_OFFSET + max bootblock size.
	hex "offset of CBFS data in ROM"
	default 0x0A000

config SYS_SDRAM_BASE
	hex
	default 0x20000000

# Example SRAM/iRAM map for Exynos5420 platform:
#
# 0x0202_0000: vendor-provided BL1
# 0x0202_4400: variable length bootblock checksum header.
# 0x0202_4410: bootblock, assume up to 32KB in size
# 0x0203_0000: romstage, assume up to 128KB in size.
# 0x0205_8000: TTB buffer.
# 0x0205_c000: cache for CBFS data.
# 0x0206_f000: stack bottom
# 0x0207_3000: stack pointer
# 0x0207_3000: shared (with kernel) page for cpu & secondary core states.
#              the shared data is currently only <0x50 bytes so we can share
#              this page with stack.

config BOOTBLOCK_BASE
	hex
	default 0x02024410

config ROMSTAGE_BASE
	hex
	default 0x02030000

config RAMSTAGE_BASE
	hex
	default SYS_SDRAM_BASE

# Stack may reside in either IRAM or DRAM. We will define it to live
# at the top of IRAM for now.
#
# Stack grows downward, push operation stores register contents in
# consecutive memory locations ending just below SP.
# The setup in the exynos 5420 is a new one for coreboot. We have got
# the bootblock, romstage, and ramstage sharing the same stack space.
# The SRAM is always there and having a known-good stack memory
# makes for a more reliable setup.
# Thus, in this case:
# STACK_TOP: highest stack address in SRAM
# STACK_BOTTOM: lowest stack address in SRAM
# STACK_SIZE: as in standard coreboot usage, size of thread stacks in ramstage
# ROMSTAGE_STACK_SIZE: size of the single stack in romstage

config STACK_TOP
	hex
	default 0x02073000

config STACK_BOTTOM
	hex
	default 0x0206f000

# STACK_SIZE is for the ramstage core and thread stacks.
# It must be a power of 2, to make the cpu_info computation work,
# and cpu_info needs to work to make SMP startup and threads work.
config STACK_SIZE
	hex
	default 0x0800

# TODO We may probably move this to board-specific implementation files instead
# of KConfig values.
config CBFS_CACHE_ADDRESS
	hex "memory address to put CBFS cache data"
	default 0x0205c000

config CBFS_CACHE_SIZE
	hex "size of CBFS cache data"
	default 0x00013000

config TTB_BUFFER
	hex "memory address of the TTB buffer"
	default 0x02058000

choice CONSOLE_SERIAL_UART_CHOICES
	prompt "Serial Console UART"
	default CONSOLE_SERIAL_UART3
	depends on CONSOLE_SERIAL_UART

config CONSOLE_SERIAL_UART0
	bool "UART0"
	help
	  Serial console on UART0

config CONSOLE_SERIAL_UART1
	bool "UART1"
	help
	  Serial console on UART1

config CONSOLE_SERIAL_UART2
	bool "UART2"
	help
	  Serial console on UART2

config CONSOLE_SERIAL_UART3
	bool "UART3"
	help
	  Serial console on UART3

endchoice

config CONSOLE_SERIAL_UART_ADDRESS
	hex
	depends on CONSOLE_SERIAL_UART
	default 0x12c00000 if CONSOLE_SERIAL_UART0
	default 0x12c10000 if CONSOLE_SERIAL_UART1
	default 0x12c20000 if CONSOLE_SERIAL_UART2
	default 0x12c30000 if CONSOLE_SERIAL_UART3
	help
	  Map the UART names to the respective MMIO address.

endif