#include <console/console.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <string.h>
#include <stdint.h>
#if CONFIG_LOGICAL_CPUS
#include <cpu/amd/multicore.h>
#endif

#include <cpu/amd/amdk8_sysconf.h>
#include <stdlib.h>

// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables
//busnum is default
unsigned char bus_8131_0 = 1;
unsigned char bus_8131_1 = 2;
unsigned char bus_8131_2 = 3;
unsigned char bus_8111_0 = 1;
unsigned char bus_8111_1 = 4;
unsigned char bus_8151_0 = 5;
unsigned char bus_8151_1 = 6;
unsigned apicid_8111 ;
unsigned apicid_8131_1;
unsigned apicid_8131_2;

unsigned pci1234x[] =
{        //Here you only need to set value in pci1234 for HT-IO that could be installed or not
	 //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
        0x0000ff0,
        0x0000ff0,
//        0x0000ff0,
//        0x0000ff0,
//        0x0000ff0,
//        0x0000ff0,
//        0x0000ff0,
//        0x0000ff0
};
unsigned hcdnx[] =
{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
	0x20202020,
	0x20202020,
//        0x20202020,
//        0x20202020,
//        0x20202020,
//        0x20202020,
//        0x20202020,
//        0x20202020,
};
unsigned sbdn3;
unsigned sbdn5;


static unsigned get_bus_conf_done = 0;

void get_bus_conf(void)
{

	unsigned apicid_base;

        device_t dev;
        int i;

        if(get_bus_conf_done==1) return; //do it only once

        get_bus_conf_done = 1;

        sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
        for(i=0;i<sysconf.hc_possible_num; i++) {
                sysconf.pci1234[i] = pci1234x[i];
                sysconf.hcdn[i] = hcdnx[i];
        }

        get_sblk_pci1234();

	sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff;
	sbdn3 = sysconf.hcdn[0] & 0xff;
	sbdn5 = sysconf.hcdn[1] & 0xff;

	bus_8131_0 = (sysconf.pci1234[0] >> 16) & 0xff;
	bus_8111_0 = bus_8131_0;

                /* 8111 */
        dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sysconf.sbdn,0));
        if (dev) {
                bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
        }
	else {
                printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:03.0, using defaults\n", bus_8111_0);
        }

        /* 8131-1 */
        dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0));
        if (dev) {
                bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
        }
        else {
                printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0);
        }

        /* 8132-2 */
        dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,0));
        if (dev) {
                bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
        }
        else {
                printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0);
        }

        /* HT chain 1 */
	// it is on node0, so it must be there
	bus_8151_0 = (sysconf.pci1234[1] >> 16) & 0xff;
        /* 8151 */
	dev = dev_find_slot(bus_8151_0, PCI_DEVFN(sbdn5+1, 0));

        if (dev) {
           	bus_8151_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
//              printk(BIOS_DEBUG, "bus_8151_1=%d\n",bus_8151_1);
       	}

/*I/O APICs:	APIC ID	Version	State		Address*/
#if CONFIG_LOGICAL_CPUS
	apicid_base = get_apicid_base(3);
#else
	apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
#endif
	apicid_8111 = apicid_base+0;
	apicid_8131_1 = apicid_base+1;
	apicid_8131_2 = apicid_base+2;
}