/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2011 Advanced Micro Devices, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
 */
#ifndef BIOS_SIZE
	#define BIOS_SIZE                      0x04   //04 - 1MB
#endif
#define LEGACY_FREE                    0x00
#if !CONFIG_ONBOARD_USB30
  #define XHCI_SUPPORT                 0x01
#endif

//#define ACPI_SLEEP_TRAP                0x01	// No sleep trap smi support in coreboot.
//#define SPREAD_SPECTRUM_EPROM_LOAD     0x01

/**
 * Module Specific Defines for platform BIOS
 *
 */

/**
 * PCIEX_BASE_ADDRESS - Define PCIE base address
 *
 * @param[Option]     MOVE_PCIEBAR_TO_F0000000 Set PCIe base address to 0xF7000000
 */
#ifdef  MOVE_PCIEBAR_TO_F0000000
  #define PCIEX_BASE_ADDRESS           0xF7000000
#else
  #define PCIEX_BASE_ADDRESS           0xE0000000
#endif

/**
 * SMBUS0_BASE_ADDRESS - Smbus base address
 *
 */
#ifndef SMBUS0_BASE_ADDRESS
  #define SMBUS0_BASE_ADDRESS          0xB00
#endif

/**
 * SMBUS1_BASE_ADDRESS - Smbus1 (ASF) base address
 *
 */
#ifndef SMBUS1_BASE_ADDRESS
  #define SMBUS1_BASE_ADDRESS          0xB20
#endif

/**
 * SIO_PME_BASE_ADDRESS - Super IO PME base address
 *
 */
#ifndef SIO_PME_BASE_ADDRESS
  #define SIO_PME_BASE_ADDRESS         0xE00
#endif

/**
 * SPI_BASE_ADDRESS - SPI controller (ROM) base address
 *
 */
#ifndef SPI_BASE_ADDRESS
  #define SPI_BASE_ADDRESS             0xFEC10000
#endif

/**
 * WATCHDOG_TIMER_BASE_ADDRESS - WATCHDOG timer base address
 *
 */
#ifndef WATCHDOG_TIMER_BASE_ADDRESS
  #define WATCHDOG_TIMER_BASE_ADDRESS  0xFEC000F0        // Watchdog Timer Base Address
#endif

/**
 * HPET_BASE_ADDRESS - HPET base address
 *
 */
#ifndef HPET_BASE_ADDRESS
  #define HPET_BASE_ADDRESS            0xFED00000        // HPET Base address
#endif

/**
 * ALT_ADDR_400 - For some BIOS codebases which use 0x400 as ACPI base address
 *
 */
#ifdef ALT_ADDR_400
  #define ACPI_BLK_BASE                0x400
#else
  #define ACPI_BLK_BASE                0x800
#endif

#define PM1_STATUS_OFFSET              0x00
#define PM1_ENABLE_OFFSET              0x02
#define PM1_CONTROL_OFFSET             0x04
#define PM_TIMER_OFFSET                0x08
#define CPU_CONTROL_OFFSET             0x10
#define EVENT_STATUS_OFFSET            0x20
#define EVENT_ENABLE_OFFSET            0x24

/**
 * PM1_EVT_BLK_ADDRESS - ACPI power management Event Block base address
 *
 */
#define PM1_EVT_BLK_ADDRESS           ACPI_BLK_BASE + PM1_STATUS_OFFSET     // AcpiPm1EvtBlkAddr

/**
 * PM1_CNT_BLK_ADDRESS - ACPI power management Control block base address
 *
 */
#define PM1_CNT_BLK_ADDRESS           ACPI_BLK_BASE + PM1_CONTROL_OFFSET    // AcpiPm1CntBlkAddr

/**
 * PM1_TMR_BLK_ADDRESS - ACPI power management Timer block base address
 *
 */
#define PM1_TMR_BLK_ADDRESS           ACPI_BLK_BASE + PM_TIMER_OFFSET       // AcpiPmTmrBlkAddr

/**
 * CPU_CNT_BLK_ADDRESS - ACPI power management CPU Control block base address
 *
 */
#define CPU_CNT_BLK_ADDRESS           ACPI_BLK_BASE + CPU_CONTROL_OFFSET    // CpuControlBlkAddr

/**
 * GPE0_BLK_ADDRESS - ACPI power management General Purpose Event block base address
 *
 */
#define GPE0_BLK_ADDRESS              ACPI_BLK_BASE + EVENT_STATUS_OFFSET   // AcpiGpe0BlkAddr

/**
 * SMI_CMD_PORT - ACPI SMI Command block base address
 *
 */
#define SMI_CMD_PORT                  0xB0              // SmiCmdPortAddr

/**
 * ACPI_PMA_CNT_BLK_ADDRESS - ACPI power management additional control block base address
 *
 */
#define ACPI_PMA_CNT_BLK_ADDRESS      0xFE00            // AcpiPmaCntBlkAddr

/**
 * SATA_IDE_MODE_SSID - Sata controller IDE mode SSID.
 *    Define value for SSID while SATA controller set to IDE mode.
 */
#define SATA_IDE_MODE_SSID           0x78001022
/**
 * SATA_RAID_MODE_SSID - Sata controller RAID mode SSID.
 *    Define value for SSID while SATA controller set to RAID mode.
 */
#define SATA_RAID_MODE_SSID          0x78021022

/**
 * SATA_RAID5_MODE_SSID - Sata controller RAID5 mode SSID.
 *    Define value for SSID while SATA controller set to RAID5 mode.
 */
#define SATA_RAID5_MODE_SSID         0x78031022

/**
 * SATA_AHCI_MODE_SSID - Sata controller AHCI mode SSID.
 *    Define value for SSID while SATA controller set to AHCI mode.
 */
#define SATA_AHCI_SSID               0x78011022

/**
 * OHCI_SSID - All SB OHCI controllers SSID value.
 *
 */
#define OHCI_SSID                    0x78071022

/**
 * EHCI_SSID - All SB EHCI controllers SSID value.
 *
 */
#define EHCI_SSID                    0x78081022

/**
 * OHCI4_SSID - OHCI (USB 1.1 mode *HW force) controllers SSID value.
 *
 */
#define OHCI4_SSID                   0x78091022

/**
 * SMBUS_SSID - Smbus controller (South Bridge device 0x14 function 0) SSID value.
 *
 */
#define SMBUS_SSID                   0x780B1022

/**
 * IDE_SSID - SATA IDE controller (South Bridge device 0x14 function 1) SSID value.
 *
 */
#define IDE_SSID                     0x780C1022

/**
 * AZALIA_SSID - AZALIA controller (South Bridge device 0x14 function 2) SSID value.
 *
 */
#define AZALIA_SSID                  0x780D1022

/**
 * LPC_SSID - LPC controller (South Bridge device 0x14 function 3) SSID value.
 *
 */
#define LPC_SSID                     0x780E1022

/**
 * PCIB_SSID - PCIB controller (South Bridge device 0x14 function 4) SSID value.
 *
 */
#define PCIB_SSID                    0x780F1022