/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2012 Advanced Micro Devices, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
 */

/**
 * @file
 *
 * AMD User options selection for a Brazos platform solution system
 *
 * This file is placed in the user's platform directory and contains the
 * build option selections desired for that platform.
 *
 * For Information about this file, see @ref platforminstall.
 *
 * @xrefitem bom "File Content Label" "Release Content"
 * @e project:      AGESA
 * @e sub-project:  Core
 * @e \$Revision: 23714 $   @e \$Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $
 */

#include "AGESA.h"
//#include "CommonReturns.h"
#include "Filecode.h"
#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE

/*  Select the cpu family.  */
#define INSTALL_FAMILY_10_SUPPORT FALSE
#define INSTALL_FAMILY_12_SUPPORT FALSE
#define INSTALL_FAMILY_14_SUPPORT FALSE
#define INSTALL_FAMILY_15_MODEL_1x_SUPPORT TRUE

/*  Select the cpu socket type.  */
#define INSTALL_G34_SOCKET_SUPPORT  FALSE
#define INSTALL_C32_SOCKET_SUPPORT  FALSE
#define INSTALL_S1G3_SOCKET_SUPPORT FALSE
#define INSTALL_S1G4_SOCKET_SUPPORT FALSE
#define INSTALL_ASB2_SOCKET_SUPPORT FALSE
#define INSTALL_FS1_SOCKET_SUPPORT  TRUE
#define INSTALL_FM1_SOCKET_SUPPORT  FALSE
#define INSTALL_FP2_SOCKET_SUPPORT  TRUE
#define INSTALL_FT1_SOCKET_SUPPORT  FALSE
#define INSTALL_AM3_SOCKET_SUPPORT  FALSE

#define INSTALL_FM2_SOCKET_SUPPORT  FALSE

//#define BLDOPT_REMOVE_UDIMMS_SUPPORT           TRUE
//#define BLDOPT_REMOVE_RDIMMS_SUPPORT           TRUE
#define BLDOPT_REMOVE_LRDIMMS_SUPPORT          TRUE
//#define BLDOPT_REMOVE_ECC_SUPPORT              TRUE
//#define BLDOPT_REMOVE_BANK_INTERLEAVE          TRUE
//#define BLDOPT_REMOVE_DCT_INTERLEAVE           TRUE
#define BLDOPT_REMOVE_NODE_INTERLEAVE          TRUE
#define BLDOPT_REMOVE_PARALLEL_TRAINING        TRUE
#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT     TRUE
//#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT      TRUE
#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT        TRUE
//#define BLDOPT_REMOVE_ACPI_PSTATES             FALSE
#define BLDOPT_REMOVE_SRAT                     FALSE //TRUE
#define BLDOPT_REMOVE_SLIT                     FALSE //TRUE
#define BLDOPT_REMOVE_WHEA                     FALSE //TRUE
#define	BLDOPT_REMOVE_CRAT			TRUE
//#define BLDOPT_REMOVE_DMI                      FALSE //TRUE
//#define BLDOPT_REMOVE_EARLY_SAMPLES            FALSE
//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC               TRUE
//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT               TRUE
//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD               TRUE
//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS               TRUE
//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS              TRUE

//This element selects whether P-States should be forced to be independent,
// as reported by the ACPI _PSD object. For single-link processors,
// setting TRUE for OS to support this feature.

//#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT  TRUE

#define BLDCFG_PCI_MMIO_BASE	CONFIG_MMCONF_BASE_ADDRESS
#define BLDCFG_PCI_MMIO_SIZE	CONFIG_MMCONF_BUS_NUMBER
/* Build configuration values here.
 */
#define BLDCFG_VRM_CURRENT_LIMIT                 90000
#define BLDCFG_VRM_LOW_POWER_THRESHOLD           0
#define BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT          0
#define BLDCFG_PLAT_NUM_IO_APICS                 3
#define BLDCFG_CORE_LEVELING_MODE                CORE_LEVEL_LOWEST
#define BLDCFG_MEM_INIT_PSTATE                   0

#define BLDCFG_AMD_PLATFORM_TYPE                  AMD_PLATFORM_MOBILE

#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT         DDR1866_FREQUENCY
#define BLDCFG_MEMORY_MODE_UNGANGED               TRUE
#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE           TRUE
#define BLDCFG_MEMORY_QUADRANK_TYPE               QUADRANK_UNBUFFERED
#define BLDCFG_MEMORY_RDIMM_CAPABLE               FALSE
#define BLDCFG_MEMORY_UDIMM_CAPABLE               TRUE
#define BLDCFG_MEMORY_SODIMM_CAPABLE              TRUE
#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING    TRUE
#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING    FALSE
#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING        TRUE
#define BLDCFG_MEMORY_POWER_DOWN                  TRUE
#define BLDCFG_POWER_DOWN_MODE                    POWER_DOWN_BY_CHIP_SELECT
#define BLDCFG_ONLINE_SPARE                       FALSE
#define BLDCFG_BANK_SWIZZLE                       TRUE
#define BLDCFG_TIMING_MODE_SELECT                 TIMING_MODE_AUTO
#define BLDCFG_MEMORY_CLOCK_SELECT                DDR1866_FREQUENCY
#define BLDCFG_DQS_TRAINING_CONTROL               TRUE
#define BLDCFG_IGNORE_SPD_CHECKSUM                FALSE
#define BLDCFG_USE_BURST_MODE                     FALSE
#define BLDCFG_MEMORY_ALL_CLOCKS_ON               FALSE
#define BLDCFG_ENABLE_ECC_FEATURE                 TRUE
#define BLDCFG_ECC_REDIRECTION                    FALSE
#define BLDCFG_SCRUB_DRAM_RATE                    0
#define BLDCFG_SCRUB_L2_RATE                      0
#define BLDCFG_SCRUB_L3_RATE                      0
#define BLDCFG_SCRUB_IC_RATE                      0
#define BLDCFG_SCRUB_DC_RATE                      0
#define BLDCFG_ECC_SYMBOL_SIZE                    4
#define BLDCFG_HEAP_DRAM_ADDRESS                  0xB0000
#define BLDCFG_ECC_SYNC_FLOOD                     FALSE
#define BLDCFG_VRM_HIGH_SPEED_ENABLE              TRUE
#define BLDCFG_1GB_ALIGN                          FALSE
#define BLDCFG_VRM_HIGH_SPEED_ENABLE              TRUE
#define BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM        36		// PCIE Spread Spectrum default value 0.36%
#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS    0x1770

#define BLDOPT_REMOVE_ALIB                    FALSE
#define BLDCFG_PLATFORM_CPB_MODE                  CpbModeDisabled
#define BLDCFG_PROCESSOR_SCOPE_NAME0              'P'
#define BLDCFG_PROCESSOR_SCOPE_NAME1              '0'
#define BLDCFG_PLATFORM_CSTATE_MODE               CStateModeC6

#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL         200
#define BLDCFG_CFG_ABM_SUPPORT                    0

//#define BLDCFG_PLATFORM_CSTATE_OPDATA             0x1770

// Specify the default values for the VRM controlling the VDDNB plane.
// If not specified, the values used for the core VRM will be applied
//#define BLDCFG_VRM_NB_CURRENT_LIMIT               0  // Not currently used on Trinity
//#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD         1  // Zero - disable NBPSI_L, Non-zero - enable NBPSI_L
//#define BLDCFG_VRM_NB_SLEW_RATE                   5000 // Used in calculating the VSRampSlamTime
//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY            0  // Not currently used on Trinity
//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE           0  // Not currently used on Trinity
//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT        0  // Not currently used on Trinity

#define BLDCFG_VRM_NB_CURRENT_LIMIT               60000

#define BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON	3
#define BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL	3

#if CONFIG_GFXUMA
#define BLDCFG_UMA_ALIGNMENT                      UMA_4MB_ALIGNED
#define BLDCFG_UMA_ALLOCATION_MODE		  UMA_SPECIFIED
//#define BLDCFG_UMA_ALLOCATION_SIZE      	  0x1000//0x1800//0x1000 /* (1000 << 16) = 256M*/
#define BLDCFG_UMA_ALLOCATION_SIZE      	  0x2000//512M
#define BLDCFG_UMA_ABOVE4G_SUPPORT                FALSE
#endif

#define BLDCFG_IOMMU_SUPPORT    FALSE

#define BLDCFG_CFG_GNB_HD_AUDIO TRUE
//#define BLDCFG_IGPU_SUBSYSTEM_ID            OEM_IGPU_SSID
//#define BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID   OEM_IGPU_HD_AUDIO_SSID
//#define BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID  OEM_APU_PCIE_PORTS_SSID

/*  Process the options...
 * This file include MUST occur AFTER the user option selection settings
 */
#define AGESA_ENTRY_INIT_RESET                    TRUE
#define AGESA_ENTRY_INIT_RECOVERY                 FALSE
#define AGESA_ENTRY_INIT_EARLY                    TRUE
#define AGESA_ENTRY_INIT_POST                     TRUE
#define AGESA_ENTRY_INIT_ENV                      TRUE
#define AGESA_ENTRY_INIT_MID                      TRUE
#define AGESA_ENTRY_INIT_LATE                     TRUE
#define AGESA_ENTRY_INIT_S3SAVE                   TRUE
#define AGESA_ENTRY_INIT_RESUME                   TRUE //TRUE
#define AGESA_ENTRY_INIT_LATE_RESTORE             TRUE
#define AGESA_ENTRY_INIT_GENERAL_SERVICES         TRUE
/*
 * Customized OEM build configurations for FCH component
 */
// #define BLDCFG_SMBUS0_BASE_ADDRESS            0xB00
// #define BLDCFG_SMBUS1_BASE_ADDRESS            0xB20
// #define BLDCFG_SIO_PME_BASE_ADDRESS           0xE00
// #define BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS     0x400
// #define BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS     0x404
// #define BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS      0x408
// #define BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS     0x410
// #define BLDCFG_ACPI_GPE0_BLOCK_ADDRESS        0x420
// #define BLDCFG_SPI_BASE_ADDRESS               0xFEC10000
// #define BLDCFG_WATCHDOG_TIMER_BASE            0xFEC00000
// #define BLDCFG_HPET_BASE_ADDRESS              0xFED00000
// #define BLDCFG_SMI_CMD_PORT_ADDRESS           0xB0
// #define BLDCFG_ACPI_PMA_BLK_ADDRESS           0xFE00
// #define BLDCFG_ROM_BASE_ADDRESS               0xFED61000
// #define BLDCFG_AZALIA_SSID                    0x780D1022
// #define BLDCFG_SMBUS_SSID                     0x780B1022
// #define BLDCFG_IDE_SSID                       0x780C1022
// #define BLDCFG_SATA_AHCI_SSID                 0x78011022
// #define BLDCFG_SATA_IDE_SSID                  0x78001022
// #define BLDCFG_SATA_RAID5_SSID                0x78031022
// #define BLDCFG_SATA_RAID_SSID                 0x78021022
// #define BLDCFG_EHCI_SSID                      0x78081022
// #define BLDCFG_OHCI_SSID                      0x78071022
// #define BLDCFG_LPC_SSID                       0x780E1022
// #define BLDCFG_SD_SSID                        0x78061022
// #define BLDCFG_XHCI_SSID                      0x78121022
// #define BLDCFG_FCH_PORT80_BEHIND_PCIB         FALSE
// #define BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP     TRUE
// #define BLDCFG_FCH_GPP_LINK_CONFIG            PortA4
// #define BLDCFG_FCH_GPP_PORT0_PRESENT          FALSE
// #define BLDCFG_FCH_GPP_PORT1_PRESENT          FALSE
// #define BLDCFG_FCH_GPP_PORT2_PRESENT          FALSE
// #define BLDCFG_FCH_GPP_PORT3_PRESENT          FALSE
// #define BLDCFG_FCH_GPP_PORT0_HOTPLUG          FALSE
// #define BLDCFG_FCH_GPP_PORT1_HOTPLUG          FALSE
// #define BLDCFG_FCH_GPP_PORT2_HOTPLUG          FALSE
// #define BLDCFG_FCH_GPP_PORT3_HOTPLUG          FALSE

CONST AP_MTRR_SETTINGS ROMDATA TrinityApMtrrSettingsList[] =
{
  { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E },
  { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E },
  { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000 },
  { AMD_AP_MTRR_FIX4k_C0000, 0x0000000000000000 },
  { AMD_AP_MTRR_FIX4k_C8000, 0x0000000000000000 },
  { AMD_AP_MTRR_FIX4k_D0000, 0x0000000000000000 },
  { AMD_AP_MTRR_FIX4k_D8000, 0x0000000000000000 },
  { AMD_AP_MTRR_FIX4k_E0000, 0x1818181818181818 },
  { AMD_AP_MTRR_FIX4k_E8000, 0x1818181818181818 },
  { AMD_AP_MTRR_FIX4k_F0000, 0x1818181818181818 },
  { AMD_AP_MTRR_FIX4k_F8000, 0x1818181818181818 },
  { CPU_LIST_TERMINAL }
};

#define BLDCFG_AP_MTRR_SETTINGS_LIST &TrinityApMtrrSettingsList

//#include  "VirgoInstall.h"

/*  Include the files that instantiate the configuration definitions.  */
#include "cpuRegisters.h"
#include "cpuFamRegisters.h"
#include "cpuFamilyTranslation.h"
#include "AdvancedApi.h"
#include "heapManager.h"
#include "CreateStruct.h"
#include "cpuFeatures.h"
#include "Table.h"
#include "CommonReturns.h"
#include "cpuEarlyInit.h"
#include "cpuLateInit.h"
#include "GnbInterface.h"

                  // This is the delivery package title, "BrazosPI"
                  // This string MUST be exactly 8 characters long
#define AGESA_PACKAGE_STRING  {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'}

                  // This is the release version number of the AGESA component
                  // This string MUST be exactly 12 characters long
#define AGESA_VERSION_STRING  {'V', '0', '.', '0', '.', '0', '.', '1', ' ', ' ', ' ', ' '}

/* MEMORY_BUS_SPEED */
#define DDR400_FREQUENCY   200     ///< DDR 400
#define DDR533_FREQUENCY   266     ///< DDR 533
#define DDR667_FREQUENCY   333     ///< DDR 667
#define DDR800_FREQUENCY   400     ///< DDR 800
#define DDR1066_FREQUENCY   533    ///< DDR 1066
#define DDR1333_FREQUENCY   667    ///< DDR 1333
#define DDR1600_FREQUENCY   800    ///< DDR 1600
#define DDR1866_FREQUENCY   933    ///< DDR 1866
#define DDR2100_FREQUENCY   1050   ///< DDR 2100
#define DDR2133_FREQUENCY   1066   ///< DDR 2133
#define DDR2400_FREQUENCY   1200   ///< DDR 2400
#define UNSUPPORTED_DDR_FREQUENCY		1201 ///< Highest limit of DDR frequency

/* QUANDRANK_TYPE*/
#define QUADRANK_REGISTERED				0 ///< Quadrank registered DIMM
#define QUADRANK_UNBUFFERED				1 ///< Quadrank unbuffered DIMM

/* USER_MEMORY_TIMING_MODE */
#define TIMING_MODE_AUTO				0 ///< Use best rate possible
#define TIMING_MODE_LIMITED				1 ///< Set user top limit
#define TIMING_MODE_SPECIFIC			2 ///< Set user specified speed

/* POWER_DOWN_MODE */
#define POWER_DOWN_BY_CHANNEL			0 ///< Channel power down mode
#define POWER_DOWN_BY_CHIP_SELECT		1 ///< Chip select power down mode

/*
 * Agesa optional capabilities selection.
 * Uncomment and mark FALSE those features you wish to include in the build.
 * Comment out or mark TRUE those features you want to REMOVE from the build.
 */

#define DFLT_SMBUS0_BASE_ADDRESS            0xB00
#define DFLT_SMBUS1_BASE_ADDRESS            0xB20
#define DFLT_SIO_PME_BASE_ADDRESS           0xE00
#define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS     0x800
#define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS     0x804
#define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS      0x808
#define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS     0x810
#define DFLT_ACPI_GPE0_BLOCK_ADDRESS        0x820
#define DFLT_SPI_BASE_ADDRESS               0xFEC10000
#define DFLT_WATCHDOG_TIMER_BASE_ADDRESS    0xFEC000F0
#define DFLT_HPET_BASE_ADDRESS              0xFED00000
#define DFLT_SMI_CMD_PORT                   0xB0
#define DFLT_ACPI_PMA_CNT_BLK_ADDRESS       0xFE00
#define DFLT_GEC_BASE_ADDRESS               0xFED61000
#define DFLT_AZALIA_SSID                    0x780D1022
#define DFLT_SMBUS_SSID                     0x780B1022
#define DFLT_IDE_SSID                       0x780C1022
#define DFLT_SATA_AHCI_SSID                 0x78011022
#define DFLT_SATA_IDE_SSID                  0x78001022
#define DFLT_SATA_RAID5_SSID                0x78031022
#define DFLT_SATA_RAID_SSID                 0x78021022
#define DFLT_EHCI_SSID                      0x78081022
#define DFLT_OHCI_SSID                      0x78071022
#define DFLT_LPC_SSID                       0x780E1022
#define DFLT_SD_SSID                        0x78061022
#define DFLT_XHCI_SSID                      0x78121022
#define DFLT_FCH_PORT80_BEHIND_PCIB         FALSE
#define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP     TRUE
#define DFLT_FCH_GPP_LINK_CONFIG            PortA4
#define DFLT_FCH_GPP_PORT0_PRESENT          FALSE
#define DFLT_FCH_GPP_PORT1_PRESENT          FALSE
#define DFLT_FCH_GPP_PORT2_PRESENT          FALSE
#define DFLT_FCH_GPP_PORT3_PRESENT          FALSE
#define DFLT_FCH_GPP_PORT0_HOTPLUG          FALSE
#define DFLT_FCH_GPP_PORT1_HOTPLUG          FALSE
#define DFLT_FCH_GPP_PORT2_HOTPLUG          FALSE
#define DFLT_FCH_GPP_PORT3_HOTPLUG          FALSE
//#define BLDCFG_IR_PIN_CONTROL	0x33
#define FCH_NO_XHCI_SUPPORT			TRUE
GPIO_CONTROL   thatcher_gpio[] = {
	{183, Function1, PullUpB},
	{-1}
};
#define BLDCFG_FCH_GPIO_CONTROL_LIST           (&thatcher_gpio[0])

// The following definitions specify the default values for various parameters in which there are
// no clearly defined defaults to be used in the common file.  The values below are based on product
// and BKDG content, please consult the AGESA Memory team for consultation.
#define DFLT_SCRUB_DRAM_RATE            (0)
#define DFLT_SCRUB_L2_RATE              (0)
#define DFLT_SCRUB_L3_RATE              (0)
#define DFLT_SCRUB_IC_RATE              (0)
#define DFLT_SCRUB_DC_RATE              (0)
#define DFLT_MEMORY_QUADRANK_TYPE       QUADRANK_UNBUFFERED
#define DFLT_VRM_SLEW_RATE              (5000)

#include "PlatformInstall.h"

/*----------------------------------------------------------------------------------------
 *                        CUSTOMER OVERIDES MEMORY TABLE
 *----------------------------------------------------------------------------------------
 */

/*
 *  Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA
 *  (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable
 *  is populated, AGESA will base its settings on the data from the table. Otherwise, it will
 *  use its default conservative settings.
 */
CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
  //
  // The following macros are supported (use comma to separate macros):
  //
  // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap)
  //      The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap.
  //      AGESA will base on this value to disable unused MemClk to save power.
  //      Example:
  //      BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below:
  //           Bit AM3/S1g3 pin name
  //           0   M[B,A]_CLK_H/L[0]
  //           1   M[B,A]_CLK_H/L[1]
  //           2   M[B,A]_CLK_H/L[2]
  //           3   M[B,A]_CLK_H/L[3]
  //           4   M[B,A]_CLK_H/L[4]
  //           5   M[B,A]_CLK_H/L[5]
  //           6   M[B,A]_CLK_H/L[6]
  //           7   M[B,A]_CLK_H/L[7]
  //      And platform has the following routing:
  //           CS0   M[B,A]_CLK_H/L[4]
  //           CS1   M[B,A]_CLK_H/L[2]
  //           CS2   M[B,A]_CLK_H/L[3]
  //           CS3   M[B,A]_CLK_H/L[5]
  //      Then platform can specify the following macro:
  //      MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00)
  //
  // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap)
  //      The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap.
  //      AGESA will base on this value to tristate unused CKE to save power.
  //
  // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap)
  //      The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap.
  //      AGESA will base on this value to tristate unused ODT pins to save power.
  //
  // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap)
  //      The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap.
  //      AGESA will base on this value to tristate unused Chip select to save power.
  //
  // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel)
  //      Specifies the number of DIMM slots per channel.
  //
  // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel)
  //      Specifies the number of Chip selects per channel.
  //
  // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket)
  //      Specifies the number of channels per socket.
  //
  // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED)
  //      Specifies DDR bus speed of channel ChannelID on socket SocketID.
  //
  // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE)
  //      Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...)
  //
  // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed,
  //      Byte6Seed, Byte7Seed, ByteEccSeed)
  //      Specifies the write leveling seed for a channel of a socket.
  //
  // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed,
  //      Byte6Seed, Byte7Seed, ByteEccSeed)
  //      Speicifes the HW RXEN training seed for a channel of a socket
  //
  NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 1),
  NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2),
  MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),
  CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x05, 0x0A),
  ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00),
  CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),

  PSO_END
};

/*
 * These tables are optional and may be used to adjust memory timing settings
 */
#include "mm.h"
#include "mn.h"

// Customer table
UINT8 AGESA_MEM_TABLE_TN[][sizeof (MEM_TABLE_ALIAS)] =
{
 // Hardcoded Memory Training Values

 // The following macro should be used to override training values for your platform
 //
 // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20),
 //
 //   NOTE:
 //   The following training hardcode values are example values that were taken from a tilapia motherboard
 //   with a particular DIMM configuration.  To hardcode your own values, uncomment the appropriate line in
 //   the table and replace the byte lane values with your own.
 //
 //                                                                               ------------------ BYTE LANES ----------------------
 //                                                                                BL0   BL1   BL2   BL3   BL4   BL5   BL6   Bl7   ECC
 // Write Data Timing
 // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0
 // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1
 // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0
 // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1

 // DQS Receiver Enable
 // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
 // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1
 // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0
 // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1

 // Write DQS Delays
 // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
 // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1
 // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0
 // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1

 // Read DQS Delays
 // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0
 // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1
 // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0
 // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1
 //--------------------------------------------------------------------------------------------------------------------------------------------------
 // TABLE END
  NBACCESS (MTEnd, 0,  0, 0, 0, 0),      // End of Table
};
UINT8 SizeOfTableTN = sizeof (AGESA_MEM_TABLE_TN) / sizeof (AGESA_MEM_TABLE_TN[0]);

/* ***************************************************************************
 *   Optional User code to be included into the AGESA build
 *    These may be 32-bit call-out routines...
 */
//AGESA_STATUS
//AgesaReadSpd (
//  IN        UINTN                 FcnData,
//  IN OUT    AGESA_READ_SPD_PARAMS *ReadSpd
//  )
//{
//  /* platform code to read an SPD...  */
//  return Status;
//}