| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2011 Advanced Micro Devices, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| |
| #ifndef _PLATFORM_CFG_H_ |
| #define _PLATFORM_CFG_H_ |
| |
| /** |
| * @def BIOS_SIZE_1M |
| * @def BIOS_SIZE_2M |
| * @def BIOS_SIZE_4M |
| * @def BIOS_SIZE_8M |
| */ |
| #define BIOS_SIZE_1M 0 |
| #define BIOS_SIZE_2M 1 |
| #define BIOS_SIZE_4M 3 |
| #define BIOS_SIZE_8M 7 |
| |
| /* In SB800, default ROM size is 1M Bytes, if your platform ROM |
| * bigger than 1M you have to set the ROM size outside CIMx module and |
| * before AGESA module get call. |
| */ |
| #ifndef BIOS_SIZE |
| #if CONFIG_COREBOOT_ROMSIZE_KB_1024 |
| #define BIOS_SIZE BIOS_SIZE_1M |
| #elif CONFIG_COREBOOT_ROMSIZE_KB_2048 == 1 |
| #define BIOS_SIZE BIOS_SIZE_2M |
| #elif CONFIG_COREBOOT_ROMSIZE_KB_4096 == 1 |
| #define BIOS_SIZE BIOS_SIZE_4M |
| #elif CONFIG_COREBOOT_ROMSIZE_KB_8192 == 1 |
| #define BIOS_SIZE BIOS_SIZE_8M |
| #endif |
| #endif |
| |
| /** |
| * @def SPREAD_SPECTRUM |
| * @brief |
| * 0 - Disable Spread Spectrum function |
| * 1 - Enable Spread Spectrum function |
| */ |
| #define SPREAD_SPECTRUM 0 |
| |
| /** |
| * @def SB_HPET_TIMER |
| * @brief |
| * 0 - Disable hpet |
| * 1 - Enable hpet |
| */ |
| #define HPET_TIMER 1 |
| |
| /** |
| * @def USB_CONFIG |
| * @brief bit[0-6] used to control USB |
| * 0 - Disable |
| * 1 - Enable |
| * Usb Ohci1 Contoller (Bus 0 Dev 18 Func0) is define at BIT0 |
| * Usb Ehci1 Contoller (Bus 0 Dev 18 Func2) is define at BIT1 |
| * Usb Ohci2 Contoller (Bus 0 Dev 19 Func0) is define at BIT2 |
| * Usb Ehci2 Contoller (Bus 0 Dev 19 Func2) is define at BIT3 |
| * Usb Ohci3 Contoller (Bus 0 Dev 22 Func0) is define at BIT4 |
| * Usb Ehci3 Contoller (Bus 0 Dev 22 Func2) is define at BIT5 |
| * Usb Ohci4 Contoller (Bus 0 Dev 20 Func5) is define at BIT6 |
| */ |
| #define USB_CONFIG 0x7F |
| |
| /** |
| * @def PCI_CLOCK_CTRL |
| * @brief bit[0-4] used for PCI Slots Clock Control, |
| * 0 - disable |
| * 1 - enable |
| * PCI SLOT 0 define at BIT0 |
| * PCI SLOT 1 define at BIT1 |
| * PCI SLOT 2 define at BIT2 |
| * PCI SLOT 3 define at BIT3 |
| * PCI SLOT 4 define at BIT4 |
| */ |
| #define PCI_CLOCK_CTRL 0x1F |
| |
| /** |
| * @def SATA_CONTROLLER |
| * @brief INCHIP Sata Controller |
| */ |
| #define SATA_CONTROLLER CIMX_OPTION_ENABLED |
| |
| /** |
| * @def SATA_MODE |
| * @brief INCHIP Sata Controller Mode |
| * NOTE: DO NOT ALLOW SATA & IDE use same mode |
| */ |
| #define SATA_MODE CONFIG_SB800_SATA_MODE |
| |
| /** |
| * @brief INCHIP Sata IDE Controller Mode |
| */ |
| #define IDE_LEGACY_MODE 0 |
| #define IDE_NATIVE_MODE 1 |
| |
| /** |
| * @def SATA_IDE_MODE |
| * @brief INCHIP Sata IDE Controller Mode |
| * NOTE: DO NOT ALLOW SATA & IDE use same mode |
| */ |
| #define SATA_IDE_MODE IDE_LEGACY_MODE |
| |
| /** |
| * @def EXTERNAL_CLOCK |
| * @brief 00/10: Reference clock from crystal oscillator via |
| * PAD_XTALI and PAD_XTALO |
| * |
| * @def INTERNAL_CLOCK |
| * @brief 01/11: Reference clock from internal clock through |
| * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL |
| */ |
| #define EXTERNAL_CLOCK 0x00 |
| #define INTERNAL_CLOCK 0x01 |
| |
| /* NOTE: inagua have to using internal clock, |
| * otherwise can not detect sata drive |
| */ |
| #define SATA_CLOCK_SOURCE INTERNAL_CLOCK |
| |
| /** |
| * @def SATA_PORT_MULT_CAP_RESERVED |
| * @brief 1 ON, 0 0FF |
| */ |
| #define SATA_PORT_MULT_CAP_RESERVED 1 |
| |
| |
| /** |
| * @def AZALIA_AUTO |
| * @brief Detect Azalia controller automatically. |
| * |
| * @def AZALIA_DISABLE |
| * @brief Disable Azalia controller. |
| |
| * @def AZALIA_ENABLE |
| * @brief Enable Azalia controller. |
| */ |
| #define AZALIA_AUTO 0 |
| #define AZALIA_DISABLE 1 |
| #define AZALIA_ENABLE 2 |
| |
| /** |
| * @brief INCHIP HDA controller |
| */ |
| #define AZALIA_CONTROLLER AZALIA_AUTO |
| |
| /** |
| * @def AZALIA_PIN_CONFIG |
| * @brief |
| * 0 - disable |
| * 1 - enable |
| */ |
| #define AZALIA_PIN_CONFIG 1 |
| |
| /** |
| * @def AZALIA_SDIN_PIN |
| * @brief |
| * SDIN0 is define at BIT0 & BIT1 |
| * 00 - GPIO PIN |
| * 01 - Reserved |
| * 10 - As a Azalia SDIN pin |
| * SDIN1 is define at BIT2 & BIT3 |
| * SDIN2 is define at BIT4 & BIT5 |
| * SDIN3 is define at BIT6 & BIT7 |
| */ |
| //#define AZALIA_SDIN_PIN 0xAA |
| #define AZALIA_SDIN_PIN 0x2A |
| |
| /** |
| * @def GPP_CONTROLLER |
| */ |
| #define GPP_CONTROLLER CIMX_OPTION_ENABLED |
| |
| /** |
| * @def GPP_CFGMODE |
| * @brief GPP Link Configuration |
| * four possible configuration: |
| * GPP_CFGMODE_X4000 |
| * GPP_CFGMODE_X2200 |
| * GPP_CFGMODE_X2110 |
| * GPP_CFGMODE_X1111 |
| */ |
| #define GPP_CFGMODE GPP_CFGMODE_X1111 |
| |
| /** |
| * @def NB_SB_GEN2 |
| * 0 - Disable |
| * 1 - Enable |
| */ |
| #define NB_SB_GEN2 TRUE |
| |
| /** |
| * @def SB_GEN2 |
| * 0 - Disable |
| * 1 - Enable |
| */ |
| #define SB_GPP_GEN2 TRUE |
| |
| /** |
| * @def SB_GPP_UNHIDE_PORTS |
| * TRUE - ports visable always, even port empty |
| * FALSE - ports invisable if port empty |
| */ |
| #define SB_GPP_UNHIDE_PORTS FALSE |
| |
| /** |
| * @def GEC_CONFIG |
| * 0 - Enable |
| * 1 - Disable |
| */ |
| #define GEC_CONFIG 0 |
| |
| #endif |
