| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #ifndef SUPERIO_ITE_IT8772F_IT8772F_H |
| #define SUPERIO_ITE_IT8772F_IT8772F_H |
| |
| #define IT8772F_BASE 0x2e |
| |
| #define IT8772F_FDC 0x00 /* Floppy disk controller */ |
| #define IT8772F_SP1 0x01 /* Com1 */ |
| #define IT8772F_EC 0x04 /* Environment controller */ |
| #define IT8772F_KBCK 0x05 /* Keyboard */ |
| #define IT8772F_KBCM 0x06 /* Mouse */ |
| #define IT8772F_GPIO 0x07 /* GPIO */ |
| #define IT8772F_IR 0x0a /* Consumer IR */ |
| |
| /* Environmental Controller interface */ |
| #define IT8772F_INTERFACE_SELECT 0x0a |
| #define IT8772F_INTERFACE_PSEUDO_EOC (1 << 7) |
| #define IT8772F_INTERFACE_SMB_ENABLE (1 << 6) |
| #define IT8772F_INTERFACE_SEL_DISABLE (0 << 4) |
| #define IT8772F_INTERFACE_SEL_SST_SLAVE (1 << 4) |
| #define IT8772F_INTERFACE_SEL_PECI (2 << 4) |
| #define IT8772F_INTERFACE_SEL_SST_HOST (3 << 4) |
| #define IT8772F_INTERFACE_CLOCK_32MHZ (0 << 3) |
| #define IT8772F_INTERFACE_CLOCK_24MHZ (1 << 3) |
| #define IT8772F_INTERFACE_SPEED_TOLERANCE (1 << 2) |
| #define IT8772F_INTERFACE_PECI_AWFCS (1 << 0) |
| #define IT8772F_FAN_TAC2_READ 0x0e |
| #define IT8772F_FAN_TAC3_READ 0x0f |
| #define IT8772F_FAN_MAIN_CTL 0x13 |
| #define IT8772F_FAN_MAIN_CTL_TAC_SMART(x) (1 << ((x)-1)) |
| #define IT8772F_FAN_MAIN_CTL_TAC_EN(x) (1 << ((x)+3)) |
| #define IT8772F_FAN_CTL_MODE 0x14 |
| #define IT8772F_FAN_CTL_ON(x) (1 << ((x)-1)) |
| #define IT8772F_FAN_PWM_MIN_DUTY (1 << 3) |
| #define IT8772F_FAN_PWM_CLOCK_48MHZ (0 << 4) |
| #define IT8772F_FAN_PWM_CLOCK_24MHZ (1 << 4) |
| #define IT8772F_FAN_PWM_CLOCK_8MHZ (3 << 4) |
| #define IT8772F_FAN_PWM_CLOCK_6MHZ (4 << 4) |
| #define IT8772F_FAN_PWM_CLOCK_3MHZ (5 << 4) |
| #define IT8772F_FAN_PWM_CLOCK_1_5MHZ (6 << 4) |
| #define IT8772F_FAN_PWM_CLOCK_51KHZ (7 << 4) |
| #define IT8772F_FAN_CTL_POLARITY_LOW (0 << 7) |
| #define IT8772F_FAN_CTL_POLARITY_HIGH (1 << 7) |
| #define IT8772F_FAN_CTL2_PWM_MODE 0x16 |
| #define IT8772F_FAN_CTL3_PWM_MODE 0x17 |
| #define IT8772F_FAN_CTL_PWM_MODE_SOFTWARE (0 << 7) |
| #define IT8772F_FAN_CTL_PWM_MODE_AUTOMATIC (1 << 7) |
| #define IT8772F_ADC_TEMP_CHANNEL_ENABLE 0x51 |
| #define IT8772F_FAN_CTL2_PWM_START 0x6b |
| #define IT8772F_FAN_CTL2_AUTO_MODE 0x6c |
| #define IT8772F_FAN_CTL3_PWM_START 0x73 |
| #define IT8772F_FAN_CTL3_AUTO_MODE 0x74 |
| #define IT8772F_FAN_CTL_AUTO_SMOOTHING_DIS (0 << 7) |
| #define IT8772F_FAN_CTL_AUTO_SMOOTHING_EN (1 << 7) |
| #define IT8772F_EXTEMP_STATUS 0x88 |
| #define IT8772F_EXTEMP_ADDRESS 0x89 |
| #define IT8772F_EXTEMP_WRITE_LENGTH 0x8a |
| #define IT8772F_EXTEMP_READ_LENGTH 0x8b |
| #define IT8772F_EXTEMP_COMMAND 0x8c |
| #define IT8772F_EXTEMP_WRITE_DATA_2 0x8d |
| #define IT8772F_EXTEMP_CONTROL 0x8e |
| #define IT8772F_EXTEMP_CONTROL_AUTO_32HZ (0 << 6) |
| #define IT8772F_EXTEMP_CONTROL_AUTO_16HZ (1 << 6) |
| #define IT8772F_EXTEMP_CONTROL_AUTO_8HZ (2 << 6) |
| #define IT8772F_EXTEMP_CONTROL_AUTO_4HZ (3 << 6) |
| #define IT8772F_EXTEMP_CONTROL_AUTO_START (1 << 5) |
| #define IT8772F_EXTEMP_CONTROL_AUTO_ABORT (1 << 4) |
| #define IT8772F_EXTEMP_CONTROL_AUTO_TWO_DOMAIN (1 << 3) |
| #define IT8772F_EXTEMP_CONTROL_CONTENTION (1 << 2) |
| #define IT8772F_EXTEMP_CONTROL_SST_IDLE_HIGH (1 << 1) |
| #define IT8772F_EXTEMP_CONTROL_START (1 << 0) |
| |
| /* Standard PECI GetTemp */ |
| #define PECI_CLIENT_ADDRESS 0x30 |
| #define PECI_GETTEMP_COMMAND 0x01 |
| #define PECI_GETTEMP_WRITE_LENGTH 0x01 |
| #define PECI_GETTEMP_READ_LENGTH 0x02 |
| |
| /* GPIO interface */ |
| #define IT8772F_GPIO_LED_BLINK1_PINMAP 0xf8 |
| #define IT8772F_GPIO_LED_BLINK1_CONTROL 0xf9 |
| |
| #define GPIO_REG_SELECT(x) (0x25 + (x)) |
| #define GPIO_REG_POLARITY(x) (0xb0 + (x)) |
| #define GPIO_REG_PULLUP(x) (0xb8 + (x)) |
| #define GPIO_REG_ENABLE(x) (0xc0 + (x)) |
| #define GPIO_REG_OUTPUT(x) (0xc8 + (x)) |
| |
| u8 it8772f_sio_read(u8 index); |
| void it8772f_sio_write(u8 index, u8 value); |
| void it8772f_enable_serial(device_t dev, u16 iobase); |
| void it8772f_kill_watchdog(void); |
| void it8772f_24mhz_clkin(void); |
| void it8772f_enable_3vsbsw(void); |
| void it8772f_ac_resume_southbridge(void); |
| void it8772f_gpio_setup(int set, u8 func_select, u8 polarity, u8 pullup, |
| u8 output, u8 enable); |
| #endif |
